Big balloon teddy bear. Unique DIY balloon toy DIY balloon bear
If you have already mastered the simplest figurines and make all kinds of pirate sabers, dogs and giraffes with a confident hand, it's time to move on to more complicated figurines. We offer another "air" master class - a figure of such a cute little bear.
We pump up the ball. 
Tie the end of the ball. 
It's funny, but there is nothing accidental here, and even the resulting knot will not need to be hidden - it will become the nose of our bear. 
When inflating the balloon, do not forget to leave a tail for twists. In our case, it should be at least ten centimeters. 
We start forming the figure from the knot. Making the first small bubble. 
The second should be even smaller. Here is such a round little ball: 
The third one is longer, but not too long. 
The fourth bubble is equal to the second. 
Fifth to third. 
Sixth - second and fourth. 
And the seventh to the third and fifth bubbles. We should get such an original design that looks like beads or a caterpillar: 
We firmly hold our "caterpillar" so that it does not bloom. Now we connect the second twist with the last one, modeling such a triangular window with two small and three oblong bubbles: 
Twist while holding firmly the first two bubbles. 
Then we work inside this triangular window: we pull off small bubbles with the thumb and forefinger. 
And several times we twist around ourselves, forming such a small shell - an ear: 
The teddy bear's ears are ready. 
Now gently push the first bubble into the triangular hole. 
Look what a cute bear we get! 
We make a bear cub neck - a small round bubble. 
We measure a small loop - foot. 
And we twist. 
The second same loop will become the second foot. 
We model the tummy. 
And similarly to the previous ones, we form the remaining two paws. 
The tip of the balloon becomes a tiny ponytail. 
Meet, a new figurine of your collection is ready - a bright cheerful teddy bear! 
A wonderful souvenir gift, original and cute, most importantly, made with my own hands with love! Happiness to you and fun minutes (hours, days, years, centuries) with your loved one!
Teddy bear with a heart.
Materials:
Ball-sausage and ball-heart.
Step-by-step master class from the Creative workshop "Inflators".:
- 1. Take a bright red 5-inch heart balloon, inflate it and tie it.
Now we will make a bear cub that will hold this ball in its paws.
in front of you full scheme teddy bear twist. Do not be afraid of their number, but just carefully read the further instructions and look at the photos, consistently performing all the steps.
- 2. Take a long ball (sausage), for example, pale purple or blue color, inflate, leaving the 10-12 cm tip uninflated.
- 3. Then we twist seven bubbles in succession: 3 centimeters (nose), 3 centimeters (nape), 5 cm (cheek), 3 cm (ear), 4 cm (forehead), 3 cm (ear), 5 cm (cheek). The main rule is to twist all the time in one direction, constantly holding the first and penultimate bubbles with the fingers of your left hand (remember, you have as many as five of them! Hold the penultimate bubble with your thumb and forefinger, and use the rest to support the first bubble, the rest of the bubbles hang between them) , and hold the last of the swirling bubbles with your fingers right hand, while twisting this bubble three times with the right hand. If this is not done, then the bubbles will unwind (this may not work right away, practice!).
- 4. We twist two 5-cm bubbles with a lock to make a loop of 5 bubbles (now these five bubbles will not unwind, hold only two bubbles - the nose and the back of the head),
- 5. put the bear's nose into this loop (so that the back of the head does not stick behind it, but stays behind!),
- 6. then we twist the ears with a technique that is called the “ear” (with one hand we press the forehead and cheek to each other, and with the other, pulling the bubble of the ear with the thumb and forefinger, we twist this bubble, preferably twice (so that it certainly does not unwind). first with the right ear, then with the left.
Here is the muzzle ready! If you succeeded, the rest is quite simple.
- 7. We twist the 3 cm neck, and then make a large 20 cm bubble, folded in half and twisted into a loop with a lock, these will be the front paws of the bear. Then we make a 5-6 cm bubble for the body, and then two more 6 cm bubbles for the hind legs, we twist them into a “lock”. A small bubble will remain.
- 8. Now take a red 5 inch heart balloon. Let's put it in the front paws of the bear, as if the bear is hugging him. We will tie the knot on the heart-ball (you can simply wrap it) to the twist in front of the hind legs. A teddy bear with a heart in its paws is ready!
You can find other lessons and master classes on modeling toys from balloons on the website of the Creative Workshop "Inflators"
Big teddy bear from balloons - perfect choice to graduation party. A huge figure in combination with the whole composition will create a solemn mood and emphasize the weight and scale of the holiday. Delicate colors inspire a feeling of lightness. This design will not leave anyone indifferent and will make your holiday memorable.
A great solution is to make a big Teddy out of balloons like Daria Pynzar herself. Having made such an order, you will not regret a second. It is guaranteed to captivate the hearts of adults and children of all ages. If you are thinking about how to decorate the festive space in the most spectacular, non-standard and unhackneyed way, then choose this option.
