(I knitted them for 4 days 🙂)

Materials and tools:

• 100 g of LIRA yarn (60% cotton, 40% acrylic, 50g / 150m) - one 50-gram skein per 1 golf,
• circular knitting needles number 3,
• set of stocking knitting needles No. 2.

Size 37-38

Knitting density: 20 p. x 31 p. = 10 x 10 cm

We will knit stockings from top to bottom.

We start knitting with thicker knitting needles (circular No. 3). We collect 64 loops and knit in a circle of 4 cm with an elastic band 2 x 2 (alternate 2 faces. p., 2 out. p.).

Then we go to the main:

It will turn out like this:

After about 30 cm from the initial row, I transferred the knitting to 4 stocking knitting needles No. 2 - 16 sts each (and knitted the 5th working needle). Now our golfiki will become a little narrower in the ankle area.

Having connected 14 rows in this way, we proceed to knitting heels.

Temporarily leave half the loops (32 loops from the 2nd and 3rd knitting needles) and continue knitting stockinette stitch and on the loops of the 1st and 4th knitting needles (personal rows - persons.p., out.rows - out.p.). Knit in stockinette stitch for 20 rows.

In the next row we start turn off heel loops. To do this, we divide the loops into 3 parts (32 \u003d 11 + 10 + 11): the side parts of 11 loops, the central part of 10 loops. We knit the loops of the central part, and gradually reduce the loops of the side parts. We finish each row by knitting together the last loop of the central part (10th) and the first loop of the side (on the front side - 2 faces together, on the wrong side - 2 together out.).

When 10 loops remain on the needle, we finish knitting the heel. It will look like this:

and on the other hand like this:

On the knitting needle, on which we have 10 loops of the central part of the heel, we will collect 10 points from the edge loops (see photo):

Then we knit with an openwork pattern loops on the deferred 2nd and 3rd knitting needles. Then again we pull the loops from the hem loops along the second edge of the heel onto the knitting needle. We distribute the loops on 4 knitting needles.

We continue to knit on 4 knitting needles (on the postponed 2nd and 3rd - with an openwork pattern, on the 1st and 4th - with the front surface).

Having tied up to the little finger, we begin to make decreases in every second row. To do this, on the 2nd and 4th knitting needles at the beginning of the row we knit 2 loops together, and on the 1st and 3rd - at the end of the row we make broaches. When there are 5 stitches left on each needle, decrease on each row. And after a couple of rows we close and sew the remaining loops.

These are the openwork knee-highs I got with knitting needles:

PS: It turned out that they are slipping, you will have to sew elastic bands 🙂 .

Happy knitting.

How to tie openwork mitts crochet (master class)

How to knit mitts with knitting needles (master class)

How to knit mittens with knitting needles

summer mitts, crocheted

Currently, homemade warm accessories are gaining more and more popularity. Slippers, sneakers, socks and even knee-highs: you can knit all this with knitting needles at home, giving the product value and quality.

warm friends

As soon as the cold starts, people immediately begin to prepare for the winter, making edible preparations, various household chores, making knitted socks and slippers. They, as it turned out, are indispensable accessories for any winter, as they do a great job of keeping our feet warm. Therefore, such a detail is always at home, even with a spare set for guests.

Knitted variety

Everyone chooses a product for themselves, relying on personal preferences. So, if slippers are a long-worn and boring detail, then knee-highs with knitting needles look very interesting and unusual, compared to other household attributes. Moreover, they can be made at home with your own hands, using improvised materials.

Of all the lace and motley variety, let's pay attention to jacquard knee-highs with knitting needles, the schemes of which will be discussed in detail below. This style of knitting is perfect for the winter season. In addition, thanks to this choice, we will be able to decorate our golfs with any patterns that can only be depicted in the diagram.

All you need

It's time to decide on the materials that we will use in the future. If you are a fairly experienced craftswoman practicing knitting, you should already have all the necessary kit. But do not worry if it is missing, since you can use all the purchased equipment in all the following projects.

