home » I am 50 » Correct ironing of trousers with arrows. How to iron trousers with arrows: the secrets of fashionable classics How to iron men's woolen trousers correctly

Correct ironing of trousers with arrows. How to iron trousers with arrows: the secrets of fashionable classics How to iron men's woolen trousers correctly

What distinguishes married man from unmarried? Or economic from not very? Trousers! Or rather, the presence of arrows on them. Some styles, models of trousers look obscene without perfectly sharp arrows. In this article, we will tell you how to iron. Not everyone can get perfectly even creases, like in a store, so if you have dress pants in your wardrobe, the following recommendations will come in handy.

How to iron trousers with arrows?

Basic moments:

Not every iron is able to iron trousers so that the arrow remains for a long time. Therefore, it is necessary to choose it correctly. You can buy the most ordinary iron, but the most important thing is the steam function. Without steaming, deal with the question: "How to iron men's trousers with arrows?" won't work.
A spray bottle or spray bottle with water is also needed. Although in stores now you rarely see an iron without an already built-in atomizer. So check if you have it or not. If not, you can find it at any hardware store or large supermarket.
Ironing board. If not, a regular table will do just fine. Just cover it with some thick cloth or blanket and check that it does not slip on the table, otherwise the arrows will be “sliding”.
Cotton tablecloth or gauze soaked in water. So you can definitely cope with the question: "How to iron trousers with arrows?"

Preparation

So, the equipment is ready, the trousers are already on the ironing board. Now let's figure out how to iron trousers properly.

It is necessary to carry out preparatory steps:

Turn pants inside out.
Iron all seams, pockets and linings.

Before you start ironing, do not forget to look at the information on the temperature conditions at which you can iron the fabric. Otherwise, you will not figure out how to iron trousers properly. This rule should not be neglected. The temperature of the iron should be low, as it is necessary to iron woolen trousers, observing this condition.

How to lay out trousers for ironing?

Lay them out on the board so that all the seams match each other, especially the two inside side seams, and the front side seam should also match the inside. The trousers should be without bumps, if there are any, remove them with your hands; they must lie exactly on top of each other so that in the end the arrows are symmetrical.

main stage

If you immediately iron the upper leg, then all the internal seams will appear on it. To avoid this, put a towel inside.
We make arrows on the front side of the trousers, and not on the wrong side.
The iron dries gauze or other cotton fabric quickly, so prepare a spray bottle or spray bottle in advance with which you will wet the fabric. Of course, you can do it under the tap.
Pay attention to this detail: the surface of the iron must be clean, otherwise you will have to spend time getting rid of stains on your trousers.
To make the arrows stay longer, prepare a bar of soap: on the wrong side of the trousers, rub the arrows with a remnant of the arrows, this will strengthen them.

So, how does the ironing process itself take place?

Check again to make sure your pants are right.
Place a towel in the top leg so that the inside seams don't show.
Cover the leg with a damp cloth or gauze.
Let's start ironing: first iron just like a normal thing - eliminate wrinkles, bumps. Important: start ironing the trousers from the top. And do not forget to turn on the steam mode.
Flip the trousers over to the other side, right side up. Repeat steps 2-4.
Now fold the leg to the side: in front of you is the inside of the trousers. Iron it too, not forgetting the wet gauze.
Turn the trousers over again: now you have the inside of the second leg in front of you. Iron in the same way as the other inside.

Final step: arrows

Arrange the trousers as they were folded at the beginning of ironing.
Check again that the legs are parallel to each other.
Cover them with wet gauze.
Start ironing the arrows. Please note: we do not “carry” the iron, but we rearrange it so that the seams do not move out and new folds do not form.
Do not forget to use soap to fix the result.

