How to tie shoelaces on berets. Lacing berets: how to properly and beautifully tie shoelaces

Ankle boots are an exceptionally comfortable type of footwear that can be used both in autumn and in the winter season. The relatively low weight of this shoe is another advantage that is almost impossible to level with anything. Such shoes can be called both stylish and extremely practical. She will become perfect choice for those who would like to acquire the most versatile element of the wardrobe.

However, berets have one drawback. Over time, this shortcoming may not be noticed, however, for this you will have to master a relatively complex skill. We are talking about the fact that it takes a long time to lace up the berets, and most importantly, it is difficult. It will be extremely difficult for an unprepared person to cope with this task. This is the reason why it is so important to master this skill as soon as possible. In this case, such shoes will be the perfect solution for any time of the year.

There are many reasons for the correct lacing of berets.

Finding the right lace length can be overwhelming for the vast majority of first time buyers.

• It is recommended to choose laces together with those who have already done this before. Someone else's experience in this case will be most welcome. Besides, the best option there will be an attempt to study the length of the old shoelaces. If such an opportunity is completely absent, then you will have to rely on the opinion of the consultant of the store where the berets were bought. He must have this information.
• Despite the fact that there is a lot of information on the Internet about this, it is best to trust people who have already worn such shoes. They will be able to give much more valuable advice.

IMPORTANT! The total length of laces that may be required for such shoes depends on the number of holes. Most often, on the Runet, you can find information that in the case of two pairs of eyelets, you will need laces whose length reaches 45 cm. If we are talking about 3-4 pairs of holes, then they will require laces 60 cm long and so on.

Today shoelaces are made from the most different materials including leather, jute as well as cotton. When choosing laces, you need to focus on your own needs. It is possible that the buyer of such products is a purely domestic person who does not need any additional advantages of materials that can withstand extreme conditions operation. In this case, it is recommended to choose laces that are stylish and modern in appearance.

Schemes of how to lace up berets special forces

The lacing process in this case is quite simple. First you need to thread a couple of ends into the holes that are on the bottom of the shoe. After that, it remains to insert the ends of the laces into the eyelets. They are opposite. This completes the lacing process.

The most popular type of lacing is army. There are many reasons for this. In particular, in this way you can tie shoelaces as quickly as possible.

1. First you need to thread the laces through a pair of holes located below.
2. After that, you need to cross the ends, and then thread them into another row of loops. Since it is speed that is important in this case, then, obviously, at the first opportunity, you need to tie your shoelaces in any other way.

This method was developed specifically for those who need speed. This type of lacing is called "army" for a reason. With it, the soldier will be able to put on shoes in a matter of seconds, after which he will be absolutely ready for any combat mission. That is why this type of lacing is called army.

Quick lacing

This option is suitable for both emergency cases and for those people who just like to save time.

Attention! At the very last hole, it is required to insert the lace inside the grommet from the outside, and then immediately bring it back, making a loop with this method. You can thread the free end into it. Then the knot is tightened in the very middle.

Lacing ladder

Also today, lacing "ladder" is very popular. She has another name - "European". Shoes that have been laced this way look very neat. To do this, you just need to pass 1 lace through the holes that are located below. After that, it remains to bring the lace out from all ends.

Even a schoolboy can cope with this task, so the “ladder” lacing method is often practiced in camps for teenagers. There, children are taught a wide variety of skills that can only be useful to them in real life. One of these skills is the ability to tie berets. The “ladder” method can be called ingenious, because in this way you can not only save a lot of time and effort, but also effectively tie the laces on your own shoes.

If we are talking about rough terrain or some other difficult conditions, then it is best to lace up the berets differently than always. In this case, the laces will not cling to grass, snags, and branches. What needs to be done to realize all the plans? First you need to thread the ends of the laces through the lowest holes. When this is done, all that remains is to fill one of them into the next one, which is still on the same side. Then you need to change sides and continue lacing in the same way.

IN Lately berets are becoming more and more popular. They are combined with the most different things, so they can be used in almost any wardrobe.

INTERESTING FACT. Most often, berets are needed in order to emphasize the masculinity of any suit. Interestingly, girls often use this element.

They will make their owner much more attractive in the eyes of women, because such shoes fit even jeans and look very manly. Usually buyers prefer those models that have a universal color. In this case, it will be possible to wear these shoes at almost any time of the year, except for autumn.

How beautiful to tie berets

This method is extremely simple.

1. First you need to take the lace and try to stretch it literally through all the holes that are located at the bottom of the shoe.
2. After that, the ends must be crossed with each other and threaded into other holes (we are talking about the upper part of the shoe). Then you get a stylish lacing that will emphasize all the advantages of this shoe.

Where to put the rest of the laces

Many people think that the easiest way is to use the last hole in the row. Then you just need to insert the ends of the laces inward, not outward. In this case, after the laces are tied, the ends of the bow will be located so that they can be threaded through the "tongue".

Ankle boots are boots with laces, which are an element of army equipment, but in our time they are also actively used in everyday wear. They are waterproof and weigh no more than ordinary boots. The ankle when wearing such shoes is well fixed, which reduces the risk of tendon sprains and protects the leg from dislocations and bruises.

