home » Needlework » Quilling snow maiden voluminous. Quilling master class of Santa Claus do-it-yourself paper

Quilling snow maiden voluminous. Quilling master class of Santa Claus do-it-yourself paper

Master class by Irina Bazarova.

For us to work need:
1. strips for quilling in various colors;
2. quilling tool, tweezers, scissors;
3. glue;
4. paper.

We will analyze the technique in detail using the example of the Snow Maiden. So…

1. Face.
1.1. In order to make a face, you need to take seven strips of "Apricot" 3 mm wide. Let's take all seven strips and put them on top of each other, shifting a little. Roll into a strong roll.

1.2. To give the roll a convex shape, I use a jar of shoe covers =) On the inside, you must fix it with glue. We fix everything and everything so that it does not inadvertently fall apart =)

2. Hairstyle.
2.1. We do the hair in the same way, only we take seven strips of "Yellow Golden" 3 mm wide. We give the shape of a beam.

2.2. You can do other hairstyles too. Take three strips of "Yellow Golden" 1.5 mm and weave a pigtail. We make a bang from the remnants of yellow, giving it a shape.

3. Hat with pompon.
To make a hat, we need: four stripes "Blue Sky" 3 mm and a little white. We twist the roll and give it a conical shape. We make a pompom from a white strip 10 cm long and 5 mm wide. We cut a small fringe. We twist the roll and straighten the fringe.

4. Collar.
We will need half a strip of Sky Blue 3 mm, one strip of Sky Blue 10 mm and one strip white color 10 mm. From 10 mm stripes we make a fringe. We glue a strip of 3 mm and two of 10 mm each so that the fringe is “mixed”. We straighten the fringe.

5. Body (Fur Coat, Dress).
5.1. To do this, we need to sequentially connect ten strips of "Blue Sky" 3 mm each. I twist them immediately in the form of a cone. Boring slowly and carefully so that everything does not fall apart =)

5.2. We decorate the hem with a fringe of three white stripes 10 mm. We cut the fringe and glue it to the bottom of our fur coat. Lubricate the strip with glue on each turn. I did not get very nice from above. To correct this mistake, I took confetti, cutting them from the remains of a white fringe. When everything is dry, bend the fringe up.

6. Sleeves (hands).
To do this, take two sequentially glued strips of "Blue Sky" 3 mm (for each of the sleeves) and twist the cone. We will make a fringe on the sleeves from 7.5 cm strips of white color, 10 mm wide. Gently, so that the strips do not pop out, we bend our arms. We give the outline of the elbow. We will make the handles from one strip of "Apricot" 3 mm. We also twist the necessary shape at once.

7. Legs, shoes.
To do this, we need blue squares 3x6 cm. We give a slightly curved shape with large scissors to make it more convenient to twist into a tube. We twist with a rod from the handle, fix it with glue. We measure the required length of the tubes, cut off the excess. Since our torso is empty, I fix our future legs with a hot gun. It is necessary that everything sticks evenly =) We make shoes from two strips of "Blue Sky" 3 mm. We twist a tight roll, give it an oval shape and glue it to the legs.

Decorating a house for the New Year is a troublesome task, but a pleasant one! We offer you to make wonderful symbolic crafts using the quilling technique with your own hands.

You will need materials:

double-sided paper (white, beige, red, pink);
scissors;
ruler;
ruler template with holes;
stationery knife;
pencil;
tool for wrapping paper strips;
liquid glue.