There are a few more little tricks

Let's list them:

If you are not sure that the creases will stay in place during ironing, you can fasten the pants with paper clips.
You can add ammonia or vinegar to a spray bottle to wet the gauze. This will help fix the arrows and prevent their deformation during wear. Moreover, vinegar will protect against the appearance of greasy, greasy stains.
Earlier it was said that soap helps to fix the arrows. This is a fact, but there is one “but”: the soap should be without any additives.
It is impossible to hang trousers in the closet immediately after ironing or put them on. Let the product dry, and only then do with it whatever you want. Optimal drying time: five to ten minutes.
In order not to iron the arrows too often, constantly monitor the condition of the trousers: after wearing, clean them from dust and hang them in the closet.
In order for the trousers to wrinkle less, and the arrows to last for a long time, they need to be hung on a coat hanger so that they hang in the closet in full length and do not fold.
Start ironing the arrows from the knee area - this is the most "unstable" area: make arrows here, you can easily do it on other areas.
There are styles of trousers with darts-tucks. It may seem that such arrows cannot be ironed. But the eyes are afraid, the hands are doing: first iron the right front tuck, and then the left front and so on.

Conclusion

At first, this business will be difficult, but in fact, it is very simple, the main thing is experience. If you “fill” your hand, then soon the arrows will no longer be a problem for you, but will become just a matter of five minutes.

We hope that the article was interesting for you. Read the instructions carefully and do not forget the necessary equipment. Everything on the list should come in handy.

And remember: the arrows will definitely add elegance to your appearance. After all, it is trousers that distinguish a married man from an unmarried or economic one from not very different.

Pants are one of important details both women's and men's wardrobe. Their ironing is a laborious process.

To do without outside help, everyone should know how to properly iron trousers.

Preparatory activities

How to iron trousers with or without arrows?

Before you start ironing, you need to prepare:

Find a place to iron. If you are going to process the product on the table, then cover it with a dense light-colored cloth. If available, cover it with a special cover, or cover it with a thick blanket. In order not to spoil the product, spread a small piece of gauze on top.
Heat the iron to the temperature indicated on the pants label. The best option there will be a steamer, because without this function it will not be possible to make beautiful and even arrows. Also prepare a container of water or a spray bottle.
Turn the product inside out and place on the ironing surface.

When ironing clothes, use a thin cloth or gauze, especially natural materials(wool, silk or cotton).

Step by step ironing process

Once you have prepared everything you need, you can begin the ironing process.

Instructions on how to iron trousers:

First of all, you need to iron out all the details that are on the lining, as well as pockets and a belt. Then turn the pants right side out.
Next, you need to smooth the top of the product. In this case, a special pillow will help. It is placed under individual pieces of clothing.
Let's move on to the trousers. Fold the front and inside seams to each other. They must match exactly. Smooth them out on one side using the steam function. Then repeat the manipulations on the other side. Fold down the top leg and iron it from the inside. Repeat with the second part.

Arrows at this stage still do not need to be done. Remember that every area you work on must be covered with gauze.

The gauze should always be slightly damp, if you do not follow this recommendation, then the end result will be spoiled.

Working on arrows

How to iron creases on trousers? After the trousers have been ironed, you can proceed to the execution of the arrows.

The work is as follows:

Before you start ironing, find the darts. They are both on the back and on the front of the leg. Secure the tuck with a pin on the ironing surface, smooth the legs along the edge. Make sure both legs match at the seams and undercuts. And only after that start fastening them with pins.
Cover the product with gauze. Then you need to iron the arrows on the trousers. To do this, use the steam function.
Leave the pressed trousers with creases on the table to cool.

After 15-20 minutes, the ironed pants can be put on or put away in the closet, hanging them on a coat hanger.

Fixing arrows

A person, in addition to ironing trousers with arrows, needs to know what to do so that the arrows can hold on.

Experienced housewives give some important advice:

How to smooth out creases on trousers? To make the arrows better fixed, the water in the spray bottle can be diluted with table vinegar or ammonia.
Soap will help to smooth the arrows on the trousers and fix them for a long time. To do this, turn the pants on the wrong side and rub soap on the line along which the arrow will be smoothed. After this step, the leg is ironed.

Correctly ironing pants with arrows is not so difficult if you follow all the tips.

Ways to eliminate arrows

How to iron pants with arrows? Not everyone succeeds in making the intended arrows exactly, which in the end greatly spoils appearance products. Then another question arises, how to quickly remove them on ironed pants?

