Author's knitted shoes ankle boots knitting pattern. Crochet slippers

Even world-famous designers do not dare to challenge the popularity of knitted shoes. Every year it becomes even more interesting, more original. And this is no accident, because even our grandmothers used to knit, in addition to socks, slippers. Some new materials are constantly appearing, opportunities for creating it, so it’s really not a shame to appear in public in it. The sole for knitted shoes has also become quite diverse today. It is not difficult to create such a product with your own hands, because the range of high-quality yarn is also quite large. ABOUT different options we will tell you in this article.

Features of knitted shoes

Shoes and clothes self made occupy a fairly solid position in the modern world of fashion. Today, both home shoes and street shoes can be knitted. Naturally, it is difficult to surprise someone with children's knitted sandals, but it is not often possible to meet a girl in such homemade sandals on the street. This is due to a certain uncertainty about how convenient and reliable such things are.

Important! Much here depends on the quality of the threads used, the density of knitting, the method of attaching the knitted top to the sole. With all confidence, only one thing can be said: such shoes look incredibly impressive, original, not a single fashionista will be left without attention.

Now you will see that everything will be very simple to do:

• It is best to use a ready-made sole, for example, from old sandals.
• The easiest way is to fasten the threads to the place where it was sewn and start knitting from the base.
• Holes are made easily with a regular sewing awl.

Knitted loafers do it yourself

Even if you do not have such experience in needlework, with maximum effort, you can achieve a wonderful result. It is better to start with something simpler - it can be light knit shoes with soles. Crochet with your own hands, you can make, for example, moccasins.

Work materials

Prepare for work:

• yarn;
• metal hook;
• unnecessary shoes to use their soles.

Manufacturing master class

You will need to perform the following manipulations:

1. Cut matter off old shoes, pierce the edge of the strapping sole in a circle as close to the top edge as possible.
2. Take the main thread, tie the edge of the sole. Just thread the hook from the outside to the inside of the hole, grab the thread, pull it out so that you have a loop.
3. Next, pull another loop from the adjacent hole, knit them together. Repeat this action in a circle, fasten the thread and cut.
4. Take moccasin yarn, tie the sole in a circle under the formed arches in rows to a height of 2 cm with a lifting loop.
5. Cut the threads and hide.

1. Measure the length of the sole, put markers at half the length on both sides.
2. Also mark the middle of the front of the product.
3. Measure the widest part of the foot along the sole, take half, measure in the middle of the marker on both sides. You will get a toe. This is approximately 9 loops or 4.5 cm.
4. Knit further in the back halves of the loops, at the end rise to the next row. To do this, knit 2 connecting posts in the next two loops and turn the moccasins with the heel towards you, knit the second row in the opposite direction.
5. Again, in the next two loops of the side, knit 2 columns, finish all rows with them.
6. Start adding from the third row in the front rows to expand the toe, knit 2 columns in each first and last loop. Before the markers, knit the toe in this way.
7. Let's get to the language. Without increments, knit 2 cm, this is about 4 rows. Start cutting as follows: on both sides, cut three times the loop through the row, that is, only the loops in the front rows. You will get a tongue about 7 cm wide, then knit another 7 rows without changes, close the loops, remove the threads. Tie the finished tongue with single crochets.
8. We start knitting the back. Measure 3 cm from where the toe meets the side of the moccasin towards the toe. Knit for the front halves of the loops right along the tongue, then the heel already for both halves of the loops in a circle, that is, around the heel, turn and knit another row in the opposite direction from one marker to another.
9. Reduce one loop, make a single crochet, knit 2 air loops over the next two columns, you will get a hole for the lace. Approximately 4 stitches before the end of the row, chain 2 stitches, then another stitch through 2 single crochets, but do not knit the last one to make a reduction.
10. Knit all loops in the opposite direction with ordinary columns. You will have two pairs of rows, with and without a hole. Alternate pairs so that you get 3 holes on each side.
11. Knit a chain 90 cm long from air loops for lace, add Italian lurex.

Your chic moccasins are ready!

Original knitted boots

It is even easier to make knitted boots with your own hands, something like boots that are firmly in fashion. Any girl dreams of such beautiful and light shoes. The tutorial below will help you create it yourself.

Work materials

You will need for work:

• Soles from old boots.
• Felt insole.
• Genuine leather and high-quality leather substitute.
• Cotton fabric.
• Awl.
• Knitting hook.
• Threads of two colors, preferably hard and strong, so that they keep their shape well.

Sole binding and insole preparation:

1. Glue the felt insole cotton fabric on one side and skin on the other side.
2. Remove the fabric upper from the boots, but leave the threads where the heel and toe are attached.
3. Pierce the sole with an awl from the edge at a distance of 2 mm and from each other 4 mm, tie the resulting holes with a row of single crochets.

