A real mother always cares about the comfort and health of her baby. The child will definitely be interested bright shoes but it should still be soft and warm. We advise you to read our master class on knitting booties in the form of fluffy bunnies. We warn you that the shoes are designed for a baby aged 3-4 years.

For work you will need to prepare:

• hook;
• cardboard;
• a needle;
• scissors;
• suitable yarn.

Obviously, the choice between brown and pink should be made depending on whether you crochet Bunny booties for your daughter or son. White color will be universal for any gender.

Detailed job description

First of all, you need to tie the sole. This can be done based on an extremely understandable scheme:

A thread of pink or Brown dial a chain of 25 loops (air). Knit as shown in the picture above.

We proceed to the rise and toe. For this we take white thread(universal for boy and girl booties) and knit with single crochets in a circular pattern for five rows. We proceed to create a toe according to the following scheme:

To do this, we continue to knit, gradually removing the columns from the side of the toe. Everything, we managed to tie the booties themselves. Cut the thread with scissors.

Since our booties will be decorated in the form of bunnies, we need to add a ponytail and ears.

We take a thread of brown or red color, we collect a chain of 11 loops (again air). You need to knit them according to such a simple scheme:

• Air loop (lift).
• Single crochet (St.b \ n) - nine pieces in each loop.
• Tenth loop - 5 double crochets.

On the second side, you also need to knit 9 st. We take a white thread. Next, you need to tie the resulting product with double crochets: 9 - in each loop, 2 in the top 5 loops and again 9 - in each.

We repeat all the operations 3 more times to tie all the ears that will need to be sewn to the toe.

Not all kids like to dress up, but if the clothes will remind funny toy, then the process will become more pleasant. We offer you a master class that will help you knit bunny booties. This shoe is perfect for newborns.

You will need yarn in two contrasting colors. Pink and white for girls, and blue and light gray for boys. Choose the composition of the yarn based on the time of year. For summer and spring, cotton, viscose or silk is suitable. For cold weather - wool, acrylic or mohair. In this case, the thread is mixed (50% wool, 50% acrylic). You will need a set of knitting needles that match the size of the yarn.

Beginning of work

The length of the foot is 13 cm. Be guided by the length of the child's legs. Try on booties while knitting, or work from exact measurements.

Conventions in the lesson

• facial loop - LP;
• purl loop - IP.

Follow the master class detailed description. Start with the sole with the main color yarn. Cast on five stitches on the needles. In the first row, perform LP, and in the second row, make additions. To do this, from the second and fourth loops, perform two units each. Insert the needle behind the front wall, pull up the loop, and again into this loop behind the back wall. Perform the rest of the loops as PI.

There are seven stitches on the needle. Then knit with the following technique:

1. In the third row LP.
2. Knit the fourth as the second, and get 9 loops on the needles.
3. In the fifth row of LP, and the sixth as the second, and you will get 11 loops on the knitting needles.
4. From rows 7 to 19, knit with front stitch straight, that is, without additions.
5. 20th row as the second. Make two additions, and you get 13 loops.
6. From 21 to 29 row - facial surface.
7. 30th row - knit the first and second stitch together with PI, then all the loops of the PI, the penultimate and last loop together with the PI.
8. 31st - LP.
9. 32 as the thirtieth.
10. 33 row - LP.

Then in each even row, decrease at the beginning and at the end of the row, and on odd rows, knit RS until 5 loops remain.

Close the loops, the sole of the bunny is ready.

Switch to threads of a different shade, and tie the cloves. Cast on 16 sts on the sides of the sole, 6 sts on the toe, and 8 sts on the heel:

1. The first row is all IP.
2. 2nd row - two loops together PI, yarn over, again two loops together PI and so on each knitting needle. This simple circuit to form teeth.
3. 3rd row and 4th row-IP.

On the front side of the product, attach the thread of the main color, and knit 5 rows.

Proceed to the formation of part of the toe booties. Work on a five-stitch needle. Knit all loops from the LP needle, transfer the fifth loop to the knitting needle adjacent to the left, and throw the first loop on the one that was transferred. Return the resulting loop to the knitting needle. Knit the next row with PI, and with the last loop, do the same as in the previous row. As a result, the loops on the sides are reduced. Continue dec until 6 and 7 sts remain on side needles.