There is a way out of the situation, for this:

turn the pants inside out;
set the same temperature on the iron that was used to create the arrows;
well, using the spray gun or the steam function.

It is not always possible to fix the problem the first time, so you may have to repeat the steps several times.

Experienced housewives identify several rules for proper ironing:

Purity. During ironing, the high temperature from the iron acts on the item and dirt particles penetrate even deeper into the fabric fibers. Then getting rid of the stains will be even more difficult. Therefore, so that stains do not appear on ironed trousers, they must first be washed.
The composition of the material and the heating of the iron. The ironing temperature depends on the type of fabric. , wool, silk, cotton are smoothed using completely different technologies. To determine the desired temperature, located in the area of \u200b\u200bthe seams of the product.
Ironer. If you do not know how to properly iron men's trousers, then there is nothing to worry about. The main thing is to have a small piece of cloth on hand that will protect against direct exposure to the high temperature of the iron. It's called the ironer. It can be made of gauze or cotton fabric white color.
The wrong side. Before making arrows, men and women need to turn the product with an arrow on the wrong side. This will help prevent shine.
Spraying with water. A wet product is better for the ironing process. Therefore, you should always have a container of water or a spray bottle at hand. Better yet, get a steamer or steam generator.

After that, the smoothed thing is placed in the closet on a coat hanger.

Pointing arrows on your pants is not easy. Sometimes this process takes a long time. But every time a skill appears, after which ironing is no longer considered such a tedious task.

04 December 2013 Kaleidoscope

To answer the question: how to properly iron this or that thing, you need to know exactly the composition of the fabric from which it is sewn. When buying, find a tag on the inside of the thing, it will indicate the composition and ironing temperature. It is known that linen items wrinkle more than others, and it is possible to iron them with high quality only with an iron with a steamer and at high temperature. Cotton clothes are a little easier to iron, but they wrinkle almost like linen. It is better not to touch woolen and tweed things with an iron, and they should be ironed only through gauze or a thin cloth. synthetic fabric or a fabric with the addition of synthetic fibers almost does not wrinkle, and if this is nevertheless necessary, then look at the ironing temperature on the tag.

How to iron trousers.

Two centuries ago, men wore trousers without arrows. In our time, it is considered indecent if the classic trousers do not have well-stemmed arrows. It would seem that it is so difficult to iron trousers. However, not everyone knows how to do it right. If you want to make your life easier, buy trousers made of fabric with synthetics added, they wrinkle less and the creases on them last longer. If you are, after all, a lover of the classics, then our step by step tips will help you learn how to iron your trousers properly.

1. First, turn your trousers inside out. Iron the belt, pockets and lining, then nothing will fold into folds during the main ironing.

2. Fold the pants so that the inside seams match up and lay them out like this on the ironing board. Smooth out all the bumps and folds with your hands. Start ironing the legs through cheesecloth (if the fabric is natural), but do not touch the arrows yet.

3. Put the top of the trousers on the edge of the ironing board and iron it, while turning the item around the axis. In this way, you will be able to iron the fabric well near the pockets, waistband and zippers. Arrows are not ironed yet.

4. Now it's the turn of the arrows. You have to be careful not to iron the double arrows. To prevent this from happening, iron them in small pieces. If after washing there are no arrows at all, fold the trousers again with the inside seams to each other, but steam the arrows on each leg separately. If the fabric slips, then you can even baste the legs with large stitches.

There are some tricks that came to us from the days when there were no steam irons. To keep the arrows longer, you need to rub these places from the wrong side with dry soap, preferably household soap, and then iron the trousers, as usual. Such arrows are stored until washing or until rainy weather.

If the fabric from which the trousers are sewn slips and it is impossible to fold the legs evenly, spray them with water from a spray bottle, then the fabric will become more obedient.

From socks, time and ironing, trousers, at times, shine. To avoid this, iron your trousers through gauze, which you first soak in water, adding table vinegar to it. Just do not overdo it, so that later you are not pursued by this smell. With this composition, you should not iron the trousers completely, but only the places that are shiny. In addition, the arrows, ironed in this way, will keep a decent look longer.

Immediately, as soon as the trousers are ironed, do not hang them in the closet and do not wear them, as the warm fabric will immediately wrinkle again.

