home » Needlework » How to make different fruits from rubber bands. Rubber band weaving: fruits and vegetables for little gardeners

How to make different fruits from rubber bands. Rubber band weaving: fruits and vegetables for little gardeners

What can be woven from Rainbow Loom rubber bands? This question is very relevant for beginner needlewomen. Very interesting idea- tiny vegetables, fruits and berries made by hand. Such "delicious" crafts can be useful both as decorations for the dining table, and as components fashion accessories such as bracelets or necklaces. And such bright game paraphernalia will bring a lot of joy to children! After all, these wonderful toys will make the usual puppet tea party even more interesting and varied. Here we will tell and show in detail about weaving various bright and tasty fruits and vegetables from rubber bands.

Even for those who have just started to get involved in weaving from elastic bands, it will not be difficult to weave fruits and vegetables, especially with the help of this article.

We study the weaving of elastic bands of various delicious fruits and vegetables

Appetizing strawberry:

Strawberries are a berry known to everyone, and very popular, so let's start with it. This product is easy to weave on a slingshot, or any other machine with two columns. Prepare the following:

actually a slingshot (or machine);
Crochet hook;
13 red rubber bands;
5 green rubber bands.

If your machine has notches, turn it so that they are visible to you - then it will be much more convenient to hook the rubber bands with a crochet hook. You need to knit a berry, starting with red rubber bands, and only then making green sepals.

Take one red rubber band and wrap it three times around the right rod. The remaining red elastic bands are worn in pairs. Just put the first pair on two pins without twisting them, and then throw off the initial elastic band on the right side into the center of the weave.

Throw on the next pair. The one that was in front of her, remove from the right column and discard to the center. Next, throw the top two elastic bands from left to right.

Put a couple more elastic bands on both columns of the slingshot. Remove the two lower rubber bands from the left rod and send to the middle. Repeat this one more time, adding a couple of elastic bands on top. Now transfer the top two elastic bands from the right to the left column.

Add two more red rubber bands and discard the two middle pairs from the right column. Move the top pair from right to left.

Finally, the last pair of red rubber bands. Place it on both pins, and send a pair of lower rubber bands to the middle on the right side.

It's time for the green rubber bands. Put two pieces on the posts. Then discard one pair of reds on the right side, and the top two pairs on the left. Transfer the green rubber bands from the left to the right rod.

Throw on a couple more greens, and then drop all the other reds in the middle. Put on another green rubber band, this time a single one, and throw off all the remaining ones on it. Transfer one of the sides from one column to another, and place the last one in the center.

Remove the remaining loop and tighten it to make a ponytail. The berry is ready!

We make a beautiful tomato with our own hands

Before you start weaving, make sure you have everything you need to make this craft. Such simple figures can be woven without a loom using a fork or your own fingers. However, on the machine, of course, it will be much more convenient. So, you will need:

machine with two columns (optional);
hook;
8 red rubber bands;
3 green rubber bands.

To begin, put one of the red rubber bands on the right column, wrapping it around twice. Stretch three more rubber bands in the same way. Place the rest of the red rubber bands on both columns of the slingshot.

Crochet all eight rings and remove them in the middle. Then pull one green rubber band on both columns, and remove all red ones.

Transfer one of the green loops to another column, threading it into the second loop.

Insert the last two green elastic bands into the tip of the ponytail and pull off its long end.

We knit quickly and simply a tropical banana

Knitting a banana from rubber bands is very simple - you just need to weave a small oblong cylinder and finish it with a loop. And if you do it on a hook and a slingshot, everything turns out to be even easier. cook necessary tools and materials:

hook;
slingshot or machine;
15 yellow rubber bands;
4 green rubber bands.

Wrap the first green rubber band three times around the right edge of the slingshot. You should get three rings. From above, on both columns, put on a couple more yellow rubber bands. Throw the green one in the center.

Throw four yellow rubber bands on both sides at once. Remove the previous two and place in the middle. Put on four pieces again and lower the bottom ones, and then three more and lower them again.

Add two green rubber bands. Drop the yellow ones on them and put on another green one. Lower all the already worn green rubber bands onto it. Remove one of the loops and transfer to another column.

Pass one loop through the other and tighten well. Remove the finished product from the slingshot.

Do not limit yourself to simple figures, try to make three-dimensional 3D fruits. In the "Video" section you will find detailed video tutorials that clearly show how to make them.

Video on the topic of the article

Now you can add delicious fruits to your collection of colored rubber band crafts! We present to your attention workshops on weaving a bright orange, a delicious banana and a juicy strawberry. In the summer they will be more relevant than ever.

From colored elastic bands for weaving, you can weave many bright fruit figures.