The first birthday is a unique event. It is one of those dates that you want to remember forever. It is clear that the event should be celebrated with pomp. Loving parents usually do not skimp on stylish and spectacular decor, and experienced designers will make for you such a teddy bear that you can only wish for.
The Teddy bear from the site is perfect for absolutely any graduation, whether it's graduation in kindergarten, school or university. Children are children, and even if they have grown a little, beloved with early age The toy is sure to make the most indelible impression on them.
Teddy bear for a children's photo shoot
A 1 year old Teddy bear for a photo shoot is the perfect choice for parents who love their child. Each period of a baby's life is unique and unique, and therefore it is absolutely necessary to capture it in a photo. Pictures that you take yourself are, of course, good, but professional photo shoots must also be in your home collection. Your baby will never be a year old again. High-quality pictures together with parents will replenish the family collection and become a source of pleasant memories for a long time.
A large ball for a photo shoot is decorated in the most gentle and light colors. That is why this choice is ideal for kids. You can not only have a photo session against the background of the composition presented in the catalog, but also order it for a birthday party. Guests and invitees will surely appreciate such an impressive decor.
Why it is worth ordering in the Planet of balls
Planet of balls:
- quickly and at the highest quality level will fulfill the order for you, despite its scale;
- will offer really reasonable and acceptable prices that will surely please you;
- will deliver the order to the specified address as quickly as possible;
- advise on the design of the premises.
You can choose both the composition that you see on the page, and absolutely any option of your choice. If you like the teddy bear presented to your attention, but you want to replace some elements, then experienced craftsmen will fulfill all your wishes. For example, you can replace the number symbolizing the age of the birthday person with any other. And if you plan to purchase a composition for graduation, then the number can be replaced with a thematic inscription. Balloon figures can be complemented with any number of real teddy bears, which will further enhance the effect of the design.
Good afternoon Today we have one more figurine ... for those .. who likes to please children))) by the way, gifts from balloons are loved by both children and adults!)) We will make a bear or another dog ... who, as fantasy allows)))
For work we need:
- 6 balloons 12 inch blue ... or 5 balloons and one lincolun (more on that later)
- 3 balls 5 inch white
- one five-inch black ball for spout
- 4 blue 5 inch balloons
- 2 shdm 260 (shdm-balls for modeling ... in the common people sausage balls))) for pens
- one small ball for a weight of any color
- permanent markers
beads ... (in my case, vitamins revit .... in my opinion this is an ideal option ... even if the child bites through the figurine ... which happened in my practice ... a bead-vitamin ... will not harm him)
- cutting shdm
- a pair of hands and a great mood .. as usual)))
Let's start) inflate a cluster of 4 x 12 inch blue balloons (a cluster is 4 inflated balloons of the same diameter tied together) in order to make the balloons the same there are several ways ... but since for this figure we need some calibrated balloons .. .we will count the pump strokes by inflating each balloon ... so we inflate each of the balloons by 20 pump strokes ..
Now we make the body .... there are such balls ... they are called lincolons ... these are balls with two tails like in my photo ... but if there is no such ball ... it's okay ... let's make a button on a simple ball ..to which we will then attach the head ... for this we will inflate the ball to the desired size ... and without tying it we will put a mark on the top with a marker .... we will blow off the ball ... we will lower the bead inside it ... we will roll the bead to our mark and tie a piece of shdm-ki for a couple of turns ... and tie a knot .... we attach the body to our base ...
The next step... we inflate a cluster of small balls and tie them to our body... make sure that all the balls in the cluster are the same... otherwise the figure will be crooked and sloppy...
We will inflate the balloon into two or three strokes of the pump ... we will tie ... then with both hands we will press the walls of the balloon to each other ... with one hand we will push the knot inside ... and with the other hand we will try to grab it from the other side .... as soon as we they grabbed him ... let's scroll him three times around us and tie him ..
we will fix it with a shdm cut ... so we will make two ears ... at first it is difficult for one person to cope with this ... ask for help ... at least in tying the knot while you hold it ... so we make two ears ... for the muzzle, we need the ties to be on both sides ... one to tie the muzzle to the head ... the other ... to tie the nose to the muzzle ... the technique is the same ... but when we inflate and tie the ball ... we will tie a piece of shdm to the tie ... in order to push the knot inside the ball ... there is a string left outside ... unfortunately I forgot to take a photo .... if something is not clear, write ... I will explain ...
These are the blanks we got ... to one of them ... which has two strings ... we tie the nose ...
We collect all the blanks ... we inflate a blue blank with three buttons ... and tie the ears and muzzle in place ...
tie our head in place) there is very little left))
