home » School » How to crochet a big snowman. Crochet snowman - the most interesting thing on blogs

How to crochet a big snowman. Crochet snowman - the most interesting thing on blogs

We present a cute and fairly easy-to-knit toy that can be presented as a souvenir for the New Year. A cute crochet snowman in a hat and mittens will appeal to both adults and children, and will take its place of honor under the Christmas tree! To create such a bright snowman, you will need regular acrylic yarn. different colors and a suitable hook (2-2.5 mm).

The pattern of a knitted snowman was created based on the pattern of Asida. The snowman presented in the photo was knitted by the needlewoman Yana Lapa.

Crocheted snowman:
scheme and description of amigurumi toy

Materials:

Yarn "Children's novelty" 50gr/200m, 100% acrylic, hook 2.5 mm
A little Alize Softy for the hem of the hat
Safety eyelets or beads
Thick cardboard, tape
Beads and buttons for decoration
Scissors

Head
Row 1: 2 ch, in the second loop from the hook 6 sc
Row 2: in each loop 2 sc = 12
Row 3:
Row 4:
Row 5:
Row 6:
Row 7:
Row 8:
Row 9:
Row 10-12: 1 sc without increments
Row 13:
Row 14: 1 sc in each loop in a circle = 48
Row 15:
Row 16:
Row 17:
Row 18:
Row 19: every 3 and 4 loops knit together = 18
Row 20:
Row 21: decrease in each loop = 6
Fasten the thread, leaving a tail for sewing.
Insert eyes between 12 and 13 rows. Stuff the detail.

The body of a knitted snowman
Row 1: ch, in the second from the hook 6 sc
Row 2: in each loop 2 sc = 12
Row 3: in every 2nd loop 2sc = 18
Row 4: in every 3rd loop 2 sc = 24
Row 5: in every 4th loop 2 sc = 30
Row 6: in every 5th loop 2 sc = 36
Row 7: in every 6th loop 2 sc = 42
Row 8: in every 7th loop 2 sc = 48
Row 9: in every 8th loop 2 sc = 54
Row 10: in every 9th loop 2 sc = 60
Row 11: in every 10th loop 2 sc = 66
Row 12-16: 1 sc without increments = 66
Row 17: every 10 and 11 loops knit together = 60
Row 18: every 9 and 10 loops knit together = 54
Row 19: every 8 and 9 loops knit together = 48
Row 20: every 7 and 8 loops knit together = 42
Row 21: every 6 and 7 loops knit together = 36
Row 22: every 5 and 6 loops knit together = 30
Row 23: every 4 and 5 loops knit together = 24
Fill.
Row 24: every 3 and 4 loops knit together = 18
Row 25: every 2 and 3 loops knit together = 12
Row 26: decrease in each loop = 6
Pull the hole, fasten the thread and cut.

Mittens
Row 1: 2 ch, in the second loop from the hook we knit 6 sc = 6
Row 2: in each loop 2 sc = 12
Row 3-4: knit 1 sc in a circle = 12
Row 5: we knit 5 sbn and knit a magnificent column (this will be a finger on a mitten), then we knit another 6 sbn = 12
Row 6: every 3 and 4 loops knit together = 9
Row 7: we knit for the front wall of the loop: increases in each loop in a circle. It turns out the cuff of the mittens.
We change the thread to white and begin to knit the handle behind the back walls of the loops of the sixth row = 9
Remember to fasten the thread when switching from mitten to handle so that the knitting does not bloom later.
Row 8-16: 1 sc in a circle = 9
Row 17: every 2 and 3 loops knit together
Pull off (do not forget to stuff the handle before) and fasten the thread, cut and hide the ends.