This video shows how to weave a pineapple out of rubber bands. Such a pineapple is weaved very easily, without a loom. To weave it, you will need elastic bands of two colors: 28 yellow and ten green.

And this video shows how to weave a pineapple on a loom:

This video shows how to weave an orange out of rubber bands:

Here detailed description how to weave a banana out of rubber bands:

And here the figurine is more complicated - a very beautiful 3d grape:

Here is a way to weave an apple from rubber bands:

As you can see, it is not difficult to weave fruits from rubber bands, and even beginners can weave such figures. After watching a few videos, you can weave other fruit figures in a similar way.

Different fruits can be woven from rubber bands, while you can use different weaving options and different devices for weaving rubber bands.

1. An apple made of rubber bands. There are options for weaving a simple apple figurine and a voluminous figurine of a cheerful apple. Master classes can be found - How to weave an apple from rubber bands.

2. Pear of rubber bands. A pear can also be woven in different ways - only with a hook or on a loom, a simple figure or a voluminous one. Different options for weaving a pear - How to weave a pear from rubber bands.

3. Pineapple from rubber bands. There is a master class on weaving a beautiful voluminous pineapple. You can weave a simple flat figure. Different options for weaving - How to weave a pineapple.

4. Banana from rubber bands. A banana figure can be crocheted, on a slingshot and a three-dimensional figure on a loom. There are even different options for weaving 3d bananas. A lot of different options weaving a banana - How to weave a banana from rubber bands.

5. Rubber band orange. several different options for weaving a small figure of an orange can be found - How to weave an orange from rubber bands.

The hobby for weaving from colored rubber bands appeared quite recently, but already on the Internet there are a lot of lessons on weaving from colored rubber bands, including fruits. With rubber bands, you can make completely different fruits and an orange, and an apple and a banana, and a lot of things. For an example, of course, it is better to watch the video.

Rubber band banana.

And here is the strawberry.

juicy raspberry

In our society, there are more and more craftswomen involved in needlework. Exists a large number of specialized stores. They offer a wide range of products for classes. different types needlework. After all, now to be able to create something with your own hands is a fashion trend.

If you want to learn on your own or help your child master some interesting activity, try weaving vegetables and fruits from rubber bands. It's simple and exciting. And products with simple and multi-colored material that does not fade, is not afraid of water and frost, will last for a long time.

Someone buys ready-made kits for making bracelets, earrings, beads, figurines, figurines. Someone acquires separately materials and turns them into works of art. There is a special technique that makes it possible to create original crafts. So, how to weave vegetables and fruits from rubber bands? If you like this activity, you can create a whole collection of crafts that will decorate the interior with an art corner.

Weaving occupies a special niche in needlework

Surely on the street they met children who had multi-colored bracelets on their arms and legs. And sometimes adults also put on intricate accessories, which looks no less bright and interesting. And this is not surprising. After all, now this kind of skill is in vogue. It is hard to imagine how such decorations are created, and even more so vegetables and fruits.

If you decide to master such a hobby, stock up on materials and patience. You need to start simple. For weaving you will need:

a slingshot with horns or a frame with a hook;
multi-colored rubber bands;
fasteners.

With the help of a plastic slingshot, the work is easier and faster. However, a more advanced and difficult tool is being sold - a frame with a hook. It produces more complex options.

Materials can be easily purchased at a stationery store or at specialized outlets for sewing and needlework.

If you decide to use the easier option, a slingshot with horns will already be attached there. There are also 2-sided with 4 horns and completely different in size.

Weaving techniques

When buying this or that set, you can choose the color that you like more than others. If you want to master the weaving of elastic bands, fruits and vegetables are best made from red, purple, green, orange. They suit you better than others. If these are simple figures, then you can use beige, black, white, and so on. In addition, on sale you can find striped and neon colors.

Weaving can be done in the following techniques:

"fish tail";
"caterpillar;
"iris";
"dragon scales";
"French braid";
"spider".

For example, the first method, which is called "fish tail", allows you to make a massive tourniquet. It can be made from 50 rubber bands. In order to make a work in the "caterpillar" technique, you need a machine with 4 pillars. For the "iris" you will need a fork, and for the "dragon scales" technique - a hook and a loom with 1 row of posts. For a "spider" a machine with 3 columns is enough. So you can weave not only bracelets, but also fruits and vegetables from rubber bands on a slingshot.

For carrots you will need orange and green materials

Fruits and vegetables from rubber bands are very popular in weaving. Let's look at how to make carrots. How to weave fruits and vegetables from rubber bands? First you need to prepare the materials. In this case, we will use 13 orange rubber bands and 7 green ones. It is also worth preparing the tools.

Take the orange rubber band with the crochet hook. Next, you need to wrap it 2 times. You should end up with 3 rings.

Take the next two. Remove the resulting rings on them. The hook must be threaded through two holes.

