Knitted winter hat with crochet brim. Master class on knitting winter hats

Only in very ancient times were headdresses a necessity, not an ornament and fashion accessory. Since the Middle Ages, there has been a boom for ladies' hats. Styles change one after another, sometimes more than 30 models per season, the length of the fields, the height of the crown, the density of the veil vary. Hats were decorated with plumes of feathers, precious stones, fur, flowers, ribbons and gold embroidery. They were made from straw, various fabrics, felt, animal fur and much more.

In the modern world, a women's hat combines several functions. Summer openwork and light options protect beautiful ladies from the hot sun, and warm winter hats stored on a frosty winter day. Another important function of a hat, like any accessory, is to decorate and create an accent in the integrity of the image.

Every fashionista wants to have original and exclusive things in the wardrobe and, of course, with such hats that no one else has. All these requirements are met by hats made by hand, crocheted.

Even though hat knitting patterns are freely available, handmade products remain unique. Each craftswoman individually chooses the color and composition of yarn, jewelry and various accessories for hats, so even things knitted according to the same pattern will be different.

For summer, openwork and light models, natural cotton or silk yarn is chosen. Warm, autumn-winter versions of the craftswomen are knitted from yarn containing wool, and dense patterns are chosen. It is these models that will be discussed in this article.

A sophisticated hat with a brim for a cool autumn day.

Required:

• Blended yarn (50% acrylic, 50% wool) 150 g;
• Hook number 5.

The embossed single crochet purl used in this pattern is knitted similarly to the embossed single crochet.

Knit the bottom and crown according to scheme 1.

Connect a chain of 4 air into a ring. loops.

1. First row. Link 3 air. lifting loops, knit 8 tbsp. with a crochet, finish the row with 1 connecting column.
2. Second row. In each loop of the first row, knit 2 tbsp. with a crochet. In the first case, replace 1 tbsp. with a crochet for 3 air. lifting loops. Finish the row with a connecting post.
3. Third row. Knit 2 tbsp. with a crochet in every second loop of the row below. Start and end in the same way as the previous row.
4. Fourth row. Start and end in the same way as the rows below. Knit 2 tbsp. nakida in every third loop.
5. Fifth row. Knit 2 tbsp. with a crochet in every fourth loop
6. Sixth row. Knit 2 tbsp. with a crochet in every fifth loop.
7. Seventh row. Knit without increments embossed purl st. single crochet in all loops of the row.
8. 8th, 9th, 11th, 13th, 15th and 16th rows knit st. with a crochet without increments.
9. Knit the 10th, 14th and 17th rows without increments with embossed purl sts. without a crochet.
10. Twelfth row. 1 air. lifting loop, 2 tbsp. single crochet, in the next loop of the row, knit * 3 tbsp. with a crochet with one base and one top, then 5 tbsp. single crochet *, knit from * to *, finish row 2 tbsp. without a crochet and a connecting column in the lifting loop.

Knit with double crochets between the loops of the last row, 5 rows, in the 2nd and 4th rows add 3 times 14 loops. Knit the last row with embossed purl sts. without a crochet.

Finishing with chains of air. loops according to scheme 2.

When knitting the next caps facial embossed art is used. with a crochet. In order for the relief of the cap to be clearly visible, it is better to use thick yarn and hook No. 5 - 5.5.

Connect a chain of 5 air into a ring. loops. You can use an amigurumi ring.

1. First row. Knit 3 air in the ring. lifting loops and 17 tbsp. with a crochet. Finish row 1 with a connecting column.
2. Second row. In each loop of the row, knit (1 double crochet + 1 embossed double crochet). In the first case of this row and all subsequent rows, replace the first loop with the appropriate number of lifting loops. Finish the row with a connecting post.
3. Third row. In every second loop, knit (1 stitch with a crochet + 1 embossed stitch with a crochet). In the remaining loops, knit 1 tbsp. with a crochet.
4. Fourth row. In every third loop, knit (1 stitch with a crochet + 1 embossed stitch with a crochet).
5. Knit according to the pattern for 2 more rows. Measure the bottom diameter. If you need to knit a few more rows according to the traceable pattern of adding loops.

Knit according to the scheme from the 7th row. For the convenience of knitting, it is better to start each row with st. with a crochet going to the relief st. double crochet, this can be achieved by knitting an additional connecting column. In this case, the relief columns go diagonally. Knit according to the pattern. In the last two rows there is a decrease in loops.

