DIY bow for September 1st. The simplest and most beautiful bow for the most beautiful daughter
“Do-it-yourself bows for September 1? - Elementary! - exclaim experienced mothers. They share their secrets on how to create unusual decorations for the celebration of Knowledge Day with minimal time and effort.
Do-it-yourself bows from satin ribbons for September 1: a master class on video
Black and white is always relevant. By the way, classic colors school uniform These two antagonistic colors have always been there. White top, black bottom - remember? So let's try to create our fancy holiday bows for September 1st in these monochrome colors.
Do-it-yourself materials for bows on September 1
- 2 cuts of black satin ribbon size 25*5 cm
- 1 cut white satin fabric size 23*5 cm
- 2 pieces of white ribbon with black polka dots 15 * 2.5 cm and 20 * 2.5 cm
- Scrunchy
- Scissors
- Glue gun
- Satin ribbon scraps
- Lighter
Step-by-step instructions on how to make bows from satin ribbons on September 1 with your own hands
- We will process with a lighter the edges of our satin material to keep the fabric from fraying.
- We make a fold in the middle of the first cut of the black tape, then we bend both ends of the cut to the center, in the form of a bow. We fix the ends with a few sewing stitches.
- On the same thread, we string the second black satin in the same way. We have a double bow. We intercept it in the middle with a thread, straighten the ends.
- Similarly, we make bows from white and black and white material 20 * 2.5 cm in size.
- We tighten the second black and white piece of tape with a thread. We fold the ends in half lengthwise, make small oblique cuts with scissors.
- It's time to assemble our decoration. First, we glue the ends of our black bows in such a way that we get a decoration that looks like a butterfly spreading its wings. Then, applying glue to the center of the black bow, we put a white satin decoration in the center. At the end, we glue the smallest one, white bow hic in black polka dots.
- The last step is gluing the decorative ends of the black and white bow. Their role will be played by our cut with obliquely cut ends.
- On the back of the bow, glue the hair band.
- We decorate the joint of the elastic band and the finished accessory with a narrow piece of fabric.
A classic satin ribbon bow for September 1, a master class with step by step photos
Another example of how to make a beautiful accessory for decorating a hairstyle from an ordinary satin ribbon, which will come in handy not only on the first of September, but also on any other holiday. In addition, making such beauty is very easy!
DIY step-by-step making a bow for a girl on September 1
Do-it-yourself kanzashi bows for a girl on September 1, a master class with a photo
The kanzashi technique involves creating a bow in the form of a flower using numerous small petal elements. The more petals there are, the more beautiful our decoration will turn out.
Necessary materials for the manufacture of kanzashi bows
Let's start with mastering the simplest kanzashi bows. We will need:
- 40 pieces of white satin ribbon measuring 8 * 1 cm
- 10 pieces of silver satin ribbon measuring 8*1cm
- Small piece of felt
- Square piece of white satin
- Stationery knife
- Candle
- Scissors
- glue gun
- Scrunchy
- Lighter
How to make do-it-yourself kanzashi bows for September 1 - step by step instructions
- We fold the white and silver pieces of satin into petals, fastening them over a burning candle.
- We cut out a circle from white felt, which we glue with a square piece of white satin. Draw symmetrically two dashes 1 cm long, then cut holes through them with a clerical knife. Do not forget to singe the edges of the holes with a lighter.
- Fasten the white hair band to the base. Cut out the base in the shape of a circle, carefully glue its satin edges inward. Let's start attaching the petals.
- The middle of the flower can be decorated large bead or a pearl.
Do-it-yourself kanzashi bows for a girl on September 1, step by step photos
Another interesting decoration made using the kanzashi technique is shown in step by step photos master class on creating original bows by September 1st.
- Let's take cuts of bright colored satin ribbon and classic white. Please note: colored cuts should be narrower and longer than light cuts!