• A set of stocking knitting needles. In our case, only 4 will be needed, by combining which we will get the perfect girth for the product. The thickness is chosen based on the thickness of the thread.
• Yarn. It is best to choose a thread with a small amount of wool so that the product is not too prickly for the leg. In addition, such a thread is quickly wiped. The perfect combination of synthetic and natural fibers will allow you to achieve high wear and comfort knee-highs. Do not forget that you need to use several colors so that the knitted pattern is noticeable.
• In order to make knee-highs with knitting needles, pattern patterns will also be needed. So, in order.

Knitting knee socks: diagrams and descriptions for beginners

Let's consider this question in detail. Now everything is ready to knit the stockings with knitting needles, the diagrams and descriptions of which you can find below. To facilitate the process of perception, we will describe everything important points step by step. Making knitting accessible even for real beginners in this business. So:

1. Before you start knitting knee-highs with knitting needles, the diagrams and description must be carefully considered in order to understand all the features. Our pattern is nothing complicated, as it is simply a combination of threads of two colors, which alternate according to the pattern. Now you can get to work.
2. We collect sixty-eight loops on four knitting needles so that each of them has an equal number. Now we knit an elastic band, consisting of 2 facial and 2 purl loops, alternating with each other. In this way, we knit about fifty rows to create a dense base.
3. Now we knit ten rows with just the front stitch, preparing a place for it. According to the scheme, we knit each loop, carefully watching the colors of the thread. A careful attitude will help to avoid confusion in the work and further distortion of the picture.
4. After the main ornament is ready, you need to knit about ten rows with ordinary threads with front stitch, creating stockings with knitting needles. The diagrams and description below indicate that the decrease in loops begins. We knit the next row of each of them together with the next one. Getting double loops, decreasing in number.
5. Again we knit a familiar elastic band, as at the top of a golf course. In parallel, we remove the loops from each knitting needle, alternating either one decrease on the first knitting needle, then two decreases on the second, and so on, until we do this on four knitting needles. After that, we continue to knit the elastic band for another ten rows.

Without a heel - nowhere

And finally. It's time to knit the golf heel with knitting needles, the diagrams and description of which are almost completed. We distribute the loops on the knitting needles, leaving 10 units on the first, and 8 loops on the even ones. All remaining loops are moved to the third knitting needle.

We knit all the loops on the first knitting needle, and we complete the last part with the first loop of the second knitting needle. Having typed ten more loops, it is necessary to knit 3-4 rows with facial loops. You can use the same color or a contrasting one taken for the pattern. Now we knit to the desired length so that the leg is comfortable.

We complete the product by knitting all the loops for another five rows, and then, subtracting two units on each of the knitting needles. Then we collect the remaining loops on the thread and tighten it into a tight knot, tucking the unnecessary fragments inside.

That's it, knee-highs are ready with knitting needles. Schemes and description can be put aside and admire the completed result. The products turned out to be soft, absolutely not prickly and so pleasant to the body that you are unlikely to want to take them off throughout the winter.

Dimensions

36/37 (38/39)

You will need

Yarn (75% wool, 25% polyamide; 400 m / 100 g) - 200 g lilac; stocking knitting needles No. 2.5–3; rhinestones and rivets for decoration; glue for textiles.

Patterns and schemes

Rubber

Alternately 2 facial and 2 purl.

Front surface

When knitting in rows in the forward and reverse directions: front rows - front loops, purl rows - purl loops;
when knitting in circular rows: knit only facial loops.

Embossed motif "Star" on 19 loops

Knit according to the pattern. From the 1st to the 30th round. perform 1 time.

Knitting density

30 p. x 40 p. = 10 x 10 cm, knitted with the front stitch.

Completing of the work

Dial 80 loops on the knitting needles crossed, distribute the loops on 4 knitting needles and close in a ring
(= 20 sts on each needle). Knit 5 cm with an elastic band.

Knit the upper part of the golf in the front stitch in circular rows.

After 40 circles. from the gum on the last 9 sts of the 2nd knitting needle and the first 10 sts of the 3rd knitting needle, knit the 1st “Star” motif (= 30 circles), then continue the work again with the front stitch on all loops.

