We make flowers from foamiran - a two-color ranunculus. How to make ranunculus from foamiran Ranunculus from foamiran

Delicate ranunculus from foamiran is able to decorate any bouquet. Many people know beautiful flower ranunculus, from which chic bouquets are created. There are many varieties of such a flower, and each has its own zest. There are ranunculi that look like peonies, and there is an Asian variety of a flower. By and large, each flower needs its own template, its own pattern, and hence its own master class.

Asian ranunculus is a delicate, beautiful, and not very difficult flower to make. If you have already worked with foamiran (or, as it is called otherwise, plastic suede), then you know about its properties and methods for forming petals. If you haven't worked with the material yet, practice. The fact is that the manufacture of a flower is a delicate work, and in this matter at least the primary skills of working with the material are needed.

To make an Asian ranunculus, you need:

• Olive and white foam;
• Pastel lemon, light pink, olive, pink;
• Blending sponge;
• Second glue;
• Foil;
• Scissors;
• Wire;
• Hairpin, elastic band or blank for a brooch.

Asian foamiran ranunculus is made quite simply

Next you need to print ready-made patterns or draw them yourself. Tips can be seen in the photo gallery. Usually there are three types of petal patterns, there will be from 11 to 21 pieces for each pattern. You will also need a sepal pattern.

If you made the patterns yourself, and when assembling the flower, it turned out to be what you need, be sure to save these patterns for future work. Or patterns successfully printed from the Internet - save them too, so as not to complicate your work in the future. Patterns need to be transferred to the material - either a stroke with a toothpick or an empty (not writing) ballpoint pen will help with this.

According to the pattern, petals are cut out of white plastic suede, and an olive suede sepal. After that, the petals cut out according to the first pattern must be tinted with olive oil pastels. Tone on both sides, blending well.

Necessary elements for ranunculus from foamiran

Petals made according to the second and third patterns are tinted with lemon pastel on both sides. And the petals made according to the 4th pattern are tinted on both sides with a pale pink pastel. The largest petals are tinted with pink pastel.

After tinting, the petals are heated on an iron (temperature regime - silk-wool), after which it would be nice to process them with a bulk. A ball is formed from a piece of foil, which is strung on a wire. A ball of foil is wrapped in lemon foamiran.

Beauty from foamiran: ranunculus flower, formation

And then, when each detail is warmed up and formed, you can form a flower. Make sure not a single petal is left unattended. Since foamiran easily remembers the shape that your fingers give it, be careful in your work.

• First, the smallest olive-colored petals are taken, the base is pasted over with it - the petals are glued so that the base is slightly visible;
• The petals are glued overlapping on the half of the petal;
• After that, with a downward shift of 2 mm, the petals of the second template are glued, and also overlapped;
• The petals of the third template are glued 2 mm lower, glue is applied to the first petal on one side, 7 petals are glued in one row, the last petal is wound under the first;
• The next row of petals of the third template - and this is another 8 petals, are glued on the same level with the first row of petals of the third template, and this is glued with an overlap of 1 cm;
• The petals of the fourth template are also glued in two rows - 10 petals are glued in one row, 11 petals in the second row;
• The petals are aligned along the edge, it is better to apply glue to the tips of the petals;
• The petals of the fifth template are glued to the very bottom, 7 petals are glued in total, after which the rest are glued between the petals of the previous row with a shift of 2 mm, with a minimum overlap.

The process of forming a ranunculus flower from foamiran

After that, the sepal is glued. The glue is applied to the very middle, and the rays do not need to be glued. The flower is ready, it remains only to choose a mount and fix the flower on it. It can be an elastic band, a hairpin, a brooch or a blank for a headband.

From the materials you will need all the same. The color of foamiran is at your discretion. Usually white foamiran and olive and pink oil pastels are taken.

The pattern will be easy to do on your own. In this case, these will not be individual petals, but petal circles. You will need four types of circles - 2 pieces of type A (the largest), 2 pieces of type B, 4 pieces of type C, 8 pieces of type D (the smallest). You will need a leaf template, according to which 3 parts are cut out, and 3 sepals.

Persian ranunculus from foamiran looks very impressive

• Cut out petal circles, make all the details (and even leaves) from white foamiran, as well as sepals;
• Then the petal circles are tinted - small petal circles with olive pastel, large petal circles with pink oil pastel;
• The leaves are tinted with olive and green pastels;
• All petal circles are processed in the same way - they are heated on the iron at the “silk-wool” temperature, each petal is processed with a bulk;
• The sepals are heated on the iron, rubbed between the fingers, then straightened out;
• Well, then a familiar scheme - a ball of foil and wire;
• The base is treated with olive foamiran;
• Petal circles are gradually glued, starting with the greenest and smallest.

