Crochet hats for autumn kitten. Hat with cat ears: a detailed description of the different ways of knitting a model with a crochet, knitting needles, with diagrams and a selection of videos
Knitted hats for children are always in fashion. They are warm, beautiful and practical. You can buy a ready-made hat, or you can knit it yourself.
It is mistakenly believed that knitting a hat is easy. After all, for this you need to have perseverance and know at least the basics of knitting. However, if you possess these qualities, knitting a hat will be within your power.
First of all, you need to choose a yarn that is suitable for a product such as a baby hat.
Children's knitted hat must comply the following criteria:
- It should be comfortable, that is, do not slip, do not bristle, do not press. Yarn plays an important role in this matter.
- The child's head should not sweat. Therefore, the yarn must be natural.
- The hat should not prick. Wool in this regard is not the most suitable option, although wool is a natural and warm yarn. You can't do without synthetic additives. In addition, synthetic fibers allow you to keep the elasticity of the product.
- The hat must be in season. Remember, cotton is summer yarn, wool, wool blend is winter yarn.
Important: To knit a quality, seasonal hat, pay special attention to the choice of yarn.
For spring hats fit the following types of yarn:
- Cotton with acrylic
- Merino wool (it doesn't prickle) for early spring
- Acrylic (yarn is easy to care for, soft but not natural)
- Alpaca and microfiber
Many mothers want their child to be dressed not only warmly and comfortably, but also fashionably. In a crimson hat with ears, the girl will look stylish, and complete with a coat, the image of your girl will be bright, fashionable and original.
Fashionable spring hat for girls The hat is knitted from the crown. Choose the right yarn. Not too thin yarn is suitable for this hat (75% acrylic, 25% wool will be just right).
Description of knitting:
- Dial a chain of 6 air loops, lock it into a ring.
- In the second row, knit 12 double crochets.
- In each subsequent row, increase the number of double crochets.
- Tie a circle in the way of increasing, which will correspond to the diameter of the child's head.
- Then, until the end of the knitting of the hat, knit with another pattern: seven double crochets in one loop, count five loops, knit again seven double crochets from the base of the sixth loop.
- Connect a bunch of columns with a connecting loop. In each row, the columns are arranged in a checkerboard pattern.
Pink hat for girls: knitting pattern When the main part of the hat is ready, tie ears double crochets according to the following pattern:
Pink hat for a girl: knitting pattern for ears Spread the remaining yarn evenly over the ears of the hat and tie the braids. At the bottom of the braid, you can make small pompoms.
Below are some ideas for crochet spring hats for girls.
Owl spring hat 
Crochet hat for girls 
Children's hat for late spring Beautiful crochet hat for autumn for a girl: diagram and description
Important: For autumn hats, you should take warmer yarn. It is desirable that the composition was wool. You can make a lining for the hat, but if the yarn is dense and warm, you can do without a lining.
A cap with a flower will warm the baby in a cool autumn and delight with its bright colors.
Autumn hat for girls To knit this hat, you will need two colors of yarn. The yarn can be half wool, half acrylic. You can take another composition, for example, 75% wool, 25% acrylic. The hook will need 3.5 mm.
- Like most crochet hats, this one needs to be knitted from the crown.
- Make a ring of air loops.
- On the next row, double the number of stitches by knitting a row with double crochets.
- In the third row, double crochet stitches alternate with embossed stitches.
- In the fourth row, knit 2 double crochets, 1 embossed.
- In the fifth row, between double crochet and embossed, add 1 air loop.
- In the sixth row in each segment we increase by 1 double crochet and 1 air loop.
- On the seventh row, double crochet 1 more in each segment.
- Increase the number of columns in each row until you get a diameter equal to the child's head.
- When you have tied the desired diameter, continue knitting without adding columns.
Knitting pattern for an autumn hat After you have finished knitting the main part of the hat, tie flower of two colors of yarn according to the scheme.
Knitting a flower for a hat Also tie the ears with single crochets. In each row, decrease one column on each side. Tie the edge of the finished product with yarn of a different color. Make a pom pom of any size.
Autumn hats can be completely different in appearance and composition.
Crochet baby hat 
Autumn hat for girls 
Hat with ears and a visor for girls Video: How to crochet embossed posts?
Warm hat for a girl's winter crochet: diagram and description
A winter hat must be warm. To do this, you need to make a lining - from fleece, from merino wool, from jersey with a fleece.
Important: Most often, fleece is used as a lining for a hat. This fabric is very warm and does not let cold air through. But it is worth saying that fleece is still synthetics. If you want a natural lining, knit it from merino wool or sew it from several layers of knitwear.
