home » Etiquette » What to make a chicken for Easter. What crafts to do for Easter

What to make a chicken for Easter. What crafts to do for Easter

Peel the onion and cut into cubes. Add sugar, salt, vinegar and pepper to taste. Mix and pour boiling water. Let marinate for 30 minutes. Then salt the marinade.

STAGE 2

Peel the boiled potatoes and rub on a medium grater.

STAGE 3

Peel the carrots, rub on a medium grater.

STAGE 4

Separate the yolks from the whites. In separate bowls, rub the yolks on a medium grater, then the proteins.

STAGE 5

Cut the ham into cubes.

STAGE 6

Layer 1: Lay the potatoes on a dish in the form of an egg. Salt, pepper to taste, apply a grid of mayonnaise.

STAGE 7

Layer 2: Evenly lay out the pickled onions.

If desired, pickled onions can be replaced with sour apple, it will also be delicious.

STAGE 8

3 layer: Lay out a layer of chopped ham.

STAGE 9

Layer 4: In a separate bowl, mix the carrots with chopped garlic and mayonnaise.

Spread the carrots evenly over the ham.

STAGE 10

5th layer: cheese + mayonnaise net.

STAGE 11

Layer 6: on the cheese, at the bottom of the egg, spread the protein in the form of a split shell.

STAGE 12

Decorate the salad: Cut out the beak and scallop of the chicken from the red pepper. Cut out the eyelashes and eyes from the olives.

WITH THE COMING BRIGHT SUNDAY OF CHRIST!

The egg has long been a familiar Easter symbol, and chicks for easter- a natural continuation of this theme. Have you ever held in your hands this little fluffy miracle of the color of a sunbeam? It is impossible to remain indifferent, so it is not surprising that everywhere among Easter decorations we will meet chickens.

There are a lot of ways to make them, and every year something new is added. Materials can be very different - threads, fabric, paper, felt. You can choose what is closer to you, and your children will be happy to take part in such creativity.

Easiest make chicks for easter from paper. The material is simple, cheap and affordable, always available in the house, especially if there are children. It can be a figurine, a gift box, an application in the form of a panel or a postcard. Finally, for kids, you can print cute pictures on a printer - they will color them with pleasure.

The same patterns can serve as stencils for appliqué if cut into pieces. Moreover, for the application, you can use not only colored paper, it will turn out no less beautiful. For a paper stencil, you can make several printouts: cut some into templates, and stick colored paper parts on others. By the way, colored printer paper is also quite suitable for this.

Small postcards work well if you take a multi-colored block for notes. Something will serve as a background, and of those that yellow color, cut out the details of the application. Gift wrapping is made in the same way. It's just that when you print out the contour, there should be two, looking in different directions with a distance between them.

As always, skillful hands will find a use for empty tubes from toilet paper. If there are such foil tubes, then they can simply be cut with a sharp knife into pieces of the desired length. We paste over the tube yellow paper, for the wings, cut the square diagonally, make small details of red paper for the scallop and beak.

It remains to glue everything in the right order. It is best to use a glue stick for this. Even the thinnest paper will not get wet from it, and there is no danger of spilling glue if you are doing crafts with the kids. funny handmade chicks for easter are made from egg cartons.

You need to carefully cut out the cells. For each box, we will need two of them, so a company of five chicks will turn out from a standard tray. Let's paint the cells with the paint you have: acrylic, gouache or watercolor, trying to keep the cardboard from getting wet. Let the work dry.

We connect the parts of the box by gluing a strip of paper on one side. Decorate the toy with a red beak and paws. Inside you can put a painted egg, candy or a small cookie. In general, something that will allow you to put inside the size of the resulting product. We draw the eyes of our birds with a felt-tip pen or stick them made of black and white paper.

Chickens for Easter

Fairly easy to make and handmade chicken from threads for Easter. Of the materials, we need cardboard for two circles, on which we will wind the threads, the threads themselves (acrylic, wool or wool mixture of medium thickness, of course, yellow, is suitable), as well as red paper for the beak. We make circles of the size we need, differing in size.

The small pom-pom will be the head, and the larger one will be the torso. It is better not to spare the threads so that the pompoms come out not sparse, but rather dense. You will find in detail the manufacturing process of this in the corresponding master class. In principle, a cute chick is obtained from one pom-pom.

The main thing is to decorate it with imagination. Bows, hats, a box in the form of a half of a broken shell or other entourage - and your bird will acquire originality and individuality. You can hang your crafts on a chandelier or on branches and put such a bouquet on the table.