But, in addition to all these advantages, such shoes have one significant drawback. This is a long and painstaking process of lacing. However, if you learn how to do it correctly, lacing the berets will not be difficult.

How to lace up berets?

It is enough to lace up the berets correctly once, and then, when putting on shoes, slightly loosen the lacing from above. However, if the lacing is not done correctly, the shoes will not be able to protect the foot from damage. In addition, too tight lacing can severely squeeze the leg, disrupting the proper circulation of the foot.

It is best to choose berets in which the blocks are made in the form of rings, since, for example, blocks in the form of hooks can cling to clothes and other objects. In order to select the desired lacing density, remember one of essential rules: we put on boots before starting lacing.

The most popular lacing for berets remains "army lacing". Its advantage is that it runs very quickly. The lace is pulled through the 2 holes at the bottom, after which you need to lift the laces straight and pass through the 2 upper holes. Next, you need to cross the laces and thread them from the bottom up into the next row of blocks, and then again in a straight line.

A very convenient way to lace up berets is “ladder” lacing. The lace is stretched horizontally between the two lower blocks, then the edges of the laces are drawn into the holes located above from the bottom up. Then, having crossed the laces among themselves, they must be passed through the loop formed and again stretched into the upper blocks in a straight line.

Criss-cross lacing is a fairly simple type of lacing. Starting from the bottom, the lace passes horizontally into two side holes, then the ends of the lace are folded crosswise and stretched into the next blocks in the direction from the bottom up.

It is impossible to say with certainty which of the listed methods of lacing is better. Each of them can be used in one way or another. Having tried all the options, the happy owner of berets will undoubtedly choose the most convenient for himself.

To know how to lace up berets correctly, you need to understand what it is for. Reliable fixation allows the ankle to take the ideal position, avoid injuries, excessive stress. Also, the lacing should allow for quick removal of the boot or a change in tension.

Universal ways of lacing berets with eyelets

Military and special forces different countries they know how to properly tie shoelaces on their ankle boots with eyelets or blocks (holes with a metal sleeve). Therefore, their experience is successfully adopted by ordinary owners of high boots in summer and winter versions. The charter versions of the Israeli, British, American armies are not always spelled out in the instructions, which leaves freedom of choice in the service.

Army

One of the most popular methods is "army", convenient for its speed and the ability to adjust the tension:

1. Both ends of the laces are threaded into the lower holes from above.
2. Then from the inside they are inserted into the next eyelets opposite.
3. Continue to the end.

The army version has one drawback: the tongue is heavily wrinkled. Advantage: no need to completely untie each time you take off your shoes, just remove the laces from the top pair of eyelets. Also suitable for ankle boots with loops.

Ladder

Lacing with a ladder is not so common, however, it very securely fixes the berets on the leg in the correct position:

1. The first step is the same as in the army way.
2. One end is brought into the uppermost eyelet on the opposite side and left alone.
3. The other is threaded obliquely into the second hole in a row, from below it is led into the opposite one.
4. Repeat until the end.
5. When you get a ladder, as in the picture, tie both ends of the cord into a knot.

Outside, the result looks very nice and neat.

With one hand

An interesting way is lacing with one hand. The name already promises an additional benefit: it frees one hand, for example, if it is injured. You need to tie in this way according to the following scheme:

1. A knot is tied at the end of the cord.
2. The cord is threaded into the lower hole from the inside (for the left tibia in the left corner, for the right one by analogy) until it stops.
3. The knot should be hidden behind a strip of leather or waterproof eyelet fabric.
4. Then it is passed through the hole opposite.
5. From the inside, they are threaded diagonally into the eyelet.
6. Continue lacing as described above.
7. The free part of the lace is tucked under the lacing so as not to step on it.

Inside should be diagonal "lines".

hidden direct

For rough terrain, other difficult conditions, it is appropriate to lace up ankle boots with blocks in a “hidden” direct way. Advantages: the lace does not cling to branches and snags. The implementation of the method consists in the following actions:

1. The ends of the cord are threaded through the bottom holes.
2. One of them is refueled into the next one on the same side, and the second through one.
3. They change sides and continue to lace according to the same principle.

The picture below shows a diagram of how to properly tie the laces on the berets in a “hidden” direct way.

Reliable lacing of ankle boots with hooks

In this case, the traditional criss-cross method is suitable:

1. The lace is threaded from the inside through both lower hooks.
2. Each end is wound at the fasteners obliquely.

Convenient and easy option, it can save you time. At the same time, the tongue is crushed more strongly than with other methods, but the ankle is securely fixed.

The traditional scheme for berets with such a fastening is suitable for those who often have to remove them or change the tension. To do this, it is enough to remove the lace from 2-3 upper hooks, and loosen on the lower ones. In the process of wearing, they will not untie and put excessive pressure on the leg.

Lacing ankle boots with loops

There are little tricks for berets with loops, for example, for D-rings, it is important to make knots at the ends of the laces. Such boots are used in the army and just in the field due to the fact that the loops do not cling to branches, grass and clothes when squatting. They are also in demand in the Airborne Forces, as well as shoes with eyelets, and in the special forces of different countries. Hidden way not suitable due to the fact that the cord does not tuck in. Boots with loops are widely represented in the lines modern brands: in the USA it is the world-famous Timberland, Columbia. Bertsy with such fastening are laced in universal ways:

• army;
• ladder.