legs
We prepare cardboard for the base of the feet, adhesive tape and scissors.
Row 1: we collect a chain of 6 ch, in the second loop from the hook we knit 3 sc, then in each loop one sc and in the last loop again 3 sc, and one sc in the next 3 loops = 12
Row 2: in the next three loops we knit 2 sbn, in the next three - one at a time, in the next three - again 2 sbn each, in the last three in this circle - one sbn each, it turns out an oval = 18
Row 3: in the next 6 loops, alternating, knit 2 sc, 1 sc (3 times), knit one sc in the next three loops, repeat the alternation of 2 sc, 1 sc (3 times) in the next six loops; in the next three loops we knit one sc = 24
Row 4: in the next nine loops we knit 1 sbn, 2 sbn, 1 sbn (3 times), we knit the next three loops one sbn; in the next nine loops, knit 1 sc, 2 sc, 1 sc (3 times); in the next three loops we knit one sc = 30
Row 5: we knit without increments in a circle 30 sc for the back walls of the loops = 30
Row 6: again in a circle without increments for both walls of the loops = 30
Row 7: 7 decreases in a row, 5 sbn one by one we knit and three decreases on the heel, and 5 sbn we knit further.
Now we cut out an oval according to the size of the sole from the cardboard, try it on inside the boot. If it doesn't fit, cut or remake.
It is necessary that the cardboard is perfect - the size is in size, otherwise it will stick out, or it will move out and the snowman will not be stable. Happened? Great, immediately cut out another piece of cardboard and glue it neatly with tape and put it in the shoe.
Row 8: three decreases and knit to the heel, one sc, fasten the thread. We stuff.

carrot nose
Row 1: 2 ch in the second from the hook 6 sc
Row 2: one sc = 6
Row 3: in every 3rd loop 2 sc = 9
Row 4-5: one at a time without increments = 9
Row 6: in every 4th loop 2 sc = 11
You can make the nose shorter or longer as you wish.
Fasten the thread, leave a tail for sewing.

Sew the head and body with holes to each other. Sew on arms and legs. Embroider a smile.

Scarf knitted from right to left, each time in a new color. Pick up a chain from ch, at the end, fasten the thread and cut it off. And on the new right, a new row with a new color. It turns out beautifully - on the one hand, the front rows, on the other - the wrong side.

Beanie
Choose the color of the hat and its stripes at your discretion.
Row 1: Pick a chain from air loops and connect, so that you get 56 loops. Try on the snowman, if necessary, decrease or add 1 loop.
Row 2-8: knit 1 sc in a circle
Row 9: every 8 and 9 loops we knit together
Row 10: knit 1 sc in a circle
Row 11: every 7 and 8 loops we knit together
Row 12: knit 1 sc in a circle
Row 13: every 6 and 7 loops we knit together
Row 14: every 5 and 6 loops we knit together
Row 15: every 4 and 5 loops we knit together
Row 16: every 3 and 4 loops we knit together
Row 17: every 2 and 3 loops we knit together
Row 18: decrease in each loop, pull off the loops
Make a pom pom and sew on to the hat.

We dress a knitted snowman and the toy is ready!

If you have any questions about the crochet snowman pattern, write them in the comments to the post! All the best in your preparations for the New Year!

DIY Christmas crafts - the best decoration holiday. And what could be more fun than such a fairy-tale hero as a snowman?

Crocheted in skillful hands, you can tie an unusually cute and funny snowman, which can not only decorate festive table, but also become great gift loved ones or even a child's favorite toy!

To crochet a toy like a snowman, you need to be patient, with materials, tools and arm yourself with our tips:

Before you start creating, it would be nice to read a master class or watch a video tutorial on crocheting a snowman.
Threads are better to buy woolen or cotton. You can use the leftover threads from the previous knitting. One snowman takes 30-50 grams of thread. Crochet hooks are desirable to have different sizes. The hook should always match the thickness of the thread.
Sometimes you may need knitting needles, for example, for knitting a scarf.
Beads, buttons, glass beads will be needed for the eyes and eyebrows.
It is best to knit a snowman according to the scheme, which can be found in master classes or videos.
If you decide to give your loved ones such a surprise as, then it can be beautifully decorated with crocheted details.

The process of crocheting a snowman is based on general principle. A snowman always consists of two or three balls, which are his torso and head. If you know how to knit a ball, then you can easily knit a snowman. For beginner needlewomen, a master class or a video lesson on crocheting a ball will be of great help.

We offer you several master classes in which you will find detailed description knitting algorithm New Year's snowmen crochet.

We invite you to knit together with us a funny snowman, which you can hang on the Christmas tree, give to friends or decorate their house.

You will need: red, green and light golden threads, a hook, two balls of different sizes, a needle and thread, PVA glue and a brush, paper, black beads and glass beads.

Step one: tie two balls with golden threads. This will be the body and head of the snowman.