- Pieces of colored satin ribbon are bent in half in the form of petals and gathered at the base with a thread
- We string ready-made colored petals on one thread
- We straighten the finished bow.
- We fold the white petals in half - use special tweezers for this work
- Fold the white section in half again.
- Turning folded pieces of fabric inside out
- We fasten the resulting petals with a thread together in the shape of a flower.
- straightening White color ok future decoration
- We attach the base to the hair elastic
- we put together all the parts of our kanzashi bow.
Do-it-yourself bow for September 1: a video lesson and a photo of a master class on creating a festive accessory
The easiest option is to make an "American" bow for September 1st. All that is needed for this is two satin pieces 25 cm long and one smaller one - 6.5 cm, a lighter, scissors, a needle, thread, glue, an elastic band or a hair clip.
We offer another interesting interpretation of an elegant accessory:
- take a long piece of black and white satin
- tie a beautiful decorative bow out of it
- We will make a similar bow, only smaller in size, from a translucent organza
- Complement the decoration with a bright bow of a red narrow ribbon
- From three bows we will make a beautiful multi-layer decoration and attach an elastic band for hair on its back side
- Let's complete the work on the pearl decor accessory
Lush bow for September 1: we create beauty with our own hands
The kanzashi technique will help in creating unusual lush bows that any schoolgirl will be delighted with.
Necessary materials for a magnificent bow to school on September 1
- 30 pieces of white satin size 5 * 21 cm
- Needle with white thread
- glue gun
- 30 small pearls
- Hair clip or scrunchie
- A small piece of felt (the base of the bow)
Step-by-step instructions on how to make a fluffy bow on September 1 with your own hands
- We fold each piece of shiny fabric, as shown in the video. We sew them with a thread so that we get a flower. The base of each "flower" is also stitched with a thread.
- We attach a felt or cardboard base to the elastic band, thread a narrow satin ribbon into it. She will decorate the junction of the elastic band and the finished hair ornament.
- With a glue gun, we begin to assemble the finished product.
- We decorate a ready-made lush bow with pearls or sequins.
Do-it-yourself lush bow for a girl on September 1, a master class with step-by-step photos
We will need:
- 30 pieces of satin with finished edges
- Tweezers
- Round base made of felt with a diameter of 4 cm
- Scrunchy
Step by step instructions on how to make a fluffy bow for a girl
- We glue the inside of the satin cuts
- With the help of tweezers make a small bend
- We make a “petal” from the cut and singe the base over the candle
- Glue the petals to the felt blank in dense rows slightly overlapping.
- Upon completion of gluing the bottom row of petals, we continue to “build up” our decoration.
- As a result, you should get a lush bow-flower.
Summer is coming to its logical conclusion, which means that very soon September 1st. On the eve of Knowledge Day, mothers and daughters pick up outfits, as well as accessories for them. The latter complete and complement the image of the student. Bows are traditionally considered an integral part of the festive line. site prepared for you simple master classes for making bows.
Option 1.
Take 2 different shades of satin ribbons 4 cm wide and cut them into pieces 32 cm long. Fold with the wrong sides to each other. Attach a ruler to one edge, make a mark at a distance of 11.5 cm, bending the tape. Secure the place of the bend with a tailor's pin.
Do the same manipulation with the second edge of the ribbons. For one bow, 2 such blanks are required.
In the way of crossing, fold one blank, as in the picture. Fasten the center with a pin.
In mirror image, do the same with the second blank.
Bend the ends of the first part under the bottom.
Bend the left tip again under the bottom, connecting with the top, and bend the right tip up, also connecting with the top. Fasten the bottom with a pin.
With the second part, repeat all the same operations in mirror image, completing the last bend of the tips in reverse (right - up, left - down).
Collect both parts on a thread.
Glue the hairpin to the bow with a glue gun.
From a satin ribbon of one of the shades, cut a narrow strip to close the middle of the bow. Glue the strip.
