home » I am 50 » March 8 from kanzashi ribbons. To create delicate snowdrops

March 8 from kanzashi ribbons. To create delicate snowdrops

Kanzanshi figure eight pink, decorated with mother-of-pearl half-beads and a bright bouquet of flowers - this is a symbol of tenderness, spring mood and, of course, a wonderful and expected holiday - International women's day. In early March, kanzashi craftswomen are in search of creative ideas, because, for sure, they have customers who will ask to make wonderful gifts. Reduced figure eight kanzashi master class perfect for the theme spring holiday. No woman can resist such a wonderful handmade souvenir. And if desired, everyone who studies this can make such a wonderful souvenir. step-by-step master class with photo.

What to make the basis for the kanzashi figure eight:

from two cardboard circles different sizes 7cm and 9cm hollow inside;

from a pale pink ribbon, the width of which is 1 cm or less, but no more;

of 18 mother-of-pearl half beads with a diameter of 0.6 cm.

What to use to model the central floristic composition:

40 square fragments of a red satin ribbon with a side length of 2.5 cm;

7 rectangular fragments of a green satin ribbon with side lengths of 1.2 * 8 cm;

10 bilateral stamens of white (or pale pink) color.

How to make a kanzashi figure eight step by step:

The floristic composition consists of 6 buds and one large three-layered flower. Each bud consists of three inverted red petals, glued together, inserted into pointed cups. Stamens and spiky leaves are additional details that complete the elegant bouquet.

Cut out two rings of the indicated sizes for the figure-of-eight base and prepare a pink ribbon. Or choose a ribbon of a different color, but preferably light, for example, white or cream is also suitable.

Make the rings satiny and delicate by wrapping ribbon around them. This is a simple but painstaking way to refine cardboard. Don't just glue the satin strips on top of the rings, as the result is unlikely to be neat.

Glue two round pieces. The junction will later be hidden under the buds and the flower, so the figure eight will look like a single product.

Prepare special inverted red petals from 2.5 cm square cuts, as well as sepals. Fold the green ribbon (7 rectangular fragments with parameters 1.2 * 8 cm, which are indicated in the list) in half (necessarily with the front side inward). Cut diagonally with a soldering iron or a hot knife blade. From each strip you will get a cup, which must be used on the bud, as well as the second quadrangular part of the petal, it will be used to decorate a large flower. In the red squares, make 2 middle folds, soldering opposite sides with a lighter. Next, curl a small triangle into a sharp kanzashi petal. After soldering the ends, turn the bottom corner outward.

For a large three-tiered flower, 22 petals must be modeled, and 18 of the same parts will be used for buds.

Glue together 4, 8 and 10 petals in tiers. Curl a small amount towards the center, and turn the other two outward.

Model 6 buds with 3 petals each. Glue everything into cups with a sharp tip.

Prepare big flower and red-green buds for decorating a gift.

Start gluing the details to the figure eight from the small ring, pushing the red protrusions of the buds up. Insert stamens between the parts. Each subsequent part is slightly superimposed on the previous one, and fill all the gaps with leaves.

Fill in the middle of the figure.

Glue the green leaves left after processing the tape with a soldering iron, with stamens, to the bottom of the flower.

Collect the stamens in a bundle and bend in the center.

Glue the piece to the bottom ring to complete the bouquet.

The resulting eight kanzashi is an independent gift, you can make it in the form of a fridge magnet.

It will also look very nice accessory on a box with a gift. Such a product is always in demand and relevant, because International Women's Day is a long-awaited spring holiday.

Good luck with your creativity!

We need to make magnets:
extruded (dense) foam (you can use thick cardboard from the box) in the form of an eight (diameter of circles 4 and 5 cm);
satin ribbons 0.8 or 1 cm;
leaves and twigs,
berries;
artificial flowers;
beads;
magnets;
glue gun and cartridges for it;
good mood!!!

Let's prepare the preparation.
To do this, I first cut the pieces of extruded foam of the required size in half lengthwise, since it is very thick for a magnet - 20mm.

Then, according to a pre-prepared template, I cut out figures in the form of an eight.

I sand a little with sandpaper to correct the bumps.

