home » School » Original painting made of twine with your own hands. Twine crafts: a step-by-step master class for making useful and beautiful products (95 photos) How to make twine step by step pictures

Original painting made of twine with your own hands. Twine crafts: a step-by-step master class for making useful and beautiful products (95 photos) How to make twine step by step pictures

To create a cozy atmosphere in the house, you can use twine crafts. Twine is a universal thing that goes with almost any decor. Wicker baskets, unusual vases and figurines are just a small part of non-standard little things that you can create with your own hands using jute twine. crafts from jute twine do it yourself distinguished by their originality and originality.

Jute twine and the creation of unusual things

Jute is commonly referred to as packing thread., which is made using special technologies and jute fibers. At first glance, it is no different from ordinary knitting threads, even looking a little rougher. But in the hands of needlewomen, this unremarkable thing begins to transform into cute little things for the interior. You can start your acquaintance with twine products by creating a pretty bow or vase as an example.

DIY creative bow

This will require:

Leg-split.
Tin or glass jar (Its diameter should not exceed 15 cm).
Glue (it is better to take silicone).
Ordinary scissors.

The process of making crafts

The manufacturing process should begin with a simple process of winding a string of twine onto a previously prepared jar. It should be taken into account that all screws must fit snugly. to each other, they must be wound carefully. The width of the product will depend on the number of wound turns.

Then you need to cut the twine. The unfixed end of the twine should be covered with glue and fixed near the last turn. Remember that the twine tends to unravel, so fixing parts with cut edges is required.

The resulting decor element must be set aside and wait for the glue to dry completely.

Then the twine is carefully removed from the can and the product is clamped in the center so that the bow comes out.

The place of inflection for beauty is decorated with twine and fixed with silicone glue.

jute vase

In order to turn a completely unsightly and unnecessary jar into a decor item, you need to spend a little time and quite ordinary materials for work.

So, in order to create a beautiful twine vase at home, you will need:

Bank (tin or glass). You should not take too wide a jar, it is enough that its diameter is 14-15 cm.
Glue.
Scissors.
Glue gun.

The first stage of work is to degrease the can and apply glue to its surface. It is better in this case to use silicone. While the glue is not dry, it is necessary to wind the twine around the jar. Do the job carefully. A tight fit of the coils of the rope must be observed. Winding the thread should start from the bottom of the can and finish with the neck of the bottle.

After the whole product is wrapped, the excess part of it must be cut off with twine, and the tip of the rope must be attached to the last turn on the bank. After the decor has completely dried, the vase is considered ready. The decor element can be left as is or additionally decorate with rhinestones, beads or other natural decor. Give free rein to your imagination. Believe me, an interesting and exclusive piece of furniture will appeal not only to household members, but also to guests.

Basket for paska or fruit made of jute twine

This crafts not only decorate the interior any room, but will also become an indispensable attribute in the kitchen on holidays and weekdays.

In order to make a beautiful rope basket, you need to prepare:

Crochet hook.
Glue.
Plastic jar. Its size will depend on the format of the future basket.
Twine threads.

Manufacturing process

At the top of the plastic mold, you need to cut small strips. They should be located at an equal distance from each other. Such a manipulation can be performed approximately by eye or clearly measured with a ruler. It all depends on the eye of the needlewoman.

Then you can start winding the thread. To do this, twine is placed in each strip, winding the rope in a vertical manner. Basting on the plastic form will prevent the material from slipping.

After the vertical winding is completed, the rest of the twine is cut off, and the free end of the rope is fixed with glue for the reliability of the structure.

After the first stage of work is completed, you can proceed to the second part. The sequence of actions with the plastic form in this case will not change much. It should be borne in mind that in this case, the winding of the thread will have to be performed horizontally. The thread will need to be threaded under each vertical turn, the tightness of the thread in this case is very important. The denser the thread is wound, the more beautiful and stronger the finished product will look. In order to simplify the process of passing horizontal twine through vertical elements, you can use a crochet hook.