A winter hat will be very warm if knitted from wool. Many adults, and children in particular, do not like woolen products, as they are prickly. You can use merino wool, which does not prick.
Pink hat with a flower
For knitting you will need: hook 3.5; pink and white yarn.
The lining can be knitted or sewn from fleece. Here is the knitted lining.
Warm winter hat for girls 
Children's winter hat: scheme Knitting starts from the crown. The diameter of the circle is increased by adding double crochets. In the third row, lush columns are added, which give beautiful view cap.
In parallel, knit the lining with double crochets along the same dimensional grid, as in the main cap. When the hat is the size of the child's head, tie the ears according to the pattern.
Children's winter hat: step by step knitting Then proceed to the design of the flower:
- Knit the first row of the flower with double crochets (for loops 1 and 3 of the hat row).
- The second row is knitted like this: turn the knitting and make 2 double crochets in each double crochet.
- The subsequent rows are knitted similarly to the second. Tie the last row with white thread.
- The volume of the flower depends on your desire.
Children's winter hat: step by step knitting Below are crochet winter hat ideas for girls.
Crochet winter hat for girls 
Warm children's hat 
Hat for girls Crochet fashionable hat and scarf for a girl: diagram
The hat looks great with the scarf. Crocheting a simple scarf is not difficult, basically, it consists of double crochets. As a decor, you can add flowers or beads.
Hat and scarf set for girls Description of knitting
Crochet hat and scarf: knitting description 
Crochet hat and scarf: continued description Scarf color scheme
Crochet hat and scarf: color scheme on a scarf Other kit options.
beautiful kit for girls: hat and scarf 
Hat and scarf for girls crochet 
Crochet hat and scarf Fashionable, beautiful hat and crochet snood for girls: description and diagram
Snood- one of the most popular types of scarves in Lately. You can wear a snood both as a scarf and as a scarf on your head. Snood is long and voluminous.
Hat and snood for girls This hat and snood are knitted with lush columns.
Description of the header:
- Start knitting the hat from the top. Dial a chain of air loops and close it.
- Knit the first row with double crochets.
- The following rows are knitted with lush columns with the addition of lush columns in each segment.
- Adding is done until the desired diameter is reached.
Scheme for knitting caps with lush columns Finish the hat with a ribbing.
Knitting pattern for embossed elastic Snood it is also knitted with lush columns with a solid canvas according to the scheme.
Snood knitting pattern Another stylish set. Hats are knitted with single crochets, snood - with double crochets.
Crochet hat, snood and mittens Video: Snood with crochet ears for a girl
Crochet Mickey Mouse hat for girls: diagram
You can often meet babies in hats with Mickey Mouse.
Crochet Mickey Mouse hat: option 1 
Crochet Mickey Mouse hat: option 2 
Mickey Mouse hat for girls You can knit a similar hat according to the following scheme. Baby Hat Helmet Crochet Pink Hat Cat Hat Balaclava for Girls 
Children's balaclava hats
Knitting of a balaclava begins from above. The scheme is similar to the scheme of a hat-helmet.
Balaclava hat: scheme When you knit according to this scheme to the eyes, measure the distance that you need to leave for the cutout with a ruler. Then continue knitting, leaving these rows intact. Connect knitting, knit to the required length.
Knitting is a hobby that is not only exciting, but also useful. Spend your leisure time for the benefit of yourself and your loved ones.
Video: How to crochet a hat?
Good day to all!
Today we will start knitting and we will definitely knit a beautiful demi-season hat with “Cat” ears, which looks equally beautiful on adult girls and little girls. Yarn I have a wool mixture 390m / 100 gr Lanagold fine from Alize, hook number 2 and 1.7.
Legend:
CCH - column with 1 crochet;
RLS - single crochet;
PS3N - a magnificent column with three crochets;
SP - connecting (deaf) loop;
PSN - half-column with a crochet;
VP - air loop;
Pr - increase (2 columns in one loop);
Dec - decrease (from two loops one column).
First of all, we knit 2 samples of the main knit and determine the density in order to knit a hat of the nominal size that we need.
The first sample is completely CCH in rotary rows.
The second - according to the scheme of alternating SSN and PS3N. We erase the samples connected by us, dry it and only then we take measurements.
Important! Your samples with the same number of loops will differ in size. So I got a satin stitch of 2 cm 5 loops, and with lush columns in the same 2 cm there are only 4 loops.
We recall mathematics to calculate the number of loops we need. I have a required head circumference of 54 cm. Knowing the value of this measurement and having the measurement data of the samples, we can accurately calculate the required diameter of the circle to the size of which we need to increase. We make the calculation according to the second sample with lush loops.