Tie two rows of IP. Work on the inside of the canvas. Then work 5 rows in 1x1 Rib, and 10 rows of LP. Switch to another color yarn and work 4 rows. In the first, perform the LP, in the second PI, the third LP, and the fourth row of the PI.

With yarn of the main shade, two rows of LP, then 4 rows with another shade, alternating a row of LP, and a row of PI. Close the loops and make a lapel.

To sew the teeth, turn the booties inside out, and sew the top seams to the bottom seams, as shown in the photo.

When a baby appears in the house, you really want him to have all the best and most beautiful. Children's things are very cute and bright. One of these charming little things is booties, especially knitted ones. Needlewomen not only use interesting various patterns to create them, but also give them the shape of some animals or decorate them with flowers and berries. One of the options is bunny booties, which have funny ears and imitate a hare muzzle.

We will consider a master class on their knitting in this article. In addition, knitted "slippers" are very soft. They are easy to put on on small legs and do not cause any inconvenience to the baby. Do not forget to use the provided diagrams and videos in your work to better understand the process.

Photo master class knitting booties

Required accessories

So, in order to knit booties in the shape of bunnies for the age of 6 to 12 months, using the master class proposed here, you will need:

• Children's acrylic yarn in two shades. In this case, it is white for decoration and pink as the main one. But you can take any others you like.
• We will knit with the knitting needles of the third number on the fishing line.
• You can also use knitting markers.
• Needle for stitching the finished product.
• Scheme, as well as a video to study the process.

Progress

We begin the lesson, which can also be used for knitting ordinary booties, if you do not complete the part about the ears.

1. Using pink yarn, cast on 43 stitches.
2. We remove the first edge and we knit all the rest with the front ones, and the last one with the wrong side.
3. Next, we will knit six more rows, making an increase in elements in certain places by knitting a loop from the broach of the previous row.
4. In the second - an addition after the first, after 20 loops, mark 1 element after the increase with a marker, add again, 20 loops, an increase and the last loop.
5. We knit the rows in the front way, with the exception of the last element, which is always purl.
6. The third, fifth and seventh are knitted without increments.
7. In the fourth, we increase the number of loops after the edge, after 21, then after 3 and after 21. As a result, 51 loops should form.
8. In the sixth - after the first, after 22, after five, after 22. Thus, we tied the foot of the future bootie.
   
9. We add a white thread to the work without cutting the main thread. We perform 4 rows of stocking knitting (11 in total), and in the twelfth we alternate 2 together with a crochet.
10. The thirteenth and fifteenth are purl, and the fourteenth is the front.
11. Now we cut the thread and tie it to the main thread. Fold everything knitted in white in half. Thus, bunny booties get a frill with a scalloped edge.
    
12. Next in the work is the main color. If you look at the canvas from the inside, then on the pink color at the point of attachment of another thread you can see a “line” of white arcs.
13. We will knit, grabbing a white loop from the knitting needle and an arc from the “line”. To do this, first we move the element from the left knitting needle to the right, grab the arc and place it on the left, return the previously removed one there and knit them together in the front way. We do this to the end, after which we knit a row of purl loops.
    
14. Now you need to work 8 rows of stocking knitting and divide all loops into three groups. There should be 11 in the center, and 22 on the sides.
    
15. The boundaries of the parts are marked with markers. We knit 22 loops, and then 10 from the second group and the eleventh we combine with the first of the third group (for the front half).
16. We turn knitting and work further only with middle group performing each time 11th along with the first. We do this until there are 13 elements left in the side parts.
17. Having reduced the number of loops for the last time, we simply knit the rest so that the entire fabric is on one knitting needle and we knit the faces. and out. row. Bunny booties have a top.
    
18. The master class moves on to the next stage. And now we will perform 7 rows with a 1x1 elastic band.
19. Having finished, we turn the work over to the inside and work in the stocking way as much as there was an elastic band.
20. Turning the knitting to the outside, we make the front row. And then from the inside we continue stocking knitting the same amount.
    
21. When finished, turn over and attach the finishing thread, which we knit 4 purl rows.
22. We change to the main color, without cutting off the previous one, and perform the inside, and then the faces. Again white 3 purl rows and close the knitting by knitting 2 together.