The third step is to make the bottom of the basket. To do this, turn the resulting form over so that the bottom is at the top of the basket. Then glue is applied to the threads with which the bottom is braided.

The threads on the bottom of the basket are laid in a circle. The product must dry completely.

In order for the basket to look original and realistic, it is necessary to complete the design of the upper part of the product. To do this, cut the thread in the place where they are intertwined. After that, the twisting of two adjacent edges of the twine is performed. The curl, which turned out as the final result, must be lubricated with silicone glue, and then wrapped in such a way that it turns out rose flower. The decor element must be attached to the twine base.

After the process of processing all the threads, the container will need to be pulled out. An interesting basket is ready. This is how easy and simple you can create an amazing and inexpensive basket in which you can put fruits, various little things or eggs and Easter for the holiday.

To create an interesting interior item in the form of a bird's nest, you will need:

jute twine.
rubber ball.
Napkin.

Manufacturing process

First you need to inflate the balloon. The size of the inflated balloon will depend on the size of the bird's future nest. The larger the ball, the wider the nest will be.

After the rubber ball is inflated, it should be wrapped with jute thread. In this case, the winding must be done in a chaotic manner. Moreover, there must be a gap between the threads. After winding, the end of the thread is hidden by threading it under any nearby thread.

Then all the threads must be impregnated with PVA glue, which is previously diluted with water. It is necessary to dilute the glue so that 2/3 of the composition is occupied by glue, and only 1/3 by water.\\

Excess glue on the surface of the future nest is removed with a napkin or waffle towel.

It is necessary to dry the ball for 24 hours, until it is completely dry. To do this, the ball is suspended by a thread in a warm place.

After the ball has dried completely, it should be pierced and removed from the resulting twine shell.

Then the finished sphere will need to be designed in the form of a bird's nest, simply by cutting off the unnecessary upper part of the ball. The nest can be decorated with various decorative elements. For example, you can stick feathers, small cones and beautiful dried leaves on it. Birds can be placed inside the nest. They are sold in every store for room decor. You can also make wonderful birds yourself from fabric or polymer clay. All stages of work and patterns can be found on the Internet. Decor details must be glued with a glue gun for reliability.

Do-it-yourself twine and burlap crafts are easy and simple to make. In order to create such an interesting piece of furniture as an acorn, you don’t need much. Perfect fit:

Containers yellow color from Kinder. One acorn will equal one container.
Twine rope.
floral wire.
Coffee beans.
Small piece of burlap.
Scissors.
glue gun.

To each container from under the nursery chocolate egg you need to glue a piece of floral wire so that one end is located above central part future acorn, and the second went down to its bottom, tightly adhering to the side wall of the container.

The container should be tightly braided with twine. The edge of the rope must be secured with glue. The beginning of work should be done from the bottom of the acorn, gradually moving towards the top of the product. One of the acorns should have a twine tail. With it, it will be possible to mask the wire at the end of the work.

The upper part of the container must be pasted over with coffee beans so that they resemble an acorn hat in aggregate. As a rule, you need to glue 3-4 rows of grains. It should be borne in mind that each previous row of grains should be located under the next half. With the help of burlap, you can create oak leaves and decorate an acorn with them.

Using a glue gun, the outline of the oak leaves should also be glued with twine. So, the overall picture will look more harmonious. The vein on the sheet can also be made in the form of a rope.

The final stage of work consists in winding acorns into a beautiful branch using the ends of the wire, it should also be hidden under coils of rope or by sticking oak leaves on it.

Like this on simple example several crafts, we were convinced that the twine can become interesting material for creating decorative elements in a natural, rustic style.

Attention, only TODAY!

DIY burlap flower. Master class with step by step photos

Do-it-yourself gift for mom for the holiday "Mother's Day" with detailed description and photo. Master Class

Alena Bastrykina, 13 years old, studying at the “Needlewoman” Association of MBU DO Lesnovsky House of Children's Art.
Supervisor: teacher additional education Novichkova Tamara Alexandrovna MBU DO Lesnovsky House of children's creativity.