The loops allow you to lace up the berets super-quickly, relax or increase their tension, and adjust the tongue, which saves time. It is important to use all the fastenings provided by the manufacturer, often tactical shoes have clamps on the upper part so that they do not dangle on the foot. Landing boots with soft shock-absorbing soles are best tied and specially hidden free ends after they have finished lacing. Craftsmen advise making additional fastenings on the back of the berets in the form of a loop or ring, where the model allows it and the cord will be fixed.

The video shows how to lace up berets and other high shoes with loops and hooks. Helpful Hints for newbies.

How to choose the right laces for berets

Usually, one or more pairs of laces are attached to army berets or branded shoes, for example, Timberland or one or more pairs of laces. However, many change them to new ones, choosing the material, color or length for individual parameters. Soft leather laces are the best solution if you often have to visit the area of ​​water bodies or during rainfall in open areas. It is relevant if there is a risk of suddenly being at a depth and you need to quickly get rid of shoes so that they do not interfere with swimming. They are easy to remove in a few minutes, where needed.

Double-braided Kevlar laces are also resistant to moisture if impregnated with a special synthetic substance. Under the influence of moisture, they lose no more than 15% of their strength. And this is important for the correct fixation of the ankle during active movement and the impossibility of constantly tying the laces on the ankle boots.

Calculation of the length of the laces for any shoe

A separate issue is the choice of length for the correct lacing of boots and berets. It all depends on the height of the ankle. There is a formula for calculating the approximate length of the shoelace, as shown below:

Horizontal distance (in mm) × Number of eyelets + 500 mm

Calculation example

On a typical model boot with 50 mm wide between holes and with six pairs of eyelets (12 in total), the approximate length of the lace is as follows:

50 mm × 12 (grommets) + 500 mm = 1.100 mm (110 cm).

Loop shoes

For shoes with loops instead of eyelets, add the width of the hole to the measurement of the horizontal distance between them. For example, on a standard boot with a width between holes of 50 mm and five pairs of loops (10 in total), each about 8 mm wide, the approximate length of the lace is:

50 + 8 = 58 mm, × 10 (hinges) = 580 mm, + 500 mm = 1080 mm (108 cm).

Shoes with eyelets and loops

Finally, for shoes with eyelets and loops, add the proportion of the eyelet width to the horizontal distance measurement. For example, a boot can have 2 pairs of holes and 6 pairs of loops for a total of 8 pairs of "holes". This means 3/4 of the total stitches, so only 3/4 of the width needs to be added. With a horizontal spacing of 50mm and an eyelet width of 8mm, we would add 3/4 of the eyelet width (6mm). The approximate length of the laces will be equal to:

50 + 6 = 56 mm, × 16 (holes) = 896 mm, + 500 mm = 1.396 mm (140 cm).

Many experienced owners of high shoes note that it is more practical to use laces a few centimeters longer than standard ones. Then they can be tied in different ways, and the ends can be hidden inside the shoes or in another way. Shoelaces for military berets are different color, common: khaki, black, brown, two-tone
Lacing berets for different activities

In England and other European countries, as in the United States, military footwear patterns are similar depending on the purpose. It depends on the model how to properly lace up the berets. If they are used only in everyday life, then you can choose one of the lacing methods and tie them, following any photo with descriptions. With increased loads on the ankle, it is worth paying attention to the methods described above for several attachment options, as additional protection against injury and inconvenience.

Video instruction for lacing high boots with loops in an army way. Fixation of free ends on the shaft.

Demi-season boots with a top made of durable elastic chrome leather 1.4 mm thick and with a reliable rubber sole equipped with a large tread are the best shoes used by numerous employees of law enforcement and security agencies, tourists and ordinary people leading an active lifestyle. As a lining, a strong and, at the same time, very soft nylon mesh is used here. The toe cap and heel of the boot are reinforced with a special thermoplastic material. The boots have a high-speed lacing that allows you to quickly and securely fix the foot in the boot. The model is equipped with a deaf valve that prevents foreign objects from entering the boot. ASSAULT BOOTS OF URBAN TYPE Combined top: genuine chrome leather (1.2-1.4 mm) + elastic on soft piping and flap Genuine Leather. Lining: laminated mesh. Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 40-46. Semi-deaf valve. Soft edge. Black color. Weight: 580 gr. Specifications Storm boots. Model Mongoose 24111 Producer BUTEX Country Belarus Top material genuine chrome leather (1.2-1.4 mm) + on soft edging and valve elastic genuine leather Lining material laminated mesh Sole fastening adhesive Instep support metal Toe and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1 , (Italy) Available size range 38-46 Shoe color black Valve type semi-deaf valve Soft piping present

