home » diaries » Inflatable paper stars. Origami stars and stars made of paper

Inflatable paper stars. Origami stars and stars made of paper

How to make a beautiful pentagonal paper star? Easily! With the help of ancient Japanese art - origami. Below - detailed instructions, and as a small preface, ideas about where it can be used. Fairy lights? - Yes! And also on the Christmas tree, on postcards, single pendants to decorate the room.

If suddenly it is not clear from the photographs, then video clips on the folding of this star have been added below. You can look at them - and then questions should not remain.

What will be needed for manufacturing? Square sheet of paper. Yes, if you want to make your life easier, you can simply download a ready-made pentagon template and print it out. For example . But if there is no printer at home, it will act as follows:

1. Fold a sheet of paper in half.

2. Fold the lower left corner to the center of the upper edge.

3. We bend the upper left corner to the center of the lower edge.

4. We bend the lower right corner to the resulting point (the intersection of two folds).

5. We combine the corner with the right edge of the figure.

6. We combine the bottom side with the fold line.

7. Turn the figure over and bend "in half"

8. Cut along the line.

We get a pentagon

We make folds according to the line in the figure

Matching the dots

Repeat these steps for each face of the pentagon

And then the magic begins 🙂 We add along the lines - and we get the first approximation to the star!

It remains to “finish” it a little by making 5 more folds (one for each face)

Males should pay particular attention to this work. After all, thanks to simple tricks, the cheapest raw materials and minimal time, you will be able to fulfill your long-standing promise: to give your beloved a star! And may it bring you happiness! Let's start with her.

These little origami stars look beautiful when there are a lot of them, and they are all the same. Therefore, immediately cut a sheet of bright colored paper into thin strips 27 cm long and 1 cm wide. The thinner the paper, the longer the strips should be. For thick paper, 13-15 cm is enough.

Description:

Tie a knot at the end of the ribbon. Bend the short tip so that you get a five-pointed outline.

Press the short, wrapped end of the tape over the long end and continue winding it almost in a circle. The form itself will tell you the direction. Try to make even turns, without skipping or moving the strip from the previous row. Do not pinch so that our star of happiness is voluminous. But do not loosen it so that it does not fall apart. When the length is over, tuck the tip of the strip into the “pocket” of the previous two turns.

Treat every corner. Squeeze the middle of the adjacent sides with two fingers and form an acute angle. The complexity and sharpness of the corner depends on the density of the paper.

Make a lot of these stars of happiness and give it in handfuls.

simple 5 pointed star

origami star

This asterisk is not as simple as it seems. Production details - see the video.

real color five pointed origami the star will be obtained from five modules.

Cut the same squares out of paper (3 blue, 2 yellow). Draw a diagonal.

Bend opposite corners with the adjacent side to the axis.

Turn the piece over.

Fold it diagonally.

Tuck the bottom corner so that its inner side becomes a continuation of the horizontal. Turn the workpiece over and tuck the second corner as well.

Fold the side right side along the drawn axis. Turn the module over and repeat the action.

Make 3 such modules from blue paper and 2 from yellow.

Place the left yellow horn over the right blue one. Make them hug.

To do this, unfold the sides and wrap again over the other horn..

Attach three more modules in the same way and the origami star is ready.

Shuriken. Throwing Ninja Star

Stars do not only for beauty. Sometimes they become formidable weapons. For example, shuriken is an iron throwing star, an obligatory attribute of oriental militants. We will make it out of paper according to the scheme shown in the photo.

Cut 10 multi-colored squares (2 of each color) of the same size and make modules from each as shown in the photo.

Connect them into a star by inserting a corner of one module into the pocket of another. Form a star by laying the segments along the long side in a “mountain” and along the short side in a “valley”.

For stability, make a frame from the same modules. Get another one of the same star. Lubricate it from the inside with glue and squeeze along the edges and folds. You get a convex star with flat rays. Place it inside first and glue.

Volumetric paper stars

From these stars you can make a garland for the holiday. The origami technique is used, details are in the video.

Stars of happiness (origami)

Happiness is in your hands!

Create happiness with your own hands - origami - stars of happiness!

In addition, happiness stars are a very elegant accessory for your home.

The stars are with us everywhere. The asterisk is always relevant: in New Year it can be seen at the top of the Christmas tree, a star from the sky can be obtained for your beloved on Valentine's Day, the stars are strongly associated with the Day of Defenders of the Fatherland. They also say that when you are born new person, lights up in the sky new star, why not light a small star in honor of the newborn on a card (and give it to happy parents)? A star can be a guiding one, give people who are going on a journey a star so that their path will be illuminated with it and they will be lucky.
The stars accompany us throughout our lives.