Knit according to the scheme of Art. without a crochet. In the last row every 4 tbsp. without a crochet, knit 2 tbsp. single crochet with one vertex.

Tie with a "crustacean step".

Next beanie bright color not only warm on a cold autumn morning, but also cheer up with a bright color.

The knitting pattern of this product is extremely simple. The hat is knitted. without a crochet, and to give relief to the crown, it is necessary to knit st. without a crochet behind the back wall of the previous row.

Start the bottom, as in any other crocheted hat, from the center and knit in a circle, making increments of 1 loop, first in each loop of the row, then, in every second, in every third, etc. until the bottom diameter reaches the desired size. Connect the visor according to the scheme. Decorate the hat with a buckle or any other accessory you like.

Next hat completed in vintage style.

Required:

• Hook No. 3.5;
• 100 g of beige threads;
• 50 g of brown thread;

A hat is knitted in two parts, the bottom is separate, the squares are separate, then the parts are connected and the hat fields are knitted.

The beginning of the bottom knit, as usual, in a circle st. without a crochet, adding 6 loops in each circle. when the bottom reaches the required diameter (17 cm), knit 3 cm in rows without increments.

Make squares according to the scheme.

Connect a chain of 6 air into a ring. loops.

1. First row. 3 air. lifting loops, 3 air. loops, * 3 tbsp. with a crochet, 3 air. loops *, repeat from * to * 2 more times, 2 tbsp. with a crochet, 1 connecting column in the third lifting loop, 2 more connecting sts.
2. Second row. 3 air. lifting loops, 3 air. loops, 3 tbsp. with a crochet in the same arch of the previous row, * 1 air. loop, into the next arch of 3 air. knit loops (3 stitches with a crochet + 3 air loops + 3 stitches with a crochet) *, knit from * to * 2 more times, 1 air. loop, 2 tbsp. with a crochet in the first arch of the row below, finish with 3 connecting posts.
3. Third row. 3 air. lifting loops, 3 air. loops, 3 tbsp. with a crochet in the same arch, * 1 air. loop, 3 tbsp. with a crochet in 1 air. loop of the row below, 1 air. loop, into the next arch of 3 air. knit loops (3 stitches with a crochet + 3 air loops + 3 stitches with a crochet) *, knit from * to * 2 more times, 1 air. loop, 3 tbsp. with a crochet in 1 air. loop of the row below, 2 tbsp. with a crochet in the first arch of the previous row, a connecting column in the third lifting loop.

Tie together using connecting posts. Tie them to the bottom. On the bottom of the squares, perform 1 row of art. without nakida without increments. In the next row, knit 2 tbsp. single crochet with one base in every third loop of the row. Tie with a "crustacean step".

The hat is one of the universal accessories. This headdress can be sewn from fabric or knitted from yarn. The latter option is especially suitable for hot summer days or vacation time. Crochet summer hats can be mastered by any needlewoman, they are so easy to make.

How to crochet a hat?

All crochet hats are knitted according to the same principle. First you need to take your measurements and think over the future model. Fasten the measuring tape around your head. It should pass through the back of the head and the middle of the forehead. The resulting number should be remembered. This will be the size of the finished headgear.

Knitted hats can be completely different - with large, small fields, openwork or a solid pattern. It is also worth paying attention to the type of yarn. Often, crocheted summer hats are knitted from cotton and linen threads. They keep their shape very well. In addition, they are easy to starch. This processing allows you to make the edges more rigid. It is best to use threads of medium thickness.

The technique of knitting hats comes down to the fact that they are first knitted with a crown. To do this, they close the air loops into a ring, and then they begin to make increases. After even knitting, a bottom is obtained, which has wrapping edges. After that, they move on to the fields. Increase and knit the same number of loops to the desired width.