After 20 circles. knit the 2nd motive "Star" and after it perform 20 rounds. with front stitch, while in the 1st circle, evenly distributing, reduce 8 p., for this, knit 2 p. together with facial stitches on each knitting needle in the middle and at the end \u003d 72 p. Knit the 3rd motive, as described above, and perform another 20 rounds. facial stitch, while in the 1st circle. also subtract 8 p. = 64 p. 48 cm are connected from the elastic band = 190 circle.

Leave the loops of the 2nd and 3rd knitting needles temporarily, on 32 p. of the 1st and 4th knitting needles, perform a boomerang heel.

Finish with stockinette stitch on all loops of the foot to a length of 19 (20.5) cm.

Then perform the toe "corner".

Decorate the top two stars with rhinestones, attaching rhinestones at the ends of the rays and in the inner corners.

Glue the rivets under the elastic band and above the heel, as in the photo, or arbitrarily.

Knit the second golf in the same way.

Photo: Sabrina. Special Issue" No. 8/2015

Socks and stockings

Little children's feet should always be warm and cozy, so mothers and grandmothers knit these products for their babies in in large numbers. For socks, the remnants of yarn will always fit.

Craftswomen also knit elegant options for the summer, which, as a rule, are made of cotton yarn with a beautiful openwork pattern on knitting needles or crochet. Winter socks are best knitted from soft wool yarn such as merino or alpaca. Gaiters are a great option for winter. They are worn over boots or boots so that snow does not get into the child's shoes. Knitting them is easy and very fast on two knitting needles. To make the product without a seam, it is best to knit on 4 knitting needles. Gaiters are useful for children involved in gymnastics or dancing.

Patterns for any hosiery are selected in a variety of ways - from light openwork to complex jacquard weave. Simple embossed patterns from front and back loops look great. Soft crocheted slippers will be useful for children at home, in kindergarten or visiting. Such a thing will easily fit in a child's bag or backpack, and mothers will not worry that the baby's legs will freeze. Socks, slippers, leggings and stockings, just like any knitted items, should definitely be decorated, especially if they are made of plain yarn. Girls will love all kinds of bows and voluminous flowers, tassels, pompoms. But for boys it is quite possible to make embroidery from their favorite cars and planes, as well as from dinosaurs and other cartoon characters.

Classic socks (3-4 years)

The simplest socks for all occasions can be knitted simple pattern in stripes from yarn of different colors, and then decorate with embroidery or appliqué.

You will need

80 g of sectional dyed yarn (50% acrylic and 50% wool), set of 5 knitting needles No. 3.

Progress

Cast on 48 stitches on the needles, distribute them on 4 needles and knit with an elastic band 2 x 2.

After 7 cm from the beginning of knitting, go to the front surface. After 4 cm, start knitting the heel. To do this, on the loops of the 1st and 4th knitting needles, knit in straight and reverse rows of 4-5 cm - this is the height of the heel. Divide the loops into three parts - 7-9 - 7 - and knit the heel as follows: in the wrong side, knit the 9th and 10th loops together on the wrong side, turn the work, knit 8 loops, and knit the 9th and 10th loops together facial. Work in this way until the middle 9 loops remain on the needles. On each edge of the heel, raise the loops on the knitting needles, the number of loops will increase. Knit on all loops in circular rows. At the same time, at the beginning of the 1st and the end of the 4th knitting needle, knit the last 2 loops together until the previous number of loops is obtained on each knitting needle. Knit the foot of the sock to the end of the little finger. In this case, the transition from row to row is located along the bottom line of the foot. To form the toe of the sock, knit the last 3rd and 2nd loops of the 1st and 3rd knitting needles together with the front, knit the 2nd and 3rd loops of the 2nd and 4th knitting needles together with the front crossed. Decrease repeat until 1 stitch remains on the needles. After that, pull off the remaining loops with a working thread, cut the thread, fasten and hide inside the sock.

Knit the second sock in the same way.

For children's socks, sectional dyed yarn with short transitions is great, which randomly forms a pretty pattern.

Striped socks (ages 4-5)

Cheerful stripes on the socks will bring joy to the child and warm his legs in cold weather, and the craftswoman will have something to do with the remnants of multi-colored yarn.