Make chickens for Easter

Always popular felt chicks for easter, and this is not surprising, because even inexperienced craftswomen can do such work, if only they could hold scissors and a needle in their hands.

There are many variations. For example, a mother chicken with a baby in a basket looks great. The pattern is provided, so you need to print and cut out the templates of the parts, or simply copy them, increasing the size to the desired size, directly from the screen using tracing paper or loose paper. Then we cut out the details from felt, sweep them along the front

side, stepping back a little from the edge. First, we will make small parts: a scallop and paws, filling them with synthetic winterizer or holofiber, and then we sew the large ones, inserting the small ones inside with an allowance when sewing. with kids can be made from fabric.

And as a replacement for felt, thin viscose napkins, which are sold in hardware stores and are quite inexpensive. Individual chicks also look good.

The shape of the body can be different: a circle, a triangle with rounded edges, an oval or an egg. Before sewing the halves of the figurine, sew all the trim to the front side: aprons, wings, bows, grass, etc. that you decide to use, and also make eyes.

You can make them yourself using beads, buttons, beads, although ready-made eyes are usually available in needlework stores. We do the same with the eyes crochet chicks for easter. After sweeping the halves, leave a small opening for stuffing. Felt or viscose napkins are not very stretchy, so don't stuff too tightly, just give a hint of volume. Such a bird will serve as a decoration of the house, it will a good gift child, can be used as a keychain on schoolbag. A pom-pom or felt chick can be placed inside a filament egg.

Crochet chickens for Easter

And finally knitted chicks for easter- This is aerobatics. They are usually knitted from fairly thin threads, so you need to take the appropriate hook or knitting needles, so a person for whom she is at least not the first, and he has some knitting skills, can take on such work.

In principle, if you had to knit a hat, then you can cope with a spherical body and head, because you can imagine how to make decreases and increases, the difficulty is only in a very small size of the product. But it is very difficult to deal with legs and other small details due to the small number of loops and the thickness of the tool and material. Exit - in mixed media.

That is, if you are not sure that you can handle the paws, knit the head and body in the form of balls with knitting needles or crochet, you can also make wings, but make the paws, for example, from chenille (fluffy) wire or ordinary wire that is wrapped with threads , corrugated paper on glue or teip tape suitable color.

Felt is suitable for the beak and scallop, however, it is not so difficult to crochet them. Believe me, if everything is done carefully, appearance toys will not be harmed in any way. Roughly knitted limbs look much worse if they lack skill.

Amigurumi chickens for Easter: scheme

Crochet chicks for Easter it's best to start with a simple enough model to get the hang of it, as they say. We will make only a hatched chick with the remains of the shell, proposed by the craftswoman Anastasia. It consists of a head and a body, connected according to the same principle, but differing in size. We will also have to knit the upper and lower shells, wings and beak.

For the manufacture we need materials:

knitting threads yellow, white and a little red, preferably of the same thickness

factory eyes or beads of a suitable size

synthetic winterizer, silicone or other filler

and tools:

a hook that matches the yarn number (it is better that it be no more than 2.5 thick)

sewing needle
glue gun or instant glue

We start knitting from the head and torso. First of all, we knit an amigurumi ring from six single crochet stitches. You can see the sequence of its implementation in the photo. This way of starting knitting allows you to tightly tighten the circle, so that there is practically no hole left. fit in chicks for easter crochet single crochet. In the second row above each st. b/n

we knit two tbsp. b/n

In the third row, we make an increase in every second st. b/n

In the fourth row, an increase in every third st. b/n

Fifth row: in every fourth st.b / n we knit two

By the sixth row, we have a knitting width of 30 columns, we do not increase for four rows (we knit a column over a column for 6-10 rows)

Eleventh row: an increase in every fifth column

Twelfth row: in each sixth column we will knit two of one. Next, from the thirteenth to the twentieth row inclusive, we knit evenly without increments of 42 columns in each row, and from the twenty-first row we make decreases, knitting through one column: in the 21st row we knit five columns, and then the seventh, leaving the sixth untied

Further in descending order: four and decrease, three and so on, until we have 18 loops in the twenty-fourth row. Through the resulting hole, we tightly fill the figure with filler, after which we continue to reduce the number of columns until there are six of them in the 26th row. Having finally pulled the hole, we fix the thread, and push its tip inside the chick.

Others knit in exactly the same way. amigurumi chickens for Easter, scheme increase will be the same. The design of the legs, details may differ, but the principle is the same. The wings are knitted in the form of an amigurumi colza circle with one increase in each column in the second row. Third and fourth rows: 12 tbsp. b / n without increments. We fold the finished circle in half and knit along the edge, connecting it into one. We do not cut the thread, but leave a sufficient tail to use it for sewing on the wing.

