How to make hairpins from felt with your own hands. An elegant flower made of felt in the form of a peony for decorating a hairpin or a hoop Do-it-yourself felt hairpins lessons

A piece of felt, threads and a free evening. If you combine all this, you get a beautiful decorative element for accessories.

In order to successfully choose a hairpin or brooch by color and texture, you need to grab a needle and create an unusual, one and only flower from felt with your own hands. You will need a couple of hours of time and the ability to make simple stitches. Felt is a material that is easy and pleasant to work with, it does not crumble and is easily cut. In this master class detailed instructions with a photo of how to make a voluminous pink flower, with leaf bends resembling a peony.

Materials and tools for the master class

To make a felt peony, prepare:

• thin felt 1.2 mm in two shades of pink - half a sheet of each color;
• threads to match felt;
• a bead of white or pink color;
• needle;
• sharp scissors;
• ruler;
• wax crayon for marking.

Felt can be bought at craft and craft stores, it is sold in sets and is inexpensive.

Peony making process

It’s easier than with leather and, therefore, we invite not only adult needlewomen, but also our youngest readers, who modestly stand behind their mothers. Girls, you can do it!

Mark the details: with wax crayon, draw on dark pink felt three strips 3.5 cm wide and two circles for the base with a diameter of about 5.5 cm (you can use a cap of a suitable size for the template), on light pink felt - three strips 3 wide cm.

Cut out the details without striving for the ideal, as the edges will be processed again.

From dark pink strips, cut rectangles 4 cm long, and from pink strips - 3.5 cm long. For a peony, you will need about 10 large petals and 8 smaller ones, but it is better to make petals with a margin so as not to be distracted by cutting during the assembly of the product. Now we need to work on each petal, this will require good sharp scissors. For each rectangle on one of the narrow sides, make a curved edge - a little wave, a little zigzag, somewhere in the form of a finger, the pattern does not repeat, so the flower will be more magnificent and more like a real one. You can cut the petals in pairs.

Fold each petal with an envelope from below so that it becomes voluminous, grab it with two stitches.

Sew the petal to the base so that it peeks out two-thirds. Sew the next petal close, while straightening.

Sew all the dark pink petals in a circle, trying to make an even circle inside.

Fold the light pink petals in the same way, sewing them, as it were, between the petals of the previous row in a checkerboard pattern, fixing them with a couple of stitches at the very base, they will cover the attachment point of the first row of the felt flower.

Complete the second circle, in the middle an even circle is formed.

For the middle, cut out a light pink rectangle 1.5 cm wide and about 14-16 cm long. Make a wavy uneven edge with scissors. Gather the part into an accordion.

Roll up with a snail, fastening with a couple of stitches with each turn.

Sew the core to the center of the flower and fasten the bead.

Under the bead, you can make stamens from white felt.

From the scraps, open a rectangle for the clasp, sew on the buttons and attach the base with an overcast seam, covering the attachment points of the petals.

You can make a mount with a button or just in the form of a loop.

Felt peony can be attached to any kind of hairpin.

Another decoration is not difficult to fix on a hair hoop.

Due to the fact that the felt flower is made with a button fastener, it can be attached not only to a hairpin and a hoop, but also to a bag, to a loop on a jacket, to a beret. You can, for example, decorate for yourself and your little daughter in the same style and spend a minimum of effort and money on it, such a decorative element will definitely come in handy at a photo shoot.

Try also making bright and small violets to decorate the beret. We still have a lot of interesting information, stay with us in in social networks so you don't miss new posts!

A master class on creating a flower from felt with her own hands was prepared by Stanislav Pichugin especially for the site "Women's Hobbies".

This tutorial was created Purl Soho and Purl Bee. All rights to the pattern and model are protected by copyright law. Neither the template nor products derived from it may be used for sale. You can find the original tutorial on Purl Bee. It was translated by me (Anastasia) from English into Russian.

Purl Soho and Purl Bee cannot verify the accuracy of this translation, but should you have any questions, they are always happy to answer them at English language on www.purlbee.com

Materials for work:

1. Felt set (different tones of red, orange, brown, pink)
2. Thread and needle for stitching details
3. Click-clack hairpin set
4. Rose pattern ( download)

The process of creating hairpins from felt

First, cut out the pattern pieces from paper and transfer them to the felt. You should have 5 different parts.

