The most important element of the shoe, which is responsible for its grip on the surface, is the sole. The main criteria for choosing a sole will be the protectors and the material from which it is made.

The main function of the sole protector is to protect the very base of the sole from moisture, cold and mechanical damage. And also protectors perfectly protect shoes from slipping. Pay attention to the height of the tread and the shape of its elements, which should be varied, from triangles to circles. For winter, the height of the treads should be greater than for other seasons.

Material properties are distributed as follows:

Leather sole: the most slippery material;

Hard rubber: slippery material;

Thermal rubber: moderately slippery;

Polyurethane: almost non-slip;

TPU: non-slip.

If you are not an expert and do not understand sole materials, this is not a problem. Try to bend the sole, if it is hard, then the shoes will be slippery. If soft and easy to bend, then this is the best choice.

When buying shoes for cold weather, be sure to first look at the structure of their soles. Boots with a smooth sole surface are completely unsuitable for the winter season, as they will not provide the desired grip in ice. The best option for winter shoes there will be a sole with a corrugated pattern and a good tread. But if the question of choosing new shoes is not before us, then we should secure the old one. This can be done in the following ways:

Glue. Apply glue to the surface of the heel and sole, Moment is best suited for this purpose. Then cut out pieces of sandpaper (preferably waterproof) or felt to the required size and glue them to the sole. It is also possible to cover the adhesive layer with coarse sand. After drying, it will create the effect of sandpaper. The method must be repeated every week, as the glue will gradually wear off.

Adhesive plaster. For this method, you need to purchase adhesive tape in rolls on a fabric basis. It is necessary to glue the patch on a clean, dried and warm sole in strips “crosswise”. This method is very simple and affordable, but short-lived, it only lasts for 2-3 days.

Potato. So that the boots do not slip, you need to rub the sole with raw potatoes before going outside or apply a solution of starch and water to the sole with a cloth. This procedure must be done before each trip to the street in ice.

Anti-slip pads. If you go to shoe repair shops, they can offer you professional anti-slip pads. They are cut according to the impression of the sole and are very tightly glued to the surface. This method looks the most aesthetically pleasing and invisible when walking.

Drawing drawing. If the shoes have a completely smooth sole, then you can apply a pattern on it yourself. This can be done with a nail, knife or other sharp object. The most important thing is not to pierce the sole, so you need to carefully make the relief of the sole.

Screws. The most durable method, which, however, can only be used on shoes with thick soles. The first step is to get small screws from any hardware store and screw them into the sole of the shoe. Then remove the ends of the screws that stick out too much. After that, the shoes will stop slipping, but will click like heels.

If you encounter a problem slippery soles There are several ways to correct the situation. Some take shoes to the workshop, others buy special linings, others use folk remedies. In this article, we'll take a look at each method. And we will learn in detail what to do if the soles are slippery on winter shoes.

If you just bought a pair, be prepared that the soles of your new boots will be smooth. After purchase, test the products on a smooth and wet surface.

If the pair slips, it is recommended to walk on an uneven surface or take the boots in your hands and rub the soles against each other. If this does not help, you can lubricate the shoes with a special anti-slip spray. However, the effect of such funds does not always justify the high price.

The most reliable, effective and durable way to get rid of the problem is to turn to professionals. In a shoe shop, special rubber stickers with a good tread or a small pattern are applied to the sliding sole. This will provide protection from moisture and ice.

Also, you can use the row folk methods at home. In any case, you first need to prepare the shoes. Rinse thoroughly and dry the sole. If you plan to glue something, it is better to degrease the surface, then the glue will adhere better and last longer.

For degreasing use acetone, alcohol or gasoline. After treatment, the boots must be completely dry. And then we will find out what to do so that shoes do not slip on ice or snow in winter.