Description of work: master class is for children school age and all creative people who love to craft creative crafts with your own hands from burlap, twine and coffee.
Purpose: craft will become a good gift for any holiday and interior decoration.
Target: making a flower arrangement from burlap, twine and coffee.
Tasks:
- learn to create unusual, creative crafts for the holidays;
- teach correctly, cut burlap parts and make flowers;
- to consolidate the ability to work with a glue gun, twine;
- develop creative imagination, artistic taste;
- to cultivate accuracy in work, diligence, the desire to please loved ones.

Materials and tools.

Burlap, twine, coffee;
- aluminum wire thin and thick;
- rubber ball;
- scissors, pencil;
- glue gun;
- gypsum, water, dishes for diluting gypsum, a spoon, a pot.

Mother's Day is approaching. And I want to congratulate my mother with special tenderness. Please her an unusual gift. Let mommy know that I love her very much and miss her when she is not at home for a long time. For my mother, I decided to make an unusual, bright, unforgettable gift with my own hands. Maybe you will like this idea too.

Step-by-step execution of crafts with a detailed description.

We draw leaves and petals of future flowers on the sheet.

We cut them out. They will become templates for us.

We take burlap and circle the petal big flower. Learn how to use fabric sparingly.

Using hot glue on the markup, glue the petals with twine. At this stage, we recall the rules for working with a thermal gun.

Glue twine and caffeine through the middle of the petal.

Carefully, along the edge of the twine, cut out the petals.

We glue the flower petals on a small circle cut out of thick cardboard.

Let's make the middle of the flower. Take a rubber ball and paste over half of his coffee. Let's use hot glue again.

Gently, squeezing the ball, take it out. It turned out to be a coffee center.

Glue it to the flower. Here is such an unusual flower turned out.

Let's decorate the branches and stem. We twist the aluminum wire, making curls. Then we wrap them with twine.

We will make the flower stem from a thicker wire. On the tip of the wire, put on a capsule from the kinder, after making a hole. The capsule will become the sepal for our flower.

We wrap the capsule and stem with twine. During work, we will wind up twigs - curls.

It remains to glue the flower to the sepal. Which we will do.

This is what our flower looks like.

Let's move on to another type of work. Set the flower in a pot. For this we need gypsum. We breed gypsum to the state of thick sour cream. At the bottom of the pot we put small pebbles. Pour the plaster into the pot and set the flower.

While the gypsum will harden, you can safely think about how to decorate our flower arrangement, make leaves and another small flower. A change of activity helps in work, makes it possible to observe with interest how a conceived idea turns into a beautiful craft.

We continue to work. We draw four leaves and four petals according to the templates for little flower.

We glue the blanks with twine. Add veins to the leaves.

Carefully cut out the leaves and petals for a small flower that will decorate the base of the composition and add splendor.

Glue the petals together. Glue the stamens in the middle. Let's make them from strings of twine. It turned out like this flower.

Glue the leaves to the stem and branches of the flower.

It's time to decorate the base. We glue a small flower and a leaf at the bottom of the composition.

And that's what happened. I think mom will be very happy.
Beloved mother, I congratulate you,
On Mother's Day, I wish you happiness and health.
You are in my heart, even if the separation
I always remember your tender hands.
May your every day be filled with light
With the love of relatives, be warmed by the sun.

A piece of burlap can be turned into a flower, doll or bag. Ready to experiment? Then don't waste time doubting.

Do you think that creating crafts from burlap with your own hands is not fashionable and not modern? But no! From this unpretentious-looking material, you can create very pretty gizmos that fit perfectly into the decoration. Despite the rough texture, it is easy to make elegant decorations and decor for clothes and home from the fabric for the bag. Read our recommendations carefully and proceed to the master classes!

Hobby with ancient roots

The art of making handicrafts from coarse woven material is rooted in hoary antiquity. Our ancestors, the Slavs, made in this way amulets that drive away evil spirits. Needlewomen made winding dolls, in the creation of which a great spiritual and magical meaning was invested. It was believed that amulets keep from the evil eye, bring happiness and prosperity to the house, and bring harmony and mutual understanding to the family.