The production of bunny booties is almost complete. Cut the thread and pull into the last loop. Leave the tip of the main color longer to use it for stitching.

Bunny ears

Of course, bunny booties should have ears.

Now the master class is nearing its end.

Product assembly

The lesson resulted in wonderful bright bunny booties that you can make in a different color or decorate at your own discretion.

Video: Long-eared hares slippers

Gallery MK on knitting booties "Bunnies" and other funny shoes

Dear donkeys, I am very pleased that you liked my booties. I receive letters in a personal with a request to give a description, I have never done MK. This is my first.
I knit on 4 needles, the seam goes only on the trail. Cast on 46 sts on needles.
to photo hosting →
I have one knitting needle thinner, just then the edge is not so stretched. Then I distribute the loops on 3 knitting needles and knit in a circle. 1p - front, 2p - and all even rows - purl. From the 3rd row I make an increase: 1 person, 1 loop (from the broach of the previous row, then I will mark it as ") 21 persons," 2 persons, ", 21 persons," 1 persons. 5 row: 2knit, ", 21knit, ", 4knit, ", 21knit, ", 2knit. 7 row: 3knit, ", 21knit, ", 6knit, ", 21knit, ", 3knit. . 9 row: 4knit, ", 21knit," 8knit, ", 21knit, ", 4knit. (62 loops) it turned out like this:
to photo hosting →
Now we take another thread, and we knit "teeth" 3 rows - front, 1 row - nakid, 2 loops together. And again 3 rows of the front. On the wrong side, the "white track" is very clearly visible.
to photo hosting →
we recruit it on an additional knitting needle to photo hosting → and knit the green loop and the loop from the additional knitting needle together. to photo hosting →"Teeth" are ready. Now we knit in a circle, (We already have one row connected) We knit the next row with purl, then again 1 row with front, and 1 row with purl. We take another thread, and we knit 1 row of faces, and 1 row of out.
to photo hosting →
There are 14 rows in total, or 3 lanes of a different color. We knit a "mysik" for this, on the first knitting needle we have 16 loops, for 2-10, we take the main thread, knit 9 facial loops, 2 together, turn over - 9 faces, 2 together. We change the color after two rows. We have 16, 10, 16 (42 loops) left; we knit with a white thread - 1 row of faces, 1 row of out. We knit holes for the lace with green thread: 1 row of faces, 1 row: yarn over, 2 loops together, 1 row out. Next, we knit with an elastic band 1 * 1, 17 rows
to photo hosting →
Now we will turn the bootie inside out and continue knitting. We knit with a green thread 1 row of persons, 1 row of out. (Pattern - the number of loops is divided by 4, we have 42, in the first row with a green thread, I decrease 2 loops, and on 40 loops I knit a pattern) White thread, 1 row: 1 person, * 1 loop remove the thread at work, 3 persons*. 2 row: 1 out, * remove 1 loop, thread at work, 3 out *. Repeat rows 1 and 2 again. Knit with green thread 1 row of faces, 1 row of out.
to photo hosting →
Further with a white thread: 3 faces, remove 1 loop, thread at work.
Next row: P3, slip 1 st, yarn at work.
Repeat these two rows again. We knit with a green thread: 1 row of faces, 1 row of out. With white thread: 1 person, remove 1 loop, thread at work. In the next row we knit: 1 out, remove 1 loop, thread at work, 3 out. Repeat these two rows again. And we knit with a green thread 1 row of faces, 1 row of out. Here's what happened:
to photo hosting →
The pattern fits well. The change of threads goes on the wrong side, on the front it is not visible. We knit with a white thread 1 row of faces, 1 row of purl, and close the loops. We sew the trail. Boote is ready.

Bunny booties: knitting for kids in a master class

Bunny booties: knitting for kids in a master class

If a child does not like to do something, there is only one way to change the situation - turn it into a game. Not all kids like to dress up, but if the clothes resemble a funny toy, the process will become much more pleasant. I bring to your attention a master class that will help you knit very cute Bunny booties made with knitting needles. Even the most crybaby wear them with pleasure!