You will need

The remains of multi-colored yarn are only 80 g (100% wool or acrylic), a set of 5 knitting needles No. 3.

Progress

Cast on 52 sts on needles and distribute evenly on 4 needles. Continue as follows: 6 rows of stockinette stitch, 1 openwork row = * knit 2 stitches together with knit, 1 yarn over *, repeat from * to * the entire circular row, then knit with stocking stitch for a toe height of 8 - 10 cm. At the same time, perform a pattern of stripes , choosing a random color alternation of 2-3 circular rows in each color.

Knit the heel in one color on the 1st and 4th knitting needles in straight and reverse rows (heel height) 5-6 cm. Divide the loops into three parts - 8 - 10 - 8 - and knit the heel as follows: knit 10- The th and 11th loops are purl together, turn the work, knit 10 loops, and knit the 10th and 11th loops together with the front. Knit in this way until the middle 10 loops remain on the needles. On each edge of the heel, raise the loops on the knitting needles, their number will increase. Work on all loops in circular rows. At the same time, at the beginning of the 1st and the end of the 4th knitting needle, knit the last 2 loops together until the previous number of loops remains on each knitting needle. Next, knit the sock foot to the end of the little finger, while the transition from row to row is located along the bottom line of the foot. To form the toe of the sock, knit the last 3rd and 2nd loops of the 1st and 3rd knitting needles together with the front, 2nd and 3rd loops of the 2nd and 4th knitting needles - together with the front crossed. Decrease repeat until 1 stitch remains on the needles. Pull the remaining loops with a working thread, cut it off, fasten it and hide it inside the sock.

Turn the upper edge of the sock inward along the openwork row and hem with hidden stitches.

Do the second sock in the same way.

Ribbed socks (ages 5-6)

The 2 x 2 ribbed pattern makes the socks more elastic. They fit perfectly on the leg. For such a model, smooth or fluffy plain yarn is well suited, and you can decorate them in any way.

You will need

50 - 80 g of yarn (100% wool or acrylic), set of 5 knitting needles No. 4.5.

Progress

Cast on 48 sts on the needles and distribute them evenly on 4 needles. Knit 8 - 10 cm the main part of the sock, then knit the heel on the 1st and 4th knitting needles in straight and reverse rows (heel height) 6-7 cm. Divide the loops into three parts - 8-8 - 8 - and knit the heel with the front or purl as follows: in the purl row, knit the 16th and 17th loops together with the purl, turn the work, remove the first loop, knit 6 front loops, knit the 8th and 9th loops together with the front. Turn the work, remove the first loop, knit 6 purl loops, purl the 8th and 9th loops together, turn the work. Knit in this way until the middle 8 loops remain on the needles.

Further, along each edge of the heel, raise the loops on the knitting needles, the number of loops will increase. Knit on all loops in circular rows with an elastic band 2 x 2. At the same time, at the beginning of the 1st and the end of the 4th knitting needles, knit the last 2 loops together until the same number of loops remains on each knitting needle. Knit a sock foot to the end of the little finger, while placing the transition from row to row along the bottom line of the foot. To form the toe of the sock, knit the last 3rd and 2nd loops of the 1st and 3rd knitting needles together with the front, 2nd and 3rd loops of the 2nd and 4th knitting needles - together with the front crossed. Decrease repeat until 1 st remains on each needle. Pull the remaining loops with a working thread, cut it off, fasten it and hide it inside the sock. Tie the second sock in the same way.

Ruffled socks (ages 5-6)

The frill on the socks will make them elegant and attractive, and the frill can be made with contrasting yarn.

You will need

80 g of yarn (50% acrylic and 50% cotton), knitting needles No. 4, ribbon 0.5 cm wide for decoration.

Before you start knitting socks, measure the child's leg and calculate the loops for the desired size. Remember that the number of cast on stitches must be a multiple of four.

Progress

For one sock, dial 96 loops and distribute them on 4 knitting needles. Knit 4 rows in garter stitch, then knit 8 rows in stockinette stitch and in the next front row - 2 loops together. On the obtained 48 loops, knit 6 rows in garter stitch, 1 openwork row (= * knit 2 loops together with knit, 1 yarn over *, repeat from * to * to the end of the row), knit 6 more rows in garter stitch.

