Panel made of rope and twine. Jute filigree: a description of the technique and a step-by-step master class for making a picture

The Jute Filigree technique involves the creation of light and elegant crafts from twine or a thick cord. The techniques of filigree jewelry technique came to this art from the weaving of twisted wire.

Jute filigree involves the creation of light and elegant crafts from twine or thick thread

Working with natural thread is so pleasant that it immediately attracts young and beginner needlewomen. Simple tricks and a simple algorithm of actions allow you to quickly master this magnificent old technique.

Before starting the creative process, you need to stock up on simple and affordable materials:

• twine or any thick thread;
• transparent glue "Moment" or "Titanium";
• PVA glue for processing;
• scissors;
• tweezers;
• acrylic paints or acrylic varnish.

Stencils serve as the basis for filigree work. They can be drawn, relying on your own imagination or printed from the Internet. The sketch should be drawn with clear black lines on A4 white paper and placed in a transparent file.

The oilcloth will serve as the basis on which all the details will be glued. After processing and drying, the openwork craft is easily separated from the oilcloth base.

To make the simplest napkin from jute, it is necessary to draw two patterns: a circle with a diameter of 5-6 cm and the outlines of a future craft.

Work begins with the twisting of the "snail". A small loop is created and new circles are wrapped around it. A small amount of glue is squeezed onto the template, and the folded circle is placed on the file.

Important! To complete the work, the jute thread is always cut obliquely with scissors.

The tip is carefully glued and merges with the common workpiece.

The next step is the manufacture of an openwork base. Glue is applied along all the contours of the template and threads of the desired length are placed. It is convenient to work with narrow tweezers or fingers. To keep your hands clean, it is advisable to use wet wipes!

When all the threads along the outer and inner contours are glued, you can proceed to the manufacture of fastening "snails".

These small circles of thread folded in a circle will connect the openwork details of the napkin. The finished craft should be carefully smeared with a solution of PVA glue with water (1 to 1).

After the blanks have completely dried, they must be separated from the file and glued together.

If desired, the needlewoman can paint the napkin with acrylic paints. Gold or silver colors are ideal.

There are a lot of patterns for making openwork napkins and coasters. The main thing is to approach the creative process with soul and indefatigable imagination.

Gallery: jute filigree (25 photos)

Jute twine filigree: a master class and lessons from the masters of making an openwork vase

The art of jute filigree attracts not only young needlewomen, but also young guys with a creative streak. A master class on making an elegant twine dish is presented by a novice master from the Belgorod region Vladislav Trush.

For work, he uses a glass base vase and cling film, on which he will apply elegant openwork patterns.

The base dish is covered transparent film, in the center is abundantly smeared with glue, and the laying of the thread begins with a traditional snail. For convenience, the master holds the workpiece with sharp scissors and cuts off the oblique ends with them.

The next step is the formation of "droplets" around the central circle. The master cuts 10-12 threads of the same length from the ball and puts neat petals on the glue.

In the same way, internal droplets are laid out in a circle, and the pattern is more saturated and rich.

To fix the structure around the entire circumference of the workpiece, 3-4 rows of jute thread are planted on the glue.

The next stage of work is the formation of the second circle of petals. The master decided that they would have an inclined broken shape and consist of 3 decreasing droplets.

In the empty spaces between the curls, the young craftsman places small snails, which will have a fastening and decorative function.

The master carefully coats the finished work with PVA glue diluted in water. Allows it to dry completely, gently peels off cling film and excess glue, and then decorates with golden acrylic paint.

An elegant vase for strawberries is ready! A young novice master can make a great gift for March 8 for his mother or for his girlfriend with his own hands.

Jute filigree from threads, twine or ropes: step-by-step instructions for making a napkin holder

The art of jute filigree is based on laying natural threads in snails, drops and curls. They can be fixed to the surface with glue, then separated from it or remain in the form of decorative elements on the original basis.

New schemes for work are offered by an experienced needlewoman with experience. Based on its stencils, you can make an original openwork napkin holder.

The art of jute filigree is based on laying natural threads in snails, drops and curls.

In the work, craftswomen use glass pebbles, rhinestones and twine thread different colors.

