Booties sneakers are so mesmerizing with their magnificence. How can such little feet wear sneakers. Even a needlewoman who does not have kids yet will gladly start studying patterns and try a couple and knit. What can we say about simple and pleasant gifts.

So we saw these tiny sneakers, start knitting. And do not be confused by the numerous labels on sneakers.

There is not a single seam, the only exception is decoration- the detail is knitted in one breath. If you don't believe it, then read on. complete description charming model.

All the best for a child. This applies not only to food, but also to things. Everything that touches the skin of the baby should be hypoallergenic. Things should be soft, pleasant to the body. Winter have good thermal qualities. That is why it is so difficult to find the right yarn for the baby.

Knitting needles for knitting booties - this is the right size, which always depends on the yarn and on how many threads the product will be made. Most often, booties are knitted with stocking needles.

Sample

Before creating booties, you can knit a small sample. Despite the fact that the booties themselves may be even smaller than the sample, this still does not cease to be important. After all, the meaning of the sample is the right set of loops for booties. Next, we measured the length of the baby's foot, measured the circumference of the baby's legs in several places. Be sure to measure several places so that the elastic does not press.

Booties should not turn out small - it is very harmful to pass the blood vessels to the child. Yes and too big size will not be comfortable, especially for mom. You will need to constantly put them on and pull them up.

How to count the number of loops

Sample knit according to the pattern of the booties. A little more than 10 by 10 cm is enough.

An example of how to cast on knitting needles:

Then the loops are transferred to 1 knitting needle, and the necessary pattern is knitted with the other.

Then attach the ruler vertically and horizontally and determine how many loops and rows contain 10 cm of the ruler. Convert to the circumference and length of the foot indicators.

You can use a small formula:

• x is an unknown variable;
• A-circumference in cm;
• B-number of loops by density;
• 10 is the cm in which the density is contained.

Models: booties sneakers knitting

Very beautiful models booties with knitting needles. They evoke the desire of the master to create them right now. And the work will not allow you to get tangled in the loops. The product is so easy to knit that sometimes it seems the most simple model socks are harder.

After reading the material, the knitting master will appreciate the advantages of these models, because there is practically not a single seam here, and the exception can only be in company badges and other decorations of the finished product. Then 2 models of trendy booties, from which the soul is warmer. Explanation and description of every detail on the way to the creation of "little socks".

Sneakers moccasins for a child

A nice color combination that can always be changed. Such a model is suitable for a boy, but girls can be made instead of blue in a dark pink color or any other combination that the master and the baby like.

For work you will need:

• 50 g of children's yarn in two colors;
• knitting needles number 3.

Sole

You can resize as needed. By adding the initial set, the width of the booties is adjusted, but adding the middle rows will be responsible for the length of the product.

It is better to knit with a garter stitch and in two threads - this way the product will be more dense and soft. The sole itself will turn out with small scars - this defect will eliminate the hook. Just around each sole you need to walk a series of single crochets. This will create a neat and rounded arc.

Platform

Thread gray color Cast on stitches in garter stitch (not stitches, but extreme stitches with knitting needles) and knit 4 rows of garter stitch. Loops do not close.

toe

From 6 loops of the center of the toe, start knitting the toe of the sneaker. Knit rows with gray garter stitch. In this case, each edge is knitting two loops from the side knitting needles. This is how the connection and the gradual addition of the width of the toe happen. So knit 7-8 rows and change the thread.

Knit with a blue thread in the same way, but after 4 rows, start free swimming. That is, further it will not be necessary to cling to the sides of the sneaker. Just knit the label to the height of the desired length of the product. Then add a little loops and change the pattern to garter stitch. Knit with a new pattern for 3 rows and close the loops.

Sides

The remaining loops on the needles are the sides and knit in a garter stitch pattern. Decrease every 3 rows at the end and beginning of the row to get symmetry. Having reached the height of the product - close the loops.