Ten Ways to Make Your Soles Slip-Resistant

1. The use of glue and sand is the most common method due to its efficiency and availability. Action is enough for a month. First, rinse, degrease and dry the soles of the boots. Then apply “Moment” or any resin-containing epoxy adhesive to the surface. Wait for the adhesive to dry slightly. Pour sand over the smeared areas and leave until it hardens. Repeat the procedure after a month;
2. If you are not afraid to ruin your boots, sand can be melted into the sole. Then the procedure does not have to be repeated, and the action is enough for the whole season. To do this, the sand is heated in a pan for five to seven minutes. Then the boots are placed on hot sand, which, due to high temperature melt into the material. Make sure that the sole does not melt!;
3. Some attach a patch with a rough fabric base to the sole, but this method is not durable and only works for a few hours. Even with one long walk, it already peels off. One piece of the patch must be glued to the toe, the other to the heel or heel;
4. Instead of a band-aid, it is more efficient to use a cloth. Prepare four pieces of flannel, linen or felt. You need to glue two pieces on the heel and toe with rubber shoe glue. Leave until the glue hardens. By the way, if you use a large number of small patches, slip resistance will increase. Glue fabric pieces on the toe and heel area, like an applique;
5. You can lightly sand the sole with coarse sandpaper. But this method is not suitable for genuine leather! In addition, the treatment will have to be repeated before each exit to the street;
6. Nylon tights stay on the sole for a long time both in the cold and in the slush. To do this, set fire to the capron, it will begin to melt and drip. Direct the drops onto the surface of the sole so that several drops fall in one place and bumps form. Kapron keeps even on wet shoes;
7. For boots made of artificial materials, you can use hairspray. Spray the product on the soles and leave for two to three minutes. But this method, like the adhesive plaster, gives a short-term effect. The varnish is gradually washed off when walking in the snow;
8. You can buy ready-made ice access or rubber pads that are attached to the sole. You can make similar products yourself. To do this, simply screw the screws into the sole. But the surface treated in this way will make a knock and noise, scratch the floor in the premises. But on the street, such shoes do not slip either on snow or on ice;
9. Take an old felt boot and cut out the sticker along the contour of the sole. Apply glue to the sole and material, wait 5-10 minutes and then bond the plastered surface. Leave the products under pressure for the time indicated in the instructions for the glue. For gluing, use the standard "Moment" or epoxy glue. The best remedy will become polyurethane adhesive due to strength and elasticity;
10. If the shoes are on a high platform so that they do not slip in winter, you can use an aggressive method with a soldering iron. To do this, heat the tool and make a pattern on the surface of the soles of the boots. The deeper the grooves of the pattern, the more stable the shoes will be. But do not overdo it so that deep holes do not appear through which cold and moisture will penetrate.

How to choose shoes that don't slip

So that shoes do not slip in winter, choose products with soft or grooved soles. Be sure to pay attention to the material of the protectors. A suitable option would be thermoplastic elastomer. Polyurethane is also suitable, however, in ice and severe frosts, it begins to slip. Therefore, such material is used in the off-season and warm winters.

In order for winter shoes to last a long time and not slip, it is important to properly care for the products. This is especially true for boots with a grooved tread. Dirt that remains between the pattern reduces the protective function of the sole, and it begins to slip.

Wash and dry a couple after each use. It is recommended to smear the dried clean surface special cream or spray. Wait until the composition is completely dry and only then go outside.

With the advent of winter, cases of falling on ice-covered walking paths. To prevent such an awkward situation, and in the worst case, injury, will help special shoes with a deep pattern on the surface. This sole is also called tractor. The trouble is that not everyone is ready to wear shoes of this style. There is a way out, besides, everything that may be needed to solve this problem can be found at home.

Patch

The simplest thing that can be done is to stick a regular adhesive plaster over the entire length of the sole. Such protection against icing is quite enough for several days. In addition, the band-aid can be thrown into a purse and used when needed.