Step two: we firmly connect the torso and head, for which we thread the tip of the thread from the torso blank into the penultimate row of the head blank, tighten it and tie it into a knot.

Step three: knit a red scarf with knitting needles.

Step four: we make a nose out of paper and wrap it with a red thread, attaching it with glue, as shown in the diagram.

Step five: we knit a green hat, and from beads and glass beads we make eyes and eyebrows.

Step six: we attach the nose with a needle and thread and pull a golden lace through the tip of the cap.

Snowman in a hat - master class

For needlewomen who know the technique of crocheting, creating such a snowman according to the scheme will not be difficult.

You will need: white, orange, brown and black woolen threads, crochet hook.

We knit a ball (lower part of the body), but not to the end, but on 12-18 columns in a row we begin to knit the next smaller ball (upper part of the body). By the same principle, we knit the third ball (head).
We knit small balls separately - these will be handles.
We stuff the snowman with padding polyester or cotton wool. For stability, you can put plastic balls or pebbles on the bottom.
We knit a hat from black threads and a nose from red ones. Then we embroider the mouth and eyes.

Heating pad on a mug - master class

Snowman, knitted with thin knitting needles and crocheted, as a heating pad for a mug - albeit small, but important detail for comfort in the house.

You will need: blue and white yarn, orange Iris threads, hook No. 1.5, knitting needles, synthetic winterizer and beads.

First, we knit the head: with a white thread on the knitting needles, we collect 20 loops and knit stockinette stitch, adding in 3 and 5 rows of 10 loops. Having connected the 22nd row, fill the resulting part with a padding polyester. Then in the 23rd, 25th and 27th row add 10 loops again (total there will be 70 loops in the row). On the 120th row close the loops. Run a seam, wrap the edges inward, hem at neck level and tighten slightly.
We knit a hat: we collect 38 loops and we knit a garter stitch for 32 rows and close the loops. We carry out a seam, we tighten the crown, we make a white pompom and sew.
We knit a scarf: with blue threads we collect 8 loops and we knit about 100 rows.
We make a nose: we take an orange thread and crochet 3 air loops, connect them into a ring and knit the first row of 5 tbsp. b / n, 2-8 rows of art. b / n, adding 1 loop. Stuff the nose with padding polyester and sew to the head. Then sew on the beady eyes as shown in the diagram. Crocheted and knitted snowman is ready.

Knitted snowman on a postcard - master class

Even novice craftswomen will be able to knit such a cheerful character, which is great for decorating a New Year's video card or decorating a Christmas tree.

You will need: woolen or cotton threads in red, white, black and orange, a hook, four buttons, two beads and floss threads.

We knit two mugs different sizes. Beginning needlewomen can find a description of knitting circles in master classes or video lessons.
We knit a hat, nose and scarf, sew on buttons, make eyes and dimples on the cheeks, embroider a smile and snowflakes with floss threads. Then we sew all the details according to the scheme.

Ideas for creating New Year's snowmen

Shaggy yarn can make a fun fluffy family.

Original potholders in the form of a couple of funny snowmen will decorate your kitchen.

Having studied the master class and video tutorials on crocheting, you can easily knit an athlete snowman.

A cheerful snowman will have a wonderful company, a green Christmas tree crocheted.

A cute gift will be a mobile phone case decorated with a snowman.

And such New Year's tack even a novice craftswoman will knit.

A little patience, skill and imagination will help you create unique images of New Year's snowmen. We hope that our workshops and ideas were interesting and informative for you. You can easily peep the missing little things in the video knitting lessons.

If you are a beginner needlewoman and are looking for a new way to create designer gifts, pay attention to the crochet technique. To make a voluminous souvenir, you only need one tool and multi-colored yarn. Follow the instructions below and you will have a cute knitted snowman. The hook allows you to create original voluminous toys quickly and easily. Choose the method you like, remember the principle of work and create your own exclusive gifts and souvenirs.

Bulky crochet

If you have already been interested in this needlework technique, then most likely you have seen both schemes and finished products. Many are fond of making napkins, clothing items, but voluminous things are no less spectacular, crocheted. In this way, both flat products with a relief surface and fully three-dimensional objects are made. Ornaments from three-dimensional flowers, textured scarves and home decor look original. Very cute and unusual looking Stuffed Toys, beads and other accessories and souvenirs. A cute winter character - a knitted snowman - will definitely take a worthy place in your home. A crochet hook and a few multi-colored skeins of yarn is all you need to make it, and, of course, some free time. Explore several options for making a souvenir and knit your own unique character using the chosen technique.