54 cm: 2 cm x 4 loops = 108 loops. The required diameter of my bottom is about 108 loops.
Now I’m doing the calculation of the increments of the circle in rows, until we get closer to the number 108. So, we already know that in each row we have an increase of exactly 14 loops. I draw schematically.
1 row - 14 loops.
2 row - 14 + 14 = 28 loops.
3 row - 28 + 14 = 42 loops.
4 row - 42 +14 = 56 loops.
5 row - 56+ 14= 70 loops
6 row - 70 +14 = 84 loops.
7 row - 84+ 14= 98 loops.
8 row - 98 + 14 = 112 loops.
That is, having knitted 8 rows with increments, we can switch already in the 9th to the main knitting with lush columns. But such a sharp transition does not look very nice, and therefore I will knit a circle not 8 rows, but 10. At the same time, I will knit the 8th row without increments, but I will do them in the 9th row. And I will also knit the 10th row without increments. Such a crown will fit the head more beautifully.
The theory has been dismantled, let's move on to the practical part. These two photos are to help those who do not understand the principle of knitting increments in a circle.
We knit increases according to the laws of the circle to the desired diameter.
1 row: We knit a joint venture into the amigurumi ring and make 3 VPs (this will be our first column of the row), then we knit 13 CCHs into the ring. We finish the row of joint ventures knitted to the top of the first loop of the same row.
2nd row: We make 3 lifting VPs (they will be the first column of the row in each row), we also knit CCH here. And then in each CCH of the first row we knit 2 CCH. (there should be 28 stitches in the row). We are finishing a series of joint ventures.
3 row: 3 VP, 2SN. Alternating dc into the loop of the previous row and 2dc into the loop of the previous row (42 loops in a row).
4 row: 3 VP, dc, 2dc, * dc, dc, 2 dc * (repeat from * to * to the end of the row), SP. (56 loops in a row).
5 row: 3 VP, dc, dc, 2 dc, * dc, dc, dc, "dc *, SP. (70 loops).
6 row - 10 row we knit according to our calculations and scheme.
I hope that the principle of increments is clear even to beginners ... in each subsequent row we make 14 increments. So we continue to knit until the diameter of the circle reaches the desired size.
In the next - the 11th row, we pass to the main knitting.
11 row - 22 row: alternating CCH and a magnificent column with 3 crochets (PS3N)
Please note that the lush columns are staggered. Finishing the 11th connecting loop, we do not immediately knit 3 VPs, but make another connecting loop into the loop of the magnificent column of the previous row and knit 3 VPs from it. So the pattern looks prettier, and the back seam is almost invisible.
Of course, doing so in this way and in each subsequent row, our seam gradually shifts to the left.
Therefore, after knitting 3-4 rows, I proceed as follows. Having finished a series of joint ventures, I pull it out to such a size that a ball of thread passes into it, and tighten the loop. Without breaking the thread, I retreat to the right by 3-4 loops and inserting the hook into the upper loop of the magnificent column, I make 3 VPs of lifting a new row. At the same time, a small thread is hidden when a row is knitted into the body of the canvas. On this photo close-up the moment described above.
After 3-4 rows, I repeat this technique again. We knit until the size of our work becomes the required depth.
In my case = this is 22 rows. We finish knitting the cap, fasten and cut the thread, leaving the end 10 cm (I always leave the ends longer, so that later it would be convenient to thread into the needle and hide them with it).
Further, again, the knowledge of exact science will be useful to us, which, as Mikhailo Lomonosov said, "... then it should be taught that it puts the mind in order." We do the calculation. I'm talking about mathematics. The formula is standard. We divide our number of loops by 5. Two parts of five are for the face area, and one part for each ear and back. 112 sts: 5 parts = 22.4 (i.e. 22 sts for each part and 4 more sts.) Distribute these 4 sts as follows: 2 on the front and one on each eyelet. We receive. We will have 46 loops for the face area, 23 loops for the ears and 22 loops for the back. I mark all these places with markers (or safety pins).
We knit both ears according to the scheme. I apologize for my "art" and ask you not to judge strictly. I hope my crochet is much better.
We attach the thread at the seam and use a smaller crochet to tie the edge of the product with two rows of RLS. Do not forget to make the necessary reductions in the corners of the ears, and increase at the rounded ends of the ears, so that everything lies beautifully and does not “bulk”. If you want to make the hat bright, then it is better to knit the second row of the strapping with colored yarn and for the back half-loop of the column of the first row of strapping.
