From their own ribbons. Crafts from ribbons: how to make beautiful original crafts with your own hands
Flowers from satin ribbons look very beautiful. Every person who sees such an ornament will want to repeat it with his own hand. This activity is exciting and addictive. At first, something may not work out, but after a while you can learn everything. This will help step by step instructions on folding flowers from ribbons with your own hands.
Making satin flowers
Making flowers from satin ribbons is no more difficult than learning how to knit. The main thing is to carefully study the schemes for creating crafts. Then everything will work out. To work, you will need the following materials:
1. Ribbons of different width and color.
2. Threads of various shades.
3. Scissors.
4. Needles.
5. Sequins.
6. Fishing line.
7. Glue gun.
8. Tweezers.
9. Ruler.
10. Beads.
11. Candle.
12. Desk lamp.
13. Chalk or soap.
There are two ways to make flowers from ribbon - this is a reflow or a kanzashi technique.
The second manufacturing method came to Russia from Japan. In this way, the locals decorated the hairpins. In this case, several types of petals were used: sharp, round and long. Hairpins, clothes, hairpins or a headband are decorated with crafts.
Kanzashi Ribbon Color Scheme
1. To begin with, a workplace is being prepared.
2. You will need a table and a lamp with bright light.
3. A tape 6 cm wide is taken.
4. It is cut into identical squares.
5. The square is folded diagonally, after which the two corners fall to the central fold.
6. Thus, a rhombus is obtained.
7. The side corners are bent back, the cut point is clamped with tweezers.
8. It is straightened with scissors and then pollinated by fire.
9. The result is a round petal.
10. You will need several blanks.
11. The resulting parts are assembled with a thread.
12. It turns out a bud, which is glued to the base.
13. The middle is glued on top.
Flowers from satin ribbons using the kanzashi method are ready!
Flower of fused petals
Another common way to make crafts is the reflow method. Typically, the method is used for a large composition, for example, for a basket of flowers. When performing crafts with this technique, some nuances are taken into account:
1. Kanzashi petals look more neat than those made by melting.
2. This method is time-consuming, so it may not work the first time.
3. Not all ribbons are suitable.
4. Only ordinary, brocade, satin or nylon are used.
First, a blank is drawn on a sheet of paper. The template is cut out. A minimum of 12 petals are made. The template is applied to the tape, outlined in chalk, then cut out. Each petal is made smaller than the previous one. Flame pollinates the edge of each piece.
Ready-made crafts are collected in a bud. The work is done carefully so that the flower is symmetrical. The base of the craft is stabbed with a needle or pin, a sequin or bead is sewn into the middle. The flower is ready by melting. Such flowers from satin ribbons are well connected in bouquets for a gift.
Chamomile from satin ribbons
Chamomile has always been a symbol of sincerity and tenderness. This craft can decorate a bag or clothes. Chamomile is being done different methods. To do this, you need ribbons of various widths.
A ribbon 1.5 cm wide is taken. To make a flower, you will need scissors, a satin yellow ribbon, a fabric base, a 1.5 cm wide ribbon, matches and glue gun.
1. The tape is cut into 28 rectangles.
2. The length of each is taken at 4 cm.
3. The top of the segment is cut in such a way that a semicircle is formed.
4. The resulting workpiece is melted with a flame so that the edges are bent.
5. The lower front corners are wrapped towards the center.
6. The same is done with the rest of the segments.
7. The base is being prepared, a circle with a diameter of 2.7 cm is cut out of dense fabric.
8. 14 petals are glued onto the prepared base.
9. A few more pieces of blanks are glued under them.
10. Tape yellow color the middle of the craft is twisted.
11. It is fixed with a glue gun on the received product.
Beautiful chamomile is ready!
Ribbon flower 5 cm wide
To make the product beautiful and symmetrical, you need to follow the scheme of how to make a camomile from satin ribbon. There are two ways to form a flower. First option:
1. For a DIY ribbon chamomile master class, you will need the following tools: matches, satin ribbon, tweezers, scissors, glue gun, white satin ribbon 5 cm wide.
2. The white satin ribbon is cut into 14 pieces.
3. Each craft is cut 5 cm wide.
4. A round petal is made using the kanzashi method.
5. They stick together.
6. Then the middle is made: a loop is made from a satin cord, another one is superimposed on it.
7. Loops are held with tweezers.
8. The right end of the cord is punched through 3 holes.
9. A knot forms. The edges are singed with a candle.
10. The finished center is fixed on the camomile. The flower is ready!
To make crafts according to the second method, you will need a needle, matches, scissors, threads, yellow and yellow satin ribbons. white color, glue gun and candle.