Decorate the bow with a bead or other decor.
Option 2.
Cut a 5 cm wide ribbon into the following segments: 5x25 cm - 2 pcs, 5x21 cm and 5x13.5 cm.
Fold the longest pieces in half, shiny side down, and then turn over and connect the ends, secure with a pin.
Pass one ring through the second, forming a bow. Fasten with tailor's pins.
Take a cut middle length, bend in half, unbend. Bring the ends to the center on the back side. Fasten.
Bend the shortest part in half, cut the edge obliquely, singe the edges.
Glue rhinestones on the edges.
Gather the middle blank in the center with a thread with small stitches, pull it off, forming a bow, fix the thread.
Collect a small blank with rhinestones in the center with a thread. Tighten the thread without cutting it. On the same thread, collect the most big bow, pull, fix.
Use a glue gun to glue the remaining bow in the center.
Glue a hairpin or elastic band to the bow.
Close the center of the bow with a strip of satin ribbon of the same color.
Decorate the center however you like.
Bows from satin ribbons to school, step by step with a photo
Option 1.
Cut a satin ribbon 1.3 cm wide into segments 8 cm. Fold the segment in half, making a mark at the fold, unbend. Fold the right corner down and the left corner up.
Bring the ends together, bend to the center and singe.
Make 58 of these petals.
In the center of each petal, glue a half-bead with Moment "Crystal" glue.
On a round blank 3.5 cm in diameter made of foamiran or felt, glue a row of petals along the edge.
Turn the workpiece over and do the same on the other side in a checkerboard pattern.
Turn the part over and continue gluing the petals in a checkerboard pattern.
Glue a bead in the center.
Such a bow can be attached both to a hairpin and to an elastic band.
The bow is ready.
Option 2.
From two pieces of tape 21x4 cm we will make ears.
Bend the corner back, bring it to the center.
Let's wrap up. Secure with a pin or clothespin.
We will do the same procedure with the second segment.
From a ribbon of the same color we cut 2 segments with dimensions of 4x9 cm, and from a ribbon of a suitable tone, segments of 2.5x8 cm.
We impose a smaller segment on a large one in pairs. Cut it off at an angle. You should get 2 such details.
We sew in pairs of parts. 
We glue them together. Glue to an elastic band or hairpin.
We fuse together 2 segments of the same tapes with dimensions of 18x4 cm by singeing with an edge with a lighter.
We bend the segments in half, bend the ends to the center. We sew the workpiece in the center, forming a bow.
We collect the bow. We glue a large bow to the elastic first, and glue a small one on it.
We close the center of the bow with a narrow strip of satin ribbon and decorate with a beautiful middle.
White bows to school master class
To work, you will need a white ribbon 5 cm wide, glue gun, thread with a white needle, a piece of white felt and a white elastic band.
- Cut the tape into 10 cm lengths. You will need 17 of these in total.
- Take one cut. Bend the upper corner on the right side down, aligning it with the bottom, and then bend the same corner up. Secure with a pin.
- Fold the bottom left corner up and then down. Fix. In the same way, assemble the same part from the remaining 16 segments.
- Lay the part with the corners up and sew the 2 lower edges of the rhombus with large stitches, without tightening.
- Remove the pins, pull the thread. You should get a petal like in the picture. Do the same for the other 16 petals.
- We string 8 petals on one thread, sew. It should be a circle. Then we sew 2 more circles of 6 and 3 petals.
- Glue an elastic band onto a circle of felt 5 cm in diameter.
- Glue the felt blank first to a large circle of petals.
- Next, glue the middle circle of petals, and on top of the smallest.
- Glue the middle of a beautiful half-bead into the center and the bow is ready.
Beautiful bows to school, ideas with photos
Bows to school on September 1, step by step with a photo
Option 1.