Crochet hat: knitting pattern

You will need:

• measuring tape
• Threads of medium thickness
• Hook 3 (or any other that fits the yarn)

Manufacturing instruction:

1. Tie 3 air loops and close around with a half-column. Knit 2 single crochets in each.
2. 2nd row, start with an air lifting loop. Then, in each column of the previous row, knit 2 loops according to the pattern. Finish knitting by connecting the beginning and end with a half-column. This action should be repeated at the end of each row.
3. On the 3rd row, start reps: 1 single crochet in the 1st loop, 2 in the 2nd. We start the row with an air loop, and end with a connecting column.
4. 4th row: 1st 2 loops - 1st column each, and in the 3rd we knit 2 single crochet.
5. While doing additions in this way, tie another 10 rows. We got the bottom of the future hat. At its base lies about 68-70 loops.
6. Next, we knit a tulle. To do this, we perform 1 column in each loop. Thus, you need to knit the fabric to a height of 12 cm. We knit 2 columns in the last loop of the row.
7. Start making additions. In the 1st loop, knit 2 columns, skip the next. Knit the fabric in this way to 18 cm (total height from the beginning).
8. Next row: 1 loop in the 1st column, 2 - in the next. Repeat alternating to the end of the row.
9. Continue knitting the hat by knitting 1 single crochet. Knit in this way until the brim of the hat reaches the desired width. Cut the thread and pull the tail through the loop. Then carefully hide it.

Crochet hat for a girl: job description

You will need:

• Thin yarn like "Iris" - 100 gr.
• Hook 2

Manufacturing instruction:

1. Link 12 air loops and close them in a ring.
2. 1 row: 1 double crochet, chain 1, double crochet 2 in 1 stitch, chain 1. Repeat in this way until the end of the row.
3. 2nd row: 1 double crochet, chain 1, double crochet 1, chain 1, double crochet 2 in 1 stitch, chain 1.
4. 3rd row: 1 double crochet, chain 1, double crochet 1, chain 1, double crochet 1 in 1 stitch, chain 1. Knit in this way for the next 3 rows.
5. 7 row: knit 1 double crochet in each loop, and 1 air loop between them.
6. Let's move on to the fields. And we knit 2 double crochets in each loop of the previous row. Between them - 1 air loop.
7. The next rows are double crochets in each loop. We knit in this way until the fields reach the desired width. We cut the thread and stretch it with a hook into the last loop. We carefully hide the tail on the wrong side.
8. You can decorate the finished hat with a ribbon or crocheted flowers.

Crochet summer hats: how to knit?

This hat model is quite simple in its implementation. At the same time, she looks quite stylish. It can be worn with summer sundress, denim shorts or linen trousers. The headpiece is universal and suitable for any style of clothing.

You will need:

• Cotton or linen yarn, 320 m in 100 gr. - 1 skein.
• Hook 2
• Line for fixing margins

Manufacturing instruction:

1. First, we calculate the diameter of the bottom of the future hat. To do this, we take a measurement of the girth of the head. Divide the resulting number by 3. Then subtract 2 cm from it. This is due to the fact that after washing the product will sit down a little, but then it will stretch during wear.
2. We begin to knit the bottom. To do this, we close 3 air loops into a ring. Then we knit 6 loops into it.
3. From the 2nd row we start adding. To do this, we knit 2 single crochets in each loop.
4. 3 row: 2 single crochet in 1 loop, 1 - in the 2nd. We alternate knitting in this way to the end of the row.
5. We knit according to the scheme until the diameter of the bottom of the hat with a hook becomes equal to the number that we received thanks to the calculation at the very beginning.
6. We turn to the implementation of the crown of our headdress. To do this, we knit 1 single crochet in each loop. The 1st row is quite tight. Thus, we continue knitting periodically trying on the workpiece. You need to finish the crown when it reaches the height to the ear. At this point, you need to create holes for threading decorative tape. To do this, we knit the last row of the crown with 1 crochet.
7. Next, we move on to the fields.
8. 1 row: in every 10 loop of the previous row we knit 2 single crochets. The next 3 rows are performed without additions, according to the figure.
9. 5 row: we make an addition in the form of 2 columns without a crochet in each 12 loop. We knit the next 3 rows without increments.
10. 9 row: adding 2 columns in each 14 loop. The next 3 rows are unchanged.
11. 13 row: adding 2 columns in each 16 loop to the end of the row. Next, we knit 3 columns without increments. We have formed a slightly flared hat brim. We turn to their strengthening.
12. Cut off a long piece of string. We press it to the last row and carefully tie it with a single crochet. When we come to the end of the row, the fishing line should be cut and its edges connected. To do this, they are melted with a lighter. We cut the thread and carefully hide it inside the headdress. Summer hat crochet ready!
13. Almost all finished hats do not keep their shape. They can be made tougher in a variety of ways. Usually use starch, sugar syrup. No less effective is the gelatin solution. Take and heat 1 tbsp. water. Pour a bag of gelatin weighing 25 grams into the hot liquid. Mix everything thoroughly. Then add 0.5 tsp to the solution. salt and 4 tbsp. l. 9% vinegar. The liquid should be poured into a large bowl. Then a knitted hat is placed there and allowed to get wet. Next, the product is squeezed out, the water is allowed to drain.
14. We cover the table with a bag or polyethylene. We put a three-liter jar on it. We put a hat on her. Let's give it a shape. We pay special attention to the tulle. Let her dry a little. Then we take off the hat and leave it standing on the polyethylene. Wet the fields with a sponge and smooth them thoroughly. They should lie flat on the table. Let the product dry. After that, the headdress is ready to wear.