The upper is made of natural chrome leather, 1.4-1.6 mm thick The lining is made of textile material Cambrelle ®, "Super Royal" ® , high density, dries quickly and does not wear off Durable sole made of thermoplastic, withstands temperatures from -40 ° C to +40 °C Toe and heel counter reinforced with TECNO G thermoplastic material The model is fixed with lacing and is durable in use Produced and manufactured in Belarus General characteristics ISBN: 5-458-45233-X 978-5-458-45233-5 Publisher: ЁЁЁ Media Series: - Specifications Army type boots (Berets). Model Omon 701 Producer BUTEX Country Belarus Top material genuine chrome leather (1.4-1.6 mm) Lining material hygroscopic and wear-resistant fabric (150 g/m2) Sole fastening glue-and-piercing Metal arch support Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C) ) 2121 Available size range 36-50 Shoe color black Valve type blind valve Soft piping present Hooks present

The model of lightweight demi-season boots with a top made of high-strength hydrophobic leather and a rubber sole with a embossed tread is consistently popular among employees of various law enforcement agencies, tourists and people who prefer outdoor activities. For greater comfort, the lining in the boots is made of dense PVC mesh. The toe box and heel counter are reinforced with a special thermoplastic material that allows you to maintain the external shape of the boots. The deaf valve prevents foreign objects from entering the boot. Demi-season boots are equipped with a lacing system consisting of eight pairs of D-shaped half rings, which make it possible to significantly facilitate and speed up the process of lacing and unlacing boots without removing the laces from the loops. ASSAULT BOOTS OF URBAN TYPE Continuation of the legendary "COBRA" series. Used in all special units RF Top combined: hydrophobic leather (1.2-1.4 mm), “DRYWALKSYSTEM” (R) (CJSC “RUSSIAN KOZHA”) + elastic genuine leather on the shaft. Lining: mesh. Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 40-46. The deaf valve protects a foot from influence of environment (dust, water, dirt) High-speed lacing. Black color. Weight: 570 gr. Specifications Assault boots. Model Cobra 12011 Producer BUTEKS Country Belarus Top material hydrophobic leather (1.2-1.4 mm), "DRYWALK SYSTEM"® (CJSC "RUSSIAN KOZHA") + elastic natural leather on the tibia Lining material mesh Sole fastening glue-on Instep support metal Toe and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1, (Italy) Available size range 40-46 Shoe color black Lacing type speed lacing Valve type deaf valve

Demi-season boots, in which the berets and the upper part of the vamp are made of nylon fabric with a density of 1000 D, and the lower part of the vamp are made of genuine chrome leather 1.6 mm thick, are perfect for law enforcement and security forces, as well as tourists or people who are fond of active outdoor activities. The undoubted advantages of this model is that the front part of the boot is protected from mechanical damage and moisture by an overlay made of Matrix leather and, in addition, the toe and heel are reinforced with a special thermoplastic material to maintain their shape. The lining in this model is made of durable nylon mesh. The high lacing system securely fixes the model on the leg, in addition, the presence of three pairs of hooks in the upper part of the ankle allows you to quickly lace up the boots. The deaf valve prevents foreign objects from entering the boot. The flexible and durable rubber outsole is equipped with a coarse tread pattern that provides optimal traction on a wide variety of surfaces, be it sand, gravel, rocks or grass. ASSAULT BOOTS URBAN TYPE This model is a classic "tactical" police boot. It has been tested in many special units of Russia. Received the highest marks for such indicators as wear resistance and comfort from the employees of the SOBR "BULAT". Top combination: genuine chrome leather (1.4-1.6) + high-strength fabric made from non-textured 1680D nylon thread. Lining: laminated mesh Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 40-46. The deaf valve protects a foot from influence of environment (dust, dirt). Black color. The toe part is reinforced - leather with high-strength PU coating "Matrix" (Italy). Weight: 545 gr. Specifications Assault boots. Model Viper 2331 Producer BUTEX Country Belarus Top material genuine chrome leather (1.4-1.6) + high-strength nylon fabric 1680D Lining material laminated mesh Sole fastening adhesive Metal arch support Toe and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1, (Italy) Available size range 40-46 Shoe color black Valve type deaf valve Protection with overlays made of high-strength Matrix leather with PU coating (Italy). toe

OMON winter boots, in which high (24 cm) berets are made of natural chrome leather 1.6 mm thick, with a flexible sole made of thermoplastic plastic, equipped with a large embossed tread and insulation made of high-quality natural sheepskin - these are exactly the shoes that law enforcement officers need , professional tourists and everyone who is fond of outdoor activities. The toe and heel of the boot are reinforced with thermoplastic material to keep their shape. In this model, a lacing system is used, in the upper part of which there are two pairs of metal loops that allow you to quickly take off and put on shoes without removing the laces from the loops. The deaf valve prevents dirt, snow, sand and other foreign objects from getting inside the boot. This model is a godsend for people with a high instep. Top: genuine chrome leather (1.4-1.6 mm). Lining: natural sheepskin. Outsole: TEP (±40°C), 2050. Outsole fastening method: gluing. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 36-50. The deaf valve protects a foot from influence of environment (dust, water, dirt). Hooks. Soft edge. Black color. Weight: 840 gr. Technical characteristics Boots of army type (Berets). Model Omon 905 Producer BUTEX Country Belarus Top material genuine chrome leather (1.4-1.6 mm) Lining material natural sheepskin Sole fastening glue-and-piercing Metal arch support Toe and heel reinforced from thermoplastic material Sole material TEP (± 40 ° C), 2050 Available size range 36- 50 Shoe color black Valve type blind valve Soft piping present Hooks present