Step by step master class:

Cut segments of 0.5 cm, for this, draw a sheet. Attach the ruler to the line and draw with a clerical knife.
Twist one strip of red color into a tight roll, be sure to glue the tip. You will need a couple of such rolls - blanks for the hands of Santa Claus.
For the body, you need a long segment glued from four strips.
Wrap around a pencil or pen, fix the edge. Gently press the roll in such a way that you get a cone.
Lubricate the workpiece from the inside with glue, let dry.
Squeeze out the rolls prepared for hands.
For the brush, you need a 3 mm beige piece. Roll a roll out of it and insert it into a circle with a diameter of 8 mm.
Glue the brush into the figurine's hand.
The second limb is done in the same way.
For the head, cut two long strips of beige (out of 4 pieces). Twist 2 tight rolls, fix the edges with glue.
Squeeze, glue, after complete drying, connect the two halves together.
For a hat, prepare a segment of 5 strips, twist it into a tight roll. Give the desired shape, coat with glue and leave to dry.
For the pompom, prepare white paper 10 cm long and 0.5 cm wide, cut a small fringe. Twist the roll, glue the end to the base.
Attach the pom pom to the hat.
The photo shows what Santa Claus looks like in a disassembled state.
For hair, wind the segments and glue to the hat, as in the picture.
For the beard of Santa Claus, connect the strips together, then twist them with scissors.
Shape your face. The eyes and nose are tight rolls, and the mustache is two elements in the form of drops.
Assemble the structure.

Sleigh for Santa Claus

Using the quilling technique, it is easy to make transport for the main New Year's character.

Necessary materials:

landscape sheet of paper;
file;
pencil;
blue and white stripes for quilling;
glue;
scissors;
winding tool.

Step-by-step instruction:

Santa Claus quilling and transport are ready, it's time to move on to other step-by-step MK for beginner needlewomen.

Making a New Year's composition based on a video master class

Snow Maiden quilling

Do without the main assistant of Santa Claus in New Year it won't be fair. Any beginner quilling master can handle the work, so feel free to involve children. They will help to make modules for appliqué and voluminous crafts.

What you need:

cardboard;
star sequins;
rhinestones;
glue;
colored paper;
felt-tip pens, pencils or gel pens.

Operating procedure:

Ideally, use a printout of the image of the Snow Maiden with a beautiful winter background, which should simply be pasted over with modules. We will act "on the contrary".

Cover any background with star sequins.
Draw patterns and cut out from colored paper: the head, body, mittens, boots, hair and kokoshnik of the Snow Maiden.
Attach to the base in the correct order.
Draw a face.
Twist many modules. Give them an arbitrary shape.
Complete the quilling composition.

Decorate the picture of the Snow Maiden with a variety of figures: Christmas trees, snowflakes, animals. And also make a frame from paper curls.

The Snow Maiden in the style of volumetric quilling is made according to the same principle as the figure of Santa Claus. For a fluffy frill of a sheepskin coat, strips cut into small fringes are used. And the legs are paper tube glued to an oval tight roll.

Snowman in quilling technique

Volumetric snowman in a step-by-step lesson

Twist a tight roll from a long white piece, glue the edge. You will need 4 items.
The photo shows how to properly squeeze the roll. Glue and leave to dry. Do the same with the other rolls.
Connect the two halves of the body and head of the Snowman.
Prepare 4 elements in the form of a drop (for the arms - curved, for the legs - straight).
Gently push the module out and secure with PVA.
Glue the limbs to the body. Decorate the belly with half beads.
Attach to the snowman's head little quilling the orange cone is the carrot nose.
From golden colored paper, roll a roll of a larger diameter than the one used for the head. Squeeze it out (as in the photo), coat it with glue from the inside, dry it.
Glue the hat and the whole structure to the body.
Make a muzzle. Use tight black rolls for the eyes, and a red cut for the mouth.
Make a scarf out of satin ribbon.

Volumetric quilling snowman is ready.

Hello quilling lovers! The New Year is approaching every day, and more and more often you begin to think about how to decorate your house for new year holidays. I want to decorate the house brightly, elegantly, interestingly, but I don’t want to spend a lot of money on such a pleasure. There is always a way out, to save your money, you can make decorations with your own hands, and use paper as a material. So the jewelry will come out original and unique, and most importantly, made to your taste. Many options for quilling master classes Christmas decorations You can view it under the heading. Today I want to replenish my New Year's piggy bank - "Quilling master class of Santa Claus." I suggest you make a figurine of Santa Claus out of paper using the volumetric quilling technique and put it near the Christmas tree. It is not difficult to repeat the craft, see for yourself. Use my Santa Claus quilling master class with detailed description and step-by-step photos of production.