Now you can start decorating the magnet. To begin with, I wrap a satin ribbon in a circle. Periodically, it is necessary to glue the tape on the back side for better fastening. At the junction, you will have to sweat a little to make it look beautiful.

We will prepare decorative leaves, flowers, berries, beads and everything your heart desires and what is available)

We begin to glue the flowers and leaves to the base using hot glue. Glue in a circle or in the middle - as desired.
Add beads, berries and bows)

Glue the magnets - not necessarily in the center, the main thing is that they are not visible, you can try them on in advance.

TO wonderful holiday On March 8, you need to pick up gifts of a flower theme. On this day, it is customary to congratulate women. And they, as you know, love bouquets. The figure eight of kanzashi satin ribbons is an excellent souvenir, a spring accessory that any representative of the fairer sex will appreciate.

If you are faced with the problem of a gift for a teacher or teacher, your girlfriend or girlfriend, mother or grandmother, use the recommendations below. From satin ribbons, you can make a beautiful and delicate figure eight, decorate the accessory with spring flowers, for example, snowdrops.

To repeat the spring fantasy you will need:

thick cardboard and red satin ribbon for its ennoblement, 1 cm wide. The length of the tape strip is 3.5 meters;
gold beads on a thread or tire;
glue, compasses, scissors.

To create delicate snowdrops:

42 pieces of satin ribbon white color- 1.2 * 2.5 cm;
21 pieces of green satin ribbon - 1.2 * 2.5 cm;
14 bilateral stamens yellow color(2 pieces for each flower);
8 double-sided green stamens (for the overall composition).

For the bow:

2 pieces of purple ribbon - 2.5 * 5 cm;
5 pieces of golden brocade (2 pieces - for a bow, 1 piece - braid the middle, 2 pieces - for ponytails) - 0.5 * 5 cm;
2 pieces of purple ribbon (for batik tails) -0.5 * 5 cm.

Stages of making kanzashi crafts for March 8:

Using a compass, any round objects, or simply freehand draw rings on the cardboard. Cut them out. Use either very small nail scissors or a utility knife to make the center holes. It is better to make a figure eight from separate circles, so that in the future it would be convenient to cover the cardboard with a uniform satin layer.

Wrap a red ribbon in a dense layer on the prepared rings. One ring should be slightly smaller than the other or the same.

Glue the two pieces together to form an 8.

Also, in addition, the red rings of the central base can be decorated along the contour with beads on a thread or stripes of a golden tire. Glue on the border to make the figure eight shine.

Next, move on to the painstaking work of creating very delicate little snowdrop flowers. Take pieces of white ribbon for the petals, green for the sepals, and yellow-headed stamens for the middle. Round the white stripes with small scissors on one side, on the opposite side - collect the fold. Do the same with green stripes, but do not round the segments, but cut them with a corner. Collect the stamens in bunches (4 heads each). Repeat these operations with all white and green stripes, yellow stamens.

Glue 6 white petals into the snowdrop head. Connect two double-sided stamens with glue, glue 3 white petals on them, then in a checkerboard pattern - the remaining three. Stepping back a little, glue the green petals, also in a checkerboard pattern. Yellow balls should only slightly peek out from under the white petals.

Make 7 identical snowdrop flowers.

Start gluing the buds with a spikelet of eight, decorating with green stamens. Start at the top ring and work your way down to a neat curl.

Glue all 7 buds and green stamens.

When the flowering spikelet is ready, glue the bow. Prepare wide purple satin stripes and thin golden brocade stripes. Apply gold to the center of the satin.

Close the ends of the tape, leaving the wrong side inside. Burn and glue. Prepare a thin golden brocade strip to decorate the center section.

Braid the middle of the bow. Make a double ponytail with thin purple and gold pieces.

In today's Master Class, we would like to show and tell you how to make a magnet for March 8 with your own hands from satin ribbons and cardboard, while spending a minimum of money and time. In this article you will find detailed description and a scheme for making this souvenir.

