We sew children's winter overalls ourselves. Pattern of overalls for a newborn with a detailed sewing master class
Hello Zimushka-winter!
For children, the new arrival of winter means new fun, new experiences! The quality of these childhood experiences is directly proportional to parental responsibility. In order for the walk to be successful, the child, first of all, needs appropriate clothing. The most suitable option for winter snowball fights, sledding or skiing is, of course, overalls.
Overalls will reliably protect the child from the winter cold, provide comfort and freedom of movement.
We offer you pattern, on which you can sew a jumpsuit as for girl, so for boy.
Finished pattern children's winter overalls
Height 110cm
Bust 56cm.
Children's winter overalls on a straight silhouette heater, optimally voluminous, in the middle of the front there is a zipper, stand collar. The sleeves and legs are gathered at the bottom with an elastic band or cuffs. The belt is worn over the overalls with a snap buckle. There is an elastic band inside the waistband. The jumpsuit can be supplemented with a hood. Hood pattern for this size is in . The hood can be made detachable or sewn into the neck.
Preparing a pattern for work is extremely simple.
Click on the diagram at the end of the article and pattern baby overalls will open in a new window.
Print the pattern sheets on the printer, cut and connect them in accordance with the diagram.
Be sure to check the scale. On a printed sheet with a depicted square of 10x10 cm, the sides of 10 cm should correspond to exactly 10 centimeters.
This pattern can serve as finished pattern, but can be used as basis for modeling. You can apply additional relief lines, add coquettes, pockets, knee pads, etc.
The figure conditionally indicates the finishing inlays on the sleeves and on the legs. You will also determine the location of these beeks yourself, at your discretion. You can refuse them and decorate the jumpsuit in any other way, for example, embroidery or appliqué.
You determine the accent of the product yourself. It can be a combination of contrasting fabrics, piping, inlays, decorative stitching, various accessories, etc.
Stand collar can be made in different variations: fur, fleece, knitwear, etc.
In addition to the main details, it is necessary to cut the belt, the length and width of which you can calculate yourself, depending on the type of buckle-fastener, the width of the elastic band and its elasticity.
Before starting to cut, as always, it is necessary check the pattern. Do not be lazy to take a centimeter and compare the measurements you took with the dimensions of the drawing.
Pattern is given without seam allowances.
The lining and insulation are cut according to the main patterns.
In the following articles we will continue the topic winter clothes for our little clients.
If you have any difficulties with printing patterns, write to us, and we will post a master class with the details of this process.
It's getting colder outside every day. It's time to warm up. Today I want to show you how to sew a children's jumpsuit with your own hands. I sewed this jumpsuit from a ready-made coupon, where the pattern of the right size is already printed. Fabric with a pattern ordered in the store "Bobbin" (patterns on fabric with your prints). Sublimation printing on fabric (I have fleece, you can choose another fabric). The drawing was chosen by my daughter.
This is how the pattern looks on the fabric, the seam allowances are already taken into account (1 cm). Marks are also marked on the fabric. A hood can be ordered instead of a collar.
We cut all the details of the pattern: 2 back details, 2 front details, 2 sleeve details, a collar and 4 cuff details. Cuffs are best sewn from ribana or cashmere. I decided to make a collar from the main fabric, that is, from fleece.
We grind both parts of the back from the wrong side, as shown in the photo below.
We connect the details of the front and back in the shoulder seams.
We straighten the front and back and sew the sleeve into the armhole, combining the marks.
We fold the overalls along the shoulder seams and grind the side seams from the wrong side, including the sleeves and legs (where it is marked with a dotted line).
Then we sew one of the sides of the collar detail to the neck, connecting the marks.
Clips for fixing the fabric can be.
Let's get to the lightning. For a size of 128-134 cm, the length of the zipper = 60 cm. Fold the collar in half and insert the zipper between the layers of fabric.
We sweep and stitch one of the two sides of the zipper along the entire length.
Before basting the second part of the zipper, it is better to make a protective bar for the zipper. Since I made the cuffs from cashmere, the details of the fleece cuffs remained on the coupon. From one part, I cut 2 parts in the form of a semicircle about 5x8 cm in size.
We put these parts on top of each other with the front sides inward and sew, where it is marked with a dotted line.
We turn this part on the front side and sew it to the second part of the zipper in the appropriate place. Moreover, most of the protective bar will be on the wrong side of the zipper.
Then we sweep the second part of the zipper, also bending the collar in half.
We turn and align the corners of the collar. We fasten the zipper and check that everything is even. If everything is smooth, then we sew (sew in) the zipper.