Materials:

Paper ribbons 7 mm, length 29.5 cm, density 80g/m2: beige, white, red and green
Paper ribbons 3 mm, length 29.5 cm, density 80g/m2: white
Paper ribbons 1.5 mm, length 29.5 cm, density 80g/m2: pink, red, dark green and beige
Scissors
PVA glue
glue gun
Twisting tool
Quilling ruler
Eyes (diameter 4 mm)
White paper
Hole punch "Snowflake"
Glue sequins

Making a roll of red paper tapes 7 mm wide, 65 mm in diameter.

We form a cone 58 mm high from the roll. We glue the cone from the inside with PVA glue.

We cut a small fringe with scissors on white paper tapes 7 mm wide. We glue the bottom of the cone with fringed white ribbons.

We cut a small fringe on green paper ribbons 7 mm wide. We glue the cone with green fringed ribbons just above the white fringe.

We straighten the fringe.

From green fringed ribbons with a width of 7 mm we glue a ribbon with a length of 52 mm and a width of 4 mm.

Glue the fringed tape to the cone glue gun. The fur coat is ready - a master class of Santa Claus!

We make 2 curved cones from red paper ribbons 7 mm wide, 19 mm in diameter and 30 mm high. We glue the cones from the inside with PVA glue.

We glue the cones with white fringed paper tapes 7 mm wide.

We also glue the cones with green fringed paper tapes 7 mm wide just above the white fringe.

We straighten the fringe. Sleeves are ready - a master class of Santa Claus!

Glue the sleeves to the fur coat with a glue gun.

We smoke 2 rolls of beige paper tapes 7 mm wide with a diameter of 34 and 35 mm.

We form the rolls with a semi-ball and glue the inside with PVA glue.

Glue the half balls together with a glue gun.

We twist a roll of beige paper tapes 1.5 mm wide with a diameter of 13 mm. We form a semi-ball from the roll and glue it from the inside with PVA glue.

Glue the ball to the floor with a glue gun.

We twist 2 rolls of pink paper ribbons 1.5 mm wide with a diameter of 7 mm.

We glue the rolls with a glue gun.

We glue purchased eyes with a diameter of 4 mm.

We twist a roll of red paper ribbons 7 mm wide with a diameter of 36 mm.

We form a curved cone from the roll and glue it from the inside with PVA glue.

We glue the bottom of the cone with white fringed ribbons 7 mm wide.

We twist a roll of white fringed paper ribbons 7 mm wide with a diameter of 10.

Glue the pom pom to the hat with a glue gun.

Glue the hat to the head with a glue gun.

Glue the head to the fur coat with a glue gun.

We twist a roll of white paper ribbons 3 mm wide with a diameter of 63 mm. We glue the roll on one side with PVA glue. With the glued side, glue the roll into the middle of the red cone (fur coat) with a glue gun.

We make a beard for Santa Claus from loops made from white paper tapes 7 mm wide.

We make 2 drops from white paper ribbons 3 mm wide (the diameter of the loose roll is 18 mm).

We glue the droplets (mustache) with a glue gun.

We make 3 drops from dark green paper ribbons 1.5 mm wide (diameter of the unraveled roll is 7 mm).

Glue the droplets (leaves) to the hat with a glue gun.

We twist 3 rolls of red paper ribbons 1.5 mm wide with a diameter of 5 mm.

We glue the rolls (berries) with a glue gun.

In a loop way, as we did the beard, we glue the hair to Santa Claus.

We make 2 drops from red paper ribbons 7 mm wide (the diameter of the unraveled roll is 20 mm).

We make 2 more drops from red paper ribbons 7 mm wide (the diameter of the unraveled roll is 13 mm).

We glue the large and small droplets together with a glue gun. Mittens are ready - a master class of Santa Claus!

Glue the mittens to the sleeve with a glue gun.