And at the present time, there are craftswomen who observe all the rituals and rules for creating magical amulets. But if you do not want to delve into all the intricacies of the ancient craft, you can do simple making crafts from burlap to decorate the interior, today this hobby is on the list and is very popular among women of all ages.

How to start a new needlework

Of course, you will need burlap. You can find it in craft stores. Now on sale there are bleached and natural options of this material, completely ready for use. If you got a real bag in your hands, the fabric needs to be prepared. To begin with, it is shaken out of dust, then washed and dried in a straightened form. To give the fibers a rich shade, after washing, the cut can be soaked for an hour in a decoction of onion peel or in strong tea brew.

In addition, you may find it useful:

leg-split;
threads;
acrylic paints;
glue gun, scissors, needle;
synthetic winterizer for stuffing volumetric crafts;
decorative elements - lace, beads, etc.

A very simple craft - a brownie made of burlap

You can start your passion for burlap crafts with this very simple brownie. To make it, you need to prepare a piece of burlap, a small piece of twine, thread with a needle, synthetic winterizer and acrylic paints.

How to make a brownie out of burlap:

From a piece of burlap, cut a circle with a diameter of 15-20 cm. The size of the finished craft will depend on the diameter.
Stepping back 3-5 cm from the edge, draw another circle with a small or dry remnant. Lay large stitches along the marked line with a strong thread.
Place a piece of padding polyester in the middle of the circle and pull off the thread. It should be a round bag. If necessary, add more synthetic winterizer so that the future brownie is tightly packed.
Prepare two pieces of twine. Using a thick gypsy needle, pass one segment through the center of the body of the toy, and the second at the bottom. Tie a knot at the hanging ends - these will be the arms and legs of the brownie.
Loosen the tightened edge - this is a forelock. Draw a funny face with paints. Instead of paints, you can take eyes and a nose from a broken children's toy.

That's all, the first burlap craft is ready! Agree, everything is done very simply, but in the end it turns out funny toy, which is worth taking into service if you are going.

Decorative vase made of burlap

To make a decorative vase, you will need a tall tin can, for example, from under corn, a piece of burlap with a width equal to the height of the container and a length sufficient to wrap it completely. Also prepare a glue gun, a piece of twine or lace, beads, decorative flowers.

All steps are very simple:

Wrap the jar with a piece of burlap and secure the edges with hot glue.
Weave a braid of twine and glue it along the top edge of the jar.
Tie a piece of twine around the resulting vase or wrap it with lace.
Show your imagination by decorating the craft with beads, beads, bows.

DIY burlap flowers

Despite the fact that burlap is a rather rough material, skilled needlewomen work real miracles with it. An example of this is graceful flowers. Some experience is required to make them, so it’s worth taking on them after you get your hand on simpler crafts.

To work, prepare small pieces of burlap, thin twine, soft wire and a glue gun. Follow the instructions, do not rush - then your flowers will definitely turn out.

Work technique:

From burlap, cut out five petals for one flower.
On the front side of each petal, glue a thin twine along the edge so that the material does not fray and looks neat.
From the wrong side, glue along a piece of thin soft wire. The ends of the wire should look 1-1.5 cm below the petals.
Gather a flower from five ready-made petals, fastening the leaves with a protruding wire.
Fold the snail-middle of the flower out of twine and glue it to the center of the craft. You can also make stamens from short pieces of twine.
Beautifully bend the leaves. Thanks to the wire frame, this will be easy.
At all stages of work, in no case do not rush. The glue should grab well, otherwise the flowers will begin to spread, and the work will only bring grief.

With these flowers you can decorate a box, a vase, a doll hat. And you can attach them to wire legs and collect a bouquet. To prevent the wire from being conspicuous, first wrap it with thin twine. The number and shape of the petals can also be varied to create, for example, lush roses or delicate lilies.

Ideas for creativity

By the same principle as flowers, you can make crafts in the form of butterflies, leaves, bows. Usually they are used not as independent elements, but to decorate more voluminous creations.