Work for the hook: knit single crochets along the edge of the sides, make several loops for the lace (this is 2 air loops and again columns). Crochet and gray yarn to make a set of loops for the laces. Knit a row with connecting posts and the lace is ready. Make the second the same length.

Lace up the product. You can crochet small ovals and sew them with contrasting threads with cross stitches. Here are the updates.

Important! The product will turn out warmer if, in addition to the sole, a fleece footprint is sewn. This fabric will not only make you warmer, but also very pleasant to the body, like a warm fleece.

Booties with white laces

Nice sneakers with factory laces look even more appetizing. In creation, they are a little simpler than the first option in that they do not require tying a hook. Yes, the patterns are slightly different.

For work you will need:

• white yarn and of blue color;
• knitting needles No. 3.

You need to knit the product with a double thread. The model is very similar to the previous one and the sole is knitted in the same way according to the above diagram. The platform is also made in garter stitch. And here is the first difference. The toe of the booties is not knitted from the middle 6 loops.

All loops of the toe begin knitting - this is 20 loops of the front. Knit rows in stockinette stitch, and decrease on each row. First, knit through the loop two together. So do 4 times. Then in each row two together and so the whole row. After knitting the toe, change the thread and knit a label in blue for the desired height of the sneaker. Close label loops. Go to the sides. Knit in a semicircle with blue yarn to the desired height.

Knit the last three rows: purl, front, purl and close the loops. Thread the laces straight into the purl of the sides and the booties are ready. No seams and no crochet - just needles and yarn.

These two models are simple and so charming that many needlewomen probably produced a sea of ​​\u200b\u200bsuch wonderful socks. No wonder it is these models that the search engine will give out among the most fashionable booties. For a child, they can become the first shoes, and maybe the baby will take his first steps in your booties. Knit and get inspired fashion ideas and inspire others with your skill. All cool booties.

Knitting technique is different, it can be used in different styles and types of clothing. Now most of the accessories and additions to the image are made with knitting needles or crochet. Even comfortable and soft indoor shoes can be created using threads and patterns. Interesting booties, sneakers, knitted, will be able to decorate the wardrobe of both an adult and a child. A little desire and imagination - and an interesting thing created by your own hands is ready.

Shoes for adults

The scheme is universal, but the choice of yarn will help diversify the style. If you pick up a dense and lush thread for work, then shoes can be used in cold weather. For summer season cotton yarn of different shades is suitable. The model is designed for size 38-39. To make the sole bigger, you need to add loops (depending on the quantity by 5 centimeters of knitting).

Material preparation

For knitting you will need:

Knitted needles sneakers with diagrams and descriptions are made using several types of patterns. The front surface is used to fill the main part of the work in a circle, the wrong side is used to transition between colors, as well as to create a pattern. The shawl type of knitting combines alternating rows of purl and front parts. To narrow and shape the technique, an elastic band is performed with alternating two loops of front and back. To enlarge the knitting, the craftswomen advise to increase the number of loops by an odd number, to reduce the pattern, you can perform an elastic band with alternating one front and back links.

Description of work

In order to make knitted sneakers with knitting needles according to the description, white yarn is used first. Cast on 76 warp stitches (with 50% wool content) and distribute on 4 needles. In the process, it is important to follow the first loop of the row, since it is calculated from it by the number of parts and the type of their execution. It is necessary to mark the beginning of knitting with a marker. The warp row is knitted with purl links with a slight tightening of the thread.

Next, you need to work out a red stripe, highlight the shape of the foot, for this they switch to another yarn and make a series of purl and facial loops. When the line is finished, they switch to a white thread. Beginning needlewomen in the knitting process should be careful and try to knit all the loops of the same size, checking the thread tension from time to time. When switching from one color to another, do not make knots, but change the thread with a connecting loop behind the back wall.

The next four rows are made with a handkerchief pattern. It is necessary to count six central loops and knit a small rise there: 5 front links, then knit the sixth with the next one and make a broach (remove the front loop and stretch an additional link through it).