We bend the second edge of the collar and sew it by hand with a blind seam.
On the front side, at the seam next to the collar, you can lay a straight line.
We fasten the zipper and fasten the bottom with a seam. Cut off the excess length of the zipper.
On the front side, we lay a straight line along the entire length of the zipper, where it is marked with a dotted line.
We sew a step seam.
It remains only to sew the cuffs. We bend the details of the cuffs and sew them into a ring with smaller sides.
We bend the cuffs in a circle so that the seams remain inside.
We insert the cuffs, as shown in the photo below and grind in a circle.
The fleece overalls for the daughter are ready.
Veronica is 7 years old, height 127 cm. I took the pattern of overalls for a height of 134 cm - the size fit perfectly.
Baby overalls are very comfortable and practical. The kid can freely run and jump and nothing will hinder his movements, while he does not have to endlessly pull up his pants and tuck in his shirt. And besides, overalls on children look very beautiful. And if you know how to sew at least a little, it’s just a sin not to take the opportunity and not make your own jumpsuit. With love and soul. 🙂
I want to offer several patterns of children's overalls:
- for 6 years
- for 4 years
- for babies 1 year old.
Print sheets of all patterns in life size, i.e. the scale should be 100%.
Pattern of overalls for a girl of 6 years
This pattern is designed for a height of 116 cm. You can download the pattern directly under the photo. For sewing this model, it is best to use light cotton fabrics, it is possible to use mixed materials suitable for the warm season.
How to sew a baby overalls: a short step-by-step instruction
Step 1. Sew the shoulder seams and side seams on the bodice. Iron the allowances.
Step 2. Neck. Finish the neckline with bias tape. The video below simply and clearly explains how this can be done.
Step 3: On the sleeves complete the seams. Pin the sleeve to the cut of the armhole of the faces. side, aligning the seam with the side. To do this, unscrew the allowances of the side seams again. Sew.
Step 4 Sew the side and crotch seams on the trousers.
Step 5. Place the halves of the trousers one on top of the other. parties. With one stitch, sew the front and rear middle. seams. Overcast the allowances together and iron.. Iron the allowances “on the edge” in place of the step rounding.
Step 6. Sew the bodice and the top cut of the trousers. Press seam allowances down and sew. Iron the bottom allowances, tuck and sew.
Pattern of overalls for a child of 4 years
This wonderful jumpsuit comes with not only a pattern, but also a sewing master class.
How to sew a summer jumpsuit for a child: a master class
Step 1. Download and print the pattern. You can see the result in the photo above.
Step 2. Transfer the details to the fabric. 2 top pieces. 4 pieces of shorts - 2 front and 2 back.
Please note that the back of the shorts is higher than the front.
Step 3. Sew the seams on the shorts.
Step 4. Sew the side seams on the top of the jumpsuit (using the example of a dress using a similar top pattern).
Step 5. Stitch in the sleeve.
Step 6. From the wrong side, sew the drawstring along the cut of the neck and the upper cut of the sleeves. Insert rubber band.
Step 7. Connect the top to the bottom, leaving room for the elastic in the waistband. Insert the elastic and the jumpsuit is ready.
Overalls for a 1 year old baby
Materials:
- main fabric: 50cm by 150cm or 1m 90cm wide,
- lining: 25 cm,
- 4 buttons
I sewed this baby overalls for the baby at the end of winter - the beginning of spring, when it is still quite cold outside. Then we were still very young, we only lay on walks, so we wanted to sew warm and comfortable clothes. I took the jumpsuit pattern from the children's clothing magazine Ottobre (No. 4 - 2004), which, in my opinion, is the best magazine for children's clothing patterns.
I sewed in size 68 (according to height), but this pattern can also be sewn in other sizes: 56-62-68-74-80-86.
In detail 3 - from below +2 cm!
The fabric for the overalls is polyester on a synthetic winterizer (quilted), if desired, you can insert another layer of insulation (wool, holofiber). For older children, you can use maida insulation, thinsulate - they are thin, but warm, so they are great for babies who are starting to walk on their own, and they just need light clothing that will not hinder their movements. Lining - cotton, you can knit. Better choose natural fabric because it is in contact with the face and body of the child.
Details (from the main fabric and lining):
1. Breast - 1 child. with a fold.
2. Side inserts in front - 2 children.
3. Back - 2 children.
4. Sleeve - 2 children.
5. Hood - 1 child.
6. Plank - 1 child.
I added a chest pocket and cuffs on the sleeves and legs to cover the legs and arms.
Additionally, I needed two zippers (I took a length of 40 cm, you can 50 cm), Velcro.