Making the bottom of the boots:

1. Attach the thread in the center of the sock, knit 2 rows with single crochets.
2. Knit the third row like this: lifting loop, 3 single crochet.
3. Expand knitting, starting from the second loop from the hook, knit 6 single crochets.
4. Check that the posts are clearly in the center of the sock.
5. Then knit 2 more columns on the sole.
6. Turn around again, starting from the second loop, knit to the end of the row, knit 2 loops on the sole, turn knitting again.
7. So continue to work until the sock is completely fabric.
8. Try on a boot on your foot, maybe it's time to stop. You will have approximately 22 rows.

Knitting of the toe:

1. Since you did an increase before, then starting from the next row, knit two rows without increases.
2. The next row again with one increase, then two without an increase, and so alternating another 10 rows.

Important! It is better to record the entire course of work so that the second boot comes out exactly the same.

We knit the heel:

1. Go down to the sole again, you will knit the heel with single crochets, skipping corner loops, then knitting to the connection of the toe and sole, skipping the corner loop again.
2. Expand the work, start knitting again from the second loop, tie the heel with ordinary columns to the angle between the toe and heel.
3. A connecting loop will come out on your hook, start knitting further from the second loop of the row.
4. Continue to the corner again, repeat the previous paragraph.
5. Once the heel reaches the desired height, knit 4 single crochets in a circle. It is important that the boot fits snugly around the foot, so in some places it may be necessary to reduce the loops.

Important! Tie original flowers for decor so that your boots sparkle with new colors.

footage

Yes, you will have to work a lot, make an effort, spend your time, show utmost attention and accuracy, but on the other hand, your knitted shoes with crocheted soles will impress everyone around you.

KNITTED SANDALS "SUMMER"

For size 36-39

Required:

1. Yarn PNK named after Kirov "Lotus". Composition: 100% cotton. Thread thickness: 250 m x 100 g Colour: 0103 Consumption: 60 g
2. Hook number 1.5
3. Knitting markers
4. Scissors

Knitting patterns. Conventions

VP - air loop

Connecting p. - connecting loop

RLS - single crochet

CCH - double crochet

CC3H - a column with three crochets

Description of work

1. Sole binding
2. Knitting shoe upper
3. Assembly: attaching the upper to the sole
4. Sole binding

1. Prepare the finished sole for strapping: make holes along the edge of the perimeter to a depth of no more than 0.3 - 0.5 cm from the edge and at a distance of 0.8 -1.0 cm from each other.

Sew the holes with a needle or crochet through the “overlock” stitch with main yarn, starting from a point on the side equal to approx. 5-6 cm from the edge of the heel.

then 5 more rows of sc from the starting point of knitting to the same level on the opposite side.

At the same time, in each next row, shift the row by 3 sts towards the toe, knitting the first and ending the last sts in the row in descending order of height * RLS + 2 connecting sts *

In finished form, the height of the edge binding above the toe will be no more than 0.5 - 0.8 cm.

Mark the center of the toe with a marker.

2. Knitting top

With the main yarn, cast on a chain of 14 VP + 2 VP lifting and knit RLS, while at the BEGINNING of EACH row, after 2 lifting loops, perform 2 RLS with one center. Do not add at the end of the row. Thus, in each row, 1 sc is added.

After 30 rows, the workpiece will have a shape according to scheme number 1

Knit as follows:

1 row of straps: 4 ch lifts, perform a "Fan" of * 2 columns with three crochets (SS3N) with one center in the first extreme loop *, 1 SS3N in the next loop, 5 VP, RLS in the next loop, 2 VP, RLS in 3rd loop in the course of knitting, then the whole row * 5 VP (= chain), RLS in the 6th p., 2 VP, RLS in the 3rd p. *, finish row 4 SS3N in the last loop

2nd row of planks: 3 lifting VPs, RLS in the 3rd loop (i.e., in the “Fan” loop) of the previous row), then the entire row * 6 RLS under the “big” arch of 5 VPs, RLS under the arch of 2 ch *, finish row 3 ch, sc in the last p.

3rd row of planks: 2 lifting VPs, RLS in an arch of 3 VPs, then the entire row continuously * 7 RLS under each arch of VP *, finish row 5 RLS under the outermost arch of VP

4th row of straps: tie with a “crustacean step”.

Leave a long tail for later sewing.

Knit the second part of the top in the same way.

Dimensions of the top part in finished form:

height - approx. 13 cm

top edge width approx. 20 cm

The openwork bar is designed for a low instep of the foot!

Focus on your parameters and, if necessary, increase the number of loops when knitting arches from the VP and the RLS knitted in them to increase the width of the bar!

From the marker of the center of the toe in opposite directions, count 2.5 cm.

Baste the finished top to the binding of the sole and sew with a needle with a “machine” seam or with a vertical knitted seam with a thread of the main yarn. At the same time, along the upper edge, the side parts of the strap (i.e., “Fan”) are “stretched” and “stretched” sewn along the length of the extreme loops of the “Fan” itself.

On the heel knitted part of the sole, tie 1 next to the “crustacean step” or with a needle with a seam “over the edge”.