Then the sepals are glued and the wire is processed with teip tape. Litons are glued to the leaves. Litona is also pasted over with teip tape, so a twig is assembled.

These beautiful ranunculus are obtained from inexpensive and affordable foamiran material. Instead of pastels sometimes use artistic acrylic paints. In any case, the work requires accuracy and diligence.

From cardboard we cut out patterns of four sizes in the form of a drop

Using patterns from foamiran, we cut out the petals of the ranunculus. Choose a color for each size. We circle the pattern on Thomas not with a pencil, but with nail scissors so that there are no traces left. Then cut out.

Alternately apply each petal for a few seconds to a hot iron and, while it is warm, thumbs hands stretch it from the middle to the edges, making it convex.

We do the same with all the petals. Now our petals resemble boats.

From yellow foamiran we cut a small strip for the middle of the flower. One of its long edges is cut into noodles. We take a bunch of white stamens and with hot glue we glue it in a circle with a yellow strip with noodles. Next, we attach the first layer of the smallest petals (yellow).

Now we glue another layer of petals a little bigger size- beige.

The next layer is even larger petals (light lilac). We glue them in such a way that each subsequent one goes a little on the previous one.

The last layer is the largest purple petals.

You can make the ranunculus more magnificent by gluing several layers of large and medium petals.
From satin ribbon cut out a pointed leaf and a rosette for a flower. So that their edges do not stick out, we burn them with a lighter or a candle. We bring the sheet to the flame not too close, because the delicate fabric is very easy to simply burn. If you are not experienced in making flowers and leaves from cloth using the flame-fired method, it may be worth using ready-made leaves, which you can buy at a craft store. We glue the socket to the base of the flower, and the leaf to the wire stem on which the berry is attached.

We weave the wire stems of berries and stamens with the stem of the flower, we get such a bouquet.

Now we twist all the stems into a ring and fasten with hot glue to the metal base for the brooch.

The product is ready to become a wonderful addition to fashionable image, because ranunculus flowers have a very beautiful bud structure and color. They have become very popular with artists, jewelers and designers, providing inspiration for wonderful paintings, exquisite clothing and jewelry.

How to make ranunculus from foamiran

Delicate ranunculus from foamiran is able to decorate any bouquet Many people know the beautiful ranunculus flower, from which chic bouquets are created. There are many varieties of such a flower, and each has its own zest. There are ranunculi that look like peonies, and there is an Asian variety of a flower. By and large, each flower needs its own template, its own pattern, and hence its own master class.

Asian ranunculus from foamiran: MK

Asian ranunculus is a delicate, beautiful, and not very difficult flower to make. If you have already worked with foamiran (or, as it is called otherwise, plastic suede), then you know about its properties and methods for forming petals. If you haven't worked with the material yet, practice. The fact is that the manufacture of a flower is a delicate work, and in this matter at least the primary skills of working with the material are needed.

To make an Asian ranunculus, you need:

• Olive and white foam;
• Pastel lemon, light pink, olive, pink;
• Blending sponge;
• Second glue;
• Foil;
• Scissors;
• Wire;
• Hairpin, elastic band or blank for a brooch.

Asian foamiran ranunculus is made quite simply

Next, you need to print ready-made patterns or draw them yourself. Tips can be seen in the photo gallery. Usually there are three types of petal patterns, there will be from 11 to 21 pieces for each pattern. You will also need a sepal pattern.

Patterns: ranunculus from foamiran

If you made the patterns yourself, and when assembling the flower, it turned out to be what you need, be sure to save these patterns for future work. Or patterns successfully printed from the Internet - save them too, so as not to complicate your work in the future. Patterns need to be transferred to the material - either a stroke with a toothpick or an empty (not writing) ballpoint pen will help with this.

According to the pattern, petals are cut from white plastic suede, and a sepal from olive suede. After that, the petals cut out according to the first pattern must be tinted with olive oil pastels. Tone on both sides, blending well.

Necessary elements for ranunculus from foamiran

Petals made according to the second and third patterns are tinted with lemon pastel on both sides. And the petals made according to the 4th pattern are tinted on both sides with a pale pink pastel. The largest petals are tinted with pink pastel.

After tinting, the petals are heated on an iron (temperature regime - silk-wool), after which it would be nice to process them with a bulk. A ball is formed from a piece of foil, which is strung on a wire. A ball of foil is wrapped in lemon foamiran.

Beauty from foamiran: ranunculus flower, formation

And then, when each detail is warmed up and formed, you can form a flower. Make sure not a single petal is left unattended. Since foamiran easily remembers the shape that your fingers give it, be careful in your work.