Crochet hat: photo

In order to crochet a hat, you need to take a measurement of the girth of the head. Knitting starts from the bottom. Usually, the air loops are closed in a ring, and then additions begin. So they knit until the workpiece reaches the desired size. Then they move on to the crown. It is knitted without additions. For fields, a certain number of double columns should be performed. They will help expand them. Then the fields are knitted without additions until they reach the desired width.

This hat was knitted in the Land of Mothers.

Description from Yesenia:

Through trial and error, I came to the conclusion that it is better to knit such a hat model with thick yarn in one thread (100-230 m in 100 gr.) Or in 2 threads (150-200 m in 50 gr.), Hook No. 4 -5! Due to this, she gets such an interesting shape, it was not in vain that the scheme was drawn (by the Japanese or Chinese) for 6 rows with increments, and then without increments! For such a model, yarn "Alize LanaGold", Pekhorka "Children's Caprice" in 2 threads (I personally tried it), Vita "Brilliant" in 2 threads (I personally tried it), acrylic (depending on the footage, look in 1 or 2 threads to knit) and any other yarn, just look at the footage and already adjust to it!

According to this pattern, the first 5 rows of the hat are knitted - the bottom. I will give a description, as given in the diagram, for 18 STCH = 18 wedges. I write, as I understood and knitted myself.

1 row. Dial 4 air. p., close them in a ring or make an amigurumi ring so that the hole on the top of the head is not visible. Next, we knit 3 air. lifting point, 17 STSN in the ring, connecting loop in the 3rd air. lifting item. At the end of the row, you get 18 sts.

2 row. 3 air. lifting and in the same column we knit a embossed front column (in this scheme only front embossed columns are used, how they fit), then we knit into the next column of the previous row - 1 STSN and 1 embossed column into it, so to the end of the row. At the end of row 36 stsn.

3 row. We start the row with a relief column (with a connecting loop we pass to a relief one). 3 air. lifting point (beginning of the first wedge), then 1 stsn (into the next loop of the previous row), and then we knit 1 embossed column into the embossed column of the previous row, where we had 3 air. lifting point, i.e. to the beginning of the first wedge (shown in purple in diagram 2). Further into the next relief column (the beginning of the second wedge) - 1 STCH, then 1 STCH (into the next loop), and then 1 relief column at the beginning of the second wedge. So we knit to the end of the row. At the end of row 54 stsn.

4 row. We start a row with a relief column (the beginning of the first wedge) - 3 air. lifting, 1 stsn (in the next loop), then we knit 1 embossed facial column in 3 air. lifting point (beginning of the first wedge), 1 stsn. Next, work 1 dc into the next crochet (beginning of the second wedge), then 1 dc, 1 crochet into the beginning of the second wedge, 1 dc. So we knit to the end of the row. At the end of row 72 stsn.

5 row. We start a row with a relief column (the beginning of the first wedge) - 3 air. lifting point, 1 STSN (into the next loop), 1 relief column in the first 3 air. lifting point, 2 stsn (in the next 2 loops, in each one stsn). Further, in the next embossed column of the previous row (the beginning of the 2nd wedge), we knit 1 stsn, 1 stsn (in the next loop), 1 embossed facial column at the beginning of the second wedge, 2 stsn. So to the end of the row. At the end of row 90 stsn.

6 row. We turn to scheme 1. In this row, in the middle of the wedge, instead of one STSN, a relief column is knitted (drawn in blue on the main diagram). I knit like this. The beginning of the row from the place where the relief column was (the beginning of the first wedge) - 3 air. lifting item, 1 STSN (in the next loop), 1 relief column in 3 air. lifting point (at the beginning of the first wedge), then 1 stsn (into the next loop), and then we knit 1 stsn and 1 relief column (blue hook in the diagram) in one loop - we knitted the first wedge. Next, we knit the second wedge (skipping one loop): 1 stsn in the next relief column of the previous row (the beginning of the second wedge), 1 stsn (in the next loop) and 1 embossed column at the beginning of the second wedge, then 1 stsn (in the next loop), then in one loop we knit 1 STSN and 1 relief column. Further, to go to the 3rd wedge, you need to skip one loop. So about knitting you need 18 wedges. At the end of row 108 stsn.