I will dwell in more detail on the process of sewing children's overalls. I completed this task in a few evenings))
Pocket.
We sew the main fabric of the pocket with the lining from the wrong side, turn it inside out. We sew along the edge and sew a pocket on the chest.
Lightning. Sew the zippers to the chest, but without lining.
We sweep, then, together with the lining fabric, sew along the front side. Similarly, we sew the second half of the zipper to the side inserts of the front.
If the zippers are detachable, then the zipper connection can be closed with a patch (I used a piece of brown leather).
Back and sleeves. We carry out the middle seam of the back on the main fabric and on the lining separately.
Then we also sew the sleeves along the raglan line to the main fabric and lining.
Sew the crotch and side seams. These parts of the main and lining fabric are sewn separately. Then we turn the lining inside out and insert it inside the overalls.
Hood. We sew the details of the hood, leaving open the edge that is sewn to the neck. Turn inside out, stitch along the edge.
We sew the main fabric of the hood to the collar, and then the lining fabric to hide the seam, sew it with a blind seam or sew it off.
Plank. A strap must be sewn onto the chest so that the neck and hood fit snugly around the neck. We sew the details of the bar, turn it inside out, stitch it out. We sew one half of the Velcro to the ends of the strap, and sew the other half to the hood. The length of the Velcro should be chosen so that you can fasten the bar tighter and weaker.
For sewing overalls I needed:
- (we are 6.5 months old, but I sewed a size 74 jumpsuit for growth);
- 1.2 m of main fabric (I used raincoat fabric);
- 1.2 m of lining fabric (I used fleece as lining fabric);
- 2 m of insulation (we have cold winters, so I made two layers of double synthetic winterizer);
- 2 one-piece zippers 50 cm long;
- 1 cord 80 cm;
- elastic cord 1.5 m;
- 6 clips and 6 lugs for cords.
I added a jumpsuit pattern with boots and mittens (patterns are given in full size):
I also changed the hood trim and zipper lining (see below)
Step 1. When cutting parts from the main fabric, I made the following seam allowances (allowances are given in cm)
When cutting out the details of the lining, I made all allowances for the seams along 1 cm.
I cut out the backing for the zipper in the same way from raincoat fabric and fleece.
Step 2. At the next step, I put the cut out parts (both from the main fabric and the lining part) onto the synthetic winterizer and cut it out exactly along the contour. Each detail turned out to be insulated with padding polyester. For the convenience of sewing in a zipper, I did not cut out the backing under the zipper from a synthetic winterizer, it is better to fill it with a synthetic winterizer later.
Step 3 Since I used raincoat fabric as the main fabric, and it slides over the synthetic winterizer, it is necessary to sweep all the details from the raincoat fabric along the edge so that the synthetic winterizer does not go astray when sewing.
Step 4 Now you need to cut off the excess padding polyester on each part.
Step 5 We lay and tack the folds on the central lower part of the front with a fold, we connect this part with the yoke of the front.
Step 6 We attach to the resulting central front part to the edges (where the zipper will be) strips of fleece (the length of the strip is slightly longer than the length of the zipper, width 3.5 -4 cm). I did this for the convenience of inserting the zipper, and then to cover the zipper so that the heat does not come out of the overalls.
Step 7 Similarly, we attach the same strips of fleece to the sides of the front to the edges (where the zipper will be located)
Step 8 Now we connect the sides of the front and the central front part (along the seams that are located below the cut for the zipper, they are marked in red in the photo). Here's what happens:
Step 9 We make cuts for lightning. In the photo, I put a zipper in the cut to show how it will be sewn in.
Step 10 Sew along the middle seam of the back detail. I sewed an elastic band on the back, stepping back from the edge of the armhole about 2-2.5 cm. The length of the elastic band is 25 cm. Then you can connect the front and back parts of the overalls along the middle seam between the legs.
Step 11 Stitch the sleeves to the front and back of the jumpsuit. We fold the overalls and sew the seam of the sleeve and the side seam of the overalls (one seam). Unfortunately, I did not take a photo of this stage.
Step 12 Let's start sewing the hood. We cut out the edging of the hood (the pattern is given above). I cut it out of artificial white fur, and used fleece for the lining.
Step 13 We draw out the edging of the hood.
Step 14 We cut the seam of the hood, we fasten the edging to it (as shown in the photo).
Step 15 We lay a machine seam, but not where it was just swept away, but stepping back from the running seam by about 1.5 cm. This is necessary in order to insert a lace into this drawstring later to pull the hood. You can make the drawstring for the lace in a different way, as it will be more convenient for you or in your opinion it will be more rational.