We knit the upper shell, making increases from the second to the sixth row, in the same way as we knitted the head. Should be 30 tbsp. b/n. We knit the seventh row, alternating groups of columns with a crochet and without a crochet. They can be three or six loops. The edge, thus, turns out to be jagged, uneven.

The lower shell is knitted in the same way, but it is larger in height than the upper one, so we make increments until 42 columns are formed in the seventh row. We knit the next four evenly, without increments, and finish with a scalloped edge. For the beak, we make a ring of six sts, in the second row we evenly add two more and then we knit eight sts again. b / n, leave the tip of the thread for sewing. The assembly remains: sew on the beak and wings, and also glue the shells to the head and body.

Can knitted chicks for easter be made on knitting needles. The difference is small. Since the fabric in this case is more elastic than crocheted, it does not require such a rigid scheme of increases and decreases.

The height of the row is smaller here, so we decrease or add loops through the row or even less often. If the threads are thin, then you can finally tighten not six loops, but from six to ten. But the beginning of knitting is also carried out from the amigurumi ring, we only collect eight loops, and then distribute them on four knitting needles.

If the thread is thick enough, you can start with six, spreading them over three knitting needles. We can get a jagged edge like this: we knit in the face, knitting two facial ones together and then a yarn over. A hole is formed under the crochet, and if the fabric is folded, the edge will be jagged. Another beautiful easter idea- do

Chick first, freshly hatched, so very surprised

yellow threads (it can be cotton, wool, acrylic, etc., that is, you can take any threads, I have half-woolen threads - I love how they fluff up after a haircut),
round eyes (you can use two large beads),
a little bit of red cardboard (well, what kind of chicken is it without a scallop!),
2 circles or pom-pom tools cut out of cardboard
a needle with a thick eye (if you have small chickens and winding threads is quite difficult),
scissors (preferably with sharp tips).

So, first of all, decide on the size of the chicken - after all, it can be very tiny, or it can be quite an impressive broiler.

My chick is almost 8 cm and is made from a single pom pom. As I said, you can make pompoms on a special device, or you can use cardboard circles. I'll show you both ways - take your pick.

At this stage, we need two cardboard circles with cut out centers. The outer diameter is the size of our chicken, and the inner diameter gives different pom-pom densities - the larger the cut out part, the tighter the pom-pom will be.

We put two circles together and wrap them with threads.

Considering that my pompom is quite large, I did not use a needle. I unwound about 10-15 meters of thread and folded it in eight. It was with it that I wrapped it - it turns out much faster.

When we fill it completely, proceed to the next step - cut. It is more convenient to use scissors with sharp tips, you can also cut with a blade or a clerical knife - as it will be more convenient for anyone.

We pass with scissors between two circles of cardboard.

When cut to the end - cut off a piece of thread (I took somewhere 20-30 cm, so it was convenient to hold and tie) and wrap this thread in the middle between two cardboard boxes and tie it tighter.

Tied up tight? Now is the time to remove the cardboard - just cut it (or tear it) and pull it out, we no longer need it.

Now is the time to take our future chick to the hair salon and make him beautiful hairstyle. Trim the resulting pompom with scissors. My advice is to pat, remember the pompom, so that all the threads that want to separate from the general mass do it and then just carefully trim all the excess.

Glue the paws first.

This is how it looks

Glue the comb.

At the very last moment I wanted to make round surprised eyes and an open beak out of cardboard. For the beak, I cut out two droplets, I used purchased eyes.

The second chick, already able to walk

For its manufacture we need the following materials:

yellow thread,
red threads (for wrapping paws),
2 black large beads (these will be eyes),
1 red cone bead (for the beak),
wire for paws (or a nest from improvised means, then you can not do paws),
glue (I have Moment Crystal),
pompom accessories or 4 cardboard circles,
scissors (better with sharp tips),
round-nose pliers (but this is only if you make paws out of wire) ..

In my case, the head of the chicken is 3.5 cm and the body is 4.5 cm. The head and body are made of two pompoms. I made this chicken on devices for pompons, but if they are not there, we cut out circles of cardboard as we did when creating the first chicken, we just make a smaller circle for the head and a larger circle for the body. Even if there is no compass at hand, you can do without it, because in our kitchen there are always glasses, glasses and other utensils that can be circled and get a circle. First of all, we make the head.

We wind on each of the halves and add them to get a kind of circle.

We cut into special grooves.