We twist 2 rolls of red paper ribbons 7 mm wide with a diameter of 26 mm.

We bend half of the roll up and glue it from the inside with PVA glue.

We twist 2 rings of red paper ribbons 7 mm wide with a diameter of 13 mm.

We glue the ring on a flat surface of the roll with a glue gun.

We twist 2 fringed rings of white paper ribbons 7 mm wide with a diameter of 15 mm.

Glue the fringed ring on top of the red ring with a glue gun. Boots are ready - a master class of Santa Claus!

Glue the boots to the white roll with a glue gun.

We glue on a fur coat and mittens with snowflakes made with a hole punch on white paper.

We decorate the leaves and berries with glue sparkles.

Master class of Santa Claus is over. Santa Claus in the technique of volumetric quilling - ready!

Thank you for your attention!

Based on a paper cone, they are probably familiar to everyone. We will tell you how you can make such a craft more interesting using the simplest elements of the "" technique. Since the New Year is approaching, we will make a Snow Maiden.

First, a cone is made. We've done enough big size so that there is enough space for decorative elements. The base of the cone is about a third of a circle with a radius of 14 cm (just fits on an A4 sheet). Hands are cut out of the same paper.

White paper is needed for the face, so we make the head separately. The shape of a cylinder is more suitable for her than a cone, and then we will close the top with a hat. The height of this cylinder turned out to be about 3 cm. We drew the face with felt-tip pens, because the pencil drawing next to the saturated color of the paper looks too pale. To make the face ruddy, we used red watercolor.

The first decorative element is fur, which will decorate the hem, sleeves and hat. To make it, you need to cut a strip of white paper about 29.5 by 3.5 cm, fold it in half along the long side and make cuts at 0.5 cm intervals from the side of the fold, leaving the edge 1 cm wide intact. Next, the strip is straightened, the uncut edges are glued together overlap, it turns out a tube.

The hem is decorated with snowflakes made using the simplest elements of the quilling technique. First, a tight spiral is made from a narrow strip of paper (you can buy it or cut it yourself). Paper can be wound, for example, on a knitting needle, and then carefully removed from it. Then you need to ease the pressure on the edges, the spiral will unwind a little, turning into a free spiral. The edge is fixed with glue. When the glue dries, you will need to give the figure a diamond shape with your fingers. Finally, the rhombuses stick together to form a snowflake. All described elements are shown in the figure in order from left to right.

The edge of the sleeve is decorated with fur on both sides to make the sleeve look more voluminous. And one more decoration is based on the quilling technique. A strip of paper on both sides is twisted into identical free spirals, which are fixed with glue, and the remaining unused paper is bent across at an equal distance from them. At the point of contact, the spirals are also fixed with glue. Finished construction pasted on the sleeve.

The basis for the hat is a tight spiral. To save time and paper, we wound it on a felt-tip pen, and then decorated the remaining hole with a pom-pom made just like fur. To give the spiral the shape of a cap, you need to shift the layers with light pressure. Having achieved the desired result, we fixed the position of the turns by gluing a strip of paper from the inside. The bottom of the hat is trimmed with fur.

Now that almost everything is ready, you can glue the head, arms and decorations for the hem. The very bottom of the hem is decorated with fur, a collar and a vertical edge are also made of fur. With the help of the latter, you can hide the place of gluing the cone. Snowflakes are located symmetrically at the bottom of the hem. The last detail is the hair. The strands are spirals of 1-2 turns with long ends. These loose ends are glued to the top of the head. To make the Snow Maiden's hairstyle look beautiful, it is better if the length of the strands gradually increases from the temples to the back of the head. It remains to glue the hat, and the Snow Maiden is ready.

The quilling technique has become known for a long time. Those who want to learn something new in the new year or get carried away with a new hobby - quilling will come in handy. The first master class can be completed in any winter month, because a gift is never out of time. New Year's quilling is a whole art. This is the creation of happiness, joy, the creation of a fabulous mood. Festive quilling involves the execution and embodiment of the most extraordinary and daring fantasies. Using this technique, you can create large panels, paintings and small postcards.