Step 16 We grind the details of the hood, cut out of fleece. We put the hoods from the main fabric and from the lining one into the other with the right side inward (as shown in the photo).
Step 17 We sweep away the details of the hood along the front cut (in the photo I hold this place with my hand).
Step 18 Then you need to stitch this seam (shown in red dotted line in the photo).
Step 19 We turn the hood and this is what we got.
Step 20 Place the pieces of the zipper lining right sides inward.
Step 21 We sew a substrate for a lightning. Just do not lay a seam at the junction with the neck, where we will sew the hood (in the photo this place is circled in red).
Step 22 Trim the seam allowance so that you can carefully turn it inside out.
Step 23 Turn the lining right side out and fold over the edge.
Step 24 We combine the substrate for the zipper with the hood: the front side of the substrate - to the front side of the hood, the lining of the hood - to the lining of the substrate. We fasten the lining to the hood and stitch.
The result should be:
Step 25 Now we apply the front side of the hood to the front side of the overalls and sweep them, then stitch them (in the photo the seam is indicated by a red dotted line).
The connection point of the hood, backing for the zipper and overalls:
Step 26
This is how the lightning will be sewn in:
Step 27 We begin to grind the details of the lining of the overalls. I did not sweep the fleece parts along the edge, since the fleece does not slip on the padding polyester.
The stitching algorithm is similar:
- 1. We connect the sidewalls of the front and the central front part.
- 2. We note the cuts for the lightning.
- 3. Sew along the middle seam of the back detail. You don't need to sew a rubber band!
- 4. We connect the front and back parts of the lining along the middle seam between the legs. You do not need to sew the side seams yet, they will be sewn along with the sleeve!
- 5. Stitch the sleeves to the front and back of the lining. We turn the lining and sew the seam of the sleeve and the side seam of the lining (one seam).
Here is what happens at this step:
Step 28 On the sleeves and on the legs I made drawstrings for elastic. To do this, it is necessary to cut out strips from the main fabric, the width of the strip is 4-5 cm, in order to determine the length, we measure the length of the cut of the sleeve and leg with a centimeter tape and make an increase for the seam (I hope I put it clearly, maybe it will be clearer in the photo). We build from the sides so that there are neat edges at the drawstring.
Step 29 We fasten the drawstrings to the sleeves and trousers.
Step 30 We grind the side parts of the boots, tack them to the legs of the overalls and attach them.
Step 31 We take and attach the trace.
Step 32
Step 33 We sweep and grind mittens.
Step 34 We insert the mitten into the sleeve, tack and grind.
Step 35 We twist. Here's what we got:
Steps 30-35 are repeated for the lining of the overalls.
Step 36 At this stage, the jumpsuit looks like this:
Step 37 We combine the front side of the lining of the overalls and the front side of the lining of the hood, sweep them and sew (in the photo the seam is indicated by a red dotted line).
Here's what happened:
Step 38 We connect the front side of the coquette from the main fabric with the front side of the lining coquette, we sweep and sew.
We twist. Here's what happened:
Step 39 We insert the lining into the overalls. We make stitches manually in several places, thereby connecting the overalls from the main fabric and the lining (the stitches should be free). This is necessary so that the lining does not stray. Be sure to connect the boots and mittens, the rest is up to you, but it is better to connect in several more places, so the lining will be securely fixed in the overalls.
Step 40 We insert the zipper into the cut, we fasten it to the front side of the overalls (we do not touch the lining yet). It is desirable that the teeth of the zipper be covered with a cloth.
Step 41 Attaching the zipper. My fabric shifted a little during sewing, so the zipper teeth were not completely covered by the fabric, although I expected them to be completely closed. But it's okay, the substrate for the lightning in this case will save us, it is quite wide, inserted from the inside, so it will block the lightning and will be pressed against it.
Step 42 We fasten the lining to the zipper from the wrong side of the overalls (on the one hand we fasten to the substrate for the zipper, on the other hand to the zipper itself)
Step 43 We undermine the seam of the substrate for the zipper and stuff it with padding polyester, but not very tight. Then we sew this place with hidden stitches.
Step 44 We insert the lace into the drawstring of the hood, sew the button to the substrates for the zipper.
Attention! Make sure that when the underlays for the zipper are fastened with a button and the zippers on the overalls are fastened, the yoke should fit snugly against the underlays, otherwise there will be a free space and heat will come out of the overalls.
Step 45 We insert the elastic bands into the drawstrings on the sleeves and legs (you can insert the laces as you like). They play more of a decorative function.
The jumpsuit is ready!
Daughter in new overalls!