Let's start knitting the ears on the crown - those ears that make our hat "Cat" and which are so loved by kids and adults.
We knit according to the scheme for 2 parts of the front part and 2 parts of the back of the ear.
At this stage of work and before joining the front and back of the ear, I decorate the ear with decor. I sew beads with monofilament tightly and securely.
Now large embossed knitting is in fashion. A warm hat with ears for a girl is crocheted with a large viscous crochet. We are sure that your child will like it. Complete with a hat, you can also knit a snood of the same color. Our detailed master class and diagrams will help you in your work. Head circumference 50-51 cm.
For work you will need:
- Yarn cashmere or wool with acrylic - 100 grams per cap and 50 per snood.
- Some white yarn.
- Hooks number 4, 7 and 8.
- Centimeter.
We knit in three threads. Knit with regular single crochet. For warmth, you can do.
1 row: on hook number 7 we collect 3 air loops and close the circle.
2nd row: 9 single crochet.
3 row: 18 columns (2 in each previous one).
Further, it all depends on the size that you need to knit. We need to know OG. To do this, you need to measure the head of the child with a centimeter. We take the OG and divide by 3.14 (Pi number) and subtract 2 cm. If the cap is lined, then subtract 1 cm. For example: 51:3.14-1=15.2(15). Then we knit without additions to the required length.
You may need a size chart, but they do not always match, everything is individual.
The hat is 20cm high.
Then we knit the ears. With the same crochet number 8. We start with the upper ear ( dark color). We knit with single crochets.
Don't forget to tie the details. Ear knitting pattern:
We knit the inner ears. We work with white yarn and crochet number 4. The scheme for light ears is the same plus 1 addition and more for 2 rows. We tie the parts around with single crochets.
We sew light ears into dark ones. Light ears are smaller than dark ones, as they are crocheted number 4 and in two strands.
We make out the ears finally.
Sew the ears to the hat. It would be nice to first baste and measure on a girl. Don't forget to sew on the button.
How to knit a relief elastic band:
This is a finished elastic band, only 3 rows:
Then we go to hook number 8 and knit with single crochets.
After the elastic, we knit 15 rows with single crochets. As a result, the snood turned out to be 15 centimeters high.
This is the width of the snood.
We add 3 rows of elastic in height. It should end up being 17 cm.
We embroider such a crab.
As a result, it turned out beautiful and snood.
This crochet for a girl for a few evenings. The color may be different, there are several options at the end. Product for 46-48 head size. Height when worn 17 cm. If you need a different size - increase the number of columns in the circumference and rows in height. You can take yarn of a different thickness.
For work you will need:
- Pink yarn (wool with acrylic) - 80 grams.
- Yarn gray color(wool with acrylic) - 50 grams.
- Hooks number 2.5; 3; 4.5 mm.
- Some black and white yarn.
knit cap
First, we make a cap cap. We start with a pink thread. Wrap the thread 2 times around the finger and remove the ring. In this double ring, knit the 1st row: 3 air loops and 11 double crochets. Tighten the ring. We knit a hat with double crochets, add 12 stitches in each row (that is, knit 2 stitches in 1 at the same distance). To rise to the next row, knit 3 air loops. After 10 cm in diameter of the circle, we make additions through a row. Knit the expanding part until the moment when there are 72 columns in a row. Next, knit exactly to the desired height (17 cm). 12 rows are connected with pink thread, 3 rows with gray thread.
Eyelets for ties
Divide the knitting stitches of the circle into 5 parts. One for the back, two for the front, and one for the ears. We will knit the ears with double crochets, from the base the front and back rows alternate. The first purl row (that is, we knit, turning the work inside out to ourselves) is 15 columns. Only 6 rows: we knit the first 2 evenly, then in each row we remove 2 columns at the beginning and at the end of the row, that is, we knit 3 columns together.
strapping
On the bottom edge of the hat, knit a row with a single crochet, at the points of the ears, knitting 3 together, at the tips of the ears, 2 columns out of 1.
Prepare 6 pieces of yarn 80 cm long. Thread into the center of the eyelet. We braid a pigtail. We make a knot. We knit flowers according to the scheme.
Ears
Knit the back of the ears according to the pattern with pink yarn. Knit the inside with a gray thread. Fold both parts of the ear and tie the upper edges with 3 rows of single crochets. Knit at the top of the ear 3 columns from one. Prick the ears with pins in the intended place. It needs to be placed symmetrically. Sew the back of the ear with pink thread. Sew the gray part neatly with a matching thread.