For work you will need:
- 24 pieces of satin ribbon measuring 2.5x14 cm;
- 9 cuts nylon tape size 1x8 cm;
- glue gun;
- a blank of felt with a diameter of 3.5 cm;
- 1 elastic band or hairpin;
- scissors.
Take 1 piece of satin ribbon and tie it in the center with a loose knot. Bring the tips together, wrap in the middle, singe. Do the same for the rest of the satin ribbon.
Using the same principle, make 9 petals from a nylon ribbon.
On 1 piece of felt, starting from the edge, first glue the petals of a satin ribbon, and glue the petals of a nylon ribbon in the middle.
Glue an elastic band or hairpin to the back of the bow.
Option 2.
To create a bow you will need:
- 10 pieces of satin ribbon measuring 2.5x12 cm;
- 3 pieces of tape measuring 2.5x16 cm;
- 3 pieces of organza ribbon measuring 2.5x16 cm;
- glue gun;
- scissors;
- 2 beads;
- middle decoration.
5 pieces of 12 cm are stacked, aligned along the edges and folded in half.
We sew the middle with a thread. We tighten the thread, sew a bead on top.
We take the tip of the upper tape of one of the edges, we bring it forward. We impose each subsequent part of the tape on the previous one, aligning the tips along the edge. We fasten the bottom with a pin.
We do the same on the other side.
We turn the edges of the workpiece towards each other, and put the right edge on top of the left. We solder the ends with a lighter.
In the same way, make the second half of the bow, sew the halves together.
We fold one piece of tape 16 cm long in half, outline the middle. Turn the upper edge of the tape to the right and lower it down to the intended middle. Do the same with the bottom edge. Fix the center with a pin.
Fold the second tape 16 cm wide symmetrically, making curls to the left.
Fold the third ribbon 16 cm in length in half, unfold and bend the ends to the center.
We sew the details. The first two segments should be on top, and the third in the middle.
We pull the thread.
We sew bows together.
Fold all three pieces of organza in turn in half, unfold, bring the ends to the middle and fix.
Sew together in the center all the details of the organza bow, laying out 2 pieces on top and one on the bottom. We pull the thread.
Sew an organza bow to the rest, putting it under the bottom.
Glue an elastic band to the bow and beautiful decoration for the middle.
Videos school bow
Do-it-yourself ribbon bows to school
Option 1.
For one bow you will need 1.5 m of satin or rep ribbon 4 cm wide. The ribbon is not cut into segments.
- Finish the edge of the tape by singeing it with a lighter.
- Bend the edge of the tape by gluing it with Moment "Crystal" glue.
- We bend the rest of the tape symmetrically. Put both parts together.
- We string the petal on a needle and thread.
- For the same principle, we make the second petal. We sew.
- On one part of the bow we make 8 such petals.
- We make the second part of the bow in the same way and string it on the same thread on which the first half was strung. We sew both halves.
- Sew beads between the petals, turning each petal to the left.
- Sew the beads first to one half of the bow, and then to the second. Straighten the petals.
- Glue a beautiful middle to the bow, and an elastic band or hairpin on the back.
Option 2.
From cardboard, cut out a blank in the form of a bow 8 cm wide. Attach the blank to a shiny foamiran, cut out a bow.
Take a piece of tape measuring 4x16 cm, fold in half, then unfold. Turn the top edge of the tape to the right and lower it down to the intended middle, then do the same with the bottom edge. Sew the center. Pull off.
From 2 segments 4x20 cm we will make a simple bow. To do this, fold each segment in half, then unfold and fold the corners into the middle. Sew in the center. Collect both segments on the same thread, sew, fix.
First, glue a large bow on the elastic band, then a foamiran bow, and then small bow. Close the middle with a piece of foamiran.
We decorate the bow with rhinestones.
Option 3.
Gather 2 pieces of rep ribbon measuring 3.8x18 into a simple bow. To do this, fold the first segment in half, then straighten and bring the ends to the center, sew in the middle, pull the ends together. On the same thread, sew the second piece of tape, folded according to the same principle as the first, sew the pieces together.