Quilling allows you to create beautiful things without spending huge amounts of money on materials and tools. New Year's masterpieces can be created using ordinary strips made from sheets of colored paper, glue and cardboard. Theme for New Year's crafts may be very different. It can be a Christmas tree, toys, a symbol of the new year.

A very important feature of quilling is that the products look chic, and you can do them yourself.

Now the New Year and Christmas can be marked by the acquisition of a new hobby, which will bring a lot of benefits and joy. Quilling can be done even by beginners. But they should choose simpler plots. In 2018, it is unthinkable to be left without the image of a cockerel.

Master Class:

Prepare multi-colored stripes from colored paper or buy a ready-made quilling kit.
Using a special tool or stick, wind the spirals.
Form from spirals by pressing the elements "eyes", "drops" and "arrows". You can look up techniques for correct pressing on the Internet.
Prepare a blank with the image of a cockerel. You can draw by hand or find the finished image on the Internet and print.
Drops should be pasted over the comb of the rooster.
The eye can be made from a twisted roll.
It is fashionable to paste over the head with yellow and white oval elements.
For the image of the beak, use the element of "arrows".
The neck should be glued with yellow and orange oval elements.
To fill the body and tail, you can use elements of a wide variety of colors.

After the craft dries overnight, the cockerel easily peels off the stencil. This craft can be used to create a postcard or decorate a Christmas tree. The cockerel will surely bring joy, happiness and prosperity to the house.

Making "Snegurochka": quilling for the New Year 2018

The New Year cannot do without the image of the Snow Maiden. This fabulous "fairy" brings joy and tenderness to the house. The quilling technique allows you to make a beautiful Snow Maiden from simple strips of colored paper. For beginners, you can find many master classes on the Internet, where the New Year and Christmas theme is fully disclosed.

To make a Snow Maiden figure, you need to prepare paper, ready-made quilling strips, scissors, a lumograph and PVA glue.

As a twisting tool, you can use a stick, a toothpick, or you can buy a special quilling machine. Before starting work, it is important to look at the pictures of the Snow Maiden and choose the one that you like the most. The finished product can decorate a New Year's wreath, Christmas tree or postcard.

Step by step:

Roll paper roll. Its diameter should be from 1.5 to 2 cm.
It is important to ensure that the finished roll does not bloom. To do this, its end should be glued with PVA glue. This role will become the head of the "girl".
Roll 6 rolls. Their diameter should be 7 mm. 5 rolls will form a crown (they need to be glued together), and 1 will become the Snow Maiden's neck.
Glue the crown to the head. Glue the neck to the bottom of the head.
Twist the rolls with a diameter of 6 mm. They should be shaped like drops. How to form drops can be viewed on the Internet. This is done by pressing the element with your fingers.
Make a cone out of plain sheet paper.
Paste the cone with drops, starting to glue from above.
When the body is ready, the head is attached from above.

The Snow Maiden can be decorated with additional decorative elements: wings, beads, sparkles, tinsel. Such a composition will be a real miracle and wonderful decoration on or along the tree. You can put a wreath of rain on the head of the Snow Maiden.

Figurine "Angel": quilling for the New Year

On the theme of the New Year and Christmas on the Internet, you can find many schemes for creating works from strips of colored paper. Thanks to the quilling technique, Christmas will not only come to every home, but will also bring beauty, joy and happiness with it. The angel will become a real guardian of Christmas and peace in the house.

For making crafts, postcards or a picture, it is best to use ready-made quilling kits, as they save time for preparing stripes.

Finished strips are of better quality due to machine production. For the Angel, you will need mostly white stripes. But you can show imagination and make it colorful.

Building a composition:

Winding the white roll.
Roll is allowed to bloom. Then, by clamping with two fingers, they give it the shape of a “drop”. To make an angel, you need 39 pieces.
Make a sharp cone from a single sheet of paper.
The cone is pasted over with “drops” in a circle.
The next circle is glued with drops with the tip down.
After pasting is completed, the top of the cone is cut off.
An angel's head is glued on top, made of two rolls glued together.
Of the elements in the form of "eyes" make up the wings.
Strip yellow paper can be made in the form of a halo.

