Hat viking helmet for a boy crochet. crochet viking hat

Dimensions

For age 2 (3) 4 (5) years

You will need

Yarn (70% wool, 30% nylon; 50 g / 77 m) - 2 skeins of black, 1 skein of white, gray and dark gray; knitting needles No. 3.5; circular needles No. 3 and 3.5 40 cm long; stocking knitting needles No. 3 and 3.5; hook number 4.5.

patterns

pearl pattern

1st row: alternately 1 facial, 1 purl.
2nd row: alternately 1 purl, 1 facial, i.e. knit with an offset relative to the loops of the 1st row.

1st + 2nd rows constantly repeat.

Decrease 1 p.

2 p. Knit together with the front one with a slope to the left \u003d 1 p. Remove, knit the next loop with the front one and stretch the removed loop through the knitted one.

Front surface

Facial rows - facial loops, purl rows - purl loops.

Knitting density

22 p. x 30 p. = 10 x 10 cm, connected stockinette stitch knitting needles No. 3.5.

Completing of the work

Headphones

On knitting needles No. 3.5, dial 5 p. And knit with a pearl pattern (1st p. \u003d out. R.), At the same time, start and finish the row with out. P.

To expand the earpiece on each side in each front row, add 1 p. To do this, knit a trace. way: 1 knit., 1 yarn, then knit the loops according to the pattern, finish the row with 1 yarn, 1 knit. In the next out. R. Twist the yarn over before knitting 1 time, purl the outer loops.

When there are 23 (25) 27 (29) sts on the needles, finish out. close and cut the thread.

Tie the second earpiece in the same way, but at the end do not break the thread, but dial at the end of the out. row 6 (7) 8 (9) p. for the back of the head of the cap. On these loops, knit with a pearl pattern, then continue the pattern on the earpiece loops, then dial 22 (26) 30 (34) sts for the front of the head, knit the loops of the second earphone and dial another 6 (7) 8 (9) sts for the occipital parts of the cap = 80 (90) 100 (110) p. on the needles.

Knit 1 p. facial, 1 p. purl, 1 p. facial.

Change the thread to gray and knit 1 p. facial, 2 p. pearl pattern and 5 p. facial.

In the next row, knit 2 (3) 4 (5) sts with a gray thread, * on the next loop with a dark gray thread, make a bump = 1 knit, 1 yarn, 1 knit, 1 yarn, 1 knit. \u003d 5 p. on a knitting needle from one p., turn knitting and knit these 5 p. p. knit the front and stretch through it the removed p., 1 person., 2 p. knit together the front, 2 extreme p. stretch through the middle p., knit 8 (9) 10 (11) p. with a gray thread *, repeat from * to *, finish 2 (3) 4 (5) sts with gray thread.

Continue knitting with front stitch with black thread.

After 3.5 (4.5) 5.5 (6.5) cm from the beginning of the front surface, decrease (if necessary, switch to stocking needles):

1st p. decreases (the beginning of the row = the middle of the back of the head): * 2 p. Knit together faces. with a slope to the left, 6 persons., 2 p. knit together persons. with a tilt to the left *, repeat from * to *.

2nd p. Decrease: * 2 p. Knit together faces. with a slope to the left, 4 persons., 2 p. knit together persons. with a tilt to the left *, repeat from * to *.

Knit 5 rows without decreases.

3rd r. Decrease: * 2 p. Knit together faces. with a slope to the left, 2 persons., 2 p. knit together persons. with a tilt to the left *, repeat from * to *.

Knit 5 rows without decreases.

4th p. Decrease: * 2 persons., 2 p. Knit together persons. with a tilt to the left *, repeat from * to *.

Knit 5 rows without decreases.

5th p. Decrease: Knit 2 sts together. with an inclination to the left along the entire row, break the thread, stretch it through the remaining loops, tighten the loops and fasten the thread.

Headphone binding

From the front side, along the edge of each earpiece, cast on circular knitting needles No. 3 with black thread evenly loops and knit in the forward and reverse directions 3 p. front loops, then cut off the thread and fasten the ends.

Horns

For each horn on knitting needles No. 3.5, dial 20 (20) 22 (22) p. And knit with front stitch 3 p. (1st p. \u003d out. row).

IN next persons In the left row, start decreasing: 1 person., 2 p. knit together with the front one, knit a row with the front stitch until the last 3 p., 2 p. knit together the faces. with an inclination to the left, 1 persons.

Next, perform 3 p. front stitch, in the next faces. R. decrease in the middle of the row: knit until 2 sts remain until the middle of the row, knit these 2 sts together. with a slope to the left, knit the next 2 sts together with the front and finish the row with the front.