What will be required

You need to prepare the following to make a beautiful knitted snowman:

hook;
yarn white color;
threads of a different shade, which is necessary to create decorative elements (orange for a carrot nose, blue for a scarf and a hat, black for wand pens and eyes);
filler (synthetic winterizer, holofiber, foam rubber, cotton wool);
a needle with a large eye for stitching elements.

It should be borne in mind that the thickness (number) of the working tool must correspond to the yarn. For small items, they should be thin. Details of the face - for example, eyes - are easy to embroider, but you can glue ready-made plastic ones. Especially good options with a secure mount on the washer. They are installed before the toy is filled. From the inside, a “ring” is fixed on the plastic leg, which can no longer be removed. Thus, for example, a baby, playing with your product, will no longer be able to take his eyes or nose off.

Manufacturing methods

So, you need a knitted snowman. The hook allows you to create such a character in two ways:

Whole product.
Separate elements with their subsequent stitching.

We are talking, of course, about creating the character's torso directly. By the way, your character can also look different. The traditional version is of three balls, going from the largest to the smallest from the bottom up. A good souvenir will turn out from two parts. In addition, snowmen are also made from elongated "sausages". Such a detail can be used as a head. This option will look unusual and fun.

Execution sequence

Whatever knitting method you choose, you need to work on making a souvenir toy like this:

Tie the required number of white balls (individually or as one whole torso) to the unfinished top.
Fill the details with padding polyester or other prepared material.
Decrease loops and complete your white spheres.
Embroider or fasten already prepared eyes, nose, buttons.
Tie additional details of the snowman (handles, legs) and decor
Connect all the elements into a single whole.

The souvenir is ready. If necessary, attach a pendant to the product so that it can be used as a key ring or hung on a Christmas tree.

How to crochet a snowman (option 1)

In the first case, a method for making a figurine from two elements in one piece is considered. The sequence of work is as follows:

Dial two air loops from white yarn.
Single crochet 6 into the second chain stitch.
Make a connecting column.
In the second row, make six increases, that is, in each loop of the previous row you need to knit two single crochets. As a result, you will get 12 columns.
The third row is performed according to the principle of the previous one, when two columns are knitted into each loop. You get 24 columns.
In the fourth row, make 6 additions, that is, you knit 4 columns, then an increase (two columns in one loop of the previous row), again 4 columns and then until the end of the row in the same sequence.
Knit three rows (30 stitches each) without adding.
In the next row, you need to perform 6 decreases according to the principle of step number 6, but instead of knitting an additional column in one loop, you need to skip the loop of the previous row. The result is again 24 columns in a row.
Perform also 6 decreases in the next row up to 18.
Fill the resulting element with synthetic winterizer and continue to work.
Add 6 columns (it will be 24).
Add 6 more columns (up to 30).
Knit three rows of 30 stitches.
In each of the following rows, perform 6 decreases.
Do not forget to fill the ball with padding polyester.
When there are 6 loops left, just pull them off and fasten the thread.

So, you have learned how to crochet a snowman with a single thread, when subsequent stitching of white balls is not required. If you want to make a souvenir of three parts, just do not complete the second sphere, but continue to work, first by adding a few loops in a row, and then, after knitting several rows, decrease the loops in the same amount and complete the product, not forgetting to pre-fill with padding polyester . If you want the balls to be the same, use the same number of loops as in the previous two. If you want to get a small head, add fewer loops and make fewer rows accordingly.

Knitting a snowman: method 2

Volumetric crochet can be done not from one thread, but by creating separate elements and then sewing them together. In the case of our character, the scheme of work will be similar to the previous one, with the only difference being that after step number 10 (filling with synthetic winterizer), you need to perform not an increase, but again a decrease until the ball is completed. The second and third balls are easy to knit in the same way (all three parts will be the same size), and then sew them into a snowman. Similarly, balls of different diameters are knitted.

Amigurumi

If you want crochet miniature snowmen, the patterns will be slightly different. This will require a thin hook and yarn, and increases and decreases will occur more slowly. And there can be more loops and rows. If you compare with the diagram above, then when you have 12 columns in a row, the next increase is performed up to 18, then up to 24, then up to 30, 36, 42. Then you make 8 rows of 42 columns. The reduction occurs in the same way.