Winter boots Pilot with a low (18 cm) beret and elastic sole made of polymer material, which has the properties of rubber (TEP) - perfect for outdoor activities, as work shoes and long walks. The top of this model is made of genuine chrome leather 1.6 mm thick, and is used as a heater. natural fur sheepskin. The toe and heel of the boot are reinforced with a special thermoplastic material to keep their shape. The outsole has a tread pattern for a secure grip on any surface. To prevent snow and foreign objects from getting inside the boot, Pilot boots are equipped with a semi-deaf valve. For greater reliability, the sole in this model is stitched around the perimeter, and the lower part of the ankle is attached to the vamp with a metal rivet. HIGH BOOTS Upper: natural chrome leather (1.4-1.6 mm) Lining: natural sheepskin. Sole: TEP (±40°С), 3521. Sole fastening method: gluing. Arch support: metal Toe cap and heel counter: reinforced thermoplastic material. Sizes: 36-50. Semi-deaf valve. Soft edge. Color: black Weight: 730 gr. Modifications: Model 180 faux fur. Specifications Boots. Model Pilot 181 Producer BUTEX Country Belarus Top material genuine chrome leather (1.4-1.6 mm) Lining material natural sheepskin Sole fastening glue-and-stitching Metal arch support Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C) 3521 Available size range 36-50 Shoe color black Valve type semi-deaf valve Soft piping present

Reliable demi-season boots with a khaki velor upper, in which the soft edge of the beret is made of durable nylon fabric with a density of 1000D, are in high demand among young men who lead an active lifestyle. Additional comfort is provided by a 3D nylon mesh lining. The undoubted advantages of this model are that the front of the boot is protected from mechanical damage and moisture by a Matrix leather overlay, and a deaf valve will not allow foreign objects to penetrate into the boot. The toe and heel of the boot are reinforced with a special thermoplastic material to keep their shape. It is possible to use a special water-repellent impregnation, which will further increase the performance of the boots in difficult weather conditions. The high lacing system allows you to securely fix the model on the leg, which is very important when walking on rough terrain. ATTACK BOOTS OF URBAN TYPE Combined top: velor (1.3-1.5 mm) + 100% cotton (density 350g/m2). Lining: laminated mesh. Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 40-46. Semi-deaf valve. Soft edge. Color: olive. The toe and heel part are reinforced with leather with high-strength PU coating "Matrix" (Italy). Weight: 610 gr. Specifications Assault boots. Model Mongoose 24041 Producer BUTEX Country Belarus Top material velor (1.3-1.5 mm) + high-strength nylon fabric 1000D Lining material laminated mesh Sole fastening adhesive Metal arch support Toe and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1, (Italy) Available size row 40-46 Shoe color olive Valve type semi-blind valve Soft edging present Protection with overlays made of high-strength Matrix leather with PU coating (Italy). toe + heel

HIGH BOOTS Upper: natural chrome leather (1.4-1.6 mm). Lining: natural lining leather. Outsole: TEP (±40°C), 2050. Outsole fastening method: gluing. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 36-46. The deaf valve protects a foot from influence of environment (dust, water, dirt). On the inner side of the beret there is a “Lightning” clasp. Color: black. Weight: 755 gr. Sole fastening glue-and-piercing Metal arch support Toe and heel reinforced from thermoplastic material Sole material ТЭП (±40°С), 2050 Available size range 40-46 Shoe color black Valve type blind valve Molded zipper on the inside of the shoe present

The top of this model of boots is made of special combined fabrics: the vamp is made of hydrophobic leather 1.8 mm thick; high (23 cm) berets - made of durable nylon fabric with a density of 1000 D. The lining is made of moisture-wicking Cambrel fabric, which is not subject to abrasion and decay. The heel and toe of the boot are reinforced with thermoplastic material to increase reliability and shape retention. The rubber sole with a large relief protector is attached to the boot using an adhesive method. The design of the upper part of the powerful high lacing system with five pairs of metal loops allows you to quickly put on and take off the shoes. The presence of a deaf valve in this model prevents any foreign objects from entering the boot. This model is very reliable and practical, and therefore extremely popular among law enforcement officers and people who are fond of outdoor activities. BOOTS WITH HIGH TIRES Top combined: hydrophobic leather (1.2-1.4 mm), “DRYWALK SYSTEM” (R) (CJSC “RUSSIAN KOZHA”) + high-strength fabric made of non-textured 1680D nylon thread. Lining: non-woven, abrasion-resistant and quick-drying high density (150gsm). Sole: rubber of increased wear resistance (Italy), PANAMA. Sole attachment method: adhesive. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 40-46. The deaf valve protects a foot from influence of environment (dust, dirt). Speed ​​lacing. Soft edge. Black color. In the heel part of the berets there is a shock-absorbing insert. Weight: 720 gr. Specifications Lightweight ankle boots. Model Kalahari 1411 Producer BUTEX Country Belarus Upper material hydrophobic leather (1.2-1.4 mm), DRYWALK SYSTEM® (CJSC RUSSIAN KOZHA) + high-strength nylon fabric 1680D Lining material hygroscopic and wear-resistant fabric (150 g/m2) Sole fastening adhesive Arch support metal Toe cap and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance PANAMA, (Italy) Available size range 40-46 Shoe color black Lacing type speed lacing Valve type deaf valve Soft edging is present