To make a napkin holder in the form of a chestnut leaf, you will need hanks of gray-green and emerald shades, as well as brown pebbles for the legs and the central “nut”.

According to the prepared scheme, placed in a file, the needlewoman lays out the threads, generously lubricating the base with transparent glue.

The inner veins of the leaf are made with a gray-green thread, and the contours are beautifully decorated with bright emerald twine.

On a note! Jute of any color is available for sale, but the master can always change the shade of the thread to his liking. To do this, it is desirable to paint it before starting work, completely dipping it in high-quality acrylic paint.

All leaves of the back wall of the napkin holder are made in the same way, at the base they are fastened in circles on both sides of the workpiece.

The next step is to make the front wall of the napkin holder. The detail is made according to a small scheme with the placement of a central stone on a round base.

To connect the walls of the napkin holder, you need a reliable base. They serve as a wooden blank of 4 sticks, wrapped in jute thread.

2 openwork details and 4 small legs are securely attached to a dense base. It turns out a magnificent napkin holder for festive family feasts.

How to make a jewelry box using jute filigree? Photo of the beautiful work of an experienced master Sergey Shevchenko

Jute filigree is made up of simple patterns in the form of the letters "C" and "S", as well as filling in empty spaces with the help of snails and eights.

To make a rope box you will need: a base box, oilcloth, jute twine, glue and good creative mood.

The progress of painstaking jewelry work in the following stages of the creative process:

Prepared stencils are glued onto the base cardboard box, and all sides are covered with a protective film.

With the help of liquid glue, beautiful curls, circles and contour entanglements are fixed. When all the blanks are dry, they can be separated from the base and, if desired, painted with acrylic paint.

The bottom of the box is formed by laying the thread on the sides of the square. The twine is immediately placed on the glue, wrapped in one direction until the entire space from the corners to the center is filled.

For beauty and density, the bottom can be reinforced with circles and connecting rays.

In addition to the decor, the master decided to line the box with soft red velvet details, added pearls and white rhinestones. And as a fastening mechanism I used small door hinges.

The result exceeded all expectations! It turned out a magnificent box, which will be a chic birthday present for your beloved wife.

Making an original gift: a butterfly in the technique of jute filigree

In the eternal search for ideas for gifts, you can stop at making beautiful butterflies using jute filigree technique. For such a presentation, you need a minimum of material and 30-40 minutes of free time.

In the eternal search for ideas for gifts, you can stop at making beautiful butterflies using jute filigree technique.

1. To make the butterfly bright, it is advisable to use threads of different colors and add beads and glass pebbles as decoration.
2. On the finished template placed in the file, it is necessary to apply liquid transparent glue and carefully lay out the flexible twine threads.
3. Where the sketch lines are thick, you will have to glue 3-4 short strips of jute.
4. The color scheme of the butterfly is chosen according to the taste of the needlewoman.

The black dots in the diagram are decorated with small twisted snails; in addition, they can be decorated with pebbles or flat beads.

The body of the insect is formed by oval bases, on which large brown rhinestones are glued. After treatment with PVA glue and complete drying, the craft can be easily separated from the oilcloth base.

Bright butterflies can serve as an independent decorative ornament or placed on any fabric, wood or metal base.

Handmade crafts are always interesting and unusual. What kind of materials do not use needlewomen to sew, weave, knit their wonderful crafts. One of these materials is nondescript, at first glance, twine, which is made from natural jute fiber. DIY twine crafts can be made even by inexperienced craftsmen. This article will talk about several twine weaving workshops.

Crafts from jute rope and burlap become especially relevant when the country celebrates new year holidays- after all, they make a very cool symbol of the year, no matter if it's a pig and a pig, or a mouse, or someone else from the New Year's Oriental Zoo. It's good that everyone New Year- novelties.

Perhaps one of the most simple crafts jute fiber is broom-amulet. The master class for making it yourself is very simple and affordable. Necessary materials:

1. Leg-split.
2. Book.
3. Scissors.

Performance:

• twine must be wound on a book in 1 layer;
• carefully remove the wound fiber and tie it on one side, hiding the knot inside the future craft;
• they take the assembled end of the product and begin to wrap it tightly with a jute rope - this is the handle of the future broom;
• from the other end, the threads are cut, so that broom twigs are obtained;
• twigs are collected in small bundles and wrapped with a rope in a checkerboard pattern.