How to tie additional details

When we crochet a snowman, it is worth remembering that we are creating not just a lifeless thing, but a toy, a character that should convey some kind of emotion, create a cheerful mood. This is possible thanks to the decorations and decorations used.

Volumetric handles can be connected according to the following scheme:

Cast on 2 air loops.
Do 6 single crochets in the second loop.
Close with a connecting column.
In the second row, make two increases (you get 8 loops).
Knit 7 rows.

If you want to get handles in mittens, start with yarn in a contrasting color, and after completing two rows of 8 loops, change the thread to white and knit another five rows with it. The second handle is knitted in the same way. A carrot nose is easy to make according to the same scheme, with the only difference being that in step number 4, not two increases are performed, but four.

The scarf is easily knitted from a chain of air loops and one row of double crochets. The length is up to you. The hat can be made with double crochets, starting with a ring of 25 or 30 stitches, knitting the first row and gradually decreasing 4 stitches in each subsequent row.

As you can see, crocheting a snowman for beginners is not such an impossible task. Everything is knitted very simply. It is enough to master the simplest loops and understand the principle of creating a shape by increasing and decreasing. By learning the basic techniques, you can make beautiful souvenir any complexity.

is a fascinating knitting process that will delight you at the end with a charming winter handsome man. You can keep it for yourself or give it to one of your colleagues on New Year. The height of the snowman is 14 cm.

For work you will need:

Yarn Vita baby Print (100% acrylic; 100g - 400m);
Yarn Vita baby of blue color(100% acrylic; 100g - 400m);
Yarn Pekhorka Children's novelty white (100% acrylic; 50g - 200m);
Hook 2.0 mm and 1.0 mm.

The first part of the video tutorial on crocheting the head and body of a snowman:

We knit the body and head of the snowman

We knit with white yarn.

1 row: in the middle of the loop (ring) we knit six RLS, SS;
4th row: *inc, 2 sc* (24 sts);
7 row: * addition, 5 sc * (42 p);
8-13 row: RLS (42 p);
14 row: * decrease, 5 sc * (36 p);
15 row: * decrease, 4 sc * (30 p);
16 row: * decrease, 3 sc * (24 p);
17 row: * decrease, 2 sc * (18 p);
18 - 19 row: RLS (18 p);
20 row: * addition, 2 sc * (24 p);
21 row: * addition, 3SBN * (30 p);
22 row: * addition, 4 sc * (36 p);
23 row: * addition, 5 sc * (42 p);
24 row: * addition, 6 sc * (48p);
25 - 39 row: RLS (48 p);
40 row: * decrease, 6 sc * (42 p);
41 row: * decrease, 5 sc * (36 p);
42 row: * decrease, 4 sc * (30 p); Fill the body of the snowman with filler and add more synthetic winterizer as you knit.
43 row: * decrease, 3SBN * (24 p);
44 row: * decrease, 2 sc * (18 p);
45 row: * decrease, 1 RLS * (12 p);
46 row: * decrease * until the hole closes. We fix and cut the thread.

The second part of the video tutorial on crocheting a scarf and a snowman hat:

We knit a scarf for a snowman

We collect 60 VP, printed yarn. We knit 2 rows with half-columns with a crochet. We tie the entire scarf with RLS, with a different color of yarn (blue). We cut the yarn, about 7-10 cm long and tie the fringe to the edges. We level with scissors.

We knit a hat for a snowman

Knitted with printed yarn.

1 row: Six sc are knitted into the ring, tighten;
2 row: from one loop we knit 2 sc (12 p);
3 row: * addition, 1 sc * (18 p);
4 row: * addition, 2 sc * (24 p);
5 row: * addition, 3 sc * (30 p);
6 row: * addition, 4 sc * (36 p);
7 row: (blue yarn) Sc for the back half loop (36 p);
8 - 13 row: (blue yarn) we knit for two half loops of RLS (36 p);
14 row: (printed yarn) * increase, 5 sc * knit for the back half loop (42 p);
15 row: (printed yarn) * increase, 6 RLS * knit in two half loops (48 p);
16 row: (printed yarn) * increase, 7 sc * (52 p).