Do you know how to make stars with your own hands?

What are we going to make.

I cut the magazines into strips. The size of the strips is 29x1.1cm. You can cut the strips wider, but then the length should be longer. I tried to choose pages where more bright colors and less text, but I think that original stars will also turn out from black and white stripes. Looking ahead a little, I will say that the stage of cutting strips is the most difficult in the manufacture of stars. If you have a cutter or shredder that cuts paper into longitudinal strips, this is just great. Then this stage is much simpler and faster. I didn’t have these tools at hand, so I first cut the strips with scissors, which is very time consuming and not very accurate. And then it dawned on me that you can simplify the process if you use a ruler and a clerical knife ... And it wentsignificantly faster.

How will we do:

1) Take a strip of paper and make a loop.
2) Then we wrap a short tail, making a knot.
3) The knot is very carefully tightened and pressed. You should get an equilateral pentagon.

4) We wrap the tail on the back side. I made it on purpose
the tail is a little longer, so that in the photo you can see where we wrapped it.
But it's better to try to make it shorter so that it doesn't peek out.
the limits of the pentagon.

8-17) And now we begin to wrap the pentagon with a long strip
all sides, being careful not to press it too hard. Total should
get at least 10 wraps, i.e. each edge must be wrapped in
twice. This should be taken into account if you will change the thickness and length
stripes. With a width of 1.1 cm and a length of 29 cm, the star is 1.5 cm.

18) We hide the tip under the strip. If it peeks out, turn it up a little, and then hide it.
19) Now is the most crucial moment! It is at this stage that I
marriage happened. We hold the pentagon with two fingers of one hand, and with the nail
with the other hand we press on one face of the pentagon, trying to get into
the middle of the edge. We do the same with the rest of the edges.
20) Everything! Our star of happiness is ready!

For Victory Day, you can make paper crafts with your child in the form volumetric star. It should be made using the origami technique from a simple square red sheet. The finished element can be attached to the front of the postcard, where red carnations and a St. George ribbon should be drawn in advance. Also an integral part of the postcard for May 9 is a congratulatory inscription.

The star that we propose to learn how to make in this master class is not at all difficult to make, it will be necessary to perform a few simple steps in our step by step guide.

Necessary materials:

scissors;
pencil;
ruler;
square sheet of red paper.

Star folding steps:

We take a blank in the form of a square sheet of red paper. Fold the bottom half up.

Then you should bend the lower right corner up to the center of the workpiece.

Open and then fold the upper right corner down to the center.

Open the folded corner. We get two diagonal fold lines on the right side.

Then we'll work on the left side. To do this, bend the lower left corner straight to the center of the intersection of the two diagonal lines on the right side.

We return the corner to the left side, creating a fold.

Fold the bottom right side up. Between the right and left parts of the workpiece, you can see a line that goes at an angle.

It is on it that we bend the sides.

We turn the left side into the upper part of the craft.

With a ruler and a pencil, draw a diagonal line that will go from the right side down to the left.

We cut the workpiece along the marked line with scissors.

We turn over. We check the sides so that they are equal to each other. Then the star will have all the same sides. If the dimensions of one of the sides are violated, the length and shape should be immediately corrected with scissors.

We open the workpiece.

To get the beautiful sides of the star, bend the corners.

Today, we will learn how to make beautiful voluminous stars out of paper that can beautifully decorate some elements of your home. This simple craft, but even here you need to be extremely careful and attentive. Our instructions will help you make voluminous stars correctly and beautifully!

How to make an origami star?

In order to make an asterisk, we need only one strip of paper, 1.1x29 centimeters in size. It is better to take colored paper, or cut it out from some fashion magazine, so the star will turn out to be more attractive and beautiful.

Let's get started!

1. We take the prepared strip and make a small loop on one of the edges.

3. Press the knot with your finger so that it is flat. Now let's see if we got an even pentagon, if not, then we redo it.

4. We wrap the remaining tail to the bottom and wrap it around the resulting pentagon.

5. We turn over our craft.

6 . Hide the tail inside the pentagon.

7. Now, with the remaining strip, we begin to wrap our figure. We wrap it from all sides, and try not to press down the paper too much.

8. We hide the remaining tip of the strip under one of the layers.

9. Now the most important point, the asterisk needs to be made voluminous. To do this, gently press with your fingers on each face of the pentagon in turn until you get what we want.