2 pieces of rep tape measuring 2.5x10 cm, fold in half, cut off the ends. Lay the pieces crosswise, sew in the center, pull the thread.
2 x 2 pieces of different shades of rep ribbon measuring 2.5x18.5 cm, fold together, align the edges, singe, thereby soldering them together.
Fold the first soldered segment in half, unfold. Holding the tape in the middle, bend the right corner into the middle, then wrap the resulting triangle to the left. Bend the right tip first up, then bring it back, then bend the left tip up and back.
Bring both ends back, aligning them with the central corner. Secure the part with a pin. From the remaining soldered tape, make another of the same part.
Sew the first part with stitches, and sew the second part with stitches on the same thread. Sew them together.
We collect the bow. We glue a black one on a white bow, and on top of it with multi-colored glue.
We glue an elastic band and a beautiful center to the bow.
Option 4.
Take 30 pieces of white satin ribbon measuring 5x21 cm. On the first piece, find the middle and make 4 folds of an accordion 0.5 cm deep in it.
Option 5.
Prepare for work:
- 2 pieces 19x2.5 cm;
- segment 16x2.5 cm;
- 2 pieces 10x2.5 cm;
- rhinestones;
- glue gun;
- hairpin or rubber band.
From two sections bigger size let's form a simple bow: fold each of the segments in half, lay it out, bring the tips to the center, fix the middle. We sew the bows together.
From a segment 16 cm long, we will make a simple bow by folding it in half, bringing the ends together and sewing in the middle.
Glue the bow to the elastic, decorate the center with rhinestones.
Every schoolgirl on September 1 wants to look her best. Her mother is able to realize these dreams, because it is she who can make an exclusive bow for her daughter by the first call. How to make traditional active mom already wrote. And today we bring to your attention a master class on making a magnificent kanzashi school bow.
Necessary materials:
- white satin ribbon - 3 m;
- white chiffon ribbon - 1 m;
- white beads - 5 pcs.;
- a piece of light-colored felt;
- glue gun;
- candle;
- tweezers;
- scissors.
It is most convenient to first make all the blanks, and after that collect the bow.
Master class on making a kanzashi bow for September 1
Take a chiffon ribbon and cut it into 10 squares. You can measure an even square without a ruler. To do this, simply lean the end of the tape against one of its sides. Cut the ribbon along the length of its end.
So, we made 10 identical squares.
Now let's start making the first petal. Connect the opposite corners of the square to form a triangle.
Fold the 2 sharp corners of the triangle towards the third corner.
Fold the workpiece in half with the formed "loop" outward.
Trim the edge of the workpiece with scissors.
Now this edge needs to be singeed on a candle so that the tape does not crumble and stick together.
Do the same with the rest of the squares. As a result, we get 10 identical petals.
Now take a satin ribbon and cut 8 pieces 8 cm long each.
Fold a piece of tape in half right side out and make a neat diagonal cut.
Clamp the tape with tweezers and singe the cut edge.
Fold the piece of tape on the other side in half lengthwise with the wrong side out, and then fold the edges to the center. Burn off the tip of the candle.
We have a sharp petal. Make 7 more of the same.
Cut 8 pieces of satin ribbon 5 cm long.
Make exactly the same petals as in the case of eight-centimeter ribbons.
Cut 8 pieces of satin ribbon 15 cm long each.
Fold the piece of tape into a loop.
Trim the uneven edge and singe it.
Do the same with the rest of the pieces.
Now you need to make the base for the bow. Cut a circle about 5 cm in diameter from a piece of felt.
All the blanks for the kanzashi school bow are ready, you can begin to assemble the product. Using a hot glue gun, glue the chiffon petal to the edge of the felt circle.
Glue the rest of the chiffon petals in the same way.
Start gluing big satin petals over chiffon so that there is room in the center of the circle.