How you store your pants in your closet will determine how often you iron them. It is clear that they are not stored folded. Hang trousers on a hanger (trempel) in a folded form, after straightening the arrows. You need to choose a trempel for trousers with a thick crossbar, and it is better if it is covered with foam rubber. So you will have to iron your trousers no more than once a week.

How to iron jeans.

Jeans have become popular in our country in the last century. If you ask any resident of a Western state how to iron jeans properly, he will probably be very surprised and is unlikely to understand why iron them at all. After all, it is enough to wash them correctly, and then dry them properly. Everything related to washing denim trousers is indicated on the tag, that is, the water temperature should not exceed forty degrees, and the spin cycle is very delicate.

But with the drying of jeans is not so simple. If you wash by hand, then you should not wring out the trousers, hang them so that the water drains. But it should be remembered that it is not worth throwing them over the rope in the usual way, since creases and loss of color form at the points of contact. Jeans should be hung up, fixing them with clothespins in the belt.

So that you do not suffer later with ironing, carefully straighten the damp cloth with your hands. This is easy to do, given the characteristics of cotton, and after the jeans are dry, they will look ironed.

If, nevertheless, you did not take into account the drying rules and the jeans were very wrinkled after washing, then you will have to iron them. remember, that denim iron only from the wrong side, otherwise they will acquire a glossy sheen and may even lose color. Unlike classic trousers, when ironing jeans, you should not use a steamer, it is better not to overdry them. Right after you stroked jeans, do not wear them, as the fabric from which they are sewn tends to stretch and lose shape.

How to iron a men's shirt.

If you do this often, the whole process will eventually take you about four minutes.

1. Let's start with the sleeves. If the sleeve on the shirt is short, then iron it on both sides, with an arrow. If the shirt is long-sleeved, then we start ironing it from the cuff.

2. Let's move on to the main part of the shirt. Lay it out on an ironing board and gently smooth the bar between the buttons with the tip of the iron.

3. Next, iron the back and front of the shirt.

4. Finally, the most difficult thing remains - a coquette. Here you can use the armrest of the ironing board or the narrow part of the board itself. The part of the yoke, which is located behind the collar, is more convenient to iron from the back, and the edges of the yoke - from the front of the shirt.

5. The collar remains. To make it look good, it should be ironed thoroughly with a steamer.

How to iron a men's jacket.

Few people, not only from men, but also from women, know how to properly iron a men's jacket. This is a rather complicated matter, but your appearance depends on a jacket that looks neat and well-groomed.

First of all, it must be taken into account that you can iron the jacket only after you have thoroughly cleaned it (we will talk about how to do this a little later). The jacket is always ironed only through the fabric, otherwise it cannot be avoided that it will become shiny. Here you will need an iron with a steamer, with which you can smooth out the wrinkles at the top of the sleeves and at the bend of the arm, as well as on the bulges around the elbows.

The jacket should be ironed with a not too hot iron, but after reading the recommendations for caring for the item indicated on the label. Before ironing, carefully straighten the sides from the inside out. Turn the pockets inside out and iron them through a damp cloth, then carefully tuck them back in. Sleeves should be ironed until they are completely dry. In addition, we must try to make sure that the folds are not smoothed out on the elbow seam.

When the sleeves are ironed, you can move on to the shoulders. Shoulders should also not be dry. They need to be ironed while they are quite damp until dry. Then you can begin to iron the back through the fabric, then the shelves. Lapels are ironed first from the inside, and then from the front. This part of the jacket requires special care, since the appearance of the jacket, first of all, depends on the lapels.

If during ironing the seam on the collar or lapel is pulled together, then it should be gently stretched with an iron until it straightens out. Put a damp cloth on the seam, place the iron on it, and straighten the jacket part with your hand, then gently straighten the seam with the tip of the iron. After that, iron the entire collar or lapel, but try not to stretch it. The seams on jackets made from woolen fabrics sometimes stretch out. This can also be corrected by ironing the seam through the wet gauze, pressing down firmly on the iron until the gauze is dry.

How to clean your jacket yourself.

