From Svetlana Sorokina.

Eight kanzashi by March 8

The number 8 has long been a symbol of the onset of spring, the awakening of nature and a wonderful holiday - international women's day. And on the eve of a wonderful holiday at the beginning of spring, everyone is faced with the choice of a gift for their beloved women, mothers, grandmothers, teachers, educators, etc. allows you to realize any flower fantasy, and therefore it is logical to assume what to make a gift for in this technique March 8 is quite real. And just can be combined in one gift bright composition of ribbons and figure eight silhouette. The base itself must be dense, keep its shape and not bend, it will be necessary to wind or stick a tape on it. Cardboard is ideal. It is cheap and can be easily cut into rings.

The basis of the congratulatory panel:

• - cardboard (two circles: one - 7 cm, the second - 9 cm);
• - green satin ribbon 1 cm wide - select the length as you work, you need to wind the ribbon around the figure eight circles.

To create a bright bouquet you will need:

• - 6 squares of red and orange satin ribbon 2.5 * 2.5 cm;
• - 18 squares of yellow-gold satin ribbon 2.5 * 2.5 cm;
• - 9 squares of green satin ribbon 2.5 * 2.5 cm;
• - 5 transparent half beads;
• - 2 decorative insects.

The above arrangement of accessories will allow you to get a fairly large figure eight, which will become a souvenir by March 8 or a pendant (then you will also need to add a gold lace to the above list). If your plans include modeling a brooch or decorating a hairband, hoop, reduce the size of the rings at your discretion and use fewer flowers. Such an accessory is simply indispensable if you have to participate in a matinee or a concert dedicated to the International women's day.

Eight kanzashi step by step

1. Prepare two rings for a congratulatory panel. Cut them out of paper. The cardboard must be very dense so that it does not bend (deform) in the finished product. Wind a green satin ribbon 1 cm wide around the circles. Apply winding layers evenly, at an equal distance, leaving no gaps.

2. Glue both rings, overlapping each other in one place. Or you can take an additional green tape and wind the parts together.

3. In the proposed version, the central bouquet consists of three golden yellow, one orange and one red flowers. Prepare 18 squares of the first tape and 6 squares of the second. The side of the blanks for all shades is 2.5 cm.

4. Model drops from the prepared squares. Combine two opposite corners in a square, heating the satin with a flame and squeezing it with your fingers. Next, once again combine all the corners in the resulting triangle, re-solder with fire. Pull the corners back, highlighting the back crease in the form of the letter V, and the central strip will open, and a crease will be traced in it.

5. For each flower, you need to make 6 drops. A green ribbon was also indicated in the list of fittings. You will need it for leaves. To make them, the squares are bent in the same way, but after modeling, the drops should be squeezed from both sides so that they become narrower.

Like the product and want to order the same from the author? Write to us.

More interesting:

See also:

Plasticine panel for March 8
Another master class from our plasticine sculptor Elena Nikolaeva. Gift for March 8...

original craft"Shoe with flowers"
Original craft "Shoe with flowers" Such a decorative item will be a decoration in the interior, ...

DIY paper flowers - more than 70 options
Paper flowers Want to learn how to make paper flowers with your own hands? You've come to the right place! 🙂 Hello...

March 8 is a wonderful holiday for women. Indeed, on this day, every woman blossoms in her own way and becomes even more beautiful. Of course, this day is not complete without gifts. The fair sex is given flowers and other cute female gifts. It is worth noting that today it is very fashionable to give gifts that were made by hand. By March 8, you can make a lot of presents with your own hands. But in this publication we will tell you about what gift to make on March 8 from satin ribbons with your own hands.

How to make a beautiful gift from satin ribbons

Number 8.

All men, without exception, think about original gift for ladies on a spring holiday. But why puzzle when with the help of ingenuity and some materials you can make something beautiful. To create a gift you may need:

• Glue "crystal" and cardboard,
• Satin ribbons,
• A variety of elements for decoration: buttons, rhinestones and beads.

Progress:

1. First of all, on your computer in the WORD program, make a template for the number 8.
2. Print and transfer the drawing to cardboard.
3. It is also worth cutting out the number 8 from cardboard.
4. Then, glue the finished cardboard template with satin ribbon. You need to wrap the number as follows. The corner of the tape is smeared with glue. The tape is wound around the figure in a spiral. It can be pasted over with one or two tapes. In this case, the tapes can be different in color.
5. Ready-made eights must be decorated. And here, as a rule, a person's personal fantasy is used. For example, you can glue rhinestones to the number 8, or bows, which will also be made of satin ribbons.

Baubles from satin ribbons.