To glue the petals symmetrically, the next blank must be attached directly opposite the first. The next step will be easier to navigate.
Glue the remaining large petals.
Then start attaching small blanks.
Try to close the gaps between the large petals with them.
Turn the future bow over, glue the “loop” blank on the back side.
Also try to close the space between the large petals with these blanks.
Finally, decorate the center of the bow with a white bead. Distribute the rest of the beads on the bow in the places you like.
In order for a lush kanzashi bow to be woven into your hair, you need to attach a hairpin or elastic band to it.
First, strengthen the base of the bow and cover the attachment points of the "loops" blanks with another circle of felt.
Then glue the elastic to the bow with a glue gun and a piece of felt. Apply a lot of glue so that the gum holds well.
The master class was held by Margarita Vyacheslavovna
Photo of the author. Copying materials is prohibited
Hello dear friends! Here May is at the doorstep, which means that soon for thousands of graduates it will ring last call, and there, believe me, we will not have time to look back, as the summer has passed and we need to collect the children for school. As they say - prepare the sleigh in the summer, so I'm already getting ready, I'm making lush white kanzashi bows for the last call and for September 1. My daughter’s last call is still far away, because the first one hasn’t rang yet, but September 1 is just around the corner, and this year, God willing, we will go to first grade. I don't like haste, it unbalances me, so I try to have everything ready in advance.
I used to buy white bows for all kinds of holidays for my daughter in a store or in the market, but their quality was not very good, to put it mildly, I remember somehow I bought two lush bows, but we didn’t even have time to put them on, as one just fell apart when I I began to tie his daughter, it was very unpleasant, so I know for sure that it’s better to make elegant white bows from ribbons on September 1 or the last call with my own hands, it’s reliable, neat and with an investment of a part of myself.
White kanzashi bows for September 1
I have after making lush and elegant (they can also be used for school purposes, simply by making white from a ribbon) in kindergarten a white satin ribbon remained unused, with a silver edging, although I planned to use it then. Therefore, I decided to use it this time too, although I had to buy a few more meters to make two bows.
We will need:
- White ribbon 2.5 cm wide (I have a silver trim)
- A beautiful center for a bow (I have it consists of two parts - a metal base and a white semi-bead in the shape of a rose)
- Felt base with a diameter of 3.5 cm
- White hair bands
- Scissors
- Ruler
- Hot glue
- Tweezers
- Candle
We cut the ribbon into segments of 5-5.5 cm. If you want to make two bows, like mine, then immediately cut a lot of segments. We fold the piece of tape in half lengthwise so that the front side is inside. Then we bend the tape to the middle on one side and on the other, cut the tape a little at an angle in the direction of the long part, grabbing it with tweezers and melt it on the candle. It is we who have formed the upper part of the petal. 
Now, in the lower part, first on the left side we make a small fold and fix it on the candle. Similarly, on the right side, in the center of the petal, if you did everything right, a heart should form. At first glance, it may seem that the petal is complex, but until you try to make it, it slightly resembles the shape of the petal that we made when we made it, but nevertheless they have many differences. By the way, the petal that is shown in the rim can also make beautiful white bows.
When we made a lot of petals, for one flower they will need about 45-50 pieces. Now we take a felt base with a diameter of 3.5 cm and begin to stick the first row of white petals. I got 8 petals in the first row. We glue the second row between the petals of the first row, I also got 8 of them, so we continue to stick the third row, the number of petals in the rows can be different, more or less, it all depends on how you arrange the petals on the base.
In total, I got 4 rows in the bow, it was possible not to make any middle, but simply glue everything with petals, it would turn out such a bow with sharp petals, reminiscent of a kind of dahlia. But since I have already bought the middle, then let it be present in the bow. Since it consists of two parts, I first glued them together with hot glue, simply putting a white plastic flower smeared with glue into a metal base. And then we glue this already finished middle into the center of the bow, we do all this with the help of hot glue.