It is not always possible and willing to take things to dry cleaning. But we must admit that self-clean outerwear and the jacket is quite tricky. However, we will give you some tips, and you will try to do it. On a large flat and level surface (on the floor or on a table), lay out a blanket (spread) and place a jacket on it.

Now we need to prepare a cleaning solution. To do this, take a liter of water and dilute two tablespoons of ammonia in it. Soak a clothes brush in this solution and go over the jacket in the direction of the pile until it becomes damp. After that, iron the jacket through the fabric, then hang the jacket on a coat hanger and brush against the pile with a dry brush. To make your suit last longer, clean it with a dry brush after every wear, and wet clean it once a week.

Greasy and dirty places on the inside of the collar can be removed with a raw potato. It needs to be cut in half, clean the collar, and then wipe it with a damp cloth, then wipe it dry.

Most often, the suit shines on the sleeves (cuffs and elbows). These places should be wiped with a swab dipped in gasoline, and then brushed again with a cleaning solution, as described above. Then iron these places through the fabric. And hang your jacket outside to air out to get rid of the odors.

You can also clean your jacket with a slightly different solution: three parts vinegar to one part water. Such a solution is treated with especially contaminated places. If the gloss has just appeared, then it will be enough just to steam it through a damp cotton cloth.

The cuffs and collar of the jacket can be cleaned with a solution of salt and ammonia. It is prepared as follows: dissolve half a teaspoon of salt in three tablespoons of ammonia. Then hang the jacket in the air so that the smells disappear.

Also, read on the website:

(no subject)

Hello girls, I’m due to give birth in 2 weeks (if everything goes well). I’m not yet ready for this either physically or mentally. But. Some strange calm came to me, and even adequate (which was not ...

admin

Pants are the subject of both women's and men's wardrobe. Both sexes look great in ironed clothes, so it's important to know how to iron pleated trousers. They give presentability and rigor to the image, defining the business style. A special detail is the ironed hands. Smooth, sharp arrows indicate a scrupulous attitude to appearance.

Most models are sold with clearly visible arrows, which disappear immediately after the first wash. To return them to their original presentability, you need to be able to iron trousers with arrows. If you have this type of clothing in your wardrobe, you should be able to iron it, making the arrows symmetrical. We will tell you the nuances of proper ironing: what to pay attention to, how to lay even, stylish arrows.

Where to start ironing?

At first glance, the process does not require much effort. Turn on the iron and run it over the fabric. This impression remains until the moment you actually pick up the iron.

Each item must be pre-prepared before ironing, so as not to spoil it.

We suggest that you familiarize yourself with five points that will save you from mistakes.

Iron clean trousers.

Regardless of the type of fabric, type of clothing, it should be ironed only in pure form. Any particles of food, dust, dirt, streaks and other stains under the influence of heat penetrate deep into the structure of the thread. When heated, the elements are heated and soaked into the fabric. impossible at home. To prevent this, take time to wash before ironing.

Mode selection.

The temperature should be set depending on the type of product material. Wool, cotton, nylon and silk are ironed at different temperatures. By choosing the wrong mode, you risk leaving tan marks on the legs.

Do not set the mode more than necessary, and if the iron becomes difficult to move over the fabric, you should stop ironing and set a lower temperature setting. You can find out what the heating intensity should be in each case by the label. It indicates how many points should be selected on the iron.

Thin fabric or iron

For high-quality ironing and "pointing arrows" you will need an ironing iron. This is the thinnest cotton fabric or gauze. It will protect the fabric of the trousers from the effects of hot metal. For these purposes, choose a white or light-colored cloth to prevent accidental staining.

Turn out and not?

Talking about the technology of ironing trousers with arrows, one cannot miss an important question: to iron inside out or not?

By turning the product inside out, you protect it from clogging and the characteristic sheen that appears after exposure to a hot surface.

Pulverizer or sprayer

Ironing trousers and creases is easier when the fabric is damp. Some models of irons have a water spray function, but, in extreme cases, you can use plastic bottle with spray cap or spray bottle. If you iron often and a lot, get a steam generator. It acts with hot air and perfectly smoothes the fabric without leaving wrinkles.