In stockinette stitch, work a 6-7 cm heel on the 1st and 4th needles in straight and reverse rows (heel height). Divide the loops into three parts - 8-8 - 8 - and knit the heel as follows: in the purl row, knit the 16th and 17th loops together with the purl, turn the work, remove the first loop in the front row, knit 6 facial loops, 8- Knit the th and 9th loops together with the front. Turn the work, remove the first loop in the purl row, knit 6 purl loops, purl the 8th and 9th loops together, turn the work, etc. Proceed in this way until the middle 8 loops remain on the needles. Further, along each edge of the heel, raise the loops on the knitting needles, the number of loops will increase. Knit on all loops in circular rows with the front stitch.

At the same time, at the beginning of the 1st and the end of the 4th knitting needle, knit the last 2 loops together until the same number of loops is on each knitting needle. Knit a sock foot with an openwork pattern up to the end of the little finger, while the transition from row to row is located along the bottom line of the foot.

Openwork pattern.

Row 1 – * Knit 3, Knit 2 together, YO 1*, repeat from * to * until end of row.

2, 3rd circular rows - facial loops.

4th row -* K1, K2 together, K1, K2*, repeat from * to * until end of row.

To form a pattern in height, repeat the 1st - 4th rows

The toe is knitted in stockinette stitch. To form the toe of the sock, knit the last 3rd and 2nd loops of the 1st and 3rd knitting needles together with the front, 2nd and 3rd loops of the 2nd and 4th knitting needles - together with the front crossed. Decrease repeat until 1 stitch remains on each needle. Pull the remaining loops with a working thread, cut it off, fasten it and hide it inside the sock.

Tie the second sock in the same way.

Pass a satin ribbon through the holes of the openwork row and tie a bow on the side (Fig. 34).

Figure 34. Ruffled socks

Slipper socks (ages 5-6)

Very simple, but cozy and homely model, which is easily knitted on two knitting needles of thick woolen yarn. The number of loops cast on for such a model should be a multiple of three.

You will need

100 - 150 g of yarn (100% wool), knitting needles No. 5.

Progress

Cast on 39 sts on needles and knit 15–16 cm with 1 x 1 ribbing. Next, divide the sts into 3 equal parts and knit in garter st on the middle 13 sts, temporarily leaving the first and last sts on pins. After 34-36 rows from the beginning of knitting the middle part, decrease to form a sock, for which knit in each 2nd row 3 times 2 loops together with the front at the beginning of the row after the hem and at the end of the row before the hem. Without turning the work, cast on the left edge of the central part of the loop, knit the set aside 13 loops, turn the work, knit the existing loops, cast on the loops along the right edge of the central part and add the first set aside 13 loops. On the resulting loops, knit in straight and reverse rows in garter stitch for 10 rows. At the same time, in each 4th row, decrease the 1st loop on each side, knitting 2 loops together with the front one at the beginning of the row after the edge and at the end of the row before the edge.

For the sole, select the central 9 loops and knit on them in straight and reverse rows (as well as the heel) as follows: remove the first loop, knit 7 loops with the front ones, knit the 9th central part and the 1st loop from the side part - together with the front , turn the work, remove the 1st loop, knit 7 front loops, knit the 9th loop of the central part and the 1st loop of the side part together with the front one, turn the work, etc. Knit in this way until there is no left on the knitting needles 9 central loops. In each 2nd row on both sides, decrease 3 times 1 loop, knit the remaining 3 loops together, cut the thread, leaving a length of 20 cm for the back seam. Sew the seam of the sock. Unscrew the elastic band halfway to the front side.

Knit the second sock in the same way. If desired central part slippers can be decorated with embroidery or appliqué.

It is not necessary to knit the central part of the slippers in garter stitch. For this, a small pearl pattern, front surface, a pattern of braids or a small checkerboard pattern 2 x 2 (Fig. 35) are perfect.