We tie the edge of the cap with a crusty step, blue yarn. We tighten the thread and cut.

The third part of the video is a master class on crocheting handles in mittens, boots and a carrot nose for a snowman:

We knit a nose-carrot

We knit with orange yarn and crochet 1 mm.

1 row: we collect 2 VP, in the second loop we knit 4 sc;
2 row: RLS (4 p);
3rd row: *inc, 3 sc* (5 sts);
4 row: RLS (5 p);
5th row: *inc, 4 sc (6 sts).

We knit shoes

We knit with blue yarn.

1 row: in the ring we knit six sc. We tighten the ring.
2nd row: double the loops, knit 2 sc from one;
3 row: * RLS, addition * (18 p);
4 row: * 2 sc, increase * (24 p);
5 row: * 3 sc, increase * (30 p);
6 row: * 3 sc, decrease * (24 p);
7 row: * 2 sc, decrease * (18 p);
8 row: * 1 sc, decrease * (12 p). We fill one side of the boot with synthetic winterizer, for the stability of the snowman.
9 row: * decrease * until the hole closes.

We knit hands in mittens

We knit a mitten with printed yarn.

1 row: in the ring we knit 1 VP (it is equal to one RLS) and five RLS. We tighten the ring.
2 row: in one loop we knit 2 sc (12 p);
3 - 4 row: RLS (12 p);
5th row: 5 sc, 1 fluffy column (this will be the thumb), 6 sc;
6 row: * 2 sc, decrease * (9 p);
7 row: we knit for the front half-loop, in each 2 sc. This will be the lapel of the mittens.

Now we knit a hand with white yarn. We still have the back half loops of the 7th row, in which we begin knitting.

We knit RLS in each back half loop (9 p). Then we knit in a circle, in each loop one sc, a total of 7 rows. Do not forget to fill a mitten with a hand with a padding polyester. And with the last row, close the loops with decreases.

Now it remains only to sew on the nose, hands, buttons. Eyes can be glued or sewn on beads. Sew the boots with the flat side to the bottom of the snowman. Ready!

Store-bought gifts are never the same as handmade ones. Knitted toys, souvenirs will be original, funny, keeping the warmth of your hands. It is better for beginner craftswomen to start with simple options toys. For example, a knitted snowman with knitting needles, the master class offered in this article does not require much experience.

snowman

The size of the finished snowman is 18.5 cm.

Necessary materials:

yarn - synthetics such as acrylic, about 30-40g, white;
a little colored yarn - any two colors;
a set of straight knitting needles No. 2-2.5;
beads for the eyes;
synthetic winterizer or other filler - about 25g;
a needle with a large eye.

Patterns used:

front surface: when knitting in a circle - all loops are facial. With direct knitting - we alternate the front rows with the wrong ones;
garter stitch: knit all rows;
gum: * 1 l., 1 out. * - repeat until the end of the river.

Description of work

Head and body of a snowman

Dial 18p. white yarn. If the threads are thin - knit in two additions.
1r .: 18 face;
2p.: * 2l., 1 yarn * - repeat from * to * 6 times. Total 24p.;
3r.: 24 l. We knit the yarn over of the previous row with a crossed loop so that there is no hole.

3, 5, 7, 9 p.: - facial;
4p.: * 3 l., 1 yarn over * - repeat from * to * 6 times. Total 30p.;
6r.: * 4l., 1 yarn over * - repeat from * to * 6 times. Total 36p.;
8r.: * 5l., 1 yarn over * - repeat from * to * 6 times. Total 42p.;
from the 10th to the 39th: 42 persons;
40r.: * 4l., from 2p. -1 l. * - repeat from * to * 6r. We have 36p.;
From the 41st to the 60th: 36 persons;
61r.: * 3l., from 2p. -1 l. * - repeat from * to * 6r. We have 30p.;
62r.: * 2l., from 2p. -1 l. * - repeat from * to * 6r. We have 24p.;
63r.: * 1l., from 2p. -1 l. * - repeat from * to * 6r. We have 18p.;
64r.: * from 2p. -1 l. * - repeat from * to * 6r. We have 12p.

We tighten the remaining loops. Fill the body with filler: the bottom is tight, and in the “waist” area (40 row) - weakly. In this place, tighten with a thread (see the master class in the photo). Tighten the bottom, top and "waist" tightly.