What is required for ironing?

So, in order to iron the pants you will need:

ironing board or any flat surface that should be covered with a thick cloth or a special cover;
steam generator or iron;
gauze or a thin cotton cloth;
sprayer with water, soft pad and pins.

Before the main process, carry out preparatory work:

turn the product inside out and iron the lining, pockets, belt and codpiece area;
smooth the back seam carefully.

Technology: how to iron?

After ironing from the wrong side, lay the trousers on a flat surface. Straighten with your hands, connecting the side seams of the legs on the inside. To check if they match, put the legs on top of each other. Check that on each leg the side seam on the right side matches the seam on the inside.

It is more difficult to decompose the upper part correctly. There are many purl seams that should be ironed with care. With standard operations, internal seams can show up, giving the product an unaesthetic appearance.

To get an excellent result, use a special pad. Place a pad in the difficult area and cover the fabric with a damp cotton cloth.

Now feel free to iron. Since moisture evaporates quickly under the action of a hot iron, spray the fabric with a spray gun. If the iron is equipped with a steam function, turn it on, but moisten the cloth from time to time with a spray bottle.

After the upper part of the trousers has acquired an even, dignified look, proceed to the legs. Iron the legs, but bypass the creases. Once you've worked one side, flip the pants over and do the same procedure on the other side.

Straight arrows

The creases on the pants slim the figure and give the look an official style. The creases are ironed out on trousers with a classic cut. They are sewn especially - two straight stitches are used in front and behind. With them, you should start ironing your trousers.

To understand which lines to lay the arrows on, find the back and front darts. They are the beginning for arrows. Secure the leg to the surface using pins. Check again that the seams match both between the legs and on each leg. Cover the marked lines with a damp cloth, pressing a little with your hand, and start ironing.

Under the action of hot air, the product will take the desired shape and retain it for a long time. Vinegar water will help strengthen the arrows. Add 3-4 drops of ammonia or vinegar at a concentration of 9% to the spray bottle. The solution fixes the smoothed arrows, preventing them from wrinkling.

How to iron trousers with arrows if they have darts-tucks? Smooth out the right tuck first and only then take on the left. Then take on the arrows by performing the above steps. After ironing, the trousers must cool down, otherwise the material will quickly wrinkle, and the arrows will become invisible.

January 15, 2014, 04:06 PM

The most important part of the business wardrobe for both men and women is trousers. Often classic models require proper care. It is difficult to imagine a strict outfit without trousers with perfectly ironed arrows, and we are talking about this today. Let's figure out how to properly iron trousers with arrows after washing, so that the arrows look like new. Science is not easy, but mastering it is real. It just takes a little patience and perseverance.

The history of arrows

The development of the clothing industry took place in the middle of the 19th century. At that moment, pants began to be sewn in factories and factories. The long journey from the manufacturer to retail outlets contributed to the fact that in tightly packed boxes, products acquired a fold at the point of inflection. The person who allowed himself such an expensive purchase flaunted these folds-arrows for a long time to show others that the wardrobe item was new, in other words, “from the needle”. Over time, it was noticed that the pleats on the trousers give the owner a slim, respectable and well-groomed appearance.

So the fashion for classic trousers with thin and even arrows came into fashion. The festive outfit was systematically updated, armed with an iron.

How to prepare your pants

To begin with, you need to properly organize the workplace.

Install an ironing board, and if it was not on the farm, then it is permissible to use any horizontal surface: floor, closet, chest of drawers, sofa or table.

Important! If you use an unsuitable coating, then be sure to protect it by covering it with a cloth in several layers.

Before you start ironing, pay attention to the label on the product. It should be written there that the fabric retains the ability to wrinkle under the influence high temperatures.

If you have an ordinary iron without steam and additional functions, use a protective material in the form of any thin fabric or gauze.
Inexperienced housewives prepare pins in advance, with which they pin the legs to the board in order to fix them motionlessly and, accordingly, iron them correctly.
It is better if the material of the product is wet. This will help prevent the item from returning to its original position after ironing.
The temperature depends on the information about the composition of the fabric, which is indicated on the label of the product.
For insurance: natural fabrics are ironed at high temperatures, and synthetics at low or medium.
First turn the garment inside out and smooth out any wrinkles.
Having completed all the preparations, you can start leveling from the “face”.