The finished broom-amulet is placed in the corner of the house with the handle down.

Twine rug: master class

Jute is a fairly durable material, so do-it-yourself rugs are often woven from it. Weaving can be done with a hook, a frame, or in another way known to needlewomen. Easiest to weave do-it-yourself rug with a hook:

Such rugs are often located at the front door or in the bathroom.

DIY twine basket: master class

From jute fiber can be made basket craft. She is not only beautiful, but also useful. To make a basket with your own hands you will need:

• hook;
• scissors;
• plastic bottle;
• glue gun or silicone glue;
• twine.

A master class on making crafts boils down to the following:

1. Cut off the top of the plastic bottle.
2. On the lower part, at the place of the cut, make notches along the entire edge at an equal distance from each other.
3. Start winding the jute rope vertically, passing it through each notch.
4. After that, cut the rope and fix the free end with glue.
5. Start winding the twine horizontally, moving from the bottom up, passing it in a checkerboard pattern with a hook through the vertical turns. Each new turn should fit snugly against the previous one.
6. When the walls of the basket are ready, you can start making the bottom. To do this, glue is applied to the twine braiding the bottom of the plastic bottle. A layer of twine is laid on top of the glue in the form of a dense spiral and left to dry completely.
7. To decorate the top of the basket, vertical threads are cut at the place of weaving and twisted in pairs, smeared with glue, and placed in the shape of a rose on the wall of the basket.
8. After the glue has dried, the plastic bottle can be removed.

The resulting basket is used as a box for storing small items. The size of the basket depends on the size of the plastic bottle.

Master class on making a bow from a jute rope

One of the easiest do-it-yourself twine crafts is a bow. The master class for its manufacture is simple and straightforward. Necessary materials:

Manufacturing process:

1. Wrap the twine around the jar in tight even turns, the more turns, the wider the craft will be.
2. Cut the twine and fix the free end with silicone glue, let it dry.
3. After the glue has dried, the wound rope is removed from the can and compressed in the middle so that the craft takes the shape of a bow.
4. The place of compression is wrapped with twine, the free end is fixed with glue.

These bows are used in different master classes to decorate the finished product.

Master class on making a vase from twine

There are jars or bottles in every house. If throwing out the hand does not rise, then they can be turned into excellent handmade vases. For this you will need:

• jar or bottle with a diameter of not more than 15 cm;
• glue gun;
• scissors;
• silicone glue.

A master class on making a vase with your own hands from twine looks like this:

1. The jar or bottle is covered with silicone glue.
2. Quickly, but gently, they begin to wind the twine horizontally from the bottom up.
3. The coils should fit snugly against each other.
4. The rope is cut and fixed with glue. After that, the craft should dry.
5. The finished craft with a glue gun can be decorated with various decorative elements: rhinestones, bows, flowers, etc.

Master class on making jute Christmas decorations

Apart from various crafts that delight the eye every day, twine can be made Christmas balls do it yourself. This will require:

• small balloon;
• leg-split;
• PVA glue;
• cloth or paper towel.

Manufacturing master class:

Master class on weaving a decorative turtle from twine

From twine, you can make decorative crafts with your own hands, like a turtle. The master class for its manufacture boils down to the following:

So, from jute you can make a lot of interesting and unusual crafts with your own hands. This article contains only a few master classes. Such crafts are not only beautiful, but also useful. They can serve as boxes, as well as revive old things or simple bottles, turning them into beautiful vases. Making them is very easy and simple, you just need to show a little patience and perseverance.

DIY flower twine basket. Step-by-step instruction with photo

This master class is intended for those who like to decorate the interior, work with twine, delight loved ones with gifts created by their own hands. Basket made according to this master class, will become wonderful decoration interior, as well original gift for the holiday Happy Easter for dyed eggs.
Target: obtaining skills in making baskets and flowers from jute twine.
Tasks:
- teach how to create crafts from twine;
- develop imagination, aesthetic taste, interest in the manufacture of products from twine;
- cultivate perseverance, accuracy in work.

She is comfortable and light
Her name is short
In the economy serves us for centuries,
There is in this word the name ZINA.
With it you can walk on mushrooms,
Can you pick berries?
It's not hard to wear
And very easy to break!
From rods, they weave their bast,
Tell me, what's her name?