• First, the smallest olive-colored petals are taken, the base is pasted over with it - the petals are glued so that the base is slightly visible;
• The petals are glued overlapping on the half of the petal;
• After that, with a downward shift of 2 mm, the petals of the second template are glued, and also overlapped;
• The petals of the third template are glued 2 mm lower, glue is applied to the first petal on one side, 7 petals are glued in one row, the last petal is wound under the first;
• The next row of petals of the third template - and this is another 8 petals, are glued on the same level with the first row of petals of the third template, and this is glued with an overlap of 1 cm;
• The petals of the fourth template are also glued in two rows - 10 petals are glued in one row, 11 petals in the second row;
• The petals are aligned along the edge, it is better to apply glue to the tips of the petals;
• The petals of the fifth template are glued to the very bottom, 7 petals are glued in total, after which the rest are glued between the petals of the previous row with a shift of 2 mm, with a minimum overlap.

The process of forming a ranunculus flower from foamiran

After that, the sepal is glued. The glue is applied to the very middle, and the rays do not need to be glued. The flower is ready, it remains only to choose a mount and fix the flower on it. It can be an elastic band, a hairpin, a brooch or a blank for a headband.

Persian rununculus from foamiran: master class

From the materials you will need all the same. The color of foamiran is at your discretion. Usually white foamiran and olive and pink oil pastels are taken.

The pattern will be easy to do on your own. In this case, these will not be individual petals, but petal circles. You will need four types of circles - 2 pieces of type A (the largest), 2 pieces of type B, 4 pieces of type C, 8 pieces of type D (the smallest). You will need a leaf template, according to which 3 parts are cut out, and 3 sepals.

Persian ranunculus from foamiran looks very impressive

Progress:

• Cut out petal circles, make all the details (and even leaves) from white foamiran, as well as sepals;
• Then the petal circles are tinted - small petal circles with olive pastel, large petal circles with pink oil pastel;
• The leaves are tinted with olive and green pastels;
• All petal circles are processed in the same way - they are heated on the iron at the “silk-wool” temperature, each petal is processed with a bulk;
• The sepals are heated on the iron, rubbed between the fingers, then straightened out;
• Well, then a familiar scheme - a ball of foil and wire;
• The base is treated with olive foamiran;
• Petal circles are gradually glued, starting with the greenest and smallest.

Then the sepals are glued and the wire is processed with teip tape. Litons are glued to the leaves. Litona is also pasted over with teip tape, so a twig is assembled.

Diversify your flower arrangements You can use foamiran flowers. Those who are already familiar with this material know about all its advantages, those who hear about it for the first time can read in and purchase in the "Foamiran" section.

However, a great many beautiful and unusual flowers can be made from foamiran, and in this master class I will focus on a ranunculus flower or a garden buttercup, which I immediately fell in love with for its lightness, lightness and the ability to combine several tasty and bright colors. This type of flower can easily be used to decorate headbands, boutonnieres, bracelets, brooches and more. This flower was used in my work comb "Ranunculus".

We will need the following materials and tools:

1. Foamiran of any two colors;
2. Scissors of two types;
3. The basis for a flower on a leg;
4. Leaf template, two sizes;
5. Glue gun;
6. Bulka;
7. Iron.

Description and order of work on the creation of a brooch.

1) We put aside everything superfluous and leave only foamiran of the same color, two templates for the petals and two pairs of scissors.
2) We cut the blanks of our future leaves from foamiran. The size of a small leaf is 2.5 by 2 cm. We need 4 such leaves of a light lemon color. The second size is 3 by 2 cm. We need 12 such leaves.
3) We take small leaves and begin to form uneven edges for each leaf.
4) We do this with all the leaves of two sizes.
5) We take a bright yellow foamiran and cut out 4 small petals and 6 petals from it. big size. We process the edges, making them uneven.
6) We proceed to the second part of our master class ranunculus from foamiran. We take an iron and a bulka measuring 1 cm.
7) We take one petal and apply it to a heated iron for a few seconds so that the leaf absorbs heat and becomes more plastic.
8) We take the bulb, put the petal on the palm of our hand and begin, as it were, to press the middle and edges of the petal. All this must be done very quickly, until our leaf has had time to cool.
9) It turns out here is such a concave petal, which is very similar to the real one.
10) We do the same with all the leaves of two colors and two sizes.
11) The third part of the master class is the formation of a ranunculus bud from foamiran. We take all our petals glue gun and a flower center.
12) We glue the tip of the petal with glue and glue it to the base of our future flower.
13) So glue all 4 small petals of light lemon color. We already have a small bud.
14) We take 4 petals brightly yellow color and glue them to our bud so that the petals are staggered in relation to the first row.
16) Now glue the remaining 12 large petals of light lemon color.
17) We have a nice, lush, bicolor ranunculus bud.

You can decorate a flower with leaves that we learned to make in a master class "

Delicate ranunculus from foamiran is able to decorate any bouquet. Many people know the beautiful ranunculus flower, from which chic bouquets are created. There are many varieties of such a flower, and each has its own zest. There are ranunculi that look like peonies, and there is an Asian variety of a flower. By and large, each flower needs its own template, its own pattern, and hence its own master class.