The course of knitting booties

The master class was prepared by Ekaterina Kuryleva.
To knit bunny booties with knitting needles, we need yarn in two contrasting colors. For girls fit pink and white, for boys blue and light gray. Choose the composition of the yarn based on the time of year. For summer and spring, cotton, viscose or silk is suitable. For the cold season, wool, acrylic, kid mohair. In our case, the composition of the yarn is 50% wool, 50% acrylic, it is soft, hypoallergenic and very warm. Also, for work, you will need a set of stocking knitting needles that are suitable in size for the yarn.

We knit booties The length of the foot of these booties is 13 cm. You are guided by the length of the legs of the child for whom you are knitting. If possible, try on while knitting, or find out the exact size of the leg, if you knit to order. Conventions that will be found in the description of knitting cute bunnies:

• row - P;
• loop - P;
• facial loop - LP;
• purl loop - IP;
• knitting needle - SP.

This master class does not contain a diagram, just follow the descriptions. We start work with the soles of the "bunnies". We knit with yarn of the main color. We collect five loops on the knitting needles. 1P - all LP. In the second P we make an addition. To do this, we knit two Ps from the second and fourth P. First, we introduce the joint venture behind the front wall, pull out the loop, and again insert the knitting needle into the same P, only behind the back wall. The remaining P knit IP.




Now there are seven P. 3R - LP on the needle. 4P - see the second row. It turned out 9 P. 5R - LP. 6P - see the second row. On the joint venture it became 11 P. 7R-19R - we knit with the front surface without additions. 20R - see the second row. We make two additions, on the joint venture it turned out 13 P. 21R-29R - the front surface. 30Р - we knit the first and second P together with IP, then all the loops of IP, the penultimate and last P together with IP. 31R - LP. 32R - see 30 R. 33R - LP. Further, in each even R we make a decrease at the beginning and at the end of R, and even R we knit the LP, until 5 P remains on the joint venture.










We close the loops. The sole of the "bunnies" is ready!

We pass to the yarn of a different color and knit "teeth". We will dial 16 P on the sides of the sole, 6 P on the toe, and 8 P on the heel. 1P - all P IP. We knit from the inside of the booties. 2P - two P together IP, then we make a crochet, again two together IP and so on for each joint venture. This is a simple scheme, thanks to which “teeth” will turn out on our booties later. 3R-4R - IP. On the front side of the product we attach the thread of the main color and knit 5 P-v.








We proceed to the formation of the toe booties. We will work on a joint venture with five loops. We knit all the P from the knitting needles of the LP, we change the fifth loop to the adjacent joint venture on the left and we put the first P on the one that we just changed. We return the resulting P back. We knit the next P, and with the last P we do the same as in the previous P. Thus, the loops on the sides are reduced. Continue decreasing until there are 6 and 7 sts left on the side needles.








We will knit two rows of IP. We work on the inside of the canvas. Now, we will knit five rows with an elastic band 1x1. Five rows of LP. A number of all LP. Five more rows of LP. We pass to a yarn of a different color: R - LP, R - IP, R - LP, R - IP (four rows in total).






Yarn of the main color two R LP. We change the thread again: R - LP, R - IP, R - LP, R - IP. We close the loops and make a lapel.

Now we need to sew the "teeth". We turn the booties inside out and with the help of a needle we sew the upper seams with the lower ones, as shown in the photo.

Here is what has already turned out from our "bunnies".

We knit ears for bunnies We turn to knitting ears. It is because of this element that booties are called "Bunnies". We will collect 18 P. 1P - SP with yarn of an additional color on the joint venture. 2P-5P - change yarn, front surface. 6P-7P - change the strand, front surface, close the loops. Ear blank is ready.






Fold the strip in half and sew with a needle. Now we fold it in this way, as shown in the photo and sew it inside.
By the same principle, we make the second ear and sew them to the booties. A nose can be embroidered with a thread of a contrasting color, and eyes can also be sewn or embroidered. Booties "Bunnies" made with knitting needles are ready!

Video lesson on knitting booties

You can learn how to knit such bunny booties by watching a video master class on the Happy Needlewoman channel. The video consists of three parts, carefully watch all. Good luck!

Photo example of knitting booties

Comments

related posts:

Knitting socks slippers on photo and video master class