From beautiful satin ribbons you can make great amount gifts for ladies. Next beautiful gift- This is a bauble bracelet. To weave a bracelet, you will need a couple of ribbons. At the same time, taking ribbons is worth the width that is convenient for you. In the work it is recommended to use contrasting colors of ribbons. In this case, these colors should be successfully combined with each other.

On a note! The length of the ribbons should be at least a meter long.

So, in order to weave a bracelet from ribbons, you need to put two ribbons one on top of the other. Make a knot near the edge. It should end with a loop. The ribbons will be the body of the bracelet. On each ribbon, it is worth making a loop, the diameter of which will be 10 cm. One ribbon should be threaded into the loop of the other. Then the loop is tightened.

This process should be done in sequence. It is continued until the bauble reaches the length you need.

Ribbon headband.

In this article, we talk about how to make a gift from satin ribbons on March 8th. A headband for a woman is a necessary thing. And it is quite possible to make it yourself. To create it, you should prepare:

• plastic bezel,
• beautiful satin ribbons
• glue,
• needles and threads,
• scissors, lighter and cotton pad.

Progress:

1. First of all, the plastic bezel is wrapped with a satin ribbon. In work, the ends of the tapes are smeared with glue, and in the process of work, it is worth hemming the tape.
2. Then start making flower arrangement. In this case, from the tape, it is necessary to cut off a piece with a length of 20 centimeters. On one side, the tape must be bent. On the other hand, the end of the tape should drop under the first folded end of the tape.
3. After that, with an ordinary line, you need to go along all the edges of the tape. Pull the stitching and turn the product over to the other side.
4. Now you have a bud. In order to make it look complete, you need to make a small element - a stamen. It is then attached to the inside of the bud by means of a thread and a needle. The thread must be fastened.
5. For the rim, it is recommended to make several of these buds and only then sew them to the rim.

Pillow in a beautiful pillowcase.

Gifts from satin ribbons on March 8 can be not only beautiful, but also practical. For example, a beautiful pillow in the interior of the house will always look great. In order to make such a pillow, you will need the pillow itself, which you can buy in a special store. You also need ribbons of different colors and different sizes.

In work, you may need a work surface. In this case, find foam rubber. To make a pillowcase, you will need fabric, which will be the lining. This fabric should be laid out on top of the foam on which you will work.

Progress:

1. First form the vertical top. Satin ribbons are laid out vertically and a pattern is formed from them. In addition, each row must be fixed with a pin or needle.
2. Only flat tapes are used in the work. Therefore, they must be ironed in advance.
3. If you are done with the vertical ribbons, then start interlacing them with the ribbons that will be laid out horizontally. As a result, you will create a chess pattern.
4. While weaving the ribbons, shape the size of the pillowcase. All rows must be fixed. You can always cut off excess tape.
5. Now the finished ribbon pattern must be sewn to the lining fabric.
6. Sew ribbons to the back.

Useful basket.

The next basket will not be difficult to make with your own hands. Moreover, its creation will require handy materials that every housewife probably has at home.

Progress:

1. So, take a jar. The container can have absolutely any size. You will also need tape and nails.
2. Draw dashes on the jar. This will allow you to lay the satin ribbon evenly. Then it is worth heating each carnation over a gas burner. You need to heat it up just a little bit. Just a little bit should go into the jar of cloves. Stick these cloves in a jar. You can do this from below and from above.
3. Then you should put the tape on the nail and make a couple of turns around it. Then lower the tape to the upper nail, which is located opposite.
4. Wrap the next nail and unfold the ribbons. Bank should not be translucent. Thus, it is necessary to decorate the entire surface of the jar.
5. Now start creating the handle for the basket. It can be decorated in absolutely any way. For example, you can tie a handle with ribbons using a hook in your work. Use a wire rod to create a handle.
6. Cover up every detail. To do this, stick another tape horizontally.
7. On top of the basket, you can put fruits or homemade roses, which were also created from satin ribbons.

TO wonderful holiday On March 8, you need to pick up gifts of a flower theme. On this day, it is customary to congratulate women. And they, as you know, love bouquets. The figure eight of kanzashi satin ribbons is an excellent souvenir, a spring accessory that any representative of the fairer sex will appreciate.

If you are faced with the problem of a gift for a teacher or teacher, your girlfriend or girlfriend, mother or grandmother, use the recommendations below. From satin ribbons, you can make a beautiful and delicate figure eight, decorate the accessory with spring flowers, for example, snowdrops.

To repeat the spring fantasy you will need:

• thick cardboard and a red satin ribbon to ennoble it, 1 cm wide. The length of the ribbon strip is 3.5 meters;
• gold beads on a thread or tire;
• glue, compasses, scissors.