Potato

If from early morning the panorama outside the window draws pedestrians stealthily advancing to their place of work, and, as luck would have it, there was no adhesive plaster, an ordinary potato will help out. Everyone knows that its tubers contain starch, but not everyone is aware of its ability to resist slipping. It is enough to rub the soles of the boots with half a tuber and you can go out onto the icy street without fear. The disadvantage of such a means of protection lies in its fragility, but it is quite enough to get to the nearest bus stop.

Felt

Wearers of metal heels can prevent a dangerous fall on the ice with the help of ordinary felt. It is enough to cut out small pieces and glue them to the heels with Moment or Dragon glue. By the way, pieces of felt will be an excellent alternative to special rubber pads with a corrugated surface, which shoe shops offer to stick on the sole with the onset of cold weather.

Sandpaper

Felt can replace sandpaper. It is better if it is on a fabric basis - this will allow it to perform its functions longer.

plain paper

If you don’t have time to stick pieces of felt and sandpaper on the soles of your boots, you can simply walk along the soles of the shoes with paper several times and boldly go out. The problem is that such treatment will quickly lose its properties, so when you return home in the evening, you can try to equip your slippery boots with a homemade tread.

Sand "protector"

To do this, the shoes need to be washed, dried, the soles degreased and treated with glue. Without waiting for it to dry, sprinkle the sole with river sand. In the morning, the boots will be ready to withstand the ice. However, such a remedy also needs to be updated periodically - at least 2 times a month.

Nylon "spikes"

Some craftsmen go even further and offer a cardinal way to solve the problem. It is unlikely to suit the owners of beautiful and expensive model boots, but for those who wear shoes for the last season, it is quite possible to take it into service. To do this, you need to set fire to an old nylon stocking and as soon as molten nylon drips from it, substitute shoes under it with the soles up. The frozen tubercles will act as spikes that prevent falls and injuries.

Winter will inevitably come, and again people will begin to think about how to protect themselves in slippery weather. There are several methods to make winter shoes stop slipping, and here we will talk about them.

Each of these methods has its positive and negative sides compared to each other, but each of them requires minimal costs and gives maximum efficiency.

When buying shoes for cold weather, be sure to first look at the structure of their soles. Boots with a smooth sole surface are completely unsuitable for the winter season, as it will not provide the desired grip in ice. The best option for winter shoes would be a sole with a corrugated pattern and a good tread. But if the question of choosing new shoes is not before us, then we should secure the old one.

• Method one: Glue

First of all, apply glue to the surface of the heel and sole, Moment is best suited for this purpose. Then cut out pieces of sandpaper (preferably waterproof) or felt to the required size and glue them to the sole. Also, instead of these materials, you can cover the adhesive layer with coarse sand. After drying, it will create a sandpaper effect. This method must be repeated every week, as the glue will gradually wear off.

• Method two: Adhesive plaster

For this method, you need to purchase adhesive tape in rolls on a fabric basis. It is necessary to glue the patch on a clean, dried and warm sole in strips crosswise. This method is very simple and affordable, but not at all durable, it only lasts for 2-3 days.

• Method three: Potato

So that the boots do not slip, you need to rub the sole with raw potatoes before going outside or apply a solution of starch and water to the sole with a cloth. This procedure must be done before each trip to the street in ice.

• Method four: Anti-slip pads

If you turn to shoe repair shops, then they can offer you professional anti-slip pads. They are cut according to the impression of the sole and are very tightly glued to the surface. This method looks the most aesthetically pleasing and is not noticeable when walking.

There are also anti-icing pads that you can attach yourself. They are sold in tourist shops.

• Method five: drawing

If the shoes have a completely smooth sole, then you can apply a pattern on it yourself. This can be done with a nail, knife or other sharp object. The most important thing in this business is not to pierce the sole, so you need to carefully make the relief of the sole.

• Method six: screws

And the last way is the most durable. It can only be used on shoes with thick soles. The first step is to get small screws from any hardware store and screw them into the sole of the shoe. Then remove the excessively protruding ends of the screws. After that, the shoes will stop slipping, but they will click like heels and may scratch the wooden surface.

Tags: ,