To make a magnet from satin ribbons, we need the following materials:

- Blue satin ribbon 2 cm long;
- Caral or red satin ribbon 5 centimeters long;
- Green satin ribbon 5 centimeters long;
- White beads;
- Cardboard;
- Scissors;
- Hot glue gun;
— Magnet;
- Hairspray (super fixation).

Let's start making a magnet:

To begin with, cut out a piece in the shape of a number from a sheet of thick cardboard. You can draw by hand or use a compass.

After the part is ready, we cut out squares of 5 by 5 centimeters from the coral ribbon. We make petals out of them. We need 10 of these petals. From tape Green colour we make leaves.

Glue the petals into a flower and attach with hot glue gun to the main part.

We also glue the leaves to the part.

After that, we decorate ours with beads. You can do this at your discretion and show imagination. The magnet can also be sprinkled with glitter.

When the part is almost ready, glue it to it. It is best to take thin and not very heavy.

Our souvenir is ready, it remains only to fix it with hairspray so that it can last longer and keep its shape.

In today's master class, you learned how to make a fridge magnet out of cardboard and satin ribbons. You can place this magnet on your refrigerator or give it to someone on March 8th.

Do you want to give a dear woman a whole basket of flowers on International Women's Day? But you can make such a luxurious gift with your own hands. A wonderful kanzashi technique will help in this, which involves modeling floral ornaments from satin ribbons. Not necessarily a basket of flowers should be large and fragrant with lively aromas, it can be made cute and miniature in the form of a fridge magnet. This is a wonderful souvenir that will decorate the interior of the hostess' kitchen.

This master class provides a detailed guide on how to create such a refrigerator magnet for March 8 with kanzashi flowers.

To make a flat basket you will need:

template and base cardboard (preferably very dense or folded in several layers);
2 pieces of white rep ribbon measuring 4 * 10 cm;
1 piece of red lace texture "Rhombic" 10 cm long;
2 gold tire clippings 20 cm and 5 cm;
1 piece of red grosgrain ribbon measuring 1 * 20 cm (for the handle).

For flower filling of a basket of 9 crocuses you will need:

25 pieces of gold ribbon measuring 1.2 * 2 cm;
20 pieces of purple ribbon measuring 1.2 * 2 cm;
35-40 pieces of green tape measuring 1.2 * 2.5 cm;
12 unilateral yellow stamens;
15 one-sided lilac stamens.

Stages of manufacturing a kanzashi magnet:

To make an imitation of a basket, you can use rep ribbon, lace ribbon and cardboard, all sizes are indicated in the list of accessories. But they can be increased to get a larger gift. Cut out a trapezoid from cardboard - the body of the basket. The height of the part is 4 cm, the lengths of the upper and lower sides are 8 cm and 5 cm. The trapezoid must be turned over with the larger side up.

Stick a white rep ribbon on the front, duplicate it with red lace on top. Glue a gold tire to the bottom (at the base).

Bend the ends of the tape at the back and glue it to the cardboard.

Cut out the red ribbon to imitate the handle of the basket. Duplicate it with a golden tire. Such a trick is necessary not only for beauty, but also for strength, the tire will not allow the soft tape to sag.

At the back, cover the cardboard with the second part of the white rep tape to hide the place where the ends of the tapes are glued. Basket - the basis of the congratulatory composition is ready.

Prepare also bright ribbon for flowers and greenery and also stamens in two shades.

One crocus bud will consist of five simple rounded petals. For modeling, you will need a gold and purple satin ribbon measuring 1.2 by 2 cm. Cut out all the details and singe the ends.

With manicure, slightly curved scissors, round one end of each future petal. Scorch the rounded part again so that the satin melts slightly and curves. Also, for each bud, three heads of stamens should be prepared, collecting parts by color.

Model 5 petals in a fan, glue a bunch of stamens into the center, then bend into a bud. To obtain interesting effect, you can simulate golden stamens with purple flowers, and purple stamens with gold (invert colors).

Prepare green segments for the leaves. Cut out sharp triangles by folding each in half lengthwise, then cutting at an angle.

To model a lush bouquet, it is enough to make 9 crocuses and green leaves from all prepared segments.

Glue a few leaves (about 5 pieces) with the base to the back of the basket and bend down so that they seem to hang down. Make sure the front side is visible.