For creating tender snowdrops:

• 42 pieces of satin ribbon white color- 1.2 * 2.5 cm;
• 21 pieces of green satin ribbon - 1.2 * 2.5 cm;
• 14 bilateral stamens yellow color(2 pieces for each flower);
• 8 double-sided green stamens (for the overall composition).

For the bow:

• 2 pieces of purple ribbon - 2.5 * 5 cm;
• 5 pieces of golden brocade (2 pieces - for a bow, 1 piece - braid the middle, 2 pieces - for ponytails) - 0.5 * 5 cm;
• 2 pieces of purple ribbon (for batik tails) -0.5 * 5 cm.

Stages of making kanzashi crafts for March 8:

Using a compass, any round objects, or simply freehand draw rings on the cardboard. Cut them out. Use either very small nail scissors or a utility knife to make the center holes. It is better to make a figure eight from separate circles, so that in the future it would be convenient to cover the cardboard with a uniform satin layer.

Wrap a red ribbon in a dense layer on the prepared rings. One ring should be slightly smaller than the other or the same.

Glue the two pieces together to form an 8.

Also, in addition, the red rings of the central base can be decorated along the contour with beads on a thread or stripes of a golden tire. Glue on the border to make the figure eight shine.

Next, move on to the painstaking work of creating very delicate little snowdrop flowers. Take pieces of white ribbon for the petals, green for the sepals, and yellow-headed stamens for the middle. Round the white stripes with small scissors on one side, on the opposite side - collect the fold. Do the same with green stripes, but do not round the segments, but cut them with a corner. Collect the stamens in bunches (4 heads each). Repeat these operations with all white and green stripes, yellow stamens.

Glue 6 white petals into the snowdrop head. Connect two double-sided stamens with glue, glue 3 white petals on them, then in a checkerboard pattern - the remaining three. Stepping back a little, glue the green petals, also in a checkerboard pattern. Yellow balls should only slightly peek out from under the white petals.

Make 7 identical snowdrop flowers.

Start gluing the buds with a spikelet of eight, decorating with green stamens. Start at the top ring and work your way down to a neat curl.

Glue all 7 buds and green stamens.

When the flowering spikelet is ready, glue the bow. Prepare wide purple satin stripes and thin golden brocade stripes. Apply gold to the center of the satin.

Close the ends of the tape, leaving the wrong side inside. Burn and glue. Prepare a thin golden brocade strip to decorate the center section.

Braid the middle of the bow. Make a double ponytail with thin purple and gold pieces.

Kanzanshi figure eight pink, decorated with mother-of-pearl half-beads and a bright bouquet of flowers - this is a symbol of tenderness, spring mood and, of course, a wonderful and expected holiday - International Women's Day. In early March, kanzashi craftswomen are in search of creative ideas, because, for sure, they have customers who will ask to make wonderful gifts. Reduced figure eight kanzashi master class perfect for the theme spring holiday. No woman can resist such a wonderful handmade souvenir. And if desired, everyone who studies this can make such a wonderful souvenir. step-by-step master class with photo.

What to make the basis for the kanzashi figure eight:

from two cardboard circles different sizes 7cm and 9cm hollow inside;

from a pale pink ribbon, the width of which is 1 cm or less, but no more;

of 18 mother-of-pearl half beads with a diameter of 0.6 cm.

What to use to model the central floristic composition:

40 square fragments of a red satin ribbon with a side length of 2.5 cm;

7 rectangular fragments of a green satin ribbon with side lengths of 1.2 * 8 cm;

10 bilateral stamens of white (or pale pink) color.

How to make a kanzashi figure eight step by step:

The floristic composition consists of 6 buds and one large three-layered flower. Each bud consists of three inverted red petals, glued together, inserted into pointed cups. Stamens and spiky leaves are additional details that complete the elegant bouquet.

Cut out two rings of the indicated sizes for the figure-of-eight base and prepare a pink ribbon. Or choose a ribbon of a different color, but preferably light, for example, white or cream is also suitable.

Make the rings satiny and delicate by wrapping ribbon around them. This is a simple but painstaking way to refine cardboard. Don't just glue the satin strips on top of the rings, as the result is unlikely to be neat.

Glue two round pieces. The junction will later be hidden under the buds and the flower, so the figure eight will look like a single product.

Prepare special inverted red petals from 2.5 cm square cuts, as well as sepals. Fold the green ribbon (7 rectangular fragments with parameters 1.2 * 8 cm, which are indicated in the list) in half (necessarily with the front side inward). Cut diagonally with a soldering iron or a hot knife blade. From each strip you will get a cup, which must be used on the bud, as well as the second quadrangular part of the petal, it will be used to decorate a large flower. In the red squares, make 2 middle folds, soldering opposite sides with a lighter. Next, curl a small triangle into a sharp kanzashi petal. After soldering the ends, turn the bottom corner outward.