Next, you need to decide which mount you will have on the white kanzashi bows on September 1. I most often use hair ties, for the simple reason that my daughter has sparse hair, like mine, and hairpins with clips on them do not hold well, but the rubber bands are just that.
There are also many ways to attach an elastic band to a bow, but my method is the simplest, they cut off a piece of felt, a small strip and pasted it through the elastic band with hot glue on the bow. It turns out here is such an elegant ribbon bow that will decorate a child's head on any holiday, and not just in honor of September 1 or the last call.
For those who did not understand something from the photo, I propose to see everything clearly in the video lesson. I hope he helps you.
Video master class how to make a white bow on September 1
Festive ribbon bow 2.5 cm for the last call
I have long wanted to try to make a bow-ball, well, they are very similar to balls, and they also remind me of the flower of the bulldenezh bush, and you? For this holiday bow, I use the same 2.5 cm wide white ribbon with a silver trim. I already have beautiful flowers so you can take a look. I will again make two bows at once, so I bought 7 meters of ribbon, just this amount was enough for two lush bow-balls.
Materials and tools:
- White ribbon 2.5 cm wide
- Ruler
- Tweezers
- glue gun
- Scissors
- Felt base 3.5 cm in diameter
- Candle
- Elastic bands or clips (hairpins for attaching bows)
This holiday bow is made up of beautiful details similar to small flower. Making these parts is very simple and fast. Cut the ribbons into pieces of 10 cm in length. Again, the number of cuts depends on whether you decide to make one or two bows. One bow will take about 40 parts.
To form one part, we take one piece of tape 10 cm long and fold it in half across the front side should be inside. We heat up the glue gun and step back from the fold about 1 cm, apply a small drop of glue and fold the halves of the tape again. Then open the tape right side out. We connect the tape from two ends in half, thus forming a flower, and from the bottom we wind them one after another, grabbing them with tweezers and melt them on a candle. It turns out a nice detail for the future kanzashi bow.
At the next stage, we take a white felt base and glue the parts with hot glue, first two opposite each other, then two more, and then the parts between the already glued petals. There are 8 parts in the first row, 8 in the second row, then 6, and then we just fill the entire middle with parts so that there is no gap. For volume, I decided to stick the petals on the reverse side of the bow, I did it between the petals of the first row, but on the reverse side. In the video tutorial you will see it clearly.
Video master class ribbon bow 2.5 cm
At the last stage, as usual, we choose the mount, I will have rubber bands, I have not glued them yet, but I will do it soon, and you can see the method of gluing them in the bows above. These are the white bows that can be made on September 1 and I got it on the last call, I hope these two master classes will help someone dress up their princesses, let them be the most beautiful on the holiday!
With respect and love, Elena Kurbatova.
Traditional decoration for female students primary school is a bow. You can either buy it in the store, make it from the master, or make it yourself. Most of the festive bows for September 1 are now made by hand using the kanzashi technique - this is the creation of jewelry from fabric, flowers and hair clips from pieces of fabric folded in the form of flower petals.
DIY satin ribbon bow
Traditional for the Day of Knowledge is the white color of the bows.
For manufacturing we need:
- 15 pieces of satin ribbons measuring 21x5 cm;
- a circle of felt or ribbon with a diameter of 4 cm;
- half bead;
- scrunchy;
- tweezers;
- soldering iron;
- hot glue.
The creation of a bow takes place in several stages:
- From a piece of satin ribbon we make a petal, fold it in half with the front side inward, singe 1 cm in the upper corners.
After the edges of the petal are scorched, turn it inside out
- We fold the lower edge of the petal with an accordion and singe again. We make 15 such petals.
We hold the flower with tweezers so as not to get burned
- On a round base of felt or ribbon, glue 5 petals in a circle.