After the 6th row there are no increases!

Next, we measure the diameter of our circle, if it turned out to be the diameter we need (see in), then we continue to knit according to the scheme 1 - 7th and subsequent rows. If the diameter of the circle is too small, then you need to continue knitting rows with increments (according to scheme 2) until we get the diameter we need!

7-N rows - crowns of the hat. Crossed columns are knitted in these rows. It is better to start a row with STSN, which goes to the relief column. In each subsequent row, you need to move one loop forward with a connecting loop, due to this, the relief tracks will go diagonally, and the beginning of the row should always be obtained from the STCH, which goes to the relief! At the beginning of the row - 3 air. lifting in the sts of the previous row, then you should have a relief column, but first you need to knit 1 stsn in a double crochet, which comes after the embossed column, and then tie 1 embossed column into the embossed column of the previous row, then 1 stsn and again a crossed column: first 1 stsn in stsn, which goes behind the embossed one, and then we knit 1 embossed column into the embossed one. So until the end of the row, due to such a crossing, our relief columns will go diagonally. At the end of this and subsequent rows, there should always be 108 sts! Thus, we knit as many rows as you need in height (keep in mind that the last 2 rows are still knitted with decreases) - this will be the crown of the hat!

N + 1 - a series of crown reductions. We start from the place where you ended the previous row - 2 air. p., 1 unfinished double crochet (into the next loop), then knit together 2 air. p. and an unfinished double crochet (common top), then 1 embossed st in the same embossed st of the previous row - we knitted the first wedge. Then 2 stsn (one double crochet in each next loop), and then 1 embossed column in the same embossed column of the previous row - this is the second wedge. Then decrease again: 2 unfinished double crochets with a common top (we knit one unfinished double crochet in each loop), then 1 relief column into the relief column of the previous row. So we knit to the end of the row. At the end of row 90 stsn.

N + 2 - a series of crown reductions. 3 air. p., 1 embossed column into the embossed of the previous row, then 2 unfinished double crochets with a common top, 1 embossed column, 1 STCH, 1 embossed column, 2 unfinished double crochets with a common top, etc. until the end of the row. At the end of row 72 stsn.

You can reduce immediately in one row by tying 2 unfinished double crochets between the relief columns with a common top!

Hat brim. According to the scheme, 9 rows of STBN fields are knitted. In the 9th row, every 4 stbn 5 and 6 stbn fit together! The number of rows of fields according to your desire. Tie the fields with a crustacean step or come up with something of your own!

According to the scheme, you need to knit 18 STSN = 18 wedges in the first row, I tried 18 wedges, it turns out that it “excites” a little, so I will initially knit 14 STSN = 14 wedges in the first row! I started knitting with my own threads, only in 2 threads and I am already satisfied with the result

The beginning of my knitting. I knit in the same way as described above, only for 14 stsn = 14 wedges, so below I gave how many stsn I got at the end of each row!

1 row = 14 stsn

2 row = 28 stsn

3 row = 42 stsn

4 row = 56 stsn

5 row = 70 stsn

Having connected the first 5 rows, the diameter of the circle was obtained = 14 cm.

The diameter of the circle turned out = 17 cm, what you need

Next, I will knit 7 and subsequent rows, as I wrote in the description for the 7th row without additions with crossed columns. Tied the 7th row, the circle began to round off. As you can see, it is rounded to the front side, do not be alarmed, continue to knit further, when you have more rows of tulle connected, it will wrap on the wrong side!

From the 8th row I will change the thread to melange!

Melange thread turned out 9 rows (without the last 2 rows with decreases), and only 16 rows = 17 cm

Then I knitted 2 rows with decreases. In the first row of decreases, I knitted 2 unfinished sts between the embossed columns (I immediately reduced all the loops in one row), and knitted the second row like this: 1 embossed column, 1 stsn, 1 embossed, 1 stsn and so on. The bottom of the crown is pulled up and sits well on the head. In total, it turned out at the end of the row 57 STSN. The height is 20 cm.