Turn the knitting over, make a crochet so that it is convenient to turn the knitting needles over, knit five loops as usual, stretch the sixth together with the next over the back wall. Turn the work again, make a lifting element, six links behind the front wall of the base. Knitting in this way continues until the required number of loops is dialed (12 lifting links).

Knit a row from the wrong side, perform a new one with one lifting loop and 12 facial loops, mark 30 central links with a marker, they must be counted from the total number of pending parts on other knitting needles. Work on the side details begins with the yarn and facial elements. The next stitches in the row are worked handkerchief pattern with alternating knitting of holes (elements with broaches) for laces.

Decreases begin in the next rows. To do this, two links are knitted together for one wall of the base loop, the decrease must be repeated ten times. The remaining 34 stitches are knitted in rows with alternating red and white yarn to create a pattern. After execution, roundings are made by creating broaches. You need to repeat them for several rows, then close the knitting with loops.

For assembly, needlewomen are advised to use a hook and yarn, which the process was performed, but it can be difficult for novice craftswomen to combine elements in this way, so there is an option for stitching with a needle.

Crocheted parts are connected with ordinary loops. The finished product is glued to the sole, you can make firmware to the rubber with an awl for greater reliability. To knit sneakers with knitting needles, descriptions and diagrams will not be enough, you must additionally download video tutorials for clarity. Detailed step by step process The work is simple, even a novice needlewoman can handle it.

Knitting children's sneakers

The running model is suitable for children from two years old with a foot length of 14 centimeters. The process uses a blue mixed composition thread, approximately 50-60 g, similar yarn white color in the same amount, knitting needles and hook number two. You can optionally use a marker to indicate the location of the yarn transition.

Step-by-step instruction

The process is carried out in stocking and garter stitch with the transition to neutral rows of purl and facial loops. A similar method is used to make sneakers for newborns. In order for the baby to feel comfortable, it is necessary to monitor the density of the loops and not to overtighten the thread in the process. A simple master class will help you avoid mistakes when creating children's shoes:

In this part, the number of elements should be at least sixteen, make two rows on the sides with decreasing loops. The next step is to change the yarn to blue and knit the tongue of the product, the length of which is not more than 11 centimeters. To round the part, it is necessary to carry out uniform decreases in the loops on both sides.

Decrease schemes

The first loops are made on the front side, then in the next process the elements are crossed to create a slope in the pattern. At the end of the row, the part is reduced by dropping the link onto the base and knitting the broach. In the process, the front side is made with elements behind the front wall, and the wrong side behind the back. This is important in creating a pattern and uniformity of work.

The tongue is crocheted after completion, you can use lush columns for a visual increase or ordinary air loops for a delicate frame. Yarn for details use white for contrast.

From the 15th to the 21st row, work is done with stocking technique with inserts on the pattern (reduction and increase in links). Closer to the top of the product, an English elastic band is used to narrow it. Here, just as in adult models, the technique is used: two loops of front and back, followed by alternation. After completing all the edges of the product, you need to crochet with crochet stitches using yarn of a different shade.

For reliable attachment of the sole, it is necessary to glue the base and additionally attach with an awl the junction of the fabric and rubber. It is not difficult to make beautiful knitted sneakers with knitting needles for a child; even a novice needlewoman can cope with the task.

The standard length of the sole in work is no more than 13 centimeters. It is recommended to use yarn with an admixture of wool for the density of loops and circular needles so that the hinges of the parts do not slip off the base. Stages of work:

For the sole, a base length of twelve strips is suitable. But if thin yarn was used for the sock, then the amount can be large. Four loops are cast along the sidewalls and pulled together with a tongue using a hook and connecting posts. The links are carried out on the front side behind the front walls of the base.

On the needles, you should get 38 links, which are knitted with decreases in even rows. For laces, the holes are knitted through three loops with broaches, you can make the holes smaller or do without using crochet connecting components. At the end, the sole is sewn together with the rest of the product, you can additionally decorate the booties with interesting flowers or multi-colored circles.

