home » Groups » How to make a paper fox. DIY paper fox for children

How to make a paper fox. DIY paper fox for children

Origami fox is one of the most popular paper origami. If you do not know how to make an origami fox, then on this page you will find everything you need to assemble this simple paper figurine.

In the first photo you can see what you get if you follow the assembly diagram below. The second photo of the origami fox was taken by one of our site users. He got about the same fox as in the first photo. It is unclear why he used scissors. If you have photos of the origami you have collected, send them to the address This email address is being protected from spambots. You must have JavaScript enabled to view.

Assembly diagram

Below is an assembly diagram of an origami fox from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then the assembly of the origami fox will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami fox quickly and without peeping into the diagram.

Videos master class

Assembling an origami fox for beginners can seem like a daunting task. Therefore, we advise you to enter the query "origami fox video" on the largest video hosting site on the Internet, YouTube. There you will find many different videos about the origami fox, which clearly shows the steps for assembling the fox. We hope that after watching the video of the assembly master class, you will have no more questions on how to make an origami fox.

This video tutorial will teach you how to assemble a simple origami fox:

If you would like to collect more complex model paper foxes, watch this video:

Symbolism

The fox in many cultures is a symbol of cunning, deceit and treachery. In Asia, the fox is considered a symbol of eroticism and feminine beauty. Some believe that the fox has a secret connection with the dark forces, and consider it a sharply negative symbol.

All children dream of magic, let's help them plunge into a fairy tale.
Interesting crafts for children it is possible make out of paper, today I will show you how Tomilova Yulia make a cute fox out of paper.
For work we need:
1. Cardboard (Julia used old folders from folders.)
2. Colored paper (single-sided and double-sided.)
3. Rubber glue and PVA.
4. Compasses, scissors, ruler, paints and brushes.

The chanterelle consists of four parts - the body, head, two legs. We make a pattern on cardboard and cut it out. We cut out the bartacks in the form of a zigzag, you also make the size yourself, thereby adjusting the volume of the part.

Glue together the body, head and paws. We should get four cones.

We glue the bottom to the head and paint all the details with orange paint or glue it with colored paper. We make an apron from colored paper and glue it on the body. We glue all the details on rubber glue, it does not deform the cardboard.

In the head where the edges were connected, we make a hole and attach it to the body with glue.
Now let's start making fur. We cut the paper into strips of 1.5-2.5 cm and cut it in the form of grass, as shown in the figure.
Now we draw scissors along the villi so that they are bent. We glue the structure from the bottom to the top. On the apron we do not glue the grass, we cut off the strip near it.

We do not paste over the muzzle with wool, we make ears.

If you want, you can cut off a piece of the muzzle and make a mouth.

Now you can make a hairstyle for our fox. Glue curls on the back of the head in pieces, we will also make bangs and a large blue bow. We color the eyes, make the nose out of foam rubber and paint it black. We make a tail and the fox is ready.

Here is such a fox turned out.

Hemp pattern: transfer to cardboard, cut out, glue, glue the bottom and paint.
From papier mache we make a kolobok, dry, paint and on a stump.

We decorate our clearing and you're done.

Don't forget to leave a comment on this article.

Origami paper fox- This is a simple classic figure in origami. Fox muzzle figurine, which can be done according to the diagram on this page, "can talk." Those. if you put the figurine on the fingers of the hand, then by moving the fingers, children can make the figurine open and close its mouth. Another model of "talking" origami - crow origami.

In general, there are a great many origami figurines of a fox. On this page, we have given some of the ways we know how to how to make paper fox figurine. First figurine classic origami diagram of a talking fox face. The second version of the origami schemehow to make a talking fox face out of paper is a little more complicated.

The third and fourth options are very simple five-step patterns for making a fox face figurine and even a fox in full height, which are suitable even for the smallest children, due to their simplicity.

How to fold a talking fox out of paper

For that to fold the origami fox as the initial figure, we need a sheet of square paper. As mentioned above, if fold a fox figurine from a large sheet of paper, for example, a square with a side of about twenty centimeters, you get a fairly large fox figurine into which children can insert their fingers so that the muzzle moves. From several of these figures, you can arrange puppet shows.

In step four of the origami diagram above, open and flatten the top pockets of the sheet.

At step number ten, open the origami figure from the bottom, while bending its upper part in the middle down almost to the base.

Another origami scheme talking fox

The figure below shows another fox origami scheme, i.e. the talking muzzle of a fox. The initial figure for this origami scheme is also a square sheet of paper, only assembled fox face figurine a little differently.