Figure 35. Socks-slippers

Slippers (age 6 years old)

You can quickly and easily knit cute slippers for a girl or a boy on two knitting needles from the remnants of yarn. The main thing is that they are bright and elegant.

You will need

About 80 g of yarn (100% wool or acrylic), knitting needles No. 5, leftover yarn for decoration, buttons.

Progress

Knitting is done from the sole. For one slipper, cast on 64 stitches and knit 10 rows in garter stitch. Continue with the front surface, to form the rise of the slipper, perform decreases, while noting the middle 2 loops. To decrease in each 2nd row, knit 2 loops together with the front before 2 middle loops and after 2 middle loops 2 loops together with the front crossed. At the same time, perform 3 decreases on both sides in each 4th row, 1 loop. After 10 cm from the initial row, continue the work without decreasing in garter stitch and knit 8 rows. Close all loops in one row. Cut the thread, leaving a length of 20 cm for the seam. Run a seam slipper.

For sports, children often do not need socks and golfs, but leggings. They are easy to knit on two knitting needles with any embossed pattern.

Knit the second slipper in the same way. Decorate the rise of slippers with knitted flowers, bows or buttons (Fig. 36).

Figure 36. Slippers

Floral knee socks (ages 4-5)

Knee-highs, knitted on knitting needles with a simple relief pattern, are decorated with cute flowers that can be knitted from leftover yarn or made from fabric.

You will need

100 g of yarn (100% acrylic or cotton), set of knitting needles No. 3, hook No. 3, leftover yarn for decoration, narrow elastic band.

Progress

Cast on 44 sts on needles and knit 2-3 cm with 1 x 1 ribbing. Knit an openwork row (= * knit 2 sts together with knit, 1 yarn over *, repeat from * to * to the end of the row), and then add 1 to each knitting needle loop and on 48 loops knit the main part of the golf with a relief pattern according to the description.

Relief pattern.

1, 2nd rows - * 4 front loops, 1 purl loop, 3 front loops *, repeat from * to * 6 times.

3rd, 4th rows – * purl 1, knit 7 *, repeat from * to * 6 times.

5, 6th rows - * 2 purl loops, 5 facial loops, 1 purl loop *, repeat from * to * 6 times.

7, 8th rows - * 3 purl loops, 3 front loops, 2 purl loops *, repeat from * to * 6 times.

9, 10th rows - * 4 purl loops, 1 facial loop, 3 purl loops *, repeat from * to * 6 times.

11, 12th rows - * 1 facial loop, purl 7 loops *, repeat from * to * 6 times.

13, 14th rows - * 2 front loops, 5 purl loops, 1 front loop *, repeat from * to * 6 times.

15, 16th rows - * 3 front loops, 3 purl loops, 2 front loops *, repeat from * to * 6 times.

To form a pattern in height, repeat the 1st - 16th rows.

Tie the main part of the golf course 15–18 cm long, depending on the height of the child. Knit 5-6 cm in heel height in stockinette stitch on the 1st and 4th needles in straight and reverse rows. Divide the loops into three parts - 8-8 - 8 - and knit the heel with front stitch as follows: in the wrong side, knit the 16th and 17th loops together wrong side, turn the work, remove the first loop in the front row, knit 6 front loops, Knit the 8th and 9th loops together with the front. Turn the work, remove the first loop in the purl row, knit 6 purl loops, purl the 8th and 9th loops together, turn the work, etc. In this way, work until the middle 8 loops remain on the needles. On each edge of the heel, raise the loops on the knitting needles, their number will increase.

Next, knit on all loops in circular rows with the front stitch. At the same time, at the beginning of the 1st and the end of the 4th knitting needle, knit the last 2 loops together until the previous number of loops remains on each knitting needle. Knit a golf foot to the end of the little finger, while the transition from row to row is located along the bottom line of the foot. To form a golf toe, knit the last 3rd and 2nd loops of the 1st and 3rd knitting needles together with the front, 2nd and 3rd loops of the 2nd and 4th knitting needles - together with the front crossed. Decrease repeat until 1 stitch remains on each needle. After that, pull off the remaining loops with a working thread, cut it off, fasten it and hide it inside the golf course.