Applications

You can use shoes made by yourself with the help of threads and knitting needles not only at home, but also for everyday wear. In this case, the threads are selected more dense, and the loops are pulled tighter. A solid rubber sole with lateral rises is selected as the base so that the knitted base can be protected from rain and dust.

For home use Knitted warp sandals are becoming more and more popular., the execution scheme is suitable for both a man and a woman, since the pattern is universal. On average, no more than five hours are spent for work, along with the assembly of parts. In this way, you can create comfortable slippers for everyday indoor wear.

Knitted things help make life more varied and comfortable, and handmade shoes give warmth and love.

Attention, only TODAY!

Women's sneakers, slippers, knitted.

Translation: Lelya Mom's pens.rf.

Sizes 35-39 (40-44).

To knit slippers with knitting needles, you will need:
yarn Novita 7 Veljestä (75% wool, 25% polyamide, 300 m / 150 g);
hosiery knitting needles No. 3 - for socks;
stocking knitting needles No. 3.5 - for the sole;
hook number 3.

Abbreviations used:
circle.r. - circular row
decrease to the left = 2 p. knit together with a broach: remove 1 p., as persons., knit the next p. and stretch it through the removed p.
vp - air loop
ss - connecting post
sc - single crochet
ssn - double crochet

How to knit sneakers-slippers with knitting needles.
We knit a cuff.

On stocking needles No. 3, dial 48 stitches for size 35-39 and (56 stitches for size 40-44) and distribute them on 4 knitting needles, 12 (14) stitches on each.
Knit 10 round. with a 1x1 elastic band, so that you have a strip of 4 persons left. on the back of the cuff and a strip of 2 persons. on the front of the cuff, i.e.:
1st knitting needle: 2 persons., x5 (x6)
2nd spoke: x6 (x7)
3rd spoke: x6 (x7)
4th knitting needle: x5 (x6), 2 persons.

For next. 13 rounds:
- continue knitting the front as before, and make 2 vertical strips from the back. p., next way:
1st knitting needle: 2 persons., 1 out., 9 persons. (11 persons)
2nd knitting needle: 2 persons., x5 (x6)
3rd needle: x5 (x6), knit 2.
4th knitting needle: 9 persons. (11 persons.), 1 out., 2 persons.

We knit the heel.
Knit 1 more circle. and then move all loops from the 1st needle to the 4th, then knit only on these loops.
Turn the work, in each row, remove the 1st p. Not knitted, tie 24 (28) rows of faces. satin stitch continuing to knit vertical stripes out. n. through the entire heel.

Heel turn.
Remove 1 p. and knit faces. stitch to 7 (9) sts on the left, decrease to the left and turn your work.
Remove 1 p. and knit faces. stitch to 7 (9) p. on the left, 2 out. together, turn your work around.
Remove 1 p. and knit faces. stitch to 6 (8) sts on the left, decrease to the left and turn your work.
Continue like this until 12 sts remain.

Knit 1 more row on these 12 sts (slip 1 st, k11).
Using a free needle, pick up 13 (15) sts along the heel and knit them behind the back wall.
Continue rib knitting on the 2nd and 3rd needles as before, knitting the last stitch together with the loop of the raised 13 (15) stitches until they run out.
Divide 12 sts of the heel in half, on the 4th and 1st knitting needles, 6 + 6.

Continue in stockinette stitch on the 1st and 4th needles, and in rib on the 2nd and 3rd needles as before (until the toe decreases)
Decrease for the toe at the end of the 1st knitting needle (k2 together) and at the beginning of the 4th (decrease to the left) in each row until there are 12 (14) sts left on each knitting needle.

Start forming the toe when, with the desired length of the cuff, the little finger is completely hidden.

We knit a toe.
1st and 3rd knitting needles: persons. until last 3 p., 2 persons. together, 1 persons.
2nd and 4th knitting needles: 1 person., decrease to the left, persons. all remaining p.
Decrease every 2nd round until 7 (8) sts remain on each needle, then decrease every round. When there are 2 sts left on each needle, cut the thread and pull through the remaining loops and tighten well and fasten from the inside out.