Pens

These details can be knitted with an even cloth and sewn, folded in half, or can be knitted in one piece.
Dial 6p.
From the 1st to the 26th: * 1l., 1p. remove, without knitting, the thread at work * - from * to * - to the end of the row three times.
Close loops. Tie the other hand in the same way.

Mittens

Dial 12p. colored yarn, then go to circular knitting, distributing the loops on 3 knitting needles.
1.2r .: 12 persons;
3.5 p.: 12 purl;
4r. and from the 6th to the 13th: 12 persons;
14r.: * 2l., from 2p. -1 person. * - repeat three times. On the needle 9p.;
15r.: * 1l., from 2p. -1 person. * - repeat three times. On the needle 6p.;
16r.: * from 2p. -1 person. * - repeat three times. On the needle 3p.

Pull off the loops. For a finger, dial 3p. and knit 3p. garter stitch. Close the loops by knitting 3p. one. Fold in half and sew along the front side. Sew a finger for out. near. - see the master class diagrams in the photo. Fill the mittens not tightly with filler and sew to the hands.

Nose

Cast on 6 sts for nose. orange yarn and knit in a circle on 3 knitting needles.
From the 1st to the 5th p.: 6 persons;
6p.: * from 2p. - one front * - three times.
Pull off the loops.

Building a snowman

Sew on handles - see master class diagrams in the photo. If you want your hands not to hang, but to spring, insert a thin wire into them. Then we proceed to the design of the face. Sew on the nose, eyes (they can be glued). Embroider the mouth with red thread. To make our knitted funny snowman with knitting needles ruddy, you can draw cheeks with a red pencil or lipstick.

boots

Knitted boots are best made from white yarn, but if desired, they can be made the other way around - bright, matching the color of the cap.

Dial 6p. and mark the middle of the row.
1, 2 rows: garter stitch;
3 rows: 1 cr., 1 crochet, 4 sheets, 1 n., 1 cr. Only 8p .;
4p .: 8 persons .;
5 rows: 1 cr., 1 crochet, 6 sheets, 1 n., 1 cr. Only 10p.;
From the 6th to the 23rd: garter stitch.

Then, on the side of the work, cast on 16 loops - to the marked middle of the 1st row. (see master class in the photo). On the second side also dial 16p. You should get only 42p.: 16p + 10p + 16p = 42 loops (see the distribution on the knitting needles - photo master class).

Next, knitted shoes are performed according to the description:
1 row: 42 out;
2p .: 42 persons .;
3rd row: 42 out;
From the 4th to the 6th p.: 42l.;
7r.: 16 persons., * from 2 persons. -1 person. * -5 times, 16 persons. We have 37p.;
8, 10, 12, 14 rubles: facial;
9r.: 12 persons., * from 2 persons. -1 person. * -3 times, 1 person., * from 2 persons. -1 person. * -3 times, 12 persons., We have 31p .;
11r .: 9 persons., * from 2k. -1l. * -3 times, 1l., * out of 2l. -1l. * -3 times, 9 persons., We have 25p.;
13 rubles: 6 liters, * from 2 liters. -1l. * -3 times, 1l., * out of 2l. -1l. * -3 times, 6 l., We have 19p.

Close loops. We perform the second knitted boot in the same way, using a master class. We fill both with filler, sew to the body.

Beret

The headpiece can be knitted in a round or straight fabric and then sewn. In our description, we will consider the second option.

Cast on 42p. red yarn.
from the 1st to the 4th p.: 1 cr., gum 1lx1 out., 1 cr.

Change the yarn color to white.
5r.: 1kr., * 1l., 1n. * -from * to * - repeat to the end of the row, 1kr.;
6r .: out .;
from the 7th to the 24th row: the front surface;
25,27,29 rubles: 1 cr., * out of 2p. -1l. * - from * to * - knit to the end of the row, 1 cr.;
26, 28, 30 rubles: - purl.

Pull off the loops and sew the beret. Make a pom pom and sew it on. Master class on manufacturing beautiful pompom can be viewed on our website.

Scarf

We knit a knitted scarf from yarn of any color with a garter stitch. We collect 6p. and knit 40cm. We close the loops.

We put on a beret, fix it on the head in several places. We tie a scarf. Knitted cheerful snowman is ready!