Cords for decoration can be viewed.

Greetings! Today I post detailed master class By crochet warm hat with dense fields.

The first post with a description about such a hat was. Those who knitted according to that description had various questions, up to how to knit without lifting loops, how to knit fields and others. Therefore, in the end, I decided to make a new description, because I wrote the past from my memories, and forgot some moments.

True, each time you have to calculate the parameters again for the size of the crown, the number of rows, etc. Because when knitting with a thick thread of embossed columns, the crown seems to rise, and you need to calculate its diameter a little more.

Well, I was contacted according to this scheme, not only hats, but also a hat. Unexpectedly, she aroused great interest among many knitters. Therefore, as I wrote above, I prepared a detailed photo-MK. It is very large, more than 40 photos, I had to split it into two parts.

• In this post I will show you how to knit the crown and crown.
• In the next one, I will reveal the “secret” of how to tie neat margins with a beautiful, thin outer row.

By the way, please note that although the hat is knitted with dense threads and three-dimensional pattern, margins along the edges are thin, light! Everything is done with the same crochet.

Hat size: for a 1.5 year old baby.

I'll show you the crown right away. All pictures are clickable (open when clicked in a new window), can be viewed in the format of a photo album.

So, let's begin. What you need to knit a hat:

• hook No. 3.25 (I have "Addy");
• yarn "NAKO" Bambino, 25% wool, 75% acrylic, 50g/130m, two colors, I will call them "orange" and "green". Although, different names are suitable: orange, carrot, ultra-yellow, light green. The skein of orange color is a little started, from which I knitted flowers for booties-boots. It turns out that thread consumption 100 grams.

Notation used:

• air loop - VP,
• connecting loop - joint venture,
• double crochet - CCH,
• embossed front column with a crochet - RSSN.

How to crochet the top of a hat

Detailed description big flower with a Dorset button associated with this hat can be seen in post . I specially made it earlier so that I could leave a link for those who like the flower.

So, we start knitting with a green thread. Let's make an "amigurumi ring" ("magic loop").

We collect 3VP of lifting into it.

Then 11 double crochets for a total of 12.

They pulled the end of the thread, and pulled it into a ring.

Let's finish with a connecting loop at the top of the first column (that which turned out from the three lifting VPs) - 1 row is ready.

From the second row we will perform crown supplements. Let's start like this:

without lifting VP, we immediately knit RSSN into the leg of the Column CH from three lifting VPs before. row. I show you step by step. They threw a yarn over on the hook.

They captured the leg of one column before. row.

Pulled out the column.

Tied the first Embossed CCH.


We knit the second column - it will be simple, in a jumper (she showed with an arrow where exactly).

And, right there, they tied the Relief CCH nearby. The arrows show two relief columns.

Further * StSN + RSSN * - to the end of the river, only 24. But, there are 23 of them in the photo now. I'll show you how to finish the row so that the seam is invisible.. Now I remember how I know this technique: Olesya has it in the description.

See what we're doing. We knit a simple Column CH into a jumper in front of the first Embossed Column with a crochet so that the seam is not visible. They tied him up.

Then we knit the joint venture into the top of the first column of the previous one. r., i.e. pull it out of here.

I pull it out

And they closed the joint venture. The second row is ready.

Third row: * two Embossed CCHs, 1 simple Column CH * - to the end of the row, 36 in total.

That is, we knit like this: 1 embossed in the 1st RSSN before. row, the second embossed in the leg of a simple Column CH previous. row, next to a simple StolbikSN - in a jumper.

Fourth row: * three Embossed CCHs, 1 CCH * - total 48.

Thus: 1 and 2 Embossed SSN in Rel. SSN prev. p., third Rel. SSN in the leg of a regular double crochet previous. p., and, next to it, knit a simple St CH in the jumper, i.e. again add 1 St CH in each wedge.

Fifth row - 60: * 1,2,3,4 Relief. SSN - shown with red arrows, 1SSN - blue arrow * In the photo of the beginning of the row, the 1st wedge is shown.

I measured it, it's still not enough for the top of my head.

Sixth r. - 72: * 1-5 RelSSN, 1 St CH *.
Seventh r. - 84: * 1-6 RelSSN, 1St CH *.