The nose is knitted with a black thread: first a triangle is knitted, then it is tied with one row of a single crochet. The eyes are knitted according to the scheme: 4 rows of black yarn, the next - white. Knit according to the scheme:
We put a hat on a jar or ball, prick the nose with needles in the center at the junction of gray and pink, and eyes above it. Twist the black thread and embroider the mustache and eyelashes. Sew on beads.
You can knit not only classic sweaters, skirts or cardigans . Unusual and interesting products, for example, a crochet cat hat with ears will delight the eye and decorate not only little girls, but also young women.
To create like a cat, you need a 3.5 mm hook and threads of 220-250 meters in 100 grams of pink and gray. To make decorations and muzzles, you will need additional black and white yarn. The finished product is suitable for a head circumference of 48 cm. A different size headpiece can be made by changing the number of columns in a circle or knitting from yarn of a different thickness.
knitting hats
The hat is crocheted from top to bottom. We start work as follows. Wrap the thread around the index finger twice and remove the resulting ring. In it, tie 3 air loops to raise a row and 11 columns with double crochet . Run a connecting loop. After that, the ring is tightened. Next, we knit a hat in columns with double crochet , adding in each row, starting from the second, 12 new ones. First time 2 columns needed untie from one. In subsequent ones, they are knitted randomly, at regular intervals. Do not forget to knit air loops every time at the beginning of a new row, and at the end, connect the air column to the top loop.
Having connected a circle with a radius of 5 cm, we do not increase in each row, but after one. At the same time, we continue the work in rotary rows, i.e. after the end of each row, turn the work in the other direction. This must be done to align the seam and beautiful combination base caps with cat ears.
We make increases until there are 72 columns. This is the amount needed for a size 48 hat. The calculation is carried out in advance according to the sample. Then we continue knitting without adding or decreasing to the desired height of the product minus 0.5 cm for the harness.
The protrusions for the ties are performed as follows. The number of columns required to complete the circle is divided by 5. For size 48, 5 groups of 15 loops are obtained. We leave the first group on the back of the cap with ears, two on the front and one on each of the protrusions for the ties. You need to start knitting them so that the front and back rows go alternately, without violating the pattern of the base of the product. In total, for the ledge, you need to complete 6 rows. The first two are knitted without reduction. In the third, in each subsequent one, we begin to remove 2 columns at the beginning and end of the row. In other words, knit 3 double crochets together.
We oblige the cap on the bottom with columns without yarn over . In the places where the protrusions begin and end, we perform 3 together. On the bends and tip - 2 columns each without nakida from one.
Making strings
Thread six pieces of thread 80 cm long of the same color as the hat through the center of the edge of the ledge. Fold them in half and divide into 3 parts, 4 threads each. Braid a pigtail, securing at the end. Cut off excess thread.
Decorative flower trim
Crochet flowers according to the scheme. The first 4 rows are knitted in pink, and the fifth in white. In this case, the first three are knitted in a circle, and in the fourth, branches are made that will serve as the basis for the petals. The size of the finished flower will be 9 cm. You can increase or decrease it by playing with the number of air loops in the processes for the petals. This will shorten or lengthen the finished flowers by changing their size by about 1 cm. Another way is to change the number of rows of the circle.
Ear knitting
Let's get started with the cat ears. The inner and outer ear are crocheted as shown in the diagram. Then fold them so that on the outside the last row is front. Tie the two upper faces that form the tip of the ear with three rows of columns without yarn over , completing 3-4 columns from one at the vertices.
Sew the ears to a suitable place on the hat. They should be located symmetrically with respect to each other. The pink element of each ear is slightly moved away from the gray so that they stand better.
cat face
The details of the face are also crocheted, as the diagram shows. The spout is knitted with black threads in the form of a triangle, and then tied with 2 rows of a column without yarn over with air loops in the corners. For the eyes, you also need to take black yarn and knit a circle of four rows, and the fifth - white. At the same time, you need to knit it under the wrong side of the jumper of the previous row so that the black edge is even. The nose and eyes are steamed from the inside through the fabric and sewn onto the cap. When wet, the eyes need to be stretched a little so that they take on a beautiful oval shape. For a more lively look, a bead is sewn on the pupil. The mustache is embroidered with a thread folded in half. Their length is approximately 5 cm.
Hat warming
When crocheting the warp in the described way, holes will be visible between the columns. In order for the hat with cat ears to be warmer and not blown through, you can sew a lining inside after all the decoration is done. However, this must be taken into account immediately and knit the product a little bigger size than required. Alternatively, you can do the work in columns without nakida.
Hat with cat ears looks very original. It will be a great addition to the wardrobe of a lover of unusual things.
Another option is the Kitty hat.