According to the instructions, you should have 3 rings. If you do everything right, they will hang down in the middle of the elastic bands.

Now you will need to put on 2 more elastic bands, and the previous 2 will have to be removed and tightened in the middle.

Thus, you need to weave 2 times. After that, you should have several rows. In this case - 5 pcs.

Take your hook and thread it through row 3.

Take 2 rubber bands. Now shoot row number 3 to them in the middle. What remains, string on the hook. You should now have 2 side rows.

Prepare green gum for carrots

The next step in the instructions on how to weave fruits and vegetables from rubber bands is making a stem. You need to take 2 green rubber bands. String them on a hook, and then pull them into the middle of the orange part.

Now take 5 pieces of green. Remove 2 rings from the hook. Put 5 green ones on it, and then pull on the rings that you removed.

Pull aside 5 pieces. There should be rubber bands at the ends. Pull them into the other 2 and tighten.

You can remove the hook. Pull out 2 rings and wrap them around 5 green ones on both sides in turn, like in a tail.

You can enjoy the result! Now, if necessary, you can explain to beginners how to weave vegetables and fruits from rubber bands.

Banana is another fruit

Fruits and vegetables from rubber bands are very spectacular. The main thing is to follow the instructions. Therefore, if you are in doubt and do not know how to weave them from elastic bands, the vegetables and fruits from this article can be a great example for you.

Let's be honest. Banana is easier to make. To weave it, arm yourself with 15 yellow and 4 green rubber bands. So let's get started.

Pick up a slingshot. Put on green on one side and wrap it twice. You should have 3 rings.

Prepare two yellow ones and put them on. Pull down the rings Green colour in the middle of the yellow rubber bands.

Now put on the four yellow parts. And those that were in front of them - 2 pieces - lower into the middle.

Just a little bit left

Put on two green rubber bands, lower the yellow rubber bands on them. After that, wear green. String on it the previous gum of the same color. Remove one end and put on the other.

Now you need to pass one end through the other. Feel free to tighten. Shoot with a slingshot.

Well, you have mastered and know what weaving from rubber bands is. Handmade fruits and vegetables are a matter of pride. So you have replenished your collection with a banana.

red rubber tomato

In this instruction we will tell you how to weave fruits and vegetables from rubber bands. You will learn what is needed for weaving a tomato. If you do everything right, your collection will have a bright and original craft. Let's start creating it.

For work, take 5 red and 3 green rubber bands. Then do the following steps.

Thread the rubber band onto the tool 2 times. Then put on 4 red elastic bands. Now there should be 4 left. They must be strung on one and the other end.

You should have 8 rings. Crochet them in the middle of the four rubber bands.

The next step is to put on the green one and remove all 4 parts. Now you need to thread one end of the green elastic band into the other.

Finally, insert 2 green ones into the slightly tightened side of the tail and tighten the end. Add a tomato to your fruit. All is ready!

What can be woven from Rainbow Loom rubber bands? This question is very relevant for beginner needlewomen. A very interesting idea is tiny handmade vegetables, fruits and berries. Such "tasty" crafts can be useful both as decorations for the dinner table, and as part of fashion accessories, such as bracelets or necklaces. And such bright game paraphernalia will bring a lot of joy to children! After all, these wonderful toys will make the usual puppet tea party even more interesting and varied. Here we will tell and show in detail about weaving various bright and tasty fruits and vegetables from rubber bands.

Even for those who have just started to get involved in weaving from elastic bands, it will not be difficult to weave fruits and vegetables, especially with the help of this article.

We study the weaving of elastic bands of various delicious fruits and vegetables

Appetizing strawberry:

Strawberries are a berry known to everyone, and very popular, so let's start with it. This product is easy to weave on a slingshot, or any other machine with two columns. Prepare the following:

actually a slingshot (or machine);
Crochet hook;
13 red rubber bands;
5 green rubber bands.

Throw on the next pair. The one that was in front of her, remove from the right column and discard to the center. Next, throw the top two elastic bands from left to right.

Add two more red rubber bands and discard the two middle pairs from the right column. Move the top pair from right to left.

Finally, the last pair of red rubber bands. Place it on both pins, and send a pair of lower rubber bands to the middle on the right side.

Remove the remaining loop and tighten it to make a ponytail. The berry is ready!

We make a beautiful tomato with our own hands

machine with two columns (optional);
hook;
8 red rubber bands;
3 green rubber bands.

Crochet all eight rings and remove them in the middle. Then pull one green rubber band on both columns, and remove all red ones.

Transfer one of the green loops to another column, threading it into the second loop.

Insert the last two green elastic bands into the tip of the ponytail and pull off its long end.

We knit quickly and simply a tropical banana

hook;
slingshot or machine;
15 yellow rubber bands;
4 green rubber bands.