(crocheted). You can work with the description and diagram of each of them, modifying it to suit your taste and needs. Then you get something unique. And if you pick up elegant yarn, you get really beautiful knitted shoes.

Ballet flats for dancing

Here is a knitted shoe (crocheted) with a description and diagram for the top of the ballet flats and for the sole (see the picture below). Experienced craftswomen recommend knitting the bottom of ballet shoes with a two-fold thread. If you want a tighter knit, but without folding the threads, then you can replace the double crochets with single crochets. In this case, the number of rows should be increased.

In order to knit the top of the product, it is necessary to continue knitting in a circle with the same elements. So knit three rows. Then start decreasing the loops for the toe.

To do this, in the first row, you need to connect two with one common vertex. If single crochets are selected, then they are supposed to be simply skipped. Decrease should be 4 loops on both sides of the toe.

The next two circles are recommended to be knitted with a decrease of 3 loops on both sides. If the work was done with yarn in two additions, then in the next row you need to cut off one of the threads and replace the element with a smaller one. That is, if there was a double crochet, then knit it without a crochet. The ballet flat, which was originally knitted with single crochets, must be continued without changes, but in one thread. At the same time, make one decrease on the sides of the socks.

Run one or two more rows without changing the number of loops. Then knit a row with pico. That is, alternate columns with chains of three air loops.

Festive boots

Why do crocheted shoes (with a description and a diagram) have to look like slippers? You can make high or low boots and show off in them on holidays. It should be noted that their sole will also be tied, so it is better to wear such boots already indoors. By the way, some pull them directly on shoes or sandals. And the heel is pushed into the hole left in advance.

Since the pattern of the proposed model is simple, you need to choose a beautiful yarn for knitting. The melange thread with lurex looks original and festive. It should be thin, and you will need a hook number 1-1.75.

Product manufacturing algorithm:

1. Knitting begins with a sock. On the slip loop ring, double crochet 20. This is the first row.
2. All subsequent circles create a pattern for the top of the sock. To do this, 9 columns are left on the sole and knit without change. Between the two extreme columns on both sides, you will need to add one column at a time. Between these additions, a fillet net is knitted, that is, after each double crochet, you need to make an air loop.
3. The second point is supposed to be done two more times. That is, the addition must be made in three circles.
4. Then knit without changing the pattern to the place where the heel will be. Leave a hole by picking up a chain of air loops. Moreover, it should be longer than the loops left untied.
5. Then continue to knit the sirloin mesh around the circle. Finish knitting at the desired height.

In order for the boot to fit snugly around the ankle, it is recommended to knit this part with columns of different heights: with two or three crochets. Fasten the top of the boot with an elastic band of a suitable color.

Sandals

They do not require a lot of yarn, but you need to stock up on the sole for the espadrille. You will need to tie the toe and heel. Moreover, you can choose any pattern: from a completely closed toe to narrow stripes. To make knitted shoes comfortable to wear, the master class prescribes taking cotton yarn.

The details of the toe must be knitted so that they fit snugly around the leg. It is recommended to even stretch them slightly. Then sew them with overcasting stitch to the prepared sole. The heel with tie stripes should also be tight-fitting. To keep the sandals securely on the foot, you can tie a small circle into the upper part of the toe and thread the strip from the heel into it.

Simple slippers from grandmother's squares

They can look pretty too. To do this, select beautiful pattern and knit it with suitable yarn. For each slipper, you will need to make 6 identical squares that need to be sewn correctly. To begin with, add 4 of them to each other so that you get a large square. This is the basis of what will later be called "knitted shoes (crocheted)".

A description and diagram of what to do next can be found in Figure A. Sew two more squares with the outer sides diagonally to those that are already on great detail. Then bend those to which the second squares are not sewn, and sew those sides that are in contact with the upper ones. Slippers are ready.

Master class from Temina's mother from Osinka

For size 37-38 I took the thread "Adelia"

And knitting needles number 2.5. Gained 15 loops (13 + 2 chrome.)

Now we begin to knit a toe, for this we knit as follows: chrome., 6 pet. garter stitch, nakid, 1 person., nakid, 6 pet. knitted, chrome

We make additions on both sides of the crochets, knit the crochets from the inside with a cross. pet. That's how it turns out

We knit until there are 49 loops on the needles, then we divide into 3 parts: 20 loops-9-20 loops.

And we start knitting the toe, we knit the toe like a heel on the middle 9 loops, capturing the side ones. We knit until the loops on the side knitting needles run out. It should go something like this

Now we begin to knit the side parts of our track together with the sole, for this we collect 16 loops on the sides, we dial after 1 loop, I immediately knit them

And then we knit straight, in my case 40 rows to the heel, not forgetting the first and last 7 loops to knit with a garter stitch. It should turn out like this

Now we knit the heel, do not forget to knit the last few rows in garter stitch.


That's all, design to your taste. I will be glad if my master class helps someone. Good luck!!!