For a large three-tiered flower, 22 petals must be modeled, and 18 of the same parts will be used for buds.

Glue together 4, 8 and 10 petals in tiers. Curl a small amount towards the center, and turn the other two outward.

Model 6 buds with 3 petals each. Glue everything into cups with a sharp tip.

Prepare big flower and red-green buds for decorating a gift.

Start gluing the details to the figure eight from the small ring, pushing the red protrusions of the buds up. Insert stamens between the parts. Each subsequent part is slightly superimposed on the previous one, and fill all the gaps with leaves.

Fill in the middle of the figure.

Glue the green leaves left after processing the tape with a soldering iron, with stamens, to the bottom of the flower.

Collect the stamens in a bundle and bend in the center.

Glue the piece to the bottom ring to complete the bouquet.

The resulting eight kanzashi is an independent gift, you can make it in the form of a fridge magnet.

It will also look very nice accessory on a box with a gift. Such a product is always in demand and relevant, because International Women's Day is a long-awaited spring holiday.

Good luck with your creativity!

It is necessary to present a gift to a woman by March 8 beautifully, with warm words with compliments and a smile. In addition to traditional live bouquets, a beautiful and delicate panel for March 8 with kanzashi flowers will be an excellent addition to the gift. This product can be made on the basis of a regular computer CD using satin ribbons and other needlework accessories.

Elegant flowers look elegant. They will decorate gift box and become a souvenir - a symbol of spring mood. The bouquet consists of multi-colored buds, which are based on unusual kanzashi petals, which you should learn how to make, because they look really elegant.

To complete the central bouquet of the composition, we need:

• 22 pieces of cream-colored satin ribbon - squares 2.5 * 2.5 cm;
• 22 pieces of menthol-colored satin ribbon - squares 2.5 * 2.5 cm;
• 22 pieces of pink satin ribbon - squares 2.5 * 2.5 cm;
• 9 pieces of green satin ribbon - squares 2.5 * 2.5 cm;
• 12 pieces of green satin ribbon - rectangles 0.5 * 6.5 cm;
• 6 bilateral stamens;
• 2 green felt mugs with a diameter of 4 cm.

As a basis for the panel, we recommend taking an ordinary computer disk - it is round, dense, its size is optimal. A satin ribbon of white or pale blue, pale pink, menthol colors can be wound around the disk with a dense layer, and a golden or blue tire can be put on the edge. Ordinary cardboard is also suitable, but it must be very dense. Needlewomen can also come up with their own version of the execution of the basis of the panel, based on the available materials.

Stages of creating a kanzashi panel:

The composition decorating the gift consists of three flowers: cream, menthol and pink. Each flower consists of three tiers of 4, 8 and 10 petals. To make special inside-out petals, prepare squares with sides of 2.5 cm in the indicated shades.

Fold each of the small prepared squares into four-layered triangles diagonally. Next, curl the sharp corners in the resulting triangles into oval fragments. Cut off the bottom in a straight line. And turn out the resulting standard sharp kanzashi petal by pulling the inner corner up with your finger. The stages of folding the tape are clearly shown in the photo. For convenience, it is better to use tweezers.

Make three batches of petals different color, 22 pieces in each serving. As a visual aid, use the diagram shown based on the menthol part.

Glue the petals in layers: for each color you need 3 layers with a different number of petals indicated earlier. Close the inner tier, consisting of four petals, in the form of a bud, and distribute the other two evenly around the circumference.

Glue the tiers together, forming graceful flowers resembling chrysanthemums.

Rounded green droplets are also modeled according to a simple scheme illustrated in the photo. First, rhombuses are formed, which should be rounded and the central fold should be highlighted.

Make oblong leaves with a fold in the center. Combine three leaves into a trefoil, use glue at this stage.

Glue three flowers on a green felt base in a circle at a slight angle.

Insert sprigs of triple green petals between the flowers.

Glue the stamens to the bottom of the felt, also distributing them around the circumference.

Form neat droplets from thin green stripes. Glue the leaves of the second layer onto the second prepared felt base.

First, distribute 8 petals evenly in a circle.

Then the remaining 8 - glue between them.

The bouquet and the base with leaves are the two main details of the gift.

A gift for International Women's Day is ready. It looks rich and will surely please the girl who is intended. Such an ornament can also be made in the form of a hairpin of any type: a bandage, a hoop, an elastic band or a crocodile.