The ribbon is cut into thin strips. The length of the workpiece is taken 7 cm. The edges are singeed with a candle or matches. Each blank is folded in such a way that a corner is obtained. The petals are turned over and the two sides are connected again. It turns out one big one. It will take only 5 blanks.
The middle of the bud is made, for this a circle of small diameter is cut out of cardboard, a yellow satin ribbon is glued to it. Now the flower is coming together. The petals are superimposed one on top of the other, sewn with a needle and thread. The middle is attached with a glue gun. The product is ready.
Craft from a tape 0.5 cm wide
To complete the work, you will need a white satin ribbon 0.5 cm wide, base fabric, glue gun, scissors, matches, yellow beads.
The white ribbon is cut into 24 pieces. The length of each workpiece is 8 cm. Each product is folded in half, a fold forms in the middle. The edges are melted with a candle. All blanks are performed in a similar way.
Then the base is made, for this a circle is cut out of dense fabric. Diameter 2.5 cm. 8 petals are glued to the base. Between them, the rest of the blanks are fixed. After that, the middle is done. The workpiece is smeared with glue, yellow beads are poured onto it. When it sticks, the remnants are shaken off. Use a toothpick to form a circle.
satin roses
Craft from satin ribbon and buttons
To complete the work, you will need a ruler, scissors, a tape of small width, buttons, matches and a glue gun. For the manufacture of simple flower the tape is cut into 6 or 8 thin strips. The edges are pressed with a match. The ends of the future flower are glued to the center of the blank with a glue gun. The elements are glued together in such a way that a bud is obtained. A button is glued to the center of the joints.
simple flower
To work, you will need scissors, matches, a pink satin ribbon, a needle and thread, a pencil and a glue gun. The pink ribbon is cut into 5 identical strips. The edges of the workpiece are melted by the flame. Using a pencil, a mark is made in the center of each part. The edges of the workpiece are fastened with a needle and thread.
The strips are folded in two. A few drops of glue are applied to the inner surface of the product and the sewn-in part is glued. The petals are strung on a thread and sewn together. A button or large beads are used as decoration of the core.
Felt roses
Flowers are made not only from satin ribbons, but also from felt or felt. For such a rose, you will need a needle and thread, super glue, tape of blue color, chintz, felt Green colour, wire.
A loaf of the future product is cut out of green felt. Six petals are made from chintz. The wire is wrapped with green tape, the edges are glued with a glue stick. The blanks are folded in two. Along the cut, they are strung on a thread. When the fabric is dry, it can be used for work.
Next, proceed to the manufacture of the button. To do this, an inflorescence is attached to the end of the wire, a stem is put on through a hole in the felt. A finished piece of petals is glued into the center. You can make several flowers, combine them into a bouquet. Tie everything with a beautiful ribbon. This set is perfect for a gift.
Pansies
Making pansies is very simple - the craft is done using the kanzashi method. For pansies you will need:
1. Purple ribbon 3, 4 and 5 cm wide.
2. Tweezers.
3. Beads.
4. Glue.
5. Hairpins.
Squares are cut out of the fabric, they are folded diagonally. The resulting triangle is folded in the middle twice. The edges of the fabric are cut off, melted with a flame. It turns out a petal. Several blanks are strung on a thread and tied together. By this method, a petal of a sharp shape is obtained. To get a round petal, the corners are bent towards the center. The same is done on the other side.
Satin ribbons are soft and pliable, easy to shape, and to finish the edge, it is enough to burn over the fire, so they are well suited for creativity. Making crafts will not take much time and labor, although they look complex and incomprehensible. Every needlewoman should once try to create a simple flower from this material.
Satin ribbons are a versatile material used for making crafts in various techniques. They are inexpensive, and the consumption is quite small. Detailed description crafts from satin ribbon for beginners will allow you to start creativity.
Panel of satin ribbons
Suitable tape for the manufacture of the following products:
- flowers, bows, snowflakes;
- voluminous animals;
- paintings and panels;
- Christmas trees and topiaries.
Flower headband
And also they decorate:
- clothes, shoes and hats;
- wedding paraphernalia (glasses, bottles of champagne, bridal bouquet);
- premises;
- Easter eggs and Christmas balls.
Reference! In order to decorate a gift box or bouquet, you do not need any additional tools. Enough satin ribbons and a little work.
Necessary materials
For the manufacture of each craft, materials are selected individually. Depending on the size, desired colors and purpose.
But there is materials and tools that will be needed in any case:
- tapes of various shades and widths;
- scissors, pencil, ruler;
- needle, thread;
- lighter or candle.
Important! To make crafts from satin ribbons, you can use a special soldering iron that simultaneously cuts the fabric and melts the edge.