Asian ranunculus is a delicate, beautiful, and not very difficult flower to make. If you have already worked with foamiran (or, as it is called otherwise, plastic suede), then you know about its properties and methods for forming petals. If you haven't worked with the material yet, practice. The fact is that the manufacture of a flower is a delicate work, and in this matter at least the primary skills of working with the material are needed.

To make an Asian ranunculus, you need:

• Olive and white foam;
• Pastel lemon, light pink, olive, pink;
• Blending sponge;
• Second glue;
• Foil;
• Scissors;
• Wire;
• Hairpin, elastic band or blank for a brooch.

Asian foamiran ranunculus is made quite simply

Next, you need to print ready-made patterns or draw them yourself. Tips can be seen in the photo gallery. Usually there are three types of petal patterns, there will be from 11 to 21 pieces for each pattern. You will also need a sepal pattern.

If you made the patterns yourself, and when assembling the flower, it turned out to be what you need, be sure to save these patterns for future work. Or patterns successfully printed from the Internet - save them too, so as not to complicate your work in the future. Patterns need to be transferred to the material - either a stroke with a toothpick or an empty (not writing) ballpoint pen will help with this.

According to the pattern, petals are cut from white plastic suede, and a sepal from olive suede. After that, the petals cut out according to the first pattern must be tinted with olive oil pastels. Tone on both sides, blending well.

Necessary elements for ranunculus from foamiran

Petals made according to the second and third patterns are tinted with lemon pastel on both sides. And the petals made according to the 4th pattern are tinted on both sides with a pale pink pastel. The largest petals are tinted with pink pastel.

After tinting, the petals are heated on an iron (temperature regime - silk-wool), after which it would be nice to process them with a bulk. A ball is formed from a piece of foil, which is strung on a wire. A ball of foil is wrapped in lemon foamiran.

Beauty from foamiran: ranunculus flower, formation

And then, when each detail is warmed up and formed, you can form a flower. Make sure not a single petal is left unattended. Since foamiran easily remembers the shape that your fingers give it, be careful in your work.

• First, the smallest olive-colored petals are taken, the base is pasted over with it - the petals are glued so that the base is slightly visible;
• The petals are glued overlapping on the half of the petal;
• After that, with a downward shift of 2 mm, the petals of the second template are glued, and also overlapped;
• The petals of the third template are glued 2 mm lower, glue is applied to the first petal on one side, 7 petals are glued in one row, the last petal is wound under the first;
• The next row of petals of the third template - and this is another 8 petals, are glued on the same level with the first row of petals of the third template, and this is glued with an overlap of 1 cm;
• The petals of the fourth template are also glued in two rows - 10 petals are glued in one row, 11 petals in the second row;
• The petals are aligned along the edge, it is better to apply glue to the tips of the petals;
• The petals of the fifth template are glued to the very bottom, 7 petals are glued in total, after which the rest are glued between the petals of the previous row with a shift of 2 mm, with a minimum overlap.

The process of forming a ranunculus flower from foamiran

After that, the sepal is glued. The glue is applied to the very middle, and the rays do not need to be glued. The flower is ready, it remains only to choose a mount and fix the flower on it. It can be an elastic band, a hairpin, a brooch or a blank for a headband.

From the materials you will need all the same. The color of foamiran is at your discretion. Usually white foamiran and olive and pink oil pastels are taken.

The pattern will be easy to do on your own. In this case, these will not be individual petals, but petal circles. You will need four types of circles - 2 pieces of type A (the largest), 2 pieces of type B, 4 pieces of type C, 8 pieces of type D (the smallest). You will need a leaf template, according to which 3 parts are cut out, and 3 sepals.

Persian ranunculus from foamiran looks very impressive

• Cut out petal circles, make all the details (and even leaves) from white foamiran, as well as sepals;
• Then the petal circles are tinted - small petal circles with olive pastel, large petal circles with pink oil pastel;
• The leaves are tinted with olive and green pastels;
• All petal circles are processed in the same way - they are heated on the iron at the “silk-wool” temperature, each petal is processed with a bulk;
• The sepals are heated on the iron, rubbed between the fingers, then straightened out;
• Well, then a familiar scheme - a ball of foil and wire;
• The base is treated with olive foamiran;
• Petal circles are gradually glued, starting with the greenest and smallest.

Then the sepals are glued and the wire is processed with teip tape. Litons are glued to the leaves. Litona is also pasted over with teip tape, so a twig is assembled.

These beautiful ranunculus are obtained from inexpensive and affordable foamiran material. Instead of pastels, artistic acrylic paints are sometimes used. In any case, the work requires accuracy and diligence.