We cut the thread about 20-30 cm long and thread it along the grooves into the middle of the pompom and tie it tightly.

After you have fixed it well, you can remove the pom-pom device. We bend the halves and pull out our fresh pompom.

We cut it with scissors without touching the thread with which we tied the middle - it will still be very useful to us.

Now we will make the body in the same way. But we don’t immediately disassemble our device, and after we tied the pompom with a thread, we fill the wire in the middle (I have an ordinary floristic one).

And we fix it simply by twisting it. Now we disassemble the pom-pom device and pull it out. We level the resulting pompom with scissors, in no case cutting off the long thread with which we tied the pompom. Here's what should happen.

Now add the head and body. We take long threads and tie them together.

We no longer need the ends of the thread - we cut them off. You will get such a preparation.

It's time to make paws. To do this, we bend the wire, forming three fingers in front and one behind. My wire didn't bend very easily, so I used round nose pliers.

Now we ennoble the legs with glue and a red thread. We start wrapping from the top of the leg (at the base of the pompom) and finish there. That is, we pass by wrapping the thread along the leg down, along each finger and climb up again while continuing to wrap.

It remains only to glue the eyes and beak. For the beak, I used a red cone bead.

The eyes are two small beads.

Voila! Our chicken is ready.

Source http://www.livemaster.ru/topic/671799-master-klass-pashalnye...

A little chick will be the main decoration of the Easter table, an excellent keychain and a wonderful reminder of the pleasant moments of the holiday. And if you make a whole family of chickens, they will surely outshine at the school exhibition.

Today I will show you how to make two chickens:newborn(and therefore very surprised) and older, on short thin legs.

To make a newborn Easter chick, you will need:

yellow threads (acrylic, cotton, wool),
round artificial eyes (or two black beads),
red cardboard (for scallop, paws and beak),
two circles cut out of cardboard.

Let's start making chicken!

1. Take two circles with cut out centers. The outer diameter is the size of your future chick, and the inner diameter determines the density of the pompom. The larger the cut out part, the more threads can be wound, and therefore, the pompom will come out denser.

So it's time to decide whether you will have a tiny chicken or a rather impressive broiler =)

2. Put two circles together and wrap them with thread.

But if you have a large pompom, unwind 15 meters of thread, fold them in eight, and only then get to work. That will be much faster.

3. Cut the threads as shown in the photo. The scissors should go between two cardboard circles.

4. Having cut the threads to the end, take new thread 20 cm long, wrap it between two cardboard boxes and tie it tight so that the pompom keeps its shape well.

5. Now cut the cardboard circles out of the pompom with scissors - they are no longer needed there.

6. Done? Well done! It's time to visit the beauty salon and give your chicken a chic hairstyle.

Align the pom-pom, straighten the threads, cut in the right places, and you're good to go.

7. Cut out comb and paws from red cardboard.

Glue them to the chicken. Like this:

8. Now glue the eyes and the beak, consisting of two red droplets. Beauty!

We take on the second chicken, which can already walk.

For work, additionally prepare:

glue Moment Crystal,
wire,
red threads,
two black beads
red cone bead.

1. Make 2 pompoms (You already know how): one is small and the other is bigger. Do not cut the threads with which you will tie the pompoms - they will come in handy when tying the parts of the chicken's body.

2. Now cut the threads. From a thin wire, make legs for the chicken: three fingers will be in front and one behind.

3. Lightly smearing the paws with glue, wrap them with red thread.

4. Glue the red cone bead. This is a chicken beak. Glue two black beads in place of the eyes.

Here are our two beauties. Sit them in and soon to a friend - Happy Easter and!

According to this scheme, I wound up bullfinches and titmouse for the New Year, almost gave away all of them. Then she made sparrows, a wagtail and completely unknown birds.
By Easter, I began to check what dyes for testicles I had and found a chicken in water from the boxes. I looked at him and decided that I could do better. I tried it and this is what happened.

It is based on the manufacturing scheme of the already mentioned Proshka, but since there are differences, I made a separate master class. I hope everything will be clear.
To make chickens you will need:
Wool or other yellow yarn;
Cardboard templates (since the sizes are small, I used promotional calendars, cutting them off a bit);
A little foam rubber;
For the eyes - beads;
For spouts - apple seeds and glue;
For the paws - red threads (like Iris), a piece of plastic and glue. I use titanium type adhesives (TITAN WILD, AXTON), they dry faster, but PVA can also be used.
We wind yarn on cardboard. Templates in these sizes:
– Breast – 8 cm
– Back – 7 cm
– Wings – 6 cm

If you make chickens with children, you can take larger templates: breast 9 cm, back 8 cm, wings 7 cm.
These birds are still quite small, but they are easier to make.