How to smooth wrinkles

The style of men's trousers is significantly different from women's. In the latter case, the use of tucks is provided. They visually slim, emphasizing all the curves. female figure. In addition, for the convenience of women, they make: straight, narrow and cropped trousers.

If you need to quickly solve the problem of how to iron trousers with arrows, all the features of the wardrobe item are taken into account. Preparation of things for ironing is identical for all men's models.

Women's styles

Iron the product from the inside. At the same time, do not disregard such complex elements as tucks, pockets, belt. The next instruction is:

Turn pants right side out and lay flat on a flat surface.
Women's skinny trousers are stacked so that not only the fold line is connected, but also the darts.
To keep the thing lying evenly, attach it with pins.
Lay damp gauze over the fabric.
Start ironing.
Once you have finished ironing the first leg, carefully move it aside and iron the second leg.

How to properly iron male models

Initially, it is better to iron all difficult areas - pockets, zipper areas and belts. It's best to do it from the inside out. The execution scheme is the same as for female models. The difference is that men's don't have darts. If a male novice takes up the case, it is better to see a photo or video of the process before starting.

Important! Periodically use a spray bottle to moisten the fabric. Please note that an even fold is a rather long occupation, and under the influence of high temperatures the gauze dries quickly. It is better to constantly keep it moistened.

Where are the arrows

Pay attention to a number of rules where it is better to place beautiful kinks on the legs.

the fold runs strictly along the shared thread;
the strip must be in the middle of the knee;
arrows run along the entire length from the very top to the bottom cut.

How to fold your pants for ironing

Focus on the position of the crotch and side seams. If the task is to iron the arrows, then try to match the legs as accurately as possible on the sides and bottom cut.
Make sure that the outer and crotch seams lie clearly on top of each other.
For reliability and insurance, pin the legs with pins.
Women's models are much easier to iron, because they have tucks, and for men's options, control and constant attention to the position of the seams are important.

Important! Pins sometimes do not solve the problem of skewed fabric, especially if you are ironing on a curved surface.

How to extend the life of arrows

Even if you tidy up your suit and make perfect folds, the first wash will negate your efforts. To save the result for a long time, you should take an interest in the intricacies of saving arrows. To prolong the life of the arrows, it is easy and simple to use folk recipes, their cost is cheap, and the effect is long-term.

Soap application. Take laundry soap or any remnant and draw along the ironed lines from the wrong side. After that, just iron the legs again from the front.
Use of starch. In areas of the knees or buttocks (where the folds do not hold well) can be treated with a starch paste from the inside out. After it is completely dry, turn the product inside out and iron it “off the face”.

Table vinegar. Dilute a tablespoon of vinegar in a liter of water. Soak the cotton fabric in this solution, place it on the clothes and start the ironing process.
After the end of the procedure, do not immediately put on the product. Let it cool down for 6-7 minutes. In this case, the thing will stay neat longer.
If you have ironed your trousers in advance, then store them on a hanger, or hang them up without folding them.

Now you already know how to iron perfectly straight lines on his pants, so your attention is a few useful tips for competent ironing or in emergency situations.

If the fabric on the knees has stretched and lost its shape, then go over the fabric with a damp cloth with tangential movements. Return them to their original shape, and only then iron them.
If the material is natural, then sew the arrows with thread before washing. That way they won't fall apart. Stroke in the usual way.
The crease on the leg, remaining after lengthening, you can try to remove with wet gauze. Iron inside out to prevent shininess. Set the maximum allowable temperature for a certain type of fabric. Place the iron on the gauze and wait for it to dry completely. If necessary, repeat the procedure for the complete disappearance of the crease.

The fact that I meet people by their clothes has long been known from folk wisdom. If you properly steam and iron your pants, you will look like a needle. Ideal arrows add a plus for karma in the eyes of others, and double or fuzzy arrows will spoil the opinion of you. The acquired knowledge and constant practice will help keep the wardrobe in order.