Eighth r. - 96: * 1-7 RelSSN, 1StSN *. Measured - crown 14 cm. I am knitting a baby hat, so the size of the crown is right for me. If you knit in an adult size, keep in mind that the pattern is voluminous (which I already wrote about above), the top of the head looks larger than it will “sit” on the head.

We will knit a hat with a crown

We turn to knitting the crown, adding a thread of a different color to the main one. I make a loop of orange thread, put it on the hook, which I took out of the main knitting. Then, I pull the first green loop through the orange loop, like this.

Then we knit with green thread 2 Embossed SSN to two Embossed SSN prev. row.

Be very careful here, at the beginning of knitting with different threads. So, it turns out like this: with green we knit 1 RelSSN in the first Rel SSN before. R., 2 - in the second ReliefnSSN before. p., change the thread, knit orange NEARLY into a jumper with a simple StSN.

SKIP the next embossed double crochet (otherwise you will get additions) and again we knit two Rel-x Columns CH green, next to the Column CH orange. Further it will be easier, the main thing is not to confuse anything here.

It turns out that green all the time goes on top, and orange - on the bottom.

And further! Be sure every time, on each column, tighten the loops when changing the threads, otherwise the row will “move out” and the hat will turn out oblique. Hard? It just seems, just be careful and patient, everything will work out!

I'll show you step by step how to do it.

So, the 1st row without increments is connected, it turned out exactly 96 loops. See, my last orange STCH ended just before the previous two PCCHs. row (the small orange dot is the same loop that we made and put on the hook in front of the green one when we started knitting with two threads, remember? Showed with an arrow).

We knit the second row of the crown according to the pattern. No lifting loops! Here is a photo of the first wedge. I'll show you how to tighten the thread.

Look: I knit StSN with an orange thread, while the green one sagged slightly.

So I knitted StSN orange, green hung.

Now, picking up the green one, I immediately pull it up - like this. And, I knit the first of two PCSN green. Look - the orange thread remains at the bottom, the green thread passes from above.

We tied both RSSNs, the orange one sags, now I will pull it up and tie the usual StSN.

Of course, while knitting, both threads do not lie on my knitting, in the photo I specially put them on top so that you can see how they are arranged in my process. And so, they hang from the wrong side, and do not interfere with each other, do not get confused after a couple of such rows are connected.

We knit a tulle, alternating threads. At first, it’s a little unnerving that you have to change them all the time, and make sure that they don’t twist, and the hook doesn’t cling to another. But this is only at the beginning, then one thread will always be on top, the second on the bottom.

That's all for today!

Sincerely, Saule Vagapova

Seal

Crocheted hats often begin to knit from the top of the head and, depending on the shape of the hat, they make increases according to certain patterns. There are three main types of hats.

1.Classic round cap. At the same time, a circle with a diameter of 12 cm is knitted, making increases in each row. Then the increase is done through a row to a size equal to the girth of the head. And then they knit without increments to the required depth of the cap.

2. The cap is slightly elongated. In this case, a circle is knitted with fewer increments. If knitted with single crochets (SC), then in the first row they start with 5 sc and make five increases in each row. If knitted with a double crochet (CH), then start with 10 CH in the first row and make 10 increases in each row. So they knit to a size equal to the girth of the head. And then they knit without increments to the required depth of the cap.

3. "Kuban". Knit a flat circle to the desired girth of the head. The diameter of such a circle is equal to the girth of the head divided by three. Next, knit without increments to the desired height of the crown.

Ways of knitting a flat circle.

1. Knitting with single crochets (RLS). Knit a chain of 5 loops and close it in a circle. In the first row, 6 RLS are knitted, this circle is divided into 6 wedges and 6 columns are added in each row. The increase is always made on the last column of the wedge. In this case, the wedges are symmetrical and the lines of increments between them are noticeable.

2. Knitting with double crochets (SN). Knit a chain of 8 loops, close it in a circle. In the first row, 12 CHs are knitted, the circle is divided into 12 wedges and 12 increases are made in each row.

3. Knitting with semi-columns (PS). Knit a chain of 6 loops, close in a circle. In the first row, knit 8 PS, divide the circle into 8 wedges and make 8 increases in each row.

Ways to make additions.

1 way. The increase is performed on the last column of the wedge . The wedges are symmetrical and the increase line is noticeable.

2 way. The increase is performed on the first column of the wedge. The line of increase is noticeable.

3 way. Increases are made in each wedge so that they are not located one above the other. Then the increase line will not be noticeable.

2nd way to perform increases for RLS