For work we need:
- jute twine,
-glue "Moment-crystal",
-wire,
- plastic cup
-pliers,
-whiteness, or bleach ACE,
-scissors,
-file,
-pencil,
-paper,
-nail polish remover,
-awl,
- glue gun
-PVA glue

Today I bring to your attention MK for the manufacture of a flower twine basket
First you need to prepare the twine. Unfortunately, it usually has one light brown color, and for flowers we will need white as well. Therefore, we will bleach the twine. To do this, pour water into the container, add whiteness or ACE to it (about 150-200 ml per 1 liter of water) and lower 3-4 m of twine there (it should not be wound into a ball, because it will bleach unevenly)

Having achieved a light shade, we rinse the threads, you can lower them for a few minutes in fabric softener, then dry them. Here's what happened

To create a basket, you need to take a plastic cup

and trim the edges

The container should be degreased. I do this with nail polish remover. Then we wind the snail from the twine smeared with Moment-Crystal glue, fix it to the bottom of the cup with the same glue

and wrap the container to the brim

We do the same with the outside of the dishes.

Let's move on to creating a handle for the basket. To do this, you need to cross two wires

Next, in a cup wrapped with twine with a hot awl, we make two holes on each side, the handle of the product will be attached to them

We insert the handle wire into the holes on the inside of the cup, bite off the excess with pliers and fix it with a hot gun

We close the wire inside the basket with small pieces of twine planted on glue

We wrap the basket handle with twine starting from the base

Here's what happened

We decorate the handle with a thread of twine

Now we weave from twine threads long pigtail

and glue it on the edge of the basket

Let's get to the flowers. To create them, you need to twist five snails of the same color that are already familiar to us.

Next, you need to wrap them once with a thread of twine in a contrasting color. Here's what should happen

Now we drip Moment-Crystal glue on a transparent file for documents and apply our petals on it

So that the flower is not flat in the middle, we press with a simple pencil, the petals will rise

For the core, we wind the twine snail of the opposite color to the petals

After a few minutes, during which the glue dries, the flower can be removed from the file.
Let's move on to the leaves. We draw the desired sheet on paper, cover it with a file on top, circle the contour with Moment-Crystal glue and begin to lay it out with twine

When the sheet is completely lined with twine, remove it from the file and bend the edges, giving a realistic shape. Flowers and leaves ready

To create decorative curls, you need to wrap twine on a pencil and cover it with PVA glue

When the glue is dry, remove the twine from the pencil and cut into pieces 4-5cm

I decided to plant a butterfly on my flower basket. It is made on the same principle as the leaves. On a sheet of paper, draw the desired butterfly, or you can take a ready-made decorative one, as in my case, cover it with a file and trace the outline with glue, on which we then lay out the twine

With a glue gun we attach flowers, leaves, curls and a butterfly in random order, I decided to put the decoration on the handle of the basket. Our product is ready!

It is now common to make useful things with your own hands. Twine crafts look especially original and interesting. They don't require a lot of money to make. And the manufacturing process itself is available for most needlewomen who want to make something. with my own hands. You can decorate the house with twine items and use them for practical purposes.

Twine is made single-strand or multi-strand. To obtain a thread from bast fibers, jute, hemp, linen, paper are twisted, and their combination is also used. And for the production of synthetic twine, polypropylene, viscose and nylon threads are used. Synthetic rope has some advantages: it does not absorb moisture, it is light, the coating color is stable, and it is safe for human health.

Jute twine is very popular among needlewomen. It is made from a plant with the same name. Jute fiber has low elasticity, so the fabric from it turns out to be rough and tough. But nevertheless, it is used for the production of furniture fabrics, insulation, burlap, packaging material. And the most basic application is the manufacture of ropes, ropes and twine. Jute twine has unique property: Completely decomposes when disposed of without polluting the environment. It is used to create designer jewelry, designer products and unusual crafts. Jute goes well with other materials.

From jute you can make a lot of interesting and original crafts. Some require a minimum amount of material. Consider some available ways making crafts from twine with your own hands. The master classes are very simple.