Connect the second golf in the same way. Pass an elastic band through the holes in the openwork row and fasten its ends inside the golf course. An elastic band can be replaced with a cord twisted from yarn with pom-poms at the ends.

Knit the desired number of small flowers from finishing yarn and sew on the side of each golf, composing the composition on your own. If desired, add leaves to the composition (Fig. 37).

Figure 37. Golfs with flowers

Knee-highs with openwork hearts (ages 5-6)

Charming golfs for the girl are decorated with openwork hearts. Pass a narrow ribbon through the openings of the openwork, and the product will become especially elegant.

You will need

About 100 g of yarn (100% cotton), knitting needles No. 2.5.

Progress

Cast on 48 sts on needles and knit rib 1 x 1. After 2-3 cm, knit 1 openwork row (= * 2 sts together, 1 yarn over *, repeat from * to * until the end of the row). Then continue the work with the front surface, performing an openwork heart on the loops of each knitting needle according to the description.

1st row - 4 front loops, knit 2 loops together front, 1 yarn over, 5 front loops.

2nd and all even rows - 12 facial loops.

3rd row - 3 front loops, knit 2 loops together with the front one, 1 yarn over, 1 front loop, 1 yarn over, knit 2 loops together with the front crossed, 4 front loops.

5th row - 2 front loops, knit 2 loops together with the front one, 1 yarn over, 3 front loops, 1 yarn over, knit 2 loops together with the front crossed, 3 front loops.

7th row - 1 front loop, knit 2 loops together with the front one, 1 yarn over, 5 front loops, 1 yarn over, knit 2 loops together with the front crossed, 2 front loops.

9th row - knit 2 loops together with the front one, 1 yarn over, 2 front loops, knit 2 loops together with the front one, 1 yarn over, 3 front loops, 1 yarn over, knit 2 loops together with the front crossed, 1 front loop.

11th row – knit 2, yarn over 1, knit 3 together, knit 1, yarn over 1, knit 1, knit 1, knit 3 together, knit 1, knit 1, knit 3.

13, 15th rows - 12 facial loops.

Repeat rows 1 - 15 2-3 times, depending on the desired length of the stockings.

Knit heel height with stockinette stitch on the 1st and 4th needles in straight and reverse rows 5–6 cm. and purl 17 together, turn the work, remove the first loop in the front row, knit 6 front loops, knit the 8th and 9th loops together with the front. Turn the work, remove the first loop in the purl row, knit 6 purl loops, purl the 8th and 9th loops together, turn the work, etc. Knit in this way until the middle 8 loops remain on the needles. On each edge of the heel, raise the loops on the knitting needles, the number of loops will increase.

Next, knit on all loops in circular rows with the front stitch. At the same time, at the beginning of the 1st and the end of the 4th knitting needles, knit the last 2 loops together until the same number of loops remains on each knitting needle. Knit the foot with the front stitch or continue to knit openwork hearts on the top of the golf. Knit the foot to the end of the little finger, while the transition from row to row is located along the bottom line of the foot. To form a golf toe, knit the last 3rd and 2nd loops of the 1st and 3rd knitting needles together with the front, 2nd and 3rd loops of the 2nd and 4th knitting needles - together with the front crossed. Decrease repeat until 1 stitch remains on each needle. Then pull off the remaining loops with a working thread, cut it off, fasten it and hide it inside the golf course.

For knitting elegant golfs, you can choose any beautiful openwork patterns, one has only to correctly calculate the number of loops for circular knitting.

From the book Spearfishing Tutorial on breath holding by Bardi Marco

Openwork stockings for your daughter You will need: 150 g of cotton thread, knitting needles No. 1.5. Types of knitting: hollow elastic band, hosiery, openwork. Openwork knitting Dial the number of loops, a multiple of 9. 1st row: 2 out., 2 persons., n., 3 vm. persons. for the bottom, n., 2 persons. 2nd row and all even rows: 2 out., 2 persons., 3 out., 2 persons. 3rd

Knitting stockings according to the scheme with a description

Knitting stockings according to the scheme with a description

With the onset of the first cold weather, people begin to warm up urgently. Warm jackets are on the way knitted hats, scarves and, of course, stockings. After all, it is warm golf shoes that best protect women's legs from the cold. Especially if their owner put on a short skirt instead of practical jeans or warm trousers.
In this tutorial step by step master class knitting, we'll talk about how to knit a beautiful stylish model of women's golfs. She will appeal not only to experienced, but also to novice craftswomen who for the first time decide to try their hand at such a responsible business as knitting warm stockings.