A simple origami fox for children

The figure below shows fox face origami scheme. This origami scheme is very simple with just five simple steps. And although the muzzle of the fox is not moving, i.e. the fox does not know how to "talk", as in the two previous diagrams, but the fox turns out to be very cute, and the diagram is so simple that it origami is suitable for even the smallest children.

Another simple origami scheme for children is a full-length fox.

The figure below shows another simple circuit, in just five steps, how can make a fox figurine out of paper, but now in full growth.

This full length fox figurine must be made from a square sheet of paper. Can be used colored paper. In this case, in the origami figure number one, the colored side of the paper should be located away from us. Fold a piece of paper like this. As shown in figure number two, and then push the top layers of paper apart and alternately fold the top corners to the bottom corner, as shown in figure number three.

The figure at number four shows that it is necessary to bend the future fox's paw from right to left. At the same time, it is necessary to bend the corner of the middle layer from top to bottom, which will be the muzzle of the fox.

Figure 5 shows the final version of the resulting paper fox figurines. It remains only to smooth out the fox figurine and, for attractiveness, draw her eyes and nose.

Origami came to us from Japan. This is a way to beautifully fold paper to make different objects. Get your kids and friends involved in this fun activity. We offer you to learn how an origami fox is made.

Scheme of assembly of the muzzle

Little kids will be very interested in learning how to make an origami fox. So that the lesson does not turn into flour, start with simple schemes.

Instructions on how to make a fox muzzle:

Take a two-color square sheet of paper: on one side it should be white, on the other - orange. If not, join the two sheets together.
Fold the paper diagonally with the white side inward (Illustration 1).
Fold the top together (Figure 2).
Bend both sides of the figure and turn it over (Illustrations 3 and 4).
Draw the elements of the muzzle with a marker or pen.

The muzzle is ready!

Assembling the whole origami fox

To get such an origami fox, you need to use not a square sheet of paper, but an ordinary rectangular one.

The assembly diagram looks like this:

Tuck the left corner of the sheet diagonally (Figure 1).
Unfold the sheet and fold the right side (Figure 2).
Fold the paper in half lengthwise (Figure 3).
Fold the paper as shown in illustration 4.
Make a fold in half on the bottom of the part (Figure 5).
Wrap the top corner (Figure 6).
Bend the bottom along the fold line (Figure 7).
Turn the part over (Figure 8).
Straighten the edges of the bottom part of the figure (Figure 9).
Spread the top and “tail” in different directions (Figure 10).
Make folds as in illustration 11.
Gently straighten the figure along the formed fold lines (Figure 12).

The origami fox is ready! If desired, you can draw a muzzle with a marker or pen.

The second version of the origami chanterelle

If you take a square sheet, then you can get another one:

Fold the sheet diagonally (Figure 1).
Unfold it and fold it diagonally again, only in the other direction (Figure 2).
Wrap the left and right sides of the resulting triangle (Figure 3).
Fold the resulting figure in half (Figure 4).
Wrap the right side of the upper triangle, as in picture 5.
Straighten the figure along the fold lines and turn the part over (Figure 6).
Bend the ponytail to the left and draw a muzzle (illustrations 7 and 8).

Origami paper fox is ready!

Collecting a fox on four legs

Master class on how to make an origami fox (assembly diagram attached):

Take a square piece of paper and make fold lines on it, as shown in pictures 1, 2 and 3.
Bend the bottom corner to the marked point (picture 4).
Make folds as in pictures 5 and 6.
Bend the figure in half (Figure 7).
Unscrew the edges of the figure (picture 8).
Fold the part again (Figure 9).
Spread the sheet, but not completely (pictures 10-12).
Fold the figure carefully along the marked fold lines (Figure 13).
The top part must be bent (picture 14).
Turn the figure over (picture 15).
Make several fold lines, as in picture 16.
Unscrew the marked parts (Figure 17).
Turn the part over and fold it in half (picture 18).
Make fold lines by bending the “wings” of the figure (Figure 19).
Fold the part in such a way as shown in pictures 20, 21 and 22.
Spread the figure a little so that it can be folded, as in pictures 23 and 24.
Make a few folds on the left side of the part (picture 25).
Straighten the left side of the figure (pictures 26 and 27).
Scroll the part (picture 28).
Now you have begun to emerge the figure of a fox.
Divide the left side in half and bend it (Figure 29).
Bend the right side to the left (picture 30).
Align the right side to the points marked in the pictures 31 and 32.
Make folds and tuck the inside of the future paw (picture 33).
Tuck the right side along the folds and bend the lower corner of the “paw” (picture 34).
Make the left part of the part, as shown in pictures 35, 36, 37 and 28. It should fold in such a way that a three-dimensional figure is obtained.
Form the head of the fox (Figure 39).
Give volume to the whole body (picture 40).