• One ribbon with a wavy edge in color "A" (we will make a rosebud from it). In this case, the color is red.
• One five-leaf flower "A" color
• One quatrefoil color "A"
• The top of the hairpin in the color "B" (pink is taken here)
• The bottom of the hairpin in the colors "A" with a small horizontal slit (marked on the pattern)

Rosebud

Carefully roll the ribbon into a roll, starting at the smaller end (marked "Center" on the pattern). The rosebud is almost ready!

Choose a thread to match. Sew the center of the bottom of the bud with a few tight stitches. Make sure that all layers are captured during stitching.

Rotate the bud 90 degrees and stitch again through all layers, perpendicular to the previous one. You can sew a couple of times in one place so that the stitches hold well.

Tie a knot and cut off the excess thread. The work on the button is finished!

Felt rose petals

Sew the four-leaf to the bottom of the bud, as shown in the photo.

Grab two adjacent petals with a thread. When making a stitch, grab the side of the bud.

Sew all adjacent petals in this way.

Repeat the same for the pentacle.

Well, that's all - a rose in all its glory! As you can see, it’s not at all difficult to do, but they are charming in all their variations. Now you can use it as a decoration for clothes, for home or make a hairpin out of it. What I suggest to do =)

.

DIY hairpin

Thread a regular hairpin through the hole on one of the parts of the felt pattern.

Sew the other part (pink) to the rosette.

To make a new hair clip, an inexpensive, easy-to-work and bright material - felt - is useful. You will not need special skills to work with felt, it is enough to master the school curriculum for labor training and you can easily make a new accessory with your own hands. Spend just a little time and imagination to treat yourself or your girlfriend. See below detailed photo Master Class DIY felt hairpin from site.

Materials for do-it-yourself felt hairpins:

• Felt in three colors.
• Glue (suitable for fabric).
• Mouline thread in tone.
• Sewing needle with a wide eye.
• Scissors.
• Disappearing marker.
• Beads (halves).
• The basis for the hairpin.
• Patterns of flowers (the same shape, but different sizes).

How to make a hairpin out of felt with your own hands?

To make a felt hairpin, you first need to cut out the details. The dominant color will be yellow. We take a smaller pattern. We put it on a piece of yellow felt, circle it with a marker.

We do the same with a large pattern, cut out the part bigger size different color.

If the lines came out not very neat, it doesn't matter. The trace from the marker will disappear in a couple of hours.

We combine the layers, creating a composition.

So far, nothing needs to be glued, just trying it on, will it work beautiful product from felt.

The felt material is a bit monotonous, let's give it some liveliness by embroidering veins on the petals. To do this, use floss threads, you can match, but better contrast. We separate a double thread from the skein, we bring it out from the inside.

We pass the tail under the first stitch.

We pass the thread through all the petals, each with 4 stitches. We try to make them the same length.

The next step is to decorate the top flower. I like to decorate with beads. First we select the beads suitable color, then lay out, as if outlining the future drawing. Only after that we glue.

Now you can collect the product. We fasten the parts of the future hairpin.

Felt is very easy to glue, it is fleecy, it is enough to apply a drop of glue, combine the layers and press for a few seconds.

A felt flower must be attached to the base for the hair clip. It has holes for fastening. But you can do it simply with glue, if you are sure of its quality. Many compositions are suitable for metal and fabric. Pour plenty of glue on the base, apply a flower and press along the entire length.

Looking at the hairpin, I decided that something was missing. I drew a couple of petals by hand, cut them out. But I decided to fix it not at the very bottom, but between the upper and lower tiers.

A felt hairpin can be made in different options: plain or multi-color, from 1 - 3 layers or more, with or without petals.

The arrangement of beads and stitches, as well as their types, can also be different. Good luck with your creativity!

Felt is a very popular material often used in needlework. Due to the dense structure of this material, the range of products is very diverse. Many needlewomen like to make original hairpins for adults and children from colored felt.

This material is completely unpretentious in work. It does not have a front and back side, the edges do not crumble. Details can be sewn both manually and on a sewing machine.

Reference! Felt is a non-woven material produced by felting from the down of rabbits, hares and goats. The composition of such a material may be different, since in modern industry felt is made with the addition of various synthetic fibers.

It is easy to make beautiful and unusual hair clips from this material. To do this, you can, for example, use the patterns below.

Hairpin with flowers

Felt decorations in the shape of flowers look very nice. You can make such an accessory using the proposed step-by-step guide.

materials

To make an elegant accessory with flowers you need to cook:

• pieces of thin felt in white, light green and dark green;
• light pink art marker;
• beads of different diameters;
• silk floss threads of a shade of green moss;
• scissors;
• base for hairpins;
• glue gun capable of operating at a minimum heating temperature.