We cut the winding and get three bunches of threads. To the middle of long beam(breast) we wind a little thread (otherwise the head will turn out to be too small). We leave the back as it is, and we tie the wings in the middle. I added 3-4 white threads to the wings. I don't know why, it just seemed better that way.
We wrap a piece of foam rubber with threads to make a round or slightly oval ball. This will be the belly of the chicken.

We begin the "assembly" of the chicken. We put the breast and back on top of each other so that they are “hooked” by the middle.

We tie each bundle at the point of adhesion, forming a head.

If you put the back and breast together, then it (the head) is already clearly visible. But let's not rush.

We unfold the breast and back so that the head is at the bottom and put wings across the junction, and on top - a tummy ball. Without touching the wings, wrap the bundles of the breasts and backs with a foam ball. Carefully straighten the back and breast and, connecting the ends together, tie the tail. The length should be enough, if not enough, make another "tummy", smaller.

The tail is located asymmetrically, the back is short, the breast is longer, but it should be so, because in almost any bird most of the volume falls on the breast and tummy.

We press the wings on the sides (you don’t need to pull hard) and tie them over the already existing tail.
The second winding (from the wings) is located on top of the first, and the whole "structure" of the bird will hold tight.
If some thread is lost, then with the help of a hook we thread it so that it lies in place. I don’t know how it will turn out for you, but I use the crochet quite often to lay the strings neatly.

Gently cut the tail, it becomes like a pom-pom.

To turn the resulting blank into a chick, there is not much left: glue the beak-seed and sew / glue the eyes. I prefer to sew, picking threads in color.

Now decide if your chicks need legs or not. In my opinion, chickens are good without them, they can be taken in the palm of your hand, squeezed, and nothing will interfere. From the very beginning I planned to put them in a nest, as in the photo, but in this case the legs are not particularly needed, they are not visible.
But the husband insisted that chickens with legs would be better, however, he did not say how to make them. For the sparrow Proshka, it is proposed to make legs out of wire and wrap them with thread. This idea is very interesting, but I did not want to combine soft and tender chicks with such a rigid structure. In addition, I don’t know at what age birds with hard wire legs can be given to children, I wanted to make a safe design for any age. I had to invent it myself.

So, who decided to put their chickens on their feet, let's get started. We take out the already mentioned piece of flat plastic, and we will work on it.
We take red threads like Iris and cut into pieces of 5 cm, 6 pieces for each chicken. Then we fold each thread approximately in half (approximately - since we will cut it off later, there is no need to waste time aligning). Each segment is one "finger". We collect a drop of glue on the tip of the toothpick and grease the folded thread from the fold to about the middle. I use glue like "Titan", and if there is not enough glue, then it's worth running your fingers a couple of times, squeezing the thread, and it has almost dried up. PVA will take longer to dry. When the blanks are dry, you can start assembling the legs.

We take three "fingers", put them together so that the middle one is slightly longer than the side ones. Lubricate the still unglued parts of the threads with glue, twist with a rope and bend perpendicular to the foot. Lubricate the foot itself with glue from below, a little, and glue it on the plastic, gently spreading the “fingers” so that the leg stands straight. After complete drying, we separate the legs from the substrate and cut off the excess of hardened glue. Cut off the top of the legs, leaving the desired length and glue the legs into place.

If you take a thread thicker (and more authentic), you will get larger paws (in the photo on the right).
And about how to make more "solid" paws for bigger birds, I made a separate MK:

Now, paws up! - to dry. In my opinion, the funniest photo turned out :)

While the chickens are drying their paws, let's talk about the chicken. It is made in the same way as the chickens, only the templates are longer, and the tummy (ball inside) is bigger, for solidity. What makes it truly chicken is the scallop. Here we will dwell on it in more detail. There is only one photo, but I think everything will be clear anyway.
What you need for the scallop:
Two pieces of fabric of a suitable color measuring 2 by 3 cm. This is already with a margin for trimming, the final size of the scallops I get is about 1-1.5 cm in height and 2-2.5 in length;
Glue;
Red wool thread;
A small piece of plastic - something to dry on.
Scallop making process:
1. We glue two pieces of fabric with glue and leave it on the plate until it dries completely. Glue is needed for the rigidity of the scallop.
2. We cut the workpiece: from above - in the shape of a scallop, from below with an arc in the shape of the head.
3. We paste over the top of the scallop (its visible part) with a woolen thread and again leave it to dry.
4. Glue the scallop to the head.