Various crafting techniques
Crafts are made in various ways. They are easy to understand even for a beginner, although the products often look luxurious, natural and complex.
Kanzashi
The Japanese technique for making decoration of hairpins, headbands and hairpins from ribbons is kanzashi. Modern craftswomen create not only hairstyles using this technology, but also many other crafts. They are collected from individual petals, which are folded like origami. Kanzashi is based on two principles for creating petals: round and sharp. The rest is the fantasy of needlewomen (photo).
For work, you will additionally need glue and beads, rhinestones, sequins. Satin ribbons are pre-cut into squares.
Making round petals:
- Fold the square into an equilateral triangle.
- Bring the corners from the fold to the bottom corner so that a rounded line is obtained from above.
- Fold the side corners at the back. Align the edges.
- Burn the cut and press to secure.
In the finished product:
Making sharp petals:
- Fold the square in the same way as in the first option.
- Connect the two corners, with the fold at the top.
- Fold the petal in half again.
- Burn and fix the corner.
- Trim the bottom edge and melt the cut over the candle.
More often, flowers and snowflakes are used in this technique for hairpins, hairpins, headbands and rubber bands.
Butterflies and kanzashi flowers will become wonderful decoration clothes in the form of brooches, and voluminous swans, peacocks and Christmas trees - interior decor.
melted petals
This technique is good for creating roses, peonies and poppies. Flowers look natural, but not as neat as kanzashi. Only synthetic tapes are suitable for work. You can choose the right material only by trying.
Additionally, prepare tweezers with long tips, cores or beads. To create flowers from melted petals you need:
- Draw a petal on paper. If it is a circle or a flower shape, then each detail is 0.5 cm smaller than the previous one, at least 10. If it is a drop or a heart, then make 3-4 sizes of at least 6 pieces.
- Cut blanks from the tape.
- Melt the petals over the candle, while keeping them better with tweezers and at a short distance from the fire.
- Petals in the form of a circle and a flower are connected in the center, and a drop and a heart are collected at the bottom. Then the core is attached.
Crafts with melted petals are suitable for creating large flower arrangements. And also for decorating brooches or hats, but you should carefully choose the style of clothing for such accessories.
Satin ribbon embroidery
Any embroidery is popular at all times, and if you add ribbons to it, the picture seems to come to life. The creative process is complex, and requires special perseverance and accuracy from the master. To work, you will need a base fabric and a special needle with a large eye.
Before starting work, it is worth studying the basic stitches of the technique:
Straight stitch. It is carried out according to the type of thread seam. Used to create petals.
Straight stitch
French knot. Suitable for the image of buds. The needle is brought to the front side and wrapped with tape, then a puncture is made next to the previous one and the needle is returned inside out.
french knot
Twisted stitch. On the face, the tape is pulled and twisted so that even turns are obtained. The needle is stuck at the right distance and brought to the wrong side, where the tape is fixed with threads.
Twisted stitch
Japanese seam. The tape on the face is laid out and the needle is stuck into it, leading to the wrong side. This is how leaves are created.
Japanese stitch
Knowing these stitches, you can easily learn how to sew derivative stitches.
Satin ribbon embroidery
Volumetric rose embroidery
Stages of work:
- On the fabric outline the location and size of the flower. From the center draw 5 rays at an equal distance. With thick threads, seams are laid along these rays. And then a ribbon is pulled through them in a checkerboard pattern.
- A piece of tape is shirred at the bottom, and twisting in a spiral, a bud is formed, sewn with threads.
- The most natural look is a rose embroidered with Japanese stitches. They start working from the core with small stitches, then they are increased and laid in the shape of petals.
Pictures and panels are embroidered with ribbons, and are also used to decorate clothes, bags, pillows.
Important! In work, it is better to use a thick, blunt needle. So the hole will be large enough for the tape and it will not break the threads of the materials.
Other options
There are many more various kinds"ribbon art".
For example, the bride's bouquet can be made from twisted roses. To do this, you need a tape 4-5 cm, 1.2 m long. On one side, a corner is folded and twisted into a tube. To the end of the length, wrap the core with tape, twisting it at small intervals, from the face inside out and back. The second edge is hidden under the last petal, and the structure is fixed with a thread.
Bridal bouquet of twisted roses with beads
In the artichoke technique wonderful New Year's toys. To do this, you need a foam base, satin ribbons of three colors 5 cm wide. We cut them into squares and iron them in half. Attach one square to the base. Align the center of the rectangle with the center of the square, wrap the corners and secure. Next, in the same vein, pin the remaining details. Decorate the top of the balloon with a bow.
Advice! To fasten details in this type of patchwork, it is customary to use pins with a flat head.