Create an unusual bow

Very easy out of it make a bow. It can be used in the form of a brooch, as a hair ornament, to decorate objects with it. You will need: twine, silicone glue, scissors and any container with a diameter of not more than 15 cm. We wrap the twine tightly on the jar, monitor the tightness and accuracy of the turns. We wind until the desired width of the bow is reached. Then we cut the thread and cover the whole product with glue. Let it dry well, then remove the product from the jar and squeeze it in the center to make a bow. In the center we make several turns of the thread and fix it with glue from the back. Let the product dry and the bow is ready.

Making a broom-amulet

Another simple do-it-yourself jute craft. For making a broom you will need twine, a book and scissors. We wrap the twine in one layer on the book, then carefully remove it and tie it on one side, hiding the knot inside the product. We wrap the resulting end tightly with jute, making a broom handle. On the other hand, we cut the threads, getting broom twigs. We collect the twigs in small bundles, wrapping them in a checkerboard pattern with a jute rope. The amulet broom can be additionally decorated with small artificial flowers, hearts, a butterfly, a red ribbon bow and a coin.

Weaving a practical basket

An easy-to-make basket takes a little more time. But do-it-yourself twine baskets require very little material. We select a plastic container according to the size of the future basket, you will still need scissors, a crochet hook and jute twine. Let's start making a basket:

It turns out interesting crafts from a tourniquet, rope and twine. Let's take a closer look at the manufacture of a rope rug. A handmade one will cost less than a purchased one and will fit well into any interior. You only need to spend money on the rope. It can be purchased at any hardware store. For the rug, in addition to the rope, you will need silicone glue, a stationery sharp knife and a dense fabric as a backing.

We cut out a circle from a dense fabric and process the edge so that it does not crumble. We begin to wind the rope into a ring from the center, holding it with our hand. Having laid out to the desired diameter, we apply silicone glue on top and glue the substrate. It will not allow silicone to scratch the floor and fix the rope well. The rug is ready, it remains to find a place for it in your interior. And if you know how to crochet well, then you can easily knit a thinner rope rug.

Easy to make crafts from twine. With your own hands, you can make an original vase from a bottle. Even a novice master can make it. You will need twine, a bottle, silicone glue, scissors and a glue gun. The bottle must first be cleaned of labels and degreased with alcohol. Then we apply silicone glue and gradually wind the thread, tightly laying the turns. Cut the thread and leave the product to dry completely. finished vase can be decorated with flowers, leaves and curls of twine. Use beads, rhinestones and other decorative elements.

You can take for the base an old, out of fashion vase, which is a pity to throw out. Paste it with twine, decorate with decor, and it will become a bright accent in your interior.

Another easy way manufacture of rope products. You can make a lamp - a night light in the form of a pumpkin. It will decorate the room and add comfort. For a night light you will need: a tow rope, a balloon, scissors, PVA glue, paint and Christmas tree garland. Inflate the balloon and to give it stability, put it in a container. Pour PVA glue into another bowl and, wetting the rope in it, wind it around the ball. Leave a small hole at the top. Set aside and let the product dry well. Next, pierce the ball with a needle and pull it through the hole. Paint the workpiece with paint, preferably automotive, from a spray can. Insert the garland into the pumpkin and the night light is ready.

Using this technique and air balloons, you can make Christmas decorations different sizes. After complete drying, decorate the toys with beads, rhinestones and tie a thread in the form of a loop for hanging on a Christmas tree. You can make toys with your children.

jute filigree

It is used in the manufacture of luxurious patterned coasters, lampshades, jewelry boxes and other products. This technique requires certain knowledge and skills, perseverance and the flight of your imagination. The technique of jute filigree is to make curls and lay jute in the form of various patterns. To make filigree you will need:

Filigree technique

Work starts with thumbnail selection. To master the technique, it is advisable to choose a simple drawing. We make a clear sketch on paper or use a ready-made one. We put the sheet in a stationery transparent file. According to the drawing, we glue the contour and already glue a piece of twine to it, adjusting it with a knitting needle according to the drawing. It is necessary to press it with tweezers so that it sticks well to the film. Gradually fill in the entire field with a picture. To give a delicacy to the pattern, some elements are performed separately from the main one. Then they are assembled into the final drawing.