Isn't it time for us to add new inhabitants to the paper zoo? Today, the origami fox will replenish the collection of animal figurines. We will talk about 3 types of folding of a cunning forest beauty, the more interesting it will be to assemble a whole fox family, where each toy will be unique. Take an orange, preferably double-sided, colored sheet and a black marker to draw a cunning muzzle for a fox. More will not be required. Now watch carefully how to make a fox out of paper in no time.

Paper fox: option 1 - a simple toy

The first paper fox can be done even by kids. The following schemes will be more complicated, the more interesting it will be to tinker with them. We need a square piece of paper suitable color. You can make it from white office paper, and then color your animal or entrust this activity to children. Next, fold the paper in stages:

Fold the square of the sheet diagonally, then fold it in half along one of the bends into an isosceles triangle;
Bend the sharp corners of the resulting triangle to an obtuse corner. See fig. 1, step-by-step instruction in pictures will not allow you to make mistakes;
Now fold the workpiece in half away from you. Having captured all 3 "walking" corners, bend them towards you, focusing on the vertical axis of the convolution;
Then lay out the folded corners - the extreme ones will become ears, unfold the double central corner (from the inside) and squeeze it, forming a muzzle of a fox out of paper;
Bend inward a tail of colored paper, due to which the fox will become stable. The origami fox is ready, it remains to draw her eyes and nose.

Here is what you should get:

Paper fox: option 2 - Japanese fox

Do you want to learn how to make an origami fox in the classic Japanese technique? Everything is incredibly simple: by analogy with the first simple option toys. Here you will also need a square of paper sheet. Scheme 2 converges with the first instruction in paragraphs 1-2, then this origami fox folds a little differently. Proceed step by step, first repeat steps 1 and 2 (the previous fox craft is simple from a square), and then:

Bend towards you not “walking” corners, but a strip of plane on this side (as shown in Fig. 2). So you set the supporting "legs" of a cunning animal;
Next, expand the muzzle of the fox from the middle corner, straighten the ears and arbitrarily bend the tail so that the origami fox stands confidently, paint the fox out of paper.

We made it again! Hooray!

Paper fox: option 3 - voluminous complex toy

Ready to learn how to make a fox out of paper with your own hands, so that the beast looks like a real animal as much as possible? Then let's proceed to the analysis of the 3rd (most complex) scheme. She shows us how to make an origami fox with detailed anatomical study of body parts. The scheme is not easy, but you can be proud of yourself if you still manage to master the intricate folding technique. So:

Fold a sheet of paper from a horizontal orientation so that its side edges converge in the center, then the origami paper blank must be sharpened from the bottom and top. To do this, bend inward all 4 corners of the convolution, then unfold them (you need outlines of the faces);
Open the lower corner "pockets" from the inside (both) and squeeze along the plane. But the upper corners should not be opened, but tucked inward (both). Did you manage? We make a paper toy for children further;
We bend the upper corners (future ears) towards ourselves, focusing on the palpable groove. The ears need to be folded towards you again, reducing the resulting regular triangle. The ears overlap one after the other (see Fig. 3);
Bend the corners of the lower edge sticking up downwards, fold the bundle in half (basting the central axis) and return it to its previous position. Fold the structure along the axis with a step (accordion), as shown in Fig. 3. The bottom part now overlaps the top a little. We bend the corners of the step towards ourselves;
Turns the bundle face down and bends the head of the future fox towards him - the upper corner of the blank. Next, make limbs-separators of the front paws from the hind legs towards you (see Fig. 3 carefully);
Acting strictly according to the scheme, systematically form the details - paws, voluminous muzzle, tail. At first, the origami fox will seem angular, but then it will take on a spectacular final shape. You can watch the video if it is difficult to understand the scheme.

A voluminous fox is not made of cardboard - it is difficult to keep the shape of the workpiece. If you have mastered how to make a fox according to scheme 3, you can easily make origami animal figures of any complexity out of paper. For example, you are quite capable or amazing, which jumps or opens its mouth.

Didn’t understand how to make an origami fox, but still want to make a colored paper toy for your kid? Use a ready-made template (Fig. 4). There is no need to fool around with how to make a fox. It's simple: print the finished drawing, cut out the outline of the part and assemble the funny little fox for glue. It doesn't get easier.