Lightweight boots are made of full grain leather. Valve and edge claim. leather. Even with tight lacing, movement over long distances will be easy and comfortable. The polyurethane sole is stable on various surfaces, whether it is wet grass in the forest or smooth stones in the mountains, they are not afraid of temperature changes and perform well in winter conditions. Sizes: 40-46 Berets height -24.5 cm Gender: male Season: winter Main color: black Upper material: natural front chrome leather, tongue made of faux leather Lining detail material: natural wool (70% wool, 30% PE) Bottom detail material: thermoplastic elastomer TEP (Cross) Sole attachment method: glue-stitched Shoe type: berets Size chart cm 22.5 23 23.5 24.5 25 25.5 26.5 27 27.5 28.5 29 29.5 30.5 31 Russian size (RUS) 35 36 37 38 39 40 41 42 43 44 45 46 47 48 EUR 36 37 38 39 40 41 42 43 44 45 46 47 48 49 UK 3.5 4 5 6 6.5 7.5 8 9 9.5 10.5 11.5 12 13 13.5 Sizing Determine your size as follows: Place your foot on a blank piece of paper. Mark the extreme borders of the foot. Measure the distance between the outermost points of the foot. Find the appropriate size in the table above.

ASSAULT BOOTS OF URBAN TYPE Continuation of the legendary "COBRA" series. Used in all special divisions of the Russian Federation Top combined: hydrophobic leather (1.2-1.4 mm), “DRYWALKSYSTEM” (R) (CJSC “RUSSIAN KOZHA”) + elastic genuine leather on the top. Lining: merino wool Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 38-46. A deaf valve protects the leg from environmental influences (dust, dirt) On the inside of the berets there is a molded “Lightning”. High-speed lacing. Color: black. Weight: 570 gr.

Top material - Thickened natural chrome leather Lining - Cowhide leather lining (genuine leather) Sole - Molded from special. rubber, heat-resistant, petrol- and oil-protective Method of attaching the sole - doppelno-adhesive (similar to welt-stitched with reinforced heel fastening with brass nails) on D hinges (NATO type) Toe cap - Reinforced from thermoplastic material (TM) Heel counter - Rigid, molded Arch support - Metal Sizes -39-47 * The manufacturer reserves the right to make changes to the design, materials and equipment without prior notice to the consumer

Chrome boots with high berets, enlarged soft piping and deaf valve made of eco-leather, reinforced toe cap made of thermoplastic material, hard back made of thermoplastic material. Recommended for employees of security structures, suitable for outdoor activities. Height: 220 ± 3 mm Gender: male Season: summer Main color: black Material of the upper part: genuine leather of chrome tanning Material of the lower part: sole - thermoplastic elastomer (TEP) "RAMPON" Method of attaching the sole: bead stitching Type of footwear: ankle boots Size chart cm 22 ,5 23 23.5 24.5 25 25.5 26.5 27 27.5 28.5 29 29.5 30.5 31 40 41 42 43 44 45 46 47 48 49 UK 3.5 4 5 6 6.5 7.5 8 9 9.5 10.5 11.5 12 13 13.5 Finding your size Determine your size as follows: Place your foot on a clean piece of paper. Mark the extreme borders of the foot. Measure the distance between the outermost points of the foot. Find the appropriate size in the table above.

Lightweight summer boots with durable uppers cotton fabric Black color and flexible rubber outsole with embossed tread will provide you with comfort and reliable traction on any surface. The front and back of the boots have a special velor finish that protects against mechanical damage. The toe and heel of the boot are reinforced with a special thermoplastic material for better retention of the outer shape. D-shaped fittings in the lacing system allow you to quickly take off and put on the boot without removing the laces from the loops, allowing you to remove and put on the boot without the help of lacing. The presence of a deaf valve protects against the ingress of any foreign objects into the boot. This model is very popular among law enforcement officers and people who are fond of outdoor activities. Legendary and favorite boots TM "BUTEKS" COBRA m.12100 now with a convenient zipper, which makes the process of putting on shoes faster than ever. The zipper will not become a supply link, as it is specially molded with a bend to eliminate critical loads even if you are squatting. Boots are suitable for any type of activity, from driving a car to trekking. The best choice for warm weather. ASSAULT BOOTS OF THE URBAN TYPE The legendary boot, which is used by all power structures of the Ministry of Internal Affairs of the Russian Federation. (SOBR, OMON, "GROM"). The best choice for spring summer season. The model has been the best summer boot for more than four years, according to many employees of special units. Passed tests in all special units of the Russian Federation, and the Republic of Belarus. Received only the highest marks, including the level of comfort. It goes well with camouflage and sand-colored clothing. Top combined: velor (1.3-1.5 mm) + 100% cotton (density 350g/m2). Lining: unlined. Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 38-46. The deaf valve protects a foot from influence of environment (dust, dirt). On the inside of the birch is molded “Lightning”. High-speed lacing. Color: black. Weight: 600 gr. /m2), dubbed with cotton calico Lining material unlined Sole fastening glued Instep metal Toe and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1, (Italy) Available size range 38-46 Shoe color black Lacing type speed lacing Valve type closed flap Molded zipper on the inside of the shoe