Basic elements of filigree

The basic elements used in filigree are:

Total basic elements about 15. But for beginners, this will be enough. Even if you learn how to perform them, you will be able to collect various openwork patterns. Elements can be repeated and alternated, creating a beautiful, unique pattern. When you complete the entire drawing, leave the workpiece to dry. And only after that carefully separate the craft from the file. You can decorate frames for photographs or paintings with jute filigree, make panels in an openwork style.

Crafts will create a special atmosphere in your home, add comfort and warmth.

Attention, only TODAY!

From improvised means you can make a lot interesting crafts, which will become a good gift or beautiful decoration dwellings. The main thing is desire and quite a bit of free time. A horseshoe has long been considered an object that brings good luck and fills the house with harmony. To make twine crafts for beginners, we need: 1-2 meters of twine; thick cardboard; glue; scissors; simple pencil; optional coffee beans and carnation flowers for decoration. Step by step instructions: 1. Draw the outline of a horseshoe with a pencil on cardboard....

How to make a candlestick with your own hands?

A candlestick is an interior decoration. Doing it yourself will not be difficult. We hope that given master you will like the class, and the photo and detailed description help in creativity. To work, you need to stock up on such materials: a glass, twine, double-sided tape, dry branches or berries for decoration. As a basis for a candlestick, you can take an ordinary tall glass. Of course, you can choose the form that you like the most. Twine is a special thread. It can be used in both construction and...

Tilda snail - master class for beginners + full-size pattern

The tilde snail is very different from many other toys, it stands out with its characteristic style. Most tildes are much more difficult to sew than a snail, due to which this particular toy is chosen for beginners and first sewing. We hope you enjoy this masterclass! Materials: Scissors Light-colored calico fabric Denim (clothing is also suitable) Lace Filler Acrylic paint Fine brush Elements for decoration: satin ribbon, flowers, buttons, etc. Tilda snail (production steps): Cut out the printed or ...

We make a mandala with our own hands

Here is a master class that will help you make a mandala for success and prosperity. It is believed that making a mandala with your own hands has a very beneficial effect on the state of mind, helps in the fight against depression. If something doesn’t work out for you, you have difficulties in life, or you go astray, then before starting to make a mandala, you should think about the problem and mentally ask the future mandala to help you with the solution. Materials: Threads (you choose the colors yourself) Caps Ruler Scissors Steps for making a mandala with your own hands: Before ...

Floating cup of coffee

A floating coffee cup is not only a cute decoration for the kitchen, but also great gift for the coffee lover. And today our dear guest: Tatyana will teach us how to make a cup from which coffee beans are poured onto a saucer. For work, you will need the following materials: - a saucer; - a cup (or a plastic bottle instead); - linen rope or paper rope; - scissors; - a piece of wire; - a tube with PVA-K glue; - a piece of thick cardboard; - coffee beans. A floating cup of coffee (production steps): Take a saucer and carefully...

DIY gift for a man

A gift for a man with his own hands is a great option for those who do not know what to give, especially if the man has everything. And today I want to show you interesting option gift: a ship made of twine and tubes for the decoration of which banknotes (bookmarks) are used. If desired, the gift can be supplemented with real money. Materials: Cocktail tubes Twine Double-sided tape Glue gun Cardboard Matchbox Caps Banknotes (bookmarks) Coins Braid or narrow satin ribbon DIY gift for a man (stages ...

Champagne cork craft

How often do we throw in the trash seemingly completely unnecessary gizmos. However, with a little imagination, many of them are able to find a second life. A vivid example of this is the craft made from champagne corks "Thieves". Materials: Champagne corks - 3 pcs. Pink threads Twine Glue Moment Crystal Beads - 2 pcs. and give them what they want...

Craft from coffee beans is great idea for all coffee lovers. It is nice to receive such a little thing as a gift or make it for yourself and then enjoy the coffee aroma from the product for a long time. It is unlikely that you will find such a souvenir in the store, but making it yourself is not difficult. Materials: Coffee beans Twine Glue Moment Crystal Cardboard Foam rubber or washcloth Scissors Paints Craft from Turtle coffee beans Let's start making crafts by drawing a template, it is more convenient to do this on a checkered piece of paper. We cut out the blank according to the template ...