Stages of work

• On paper, you should draw patterns for leaves and petals for a flower (you can use a ready-made version downloaded from the Internet).
• To make one flower, you should cut out 4 large petals with wavy edges, 8 small drop-shaped petals, 2 small light green and 2 large dark green leaves from felt.
• Along the edges of the petals white color you need to walk a little with a marker to get a beautiful pink border.
• From the skein of threads, you need to cut off a long part and then fold it so that the length of each thread is no more than 5 cm. On the one hand, the threads should be tied with a strong knot, and on the other, carefully cut all the resulting loops. This will be the blank for the stamens.
• 4 large petals must be glued to the base of the stamens (directly to the node), evenly placing them around the circumference.
• Four white petals should be pasted over a bead made of wood so that an unopened bud is formed. In the same way, you need to form a second bud.
• Each green leaf must be glued at the base so that the opposite tips are in contact with each other. Thanks to this, the leaves will acquire additional volume and a more natural look.
• Now you can collect flower arrangement in the desired order and glue to the base of the hairpins.

Hairpins with animals made of felt for children

For children, you can make funny decorations in the form of animals.

They can be found in coloring books, copied from a book or printed from the Internet.

materials

To make chanterelle, bunny or bear hairpins, you need to prepare:

• multi-colored patches of felt;
• beads or small beads for the eye;
• threads for connecting parts;
• tailor's pins;
• hairpins "duck" or large "invisible";
• cotton wool or synthetic winterizer;
• glue.

Stages of work

1. You need to print the suggested version of the template. Where the number 2 is indicated on the template, 2 parts must be made. All paper elements should be cut out, put on felt and secured with pins.
2. Now you need to draw a muzzle. To do this, you can glue or sew on the ears, nose, cheeks and eyes of beads. Then embroider a mouth and sew on flowers.
3. On the muzzle designed in this way, it is necessary to impose a second piece of felt. With small overcasting stitches, it is necessary to sew 2 parts of the product, leaving only a small hole. Felt must be sewn or glued to the hairpin. A cute accessory is ready.

Butterfly hairpin

Another easy to do and very beautiful option felt hairpin.

materials

To create such products you will need:

• colored and white pieces of felt;
• hairpins "invisible";
• thread with a needle.

Stages of work

1. First you need cut out two blanks for each butterfly from the prepared material: one color and one openwork white for the bottom.
2. The white part must be threaded through the center into the invisible hairpin, and covered with a colored part located on top of the hairpin.
3. Both parts of the butterfly should be fastened by stitching them with threads, as shown in the photo. A beautiful felt butterfly hair clip is ready.

IN Lately felt hairpins became especially popular. And not unreasonably! Felt is not only a beautiful material, but also practical - it does not shrink, the edges do not crumble, it is easy to wash and dries quickly. The process of making a felt hairpin with your own hands can be divided into two parts: making jewelry and attaching it to the hairpin.

To make a felt hairpin you will need:

• felt of different colors;
• thread and needle for sewing;
• beads, beads for the core of the flower;
• glue "Moment" or glue gun;
• hairpins.

Making decorations from felt for hairpins

Basically, hairpins are decorated with flowers and felt appliqués. The edges of felt single parts can not be overcast.

Felt flowers can be made in a variety of ways. For example, cut a circle with a diameter of 7-8 cm, cut a strip about 2.5 cm wide in a spiral, twist, sew - this will turn out to be a small rose for a hairpin.

More time consuming to make flowers from individual petals, but the time spent is worth the result.

The technology for making flowers from individual petals is similar - petals of various configurations are cut out, which are then assembled into a flower with a needle and thread or glued with glue gun on a small circle-base (diameter 2-3 cm, depending on the size of the flower and hairpin).

Hairpins with felt applications are very popular with little girls. Still would! After all, you can decorate the hairpin with any character you like from a cartoon or a book. To do this, it is enough to redraw and cut out a picture from paper, cut out details from felt and sew together with contrasting threads or to match the main fabric.

Attaching the felt embellishment to the barrette

You can attach the jewelry to the hairpin in two ways: glue it with universal glue, for example, Moment and Super Glue glue have proven themselves well, or by sewing it with threads to the hairpin. For reliable fastening, you can combine these two methods - first glue the jewelry to the hairpin, and then fasten it with hand stitches.

After spending half an hour of your personal time, you can easily make felt hair clips with your own hands, not only for yourself and your daughter, but also for friends and their children.