Hot glue applied to the edge of the base
- Glue the petals of the second row between the petals of the first.
Glue is applied to the tip of the petal, then firmly pressed to the base
- We glue the petals of the third row together, forming a camomile.
Glue the finished chamomile on top of the petals of the second row
- We decorate the middle of the flower with a half-bead.
In the center of the bow, you can place a beautiful button, bead or any other decorative detail.
- Glue the elastic to the flower and secure it with another piece of tape. An elegant bow is ready!
There are several options for attaching elastic bands or ties to bows.
From organza
Such a bow can become a decoration for a hairpin, elastic band or hoop.
To create an organza bow with an elastic band, you will need:
- styrofoam ball with a diameter of 7 cm, cut in half;
- pieces of organza to fit the base of the ball;
- circle of felt with a diameter of 9 cm;
- 87 squares of organza measuring 5 cm;
- beautiful button to decorate the bow;
- scrunchy;
- hot glue;
- lighter;
- sewing kit - scissors, threads, needles.
To get a beautiful lush bow, you need to do the following:
- We cover the foam plastic with organza in 2 layers: we sew it along the edge with a needle and thread, we insert the foam base inside.
We tighten the thread and fix it on the flat side of the foam
- Glue the foam base on the felt circle with the flat side.
We place the foam base in the center of the felt circle
- From organza squares we make 87 round petals in a fold.
We singe the edges of the petals with a lighter, cut off the irregularities with scissors
- Glue the petals to the base in a circle, placing them next to each other. Glue is applied to the protruding part of the felt and the side of the foam. The first row - 13 petals, the second - 15, the third - 13, the fourth - 12, the fifth - 10, the sixth - 9, the seventh - 7, the eighth - 5, the ninth - 3.
The petals of the new row are placed between the petals of the lower
- In the center of the foam we make a small indentation so that you can insert the leg of the button, apply hot glue and glue the middle. The bow is ready!
On the reverse side glue the elastic band for hair
From tulle
Such bows can be decorated with any rhinestones, beads, sequins
Necessary tools and materials:
- 42 squares of tulle measuring 7.5 cm;
- rhinestones with a diameter of 3 mm;
- glue "Moment";
- lighter;
- scrunchy;
- tweezers;
- scissors;
- toothpick;
- a square of satin ribbon measuring 5 cm;
- a rectangle of satin ribbon measuring 5x2 cm;
- a circle of felt or cardboard with a diameter of 4 cm.
Making a festive bow will not take much time:
- We fold the petals from the squares of tulle: each of two. We put them on top of each other so that the edges are offset, and make 3 folds.
Fix the base of the petals with glue
- Glue the rhinestones to one corner of the petals with a toothpick and glue. We make 21 petals in total.
It is necessary that all the petals look pocket in one direction
- To the base of felt or cardboard covered with satin, with an elastic band, glue the petals in a circle.
In the process of gluing, carefully straighten the petals
- We form 4 rows of petals. The first and second row - 7 petals each, the third - 5, the fourth - 2.
Glue the petals of the new row between the petals of the previous one.
- We straighten all the petals. The bow is ready!
The decoration of such bows depends only on the imagination of the master.
Patterned organza
Moiré is ideal for such bows.
To create an organza bow with a pattern, you will need:
- a piece of organza measuring 250x30 cm;
- circle of felt for the base;
- scrunchy;
- hot glue;
To make a bow, do the following:
How to make a satin ribbon flower bow
Required materials and tools:
- 6 pieces of satin ribbon measuring 14x5 cm;
- 6 - 10.5x2.5 cm;
- 6 pieces of silver (or other shiny) ribbon measuring 15x0.3 cm;
- 6 - 8x0.3 cm;
- a bead or any other decoration in the center of the bow;
- lighter;
- sewing kit - threads, needles, scissors.
Consider step by step process bow making:
- Pieces of satin ribbon 5 cm wide are folded in half and strung on a thread.