ASSAULT BOOTS OF THE URBAN TYPE Upper: hydrophobic leather (1.2-1.4 mm), “DRYWALKSYSTEM” (R) (CJSC “RUSSIAN KOZHA”) Lining: printed wool fur (merino). Sole: 2-layer (rubber + PU), BUTEK 3. Sole attachment method: adhesive. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 40-46. The deaf valve protects a foot from influence of environment (dust, dirt). Speed ​​lacing. Black color. The toe part is reinforced with leather with high-strength PU coating "Matrix", (Italy). Weight: 600 gr. Specifications Assault boots. Model Cobra 12034 Producer BUTEKS Country Belarus Top material hydrophobic leather (1.2-1.4 mm), DRYWALK SYSTEM® (CJSC RUSSIAN KOZHA) Lining material printed woolen fur (merino) Sole fastening glued Instep support metal Toe and heel reinforced from thermoplastic material Sole material 2-layer: rubber + PU BUTEK 3, (Italy) Available size range 40-46 Shoe color black ). toe

Lightweight assault boots with a durable cotton upper and a flexible rubber sole for use in the summer. The manufacturers additionally finished the front and back of this model with velor to increase the protection of the boots from accidental mechanical damage. In addition, a special thermoplastic material is inserted into the heel and toe of this model to maintain the external shape. The assault boots are equipped with a lacing system consisting of eight pairs of D-shaped half rings, which make it possible to significantly facilitate and speed up the process of lacing and unlacing the boots, which does not require removing the laces from the loops. The deaf valve is a reliable protection of the feet from foreign objects getting inside the boot. This model was created taking into account the increased requirements for footwear imposed by representatives of various law enforcement agencies and specialists from units involved in the elimination of emergencies. ATTACK BOOTS OF URBAN TYPE Combined top: velor (1.3-1.5 mm) + 100% cotton (density 350g/m2). Lining: unlined. Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 38-46. The deaf valve protects a foot from influence of environment (dust, dirt). Speed ​​lacing. Black color. Weight: 600 gr. modification "COBRA zip" model 12311 with zipper Technical characteristics Assault boots. Model Cobra 12100 Producer BUTEX Country Belarus Top material velor (1.3-1.5 mm) + 100% cotton (density 350 g/m2), doubled with cotton calico Lining material unlined Sole fastening glued Instep support metal Toe and back reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1, (Italy) Available size range 38-46 Shoe color black Lacing type speed lacing Valve type deaf valve

Thermoplastic toe cap and heel counter. The height of the berets is 27 cm. Gender: male Season: summer Main color: black Material of the top part: genuine embossed leather + Oxford 600D Material of the part of the lining: unlined Material of the part of the bottom: sole - thermoplastic elastomer (TPE) Method of attaching the sole: bead stitching Type of shoes: ankle boots Size Chart cm 22.5 23 23.5 24.5 25 25.5 26.5 27 27.5 28.5 29 29.5 30.5 31 8 39 40 41 42 43 44 45 46 47 48 49 UK 3.5 4 5 6 6.5 7.5 8 9 9.5 10.5 11.5 12 13 13.5 Sizing Determine your size as follows: Place your foot on a clean sheet of paper. Mark the extreme borders of the foot. Measure the distance between the outermost points of the foot. Find the appropriate size in the table above.

Boots are BIG! Need to take a size smaller. If you wear size 43, you should choose size 42 accordingly. HIGH BOOTS Upper: genuine leather (1.4-1.6 mm). Lining: non-woven, abrasion-resistant and quick-drying high density (150gsm). Sole: TEP (±40°С), BUTEK 8. Sole fastening method: adhesive. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 40-45. The deaf valve protects a foot from influence of environment (dust, water, dirt). Universal lacing. Soft edge. Black color. In the heel part of the berets there is a shock-absorbing insert. Weight: 605 gr. Technical characteristics Boots of army type (Berets). Model Okhotnik 5021 Producer BUTEKS Country Belarus Top material genuine chrome leather (1.4-1.6 mm) Lining material hygroscopic and wear-resistant fabric (150 g/m2) Sole fastening adhesive Instep support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C) ) BUTEK 8 (Italy) Available size range 40-45 Shoe color black Lacing type universal lacing Valve type deaf valve Soft piping present Shock-absorbing insert in the heel of the berets present