Artichoke technique: Christmas toys
The variety of shades and sizes of ribbons allows you to make each craft unique. And having gained experience, needlewomen begin to experiment, coming up with new ways to make petals. Therefore, every day there are more and more beautiful and interesting works in various techniques.
Content
Crafts from ribbons are beautiful and original. Their manufacture is quite troublesome and time-consuming, so for young children such creativity is not suitable. Older children can do such crafts, for example, junior schoolchildren. If the baby has an older brother or sister, he can directly engage in the manufacture of crafts, and youngest child will be an "apprentice". Choose the material by size and color, choose which ones you like best - all this is within the power of the baby. By helping an older child, the baby will feel needed and useful, and working together will develop organization in him.
If your kid is not indifferent to ribbons, you can come up with simple products that he can make himself.
Herringbone
TO New Year's holiday you can make interesting and a simple Christmas tree. For her, you will need two colored ribbons - green and brown, for the crown and trunk, respectively.
Cut off three pairs of pieces from the green tape. The first pair should be the longest, the second - shorter, and the third - very short. The brown ribbon will be the trunk. We fold a piece of green tape into a loop and fasten it to the trunk, we fasten the second paired piece opposite, crosswise. Having glued all three pairs, we get a Christmas tree. The crown can be decorated with a shiny bow.
DIY decoration
A variant of satin ribbon decoration that can be put on the wall or decorate a gift box with it.
Necessary materials:
- Semicircular base. You can take foam or quick-drying clay.
- Satin ribbon
- safety pins
Manufacturing:
The tape must be cut into pieces, roll each into a ring and attach to the base. The craft is ready. It can be inserted into a cupcake mold or glued onto a gift box (for gift box only foam base is suitable).
There is another option:
The ribbon cut into pieces is strung on a thread, and not folded into a ring. One edge must be sewn with a needle and thread, pulled into a bow and glued to the foam. The top will be lush and beautiful.
Crafts from ribbons can decorate a photo frame. To do this, you need a pink ribbon, from which we will make a butterfly. We cut off a piece that will be twice the length of the intended butterfly. Fold in half and stitch. Then you need to roll two eights, or you can one double. Sew and attach to base. Butterfly antennae can be made from thread.
From dense rapeseed ribbons are also obtained interesting crafts. They can serve as a decoration for a hairpin or just a beautiful craft.
Crafts-animals
To make a cute turtle, you need to prepare two ribbons: pink and green. You can also use satin, if you first compact it with material (two lengths are taken and sewn on a typewriter, laying in the middle with a cloth or elastic band of the desired width). Next, we make four rings of the same size and insert them one into the other, forming a ball. From each side we sew two loops of green tape - these will be the paws. On the front of the ball, a piece of green ribbon with a loop at the end will serve as the turtle's head. Eyes can be made from beads (ask your child to choose the right ones) or sew on toys.
The same is true for octopus.
A ball is formed from four rings - a head, decorated with eyes. Now, to make the tentacles, you need to take eight pieces of tape, twist into a spiral and secure with a thread. The curious octopus is ready. You can decorate it with a bow, or a toy hat.
A variety of handmade muzzles can be attached to a purse, notebook, photo frame or hairpin. By attaching a pin to such an attractive face, you can get a keychain or brooch.
The whole principle of work is to create a base - a strip folded in half and stitched. Two loops are dog ears, a triangular muzzle, a pompom for the eyes and nose. And, of course, an elegant bow for decorating crafts. You can give such crafts for the birth of a child, for example.
Another option for crafts that can be made from rapeseed tape:
Flowers
A school-age child may well prepare a gift for his mother or grandmother on March 8th.
Rose for mom
A silk ribbon is taken, one or more colors, a piece suitable for the formation of a flower is cut off. The edge of the tape must be stitched with a thread and slightly pulled off.
As stems, you can take a plastic tube of small diameter or a knitting needle. We decorate the stem with green tape and glue. Then we apply its edge to the ribbon and twist the rose, securing it with a thread. We repeat several times, the bouquet for mom is ready for the holiday.
Flower gift for grandmother
Grandmothers always occupy a separate place in the life of a little man. Children feel great love and affection and want to repay as much as they can. You can ask your child to do a beautiful craft from tapes. It does not have to be some kind of holiday, because a grandmother always loves a child.
So, we take multi-colored ribbons, cut them into small pieces, from which the petals of the future flower will be formed. Your child can help cut the tape, or in extreme cases, find and give scissors. It is very important to contact the child with a request for help, he will feel his importance.
Each piece is folded in half and stitched along one edge, as a result, a triangle should be obtained on one side.
The edges of the stitched piece are bent a little on both sides, and turned inside out in the other direction, as in the figure. It turns out a petal. There are several such petals, depending on the size and splendor of the flower.