Knit 3 more rows. facial, the next row to perform with reductions in the middle.

Next, knit 1 p. facial smoothness. And then perform the last row with decreases: 1 person., 2 p. knit together the front, 2 p. knit together the faces. with a slope to the left, 2 p. knit together the front, 2 p. knit together the faces. with a tilt to the left, finish 1 person.

Then knit another 1 p. and break the thread, leaving the end for the seam.

Pull the thread through the remaining loops and sew the edges of the horn with the same thread, while pulling the seam slightly to give the piece a bent shape.

Fill the horns with filler and sew to the hat, as shown in the photo.

Ties

In the middle of the earpiece, crochet 1 half-column and a chain of 40-60 ch. (the number of vp scored depends on whether the ties will be tied or will serve only as a decorative element). A chain of v.p. tie in the opposite direction next to the conn. Art.

Perform the second tie in the same way.

Photo: Burda magazine. Creation №2/2013

What I was looking for, how I attacked this masterpiece of knitting art, is no longer important.

And the important thing is that the husband, seeing this photo, immediately demanded to tie him the same as a gift to his brother: “Let him go fishing in it”

And if you are going to use the Tour to Spain, then such a hat is unlikely to be useful to you. Spain is certainly a country of contrasts, but the temperature there does not fall below zero even in winter. A favorite recreation area for tourists is the Mediterranean, famous for its wonderful weather at any time of the year.

Well, there's nothing to be done, we don't live in Spain, I started knitting. However, the hat was knitted quickly.

The main difficulty turned out to be to tie this beard: what pattern to take? how to knit: crochet or knitting? how many loops to dial? ... etc. and so on.

After consulting with the girls on various needlework forums, I decided on tactics and set to work ...

For such a hat, it is worth taking bulky yarn - it looks spectacular. In general, I connected two threads - voluminous acrylic and thinner pure wool. The hook or knitting needles must match the thickness of the yarn, i.e. be 1-1.5 mm thicker.

You can knit a hat in any way convenient for you. I knitted with an elastic band from crossed loops 1x1.

beard I decided to crochet and started from the top: I dialed 65 ch. As a pattern, I took the following alternation of loops: 1st row - st.b.n., 2nd row of st.b.n., st.s.2n., 3rd row - repeat from 1st row.

In the second row you need to leave room for the mouth - I had 21 loops. To do this, I knitted the extreme 22 loops with a pattern, then ch 21, skipped 21 loops of the previous row, and knitted the remaining 22 loops with a pattern to the end of the row. We knit in a straight line 4 rows.

In the 5th row we knit 3 loops together on the sides: 7,8,9 - 13,14,15 - 54,55,56 - 60,61,62

In the 9th row we knit from the first and last loops, from 24, 29 and 36 loops, 3 loops each

In the 11th row we knit 3 loops from the first and last loops, and 10,11,12 - 30,31,32 - 33,34,35 - 52,53,54 3 together

In the 13th row we knit from 12 and 52 loops 3 loops each, and 24,25,26 - 30,31,332 - 36.37, 38 we knit 3 together

In the 15th row we knit 25,26,27 - 35,36,37 3 together. Total bottom row - 61 loops.

If you decide to knit a beard with knitting needles, I can offer a suitable “Corn” pattern for this:

1 row-1 persons, 1 out (wrong side),

2 row-1 persons, nak., 1p. remove,

3rd row-nak., Loop with nak. remove, 1 persons,

4 row-1 persons, we knit a loop with two crochets together out. pet.

5 row. pattern repeats from row 1

Mustache.

Scored 25 v.p.

1 row - I knitted 6 st.b.n. in the first and last loop, then we knit in a straight line, from 6 and 19 loops we knit 3 st.b.n., 12,13,14 we knit together

We knit the next row on the other side of the chain from the ch. - st.b.n.

Sew the mustache to the beard above the hole for the mouth.

Assembly.

On the left side I sewed the beard to the hat, and on the right side I made a Velcro fastener so that the beard could be fastened and unfastened.

Perhaps the mustache could have been made smaller, but the husband approved and asked to leave it that way.