Straps with holes for laces.
Make slats at the front (top) of the sock. Raise every 2nd st along the edge of the beginning of the elastic, starting from the cuff to the toe.

Knit 4 rows of faces. satin stitch. We begin to knit faces. R. (one bar from cuff to toe, another bar from toe to cuff).
Row with holes: *2 persons. together, yarn over, 2 persons. *
Knit 1 more row. and close all loops.

Knit 2 laces approx. 140 cm.
Cast on 2 sts on a stocking needle. Knit the loops of faces., passing the thread for work, starting from the first loop, continue to the desired length, approx. 140 cm.

With the help of a hook (or needle, chain stitch) make decorative stripes on the back of the sock and along the edges of the slats.

We knit the sole of slippers-shoes with knitting needles.
Notes: crochets are needed for holes in the sole.

For size 35-36
On stocking knitting needles No. 3.5, dial 8 p. And knit 93 rows of stocking stitch, next. way:
Row 1: 8 persons. (then always remove the 1st loop not knitted)
Row 2: 3 persons. (i.e. remove 1 p., 2 persons.), nakid, 2 persons., nakid, 3 persons.
Rows 3-4: all persons.
Row 5: K3, yarn over, knit 4, yarn over, knit 3.
Rows 6-17: all knits.
Row 18: K4, yarn over, knit 4, yarn over, knit 4.
Rows 19-31: all persons.
Row 32: K4, yarn over, knit 6, yarn over, knit 4.
Rows 33-45: all persons.
Row 46: K4, yarn over, knit 8, yarn over, knit 4.
Rows 47-56: all persons.

Rows 58-79: all persons.
Row 80: K1, K2. together, 14 persons., 2 persons. together, 1 persons.
Rows 81-82: all persons.
Row 83: K1, K2. together, 12 persons., 2 persons. together, 1 persons.
Rows 84-85: all persons.
Row 86: K1, K2. together, 10 persons., 2 persons. together, 1 persons.
Rows 87-88: all persons.
Row 89: K1, K2. together, 8 persons., 2 persons. together, 1 persons.
Rows 90-91: all persons.
Row 92: K1, K2. together, 6 persons., 2 persons. together, 1 persons.
Row 93: Knit all, cast off.

Knit the sides of the sole
Check the chart on the right to see how many sts from the edge of the sole to pick up. Knit with white yarn. Knit 7 rows. Knit out. all toe loops and faces. rest. Start by moving all the toe stitches (13+10+13) on one needle to get a neater look.



For size 37-38
On stocking knitting needles No. 3.5, dial 8 p. And knit 98 rows of stocking stitch, next. way:


Rows 3-4: all persons.

Rows 6-18: all knits.
Row 19: K4, yarn over, knit 5, yarn over, knit 4.
Rows 20-33: all persons.
Row 34: K4, yarn over, knit 7, yarn over, knit 4.
Rows 35-48: all persons.
Row 49: K4, yarn over, knit 9, yarn over, knit 4.
Rows 50-60: all persons.
Row 61: K4, yarn over, knit 11, yarn over, knit 4.
Rows 62-84: all persons.
Row 85: K1, K2. together, 15 persons., 2 persons. together, 1 persons.
Rows 86-87: all persons.
Row 88: K1, K2. together, 13 persons., 2 persons. together, 1 persons.
Rows 89-90: all persons.
Row 91: K1, K2. together, 11 persons., 2 persons. together, 1 persons.
Rows 92-93: all persons.
Row 94: K1, K2. together, 9 persons., 2 persons. together, 1 persons.
Rows 95-96: all persons.
Row 97: K1, K2. together, 7 persons., 2 persons. together, 1 persons.
Row 98: Knit all, cast off.