Such an angel is suitable for decorating a Christmas tree, windows or chandeliers. An angel can be made hands that will hold christmas ball. Children's master class will allow the smallest to make crafts with their own hands.

Festive candlestick for the New Year: quilling

Winter is a wonderful time to decorate the hearth. On the Internet you can find a master class on making Christmas decorations. Candlestick can be made very beautiful and festive.

New Year's quilling will help to complete schemes with images of Christmas trees, New Year's lights, the Snow Maiden and Santa Claus. Where the sleigh (Santa Claus's transport) and deer (his faithful helpers), the Christmas star and many other attributes of the New Year and Christmas will be depicted.

Master classes for children will help to make simple crafts that will bring happiness to kids and their families. New Year's application can be done on your own. To do this, you need to show imagination and make your dreams come true with the help of paper. Ready-made quilling templates can be downloaded from specialized sites.

Master class on making a Poinsetia candlestick:

Make a star out of strips of paper, having previously drawn up a diagram.
Wind the rolls of small size and glue them inside the star.

Due to the fact that the roll can be given a variety of shapes, candlesticks can be made in a very original and unique style. Making a candlestick will take some time and will require great care and attention. You can choose from a variety of colors for paper strips. A candle in such a candlestick will look great.

Fairy-tale mood in quilling technique: Snowman

The Snowman is Santa Claus' constant helper. He is loved by children and adults. The Snowman figurine will be a wonderful decoration for the Christmas tree, walls or windows. Children's drawings can act as a template for the Snowman - this will give the craft a special charm.

To make a Snowman, you will need a standard quilling kit: a set of quilling strips, scissors, glue, cardboard and a toothpick.

To create the base for the body and head of the snowman, you will need to twist several large rolls. Two twisted rolls are glued to each other. This will become the basis for creating crafts.

Making a snowman step by step:

You need to twist another roll, which will become a hat for the snowman. It may be colored. The roll should be shaped like a cap, while the top is made flat. And inside the cap is lubricated with PVA so that it is strong and does not fall apart.
The hat can be decorated with a bubo. It is easy to make by cutting a fringe on a separate strip and making a roll out of it.
From a small red strip, you can twist a miniature nose and glue it in the middle of the snowman's face.

You can decorate a snowman with a striped scarf. The edges of the strip can be decorated with a fringe. Two black beads can become the eyes of a snowman.

Children's master class: quilling Santa Claus

What is the New Year without a figurine of Santa Claus decorating a Christmas tree, a poster, a clock or new year card. A pendant in the form of Santa Claus is an interesting and pleasant gift from children to parents. Making a pendant is easy and simple.

In order not to waste time cutting stripes, parents can purchase a quilling kit for their children.

After that, you need to give the children the opportunity to show imagination and creativity. It is worth explaining to them safety precautions, showing them how to wind the paper correctly, how to press it and create various elements to create a figure. After that, the children can begin to work independently.

Hint for creating a figure of Santa Claus:

Prepare a stencil with the image of a hero.
wind rolls different color to give them the desired shape.
Paste the figure of Santa Claus with multi-colored elements.

An attribute of Santa Claus can be a bell, which he will hold in his hands. For the entertainment of children, you can arrange a contest of Santa Claus crafts. Or you can make a portrait of Santa Claus with the whole family and stick it on the window, and glue patterns and snowflakes around it, created using the same technology.

Quilling for the New Year (video)

New Year's quilling crafts are a great way to create beautiful jewelry self made. Such crafts will be an excellent decoration for the New Year's room, for the Christmas tree, windows and walls. Both adults and children can make them. New Year's time is an excellent period for acquiring new habits and discovering talents. Quilling technology does not provide for special costs and complexity of execution. It is important to be careful, attentive and do the work with love.