In anticipation new year holidays I want to please my family and friends with an unusual gift made by myself and having practical use. The Viking hat is the best way to solve this problem - it’s creative, warm, and hand-tied :) This hat will serve a good gift both men and women (and both of them, regardless of their age), you only need to add a hat with either a beard with a mustache or braids. Instead of traditional horns, the hat can be decorated with small wings - as your imagination tells you :)

• interesting selection on the site !!!
• Children's hats, without adult models

To create a Viking hat you will need:

• yarn Alize Lanagold Plus (51% acrylic, 49% wool, 100 g / 140 m) of any shades that you like, the consumption of yarn for a hat for an adult is a little more than one skein, so it is better to buy two at once; the yarn is very warm, the products can be worn outdoors, for children you can make a warm version, put on over another hat;
• yarn Pekhorka "Children's novelty" (100% high-volume acrylic, 50 g/200 m) white color for horns, yarn consumption is small;
• a small amount of synthetic winterizer for filling the horns;
• hook No. 3 for a hat and hook No. 1.5 for horns;
• yarn for a beard (I took the same Alize as for a hat, but in other colors, the beard turns out to be very voluminous, you can take thinner yarn)
• a needle with a blunt end for stitching;
• buttons to secure the beard (buttons are not needed if you attach braids).

Viking hat, job description

The hat is knitted in simple single crochet stitches, the pattern for the bottom of the hat is attached (exactly 1/4 of the hat is shown on it).

The initial ring consists of 5 air loops. The bottom of the hat is knitted according to the scheme to the size that is needed (a table of sizes depending on head circumference and age is attached). When the required diameter of the bottom of the cap is reached, rows are knitted without increments to the required depth. The depth of the cap is also indicated in the table:

You can knit a simple hat, which will have only convex front posts from the decor, or you can decorate the edge with a simple ornament. The height of the ornament is about 4.5-5 cm, so when knitting it, you need to subtract 4.5 cm from the required depth (i.e. finish knitting the rows of double crochets 4.5 cm before the required depth of the cap).

The ornament no longer includes convex front columns and consists of the following rows:
1st row: single crochets behind the front walls of the loops of the previous row
2 row: double crochets behind the back walls of the loops of the previous row
3 row: double crochets alternating with bumps (knitting pattern is attached), the number of bumps can be any, I make 8 bumps)
4 row: double crochets
5 row: single crochet behind the front walls of the loops of the previous row
6 row: single crochet behind the back walls of the loops of the previous row
The end of the ornament is the completion of the cap itself.

For horns we take white yarn "Children's novelty" and hook No. 1.5. The horn has a classic shape, knitted with single crochets according to the following pattern:
1 row: 6 sc in the amigurumi ring
2nd row: 6 sc
3 row: * 1 sc inc * 3 times (9)
4 row: 9 sc
5 row: * 2 sc inc * 3 times (12)
6 row: * 3 sc inc * 3 times (15)
7 row: 15 sc
8 row: 5 connecting posts, 10 sc (15)
9 row: * 4 sc inc * 3 times (18)
10 row: 6 connecting posts, 12 sc (18)
11 row: * 5 sc inc * 3 times (21)
12 row: 7 connecting posts, 14 sc (21)
13 row: * 6 sc inc * 3 times (24)
14-15 rows: 8 connecting posts, 16 sc (24)
16 row: * 7 sc inc * 3 times (27)
17 row: 9 connecting posts, 18 sc (27)
18 row: * 8 sc inc * 3 times (30)
19 row: 10 connecting posts, 20 sc (30)
20 row: * 9 sc inc * 3 times (33)
21 row: 11 connecting posts, 22 sc (33)
22 row: * 10 sc inc * 3 times (36)
23 row: 12 connecting posts, 24 sc (36)
24-30 rows: 36 sc in each row.

We knit two horns.

This horn pattern is suitable for an adult; for children, you can reduce the pattern (link not up to 36 sc, but up to 30 or 33 sc and do fewer repetitions).

Ring holders are needed for horns. They are knitted in single crochet, in the same color as the hat. We collect the required number of air loops, depending on the size of the base of the horn stuffed with padding polyester, close air loops in a ring, knit 2 rows with single crochets. Then we connect the holders with the horns and already finished part sew to the hat on the sides.
Viking hat is ready.

Depending on who she will be presented to, she must be provided with either a beard or braids.
For braids, we fix the required number of long threads of the color you like on the sides of the cap from the inside and weave traditional braids.
For a beard, you need to tie a trapezoid base (the wide part is the top of the beard) and fasten the threads on it. Creating a beard is a purely creative process, the dimensions, length and color of the beard, the presence of mustaches and braids in the beard depend only on the imagination of the craftswoman and the wishes of the customer :) I used the same yarn for the beard as for the hat, but in a different color, the beard turned out very voluminous and warm. In order to be able to take it off and put it on, a couple of buttons must be sewn on the inside of the hat on the sides.
Here is our ready unusual gift. Rejoice yourself and loved ones! Happy New Year, everyone!:)