Knit the sides of the sole
Check the chart on the right to see how many sts from the edge of the sole to pick up. Knit with white yarn. Knit 7 rows. Knit out. all toe loops and faces. rest. Start by moving all the sts of the toe (14+10+14) on one needle to get a neater look.
Close the loops without tightening with black thread.
You can use a hook to pick up the loops at the toe and heel.

For size 39-40
On stocking needles No. 3.5, dial 8 p. And knit 103 rows of stocking stitch, next. way:
Row 1: 9 persons. (then always remove the 1st loop not knitted)
Row 2: 3 persons. (i.e. remove 1 p., 2 persons.), nakid, 3 persons., nakid, 3 persons.
Rows 3-4: all persons.
Row 5: K3, yarn over, knit 5, yarn over, knit 3.
Rows 6-19: all knits.
Row 20: K4, yarn over, knit 5, yarn over, knit 4.
Rows 21-35: all knits.
Row 36: K4, yarn over, knit 7, yarn over, knit 4.
Rows 37-51: all persons.
Row 52: K4, yarn over, knit 9, yarn over, knit 4.
Rows 53-64: all persons.
Row 65: K4, yarn over, knit 11, yarn over, knit 4.
Rows 66-89: all persons.
Row 90: K1, K2. together, 15 persons., 2 persons. together, 1 persons.
Rows 91-92: all persons.
Row 93: K1, K2. together, 13 persons., 2 persons. together, 1 persons.
Rows 94-95: all persons.
Row 96: K1, K2. together, 11 persons., 2 persons. together, 1 persons.
Rows 97-98: all persons.
Row 99: K1, K2. together, 9 persons., 2 persons. together, 1 persons.
Rows 100-101: all persons.
Row 102: K1, K2. together, 7 persons., 2 persons. together, 1 persons.
Row 103: Knit all, cast off

Knit the sides of the sole
Check the chart on the right to see how many sts from the edge of the sole to pick up. Knit with white yarn. Knit 7 rows. Knit out. all toe loops and faces. rest. Start by moving all the sts of the toe (15+10+15) on one needle to get a neater look.
Close the loops without tightening with black thread.
You can use a hook to pick up the loops at the toe and heel.

For size 41-42
On stocking knitting needles No. 3.5, dial 8 p. And knit 108 rows of stocking stitch, next. way:



Rows 4-5: all persons.

Rows 7-22: all knits.
Row 23: K4, yarn over, knit 6, yarn over, knit 4.
Rows 24-38: all persons.
Row 39: K4, yarn over, knit 8, yarn over, knit 4.
Rows 40-54: all knits.
Row 55: K4, yarn over, knit 10, yarn over, knit 4.
Rows 55-67: all persons.
Row 68: K4, yarn over, knit 12, yarn over, knit 4.
Rows 69-92: all persons.
Row 93: K1, K2. together, 16 persons., 2 persons. together, 1 persons.
Rows 94-95: all persons.
Row 96: K1, K2. together, 14 persons., 2 persons. together, 1 persons.
Rows 97-98: all persons.
Row 99: K1, K2. together, 12 persons., 2 persons. together, 1 persons.
Rows 100-101: all persons.
Row 102: K1, K2. together, 10 persons., 2 persons. together, 1 persons.
Rows 103-104: all persons.
Row 105: K1, K2. together, 8 persons., 2 persons. together, 1 persons.
Rows 106-107: all persons.
Row 108: K1, K2. together, 6 persons., 2 persons. together, 1 person., close the loops.

Knit the sides of the sole
Close the loops without tightening with black thread.
You can use a hook to pick up the loops at the toe and heel.