If you remember that burlap is an ordinary, albeit coarse, fabric, you can sew a variety of toys from it. Households, little animals, birds look especially impressive - everything related to country style. This needlework is wonderfully combined with stocking dolls.

The embroidery on burlap looks beautiful and unusual. In this case, knitting yarn and a thick gypsy needle are used. The embroidery technique can be any, for example, or You can also embroider.

Another idea for crafts is from cereals and coffee beans, where the same burlap serves as a canvas. The main secret consists in the fact that the base is glued to a sheet of cardboard and only then proceed to the picture itself. If the burlap is not reinforced with cardboard, the grits will inevitably crumble.

From burlap glued to thick cardboard, you get a funny tea house. The canvas is cut out like ordinary cardboard and the house is assembled with hot glue. The edges and joints are decorated with twine.

Burlap is also popular as decoration for the holidays. It makes delicate Christmas angels, graceful Easter baskets, creepy Halloween bats, .

Master classes for beginners

Jump into the step-by-step tutorials to practice crafting with our needlewomen.

The original picture can be made with your own hands literally from improvised materials.

We need: paper twine, corrugated cardboard(possible from the box), frame, ruler, PVA glue, spray paint in silver, gold or any other color and scissors. In the second version of the picture, you will additionally need beads.

We unwind the twine and smooth it with the edge of the ruler or just with a fingernail. This is a rather laborious task, so if you have assistants at this stage, this will greatly facilitate your work and reduce the time for making a picture. Do not unwind long pieces of twine, this will make it difficult to work.

We measure the pieces of untwisted twine according to the size of the cardboard, which, in turn, is cut to the size of the frame. To create a braided background, glue the twine in strips on the back of the cardboard. Try to glue the strips of twine tightly to each other, as shown in the photo.

After the strips of twine are dry and firmly “sit” on the base, we turn it over and begin to weave the background of the picture. We immediately glue the strips of the horizontal row with tension. We glue the vertical strips at the end of weaving after the entire background is intertwined.

We insert the wicker background-base into the frame.

Now you can start painting. In the first version, 17 flowers are used, and in the second - 21. Each flower consists of 5 stamens. 4 of them are equal in size, and the central one is longer because it goes into the stem. The length of the stamens is about 6 cm. Just tie a knot at the end of the stamens. (This is for the first option).

In the second version, after tying the knot, we also thread a bead. The size of the stamens is preserved.

We put all the stamens of one branch together and connect with PVA glue with a piece of untwisted twine.

We make petals from the same untwisted twine. Each flower has 6 petals. Petals are 6-7 cm in size.

Glue the petals to the stamens. The place of gluing must be closed with a piece of twine.

Flowers are painted completely with spray paint. You can use both colored and unpainted flowers in the composition at the same time.

We give a rounding to each flower petal. Use a pencil or pen for this.

We begin to collect the picture. In addition to the made flowers, you will also need leaves, which are also cut from untwisted twine. Flowers and leaves are fixed between strips of braided base. If desired, you can fix them with glue.

So, without much effort and expense, you got the original picture.

Get inspired and create. Good luck!!!

Burlap, coffee beans, cinnamon sticks, jute ... - I love any crafts using these components) I generally discovered burlap for myself quite recently) I bought 5 meters, it is sold in rolls in hardware stores. If it is covered with gold spray, then the effect is breathtaking! You can do anything, frames, paintings, upholstery for furniture, flowers, vintage prettiness, combine burlap with lace ... There are so many ideas that you can’t list everything. But, as for the cinnamon sticks, we have them, horror, how expensive. And you can’t buy it anywhere, only from one man in one market. Price!!! 3 things - 1 dollar! How are you doing with cinnamon?

In general, I digress from the topic))) I offer you ideas for autumn and New Year's Eve decor made of burlap, cinnamon sticks, jute and small plaster castings. With the help of cinnamon, you can create such a spectacular candlestick from a glass. Very beautiful!

New Year's wreath of burlap and cinnamon sticks