OMON winter boots, in which high (24 cm) berets are made of genuine chrome leather 1.6 mm thick, with a flexible sole made of thermoplastic plastic, equipped with a large embossed protector and insulation made of high-quality printed wool fur with a content (70%) of sheepskin - this is exactly those shoes that are necessary for employees of law enforcement agencies, professional tourists and everyone who is fond of outdoor activities. The toe and heel of the boot are reinforced with thermoplastic material to keep their shape. In this model, a lacing system is used, in the upper part of which there are two pairs of metal loops that allow you to quickly take off and put on shoes without removing the laces from the loops. The deaf valve prevents dirt, snow, sand and other foreign objects from getting inside the boot. This model is a godsend for people with a high instep. For greater comfort in this model, the toe and heel of the sole are raised, which creates a comfortable walking experience. Upper: genuine chrome leather (1.4-1.6 mm) Lining: printed wool fur Sole fastening method: glue-stitched Instep: metal Toe and heel counter: reinforced from thermoplastic material Sole: TEP (±40°С) 2050 Size: 36-50 Color: black . Weight: 840 g Deaf valve protects the foot from environmental influences (dust, water, dirt). Hooks. Soft edge. Technical characteristics Boots of army type (Berets). Model Omon 907 Producer BUTEX Country Belarus Top material genuine chrome leather (1.4-1.6 mm) Lining material printed woolen fur (merino) Sole fastening glue-and-stitching Metal arch support Toe and heel reinforced from thermoplastic material Sole material ТЭП (±40°С), 2050 Available size range 36-50 Shoe color black Valve type blind valve Soft piping present Hooks present

AVIATOR winter boots are the basic model of high winter boots(24 cm) from BUTEX, which uses a sole made of TEP (thermoplastic elastomer), with an upper made of very durable genuine chrome leather 1.6 mm thick and natural sheepskin insulation. Sheepskin perfectly warms, is not afraid of moisture, does not fall off and does not wipe. For reliable fixation of the foot, this model uses a high lacing system, and for greater comfort, this model has a neatly sewn-in zipper on the inside of the berets, closed from the inside with a leather valve and allowing you to quickly put on / take off the boots without lacing. The toe and heel of the boot are reinforced with thermoplastic material to keep their shape. The deaf valve prevents dirt, snow, sand and other foreign objects from getting inside the boot. On the top of the heel there is a special loop for easy shoeing. This model is a godsend for people with a high instep. The numerous advantages of these AVIATOR winter boots were highly appreciated by law enforcement officers, professional tourists and everyone who is fond of outdoor activities. HIGH BOOTS Top: natural chrome leather (1.4-1.6 mm) Lining: natural sheepskin Sole: TEP (±40°С), 2050. Sole fastening method: glue-stitched Arch support: metal Toe and heel counter: reinforced from thermoplastic material. Sizes: 40-47. Deaf valve. On the inside of the beret there is a “Lightning” clasp. Color: black. Weight: 845 gr. Specifications natural sheepskin Glue-and-sewn sole fastening Metal arch support Toe and heel reinforced from thermoplastic material Sole material TPE (±40°C), 2050 Available size range 40-47 Shoe color black

Lacing is the oldest method of joining materials and tightening shoes and garments. It would seem that the laces are uncomfortable and unreliable. To put on a shoe with a lace, you need to perform a whole ritual: untie the lacing, put on the shoe, tighten the lacing and fix the ends with a knot. Laces tend to break at the most crucial moment. But, despite the listed shortcomings, lacing can be found anywhere today. These are footwear, and elements of sports, tourist and military equipment, as well as civilian and military clothing. But there are many alternatives to laces! Why is lacing still used, and everywhere?

Lacing - it does not happen more reliably!

In fact, a full-fledged alternative to lacing has not yet been invented. Take the same "lightning". It allows you to fasten or unfasten the boot very quickly, but as soon as a crust of ice appears on it or dirt gets into it, it becomes completely non-functional. Replacing a broken zipper is not easy, especially in the field. In addition, the lacing has a tightening effect. The zipper does not allow you to fit the leg, but the lace does. That is why military boots, if they are made with a "lightning", then it is paired with lacing.

And it’s quite difficult to compare lacing with fasteners on contact tape Velcro. Yes, on the basis of this latch, fasteners were invented that allow you to pull shoes well. And Velcro itself fixes fasteners very well even under load. However, Velcro has its own limited working life and it will be difficult to replace a used Velcro, moreover, fasteners with such a lock are afraid of moisture, and dirt makes them absolutely useless.

Shoelaces for berets. How to choose?

So it turns out that the lace today has no alternative. But it is important to understand that the lace is different. And how difficult it is to buy high-quality laces for berets today, every owner of military shoes knows. The problem is that the market is littered with cheap domestic and Chinese laces. Sometimes products unsuitable for serious tasks are easy to recognize - they can be seen with the naked eye. Such laces stretch, they do not have a high-quality, dense cord, the textile sheath creeps along the cord, wrinkles, and drives under the fingers.

For lacing military boots, round cords are usually used with a core of cotton or artificial fibers in a dense braid. The thickness of the laces is up to 5 mm. Such laces do not wear out for a long time and rarely break when tightening the lacing, because usually the sheath breaks first, but not the cord. The wear of the braid of the lace is a signal to replace it. However, such a lace does not have to be changed immediately, although from the outside the lacing already looks unaesthetic.

Camouflage ru offers to buy inexpensive, high-quality, reliable and durable shoe laces.