Throw four yellow rubber bands on both sides at once. Remove the previous two and place in the middle. Put on four pieces again and lower the bottom ones, and then three more and lower them again.

Add two green rubber bands. Drop the yellow ones on them and put on another green one. Lower all the already worn green rubber bands onto it. Remove one of the loops and transfer to another column.

Pass one loop through the other and tighten well. Remove the finished product from the slingshot.

Do not limit yourself to simple figures, try to make three-dimensional 3D fruits. In the "Video" section you will find detailed video tutorials that clearly show how to make them.

Video on the topic of the article

On this moment, weaving from rubber bands is one of the most popular types of creativity. The master classes from this article are very simple, children can easily handle them. And weaving fruits and vegetables from rubber bands with your own hands will help them develop fine motor skills and perseverance.

Origin of weaving

Weaving is one of the most ancient types of needlework. Even before our era, people made various utensils from vine branches and grass. And later, new materials began to appear that made it possible to make jewelry, for example, beads. Weaving has become a real art.

However, a lot has changed since ancient times, and new materials have appeared in the world. These include multi-colored rubber bands. They are made in the factory by dipping. The same technology is used to produce air balloons. First, the tube is dipped in molten rubber, and after drying, it is removed from the base and cut into thin rings.

Chong Chun Ng invented this wonderful material. He came up with a machine for his daughters, which facilitated the process of weaving. He liked this idea so much that he put it into practice and made a patent for the invention. Rainbow loom is a set of 600 rubber bands in different colors and 2 looms. One of them is a slingshot, and the second is a platform with plastic posts.

With the help of weaving, from rubber bands you can create various crafts and accessories such as toys, key chains, various figurines, bracelets and even clothes.

Mastery Fundamentals

To begin with, let's figure out what you can weave from rubber bands. The weaving technique also depends on the choice of tool. So, the work can be done:

On a Rainbow loom;
On a plastic machine-slingshot;
On fingers;
On hook;
On sticks or pencils;
On a table fork;
On the comb.

Work on the machine is to alternately set loops of rubber bands, and then remove them from the columns according to the appropriate scheme. With it, you can weave bracelets, figurines and even a phone case.

Small items and baubles are woven on a slingshot. The process consists in a set of elastic bands on the teeth of the slingshot and removing them to the center between them. The process of weaving on table forks, fingers, comb and pencils is also similar.

But the hook is a special tool - you can weave directly on the hook and crochet. What is the difference? When weaving on a hook, the work is similar to weaving on a slingshot, only the loops are pulled through each other and hung on the hook itself. But crocheting is called lumigurumi. Most often, it is performed in a circle, this allows you to create 3D toys. Especially like this type of weaving for those who know how to crochet. After all, gum is a very interesting material, and the abundance of colors and properties (there are luminous irises) will allow you to realize all your creative fantasies.

Now you can get straight to work.

Banana, carrot and cucumber

What do these vegetables and fruits have in common, of course, is their elongated shape. So, you can weave them in one way, just pick up the rubber bands of the appropriate color. These master classes are perfect for children and for beginners to learn weaving from rubber bands.

To get the job done you will need:

Machine-slingshot;
Hook;
Multi-colored rubber bands.

Make the first loop by wrapping one column of the slingshot with three turns of the elastic band of the desired color.

Throw two elastic bands on both teeth of the machine and remove the twisted loop in the middle so that it hangs on these two elastic bands.

Put on four irises and slip off the bottom loops.

Weave three rows, stretch a pair of green rubber bands and remove the bottom row on it.

Add one green iris and remove the lower loops. Pull the remaining ears through each other and pull off the loops.

Banana woven on a slingshot is ready! Cucumber and carrots are woven according to the same pattern.

Please note that carrots have a few gummies added as tops.

tomato and apple

Delight the dolls of your beloved daughter with a juicy apple or a ripe tomato. To weave them, take:

Slingshot;
Hook;
Rubber bands.

On the right column of the slingshot machine, alternately put on four rubber bands twisted into a figure eight. Further, four straight elastic bands are put on both teeth. From the right prong, throw off all the loops to the center. Put on a green iris and remove all the loops on it from both columns. Pass the ears through each other and pull tight. Depending on the chosen color of the irises, you can get a red tomato or a green apple. As you can see, weaving can be done without a machine.

Ripe berries

Perhaps not a single summer is complete without a rich harvest of sweet strawberries. We offer to weave it from rubber bands on a slingshot.

Make a triple turn of the elastic band around the right column of the slingshot machine. Throw a pair of red irises over both horns and slip the loops into the center.

On the next pair of elastic bands, you need to throw off the loops only from the right column. Transfer the top two elastic bands from the left pin to the right.