Master class knitting warm golf

It is very cold outside in winter and late autumn. Therefore, all fashionistas have to warm up, while refusing their favorite shorts and short skirts. If in the cold season you do not want to give up the mini, you need stylish knitted stockings. They will not only perfectly warm in the cold, but will also complement your image, making it more stylish, original and bright!


Knitting such an unusual model of women's golfs is very simple. Such a task will be within the power of even novice craftswomen! In order to make beautiful elegant knitted stockings with your own hands, you will need:

• dense woolen or cotton yarn;
• knitting needles - 5 pcs.;
• scissors;
• hook;
• two circuits that will be demonstrated in this article.

Before you start creating women's golf according to the description, create a small sample to determine the density of knitting. For beginners, this will greatly facilitate the work. The following abbreviations will be used throughout the job description:

• p. - loop;
• persons. - front;
• out. - purl4;
• R. - row;
• chrome - edge.

We start the training master class with detailed description all actions. For knitting, a pattern called "Speck" is used. It consists only of individuals. R. To tie a beautiful product that fits snugly to the legs, you must first take measurements. It is necessary to measure the distance from the heel to the top of the lower leg, the length from the heel to the upper fold and the width of your lower leg. The number of loops depends on these measurements. But, it must necessarily be divided by 4, since we will knit knee socks on 4 knitting needles.
This step by step tutorial will cast on exactly 80 sts. This number of sts will need to be distributed over 4 working needles so that there are 20 sts on each. You cast on based on your measurements! We knit according to the first scheme. We work based on the size of the lower leg. Having reached the part in which the product narrows, that is, after knitting about 10 cm, we decrease the loops according to the scheme. Having formed the narrowing area to the end, we knit again using the scheme for beginners. Having knitted the product to the heel, put the 2nd and 3rd knitting needles aside. We continue with 1 and 4.
We carry out the required height for the heel. We combine all sts with 1 and 4 knitting needles. Perhaps it's not a secret for anyone that the heel in golf shoes is rubbed much faster than the rest of the product. Therefore, it must be compacted. To do this, you need to knit a heel according to the following pattern: chrome. we remove, we perform one person., we remove 1 p., we knit 1 and so on until the end of the row.
The next row, that is, the wrong side of the product, according to the description, is knitted out. p. At the same time, we do not remove the loops. According to this simple description for beginners, we knit the entire height of the heel. That is, about 4-7 cm.


At this stage of the master class, we need to divide all the loops between 3 knitting needles. If it is impossible to divide by 3, we transfer a little more loops to the middle knitting needle. We begin to knit stitches from the central part and 1 side. We knit the last loop together with 1 p. On the second side. We turn the product over and continue knitting using the same pattern.
Gradually, the shape of the knitted heel will become similar to a voluminous box. According to the description, we decrease the stitches until there are no loops left on the side knitting needles. After the heel is ready, we proceed to the formation of the sole.
On the side of the future women's golfs, we knit additional loops from the hem. When knitting the upper side stitches, we make reductions according to the second pattern. According to this scheme, it is necessary to tie a part of the product to the little finger. Next, the loops are closed: 2 pcs. in every row.
To seal the finger area, it must be tied using the facial method. We told beginner craftswomen about it in more detail at the beginning of this training master class. To prevent knitted knee-highs from slipping on top of the product while wearing, you can tighten the elastic with a hook.
Knitted stockings with knitting needles are ready! We hope that this simple master class helped novice craftswomen master the technique of knitting women's golf and now they will be able to please themselves and their loved ones with beautiful new clothes!

Video: Knit knee socks with patterns

Photo MK knitting golf

Comments

related posts:

Knitting a bactus with knitting needles according to the scheme with a description (video lesson)