For size 43-44
On stocking knitting needles No. 3.5, dial 8 p. And knit 113 rows of stocking stitch, next. way:
Row 1: 10 persons. (then always remove the 1st loop not knitted)
Row 2: all persons. (i.e. 1 p. remove, 9 persons.)
Row 3: K3, yarn over, knit 4, yarn over, knit 3.
Rows 4-5: all persons.
Row 6: K3, yarn over, knit 6, yarn over, knit 3.
Rows 7-23: all knits.
Row 24: K4, yarn over, knit 6, yarn over, knit 4.
Rows 25-40: all persons.
Row 41: K4, yarn over, knit 8, yarn over, knit 4.
Rows 42-56: all persons.
Row 57: K4, yarn over, knit 10, yarn over, knit 4.
Rows 58-69: all persons.
Row 70: K4, yarn over, knit 12, yarn over, knit 4.
Rows 71-81: all persons.
Row 82: K4, yarn over, knit 14, yarn over, knit 4.
Rows 83-97: all persons.
Row 98: K1, K2. together, 18 persons., 2 persons. together, 1 persons.
Rows 99-100: all persons.
Row 101: K1, K2. together, 16 persons., 2 persons. together, 1 persons.
Rows 102-103: all persons.
Row 104: K1, K2. together, 14 persons., 2 persons. together, 1 persons.
Rows 105-106: all persons.
Row 107: K1, K2. together, 12 persons., 2 persons. together, 1 persons.
Rows 108-109: all knits.
Row 110: K1, K2. together, 10 persons., 2 persons. together, 1 persons.
Rows 111-112: all persons.
Row 113: K1, K2. together, 8 persons., 2 persons. together, 1 person., close the loops.

Knit the sides of the sole
Check the chart on the right to see how many sts from the edge of the sole to pick up. Knit with white yarn. Knit 7 rows. Knit out. all toe loops and faces. rest. Start by moving all the sts of the toe (16+10+16) on one needle to get a neater look.
Close the loops without tightening with black thread.
You can use a hook to pick up the loops at the toe and heel.


In the photo, the toe loops are on three knitting needles, but for a more accurate result, it is better to transfer the loops to one knitting needle.

Close the loops with black thread.

Crochet or embroider with black thread a strip on the sides of the slipper and around the heel.

We knit the white tip of the slipper, persons. satin stitch.
Turn the sole out. side towards you and lift 4 sts in the center of the toe, behind the white jumpers. You will see them on the back of the black rim.


4 out., then skip one (from the rim), pick up a new item from the rim and knit it out., turn the work.
Now remove the first st, k4, skip the st from the rim and pick up a new st, as you did before, knit her faces. and turn the job. Remove the 1st p.p., etc. until you have 2 out. n. on each side of the rim. Close loops. Don't cut the thread...

To finish, tie the tip of the slipper around with a crochet ss, as shown in the photo.


Knit decorative icon.
Crochet 4 ch and connect in a circle ss.
1st row: 2 ch rises and 14 dc in a circle, sl-st in the 2nd ch rise.
2nd row: 1 ch lift, * 2 sc in the next. p., 1 sc in the next. *, repeat from * to * to the end of the row, sl-st in ch of lifting.
Cut the thread.
Using black thread and a needle, embroider a star as shown in the photo.


Stuff the sock, for example, with plastic bags, put slippers on top and attach it to the sock with pins. Then sew along the black decorative stripes with black thread and small stitches. Also sew on the toe trim with white thread.

Knitted sneakers-slippers are ready!

Knitted sneakers in style famous brand will look very bright on the child's leg. Even adults will envy such shoes kindly. Booties can be made from thin yarn or a denser, thicker thread, thanks to which the sneakers will warm the baby's legs in the autumn-winter period. The footwear is designed for a child aged 6 months to 1 year.

Required to work

• blue and white yarn;
• knitting needles;
• hook;
• needle.

Step-by-step instruction

1. We collect 40 loops on two knitting needles with white yarn. We form the first line only with facial loops, the second - with purl. In the third row, we make an addition through a broach: one at the beginning, at the end and 2 in the middle, we form all the remaining loops with facial ones (36 pcs.).

   We collect a series of loops

   Making multiple rows

2. The fourth row consists entirely of purl loops. 5 line we create in the likeness of 3 rows. We make two additional loops in the middle with an interval of 4 facial ones. Row 6 is purl.
3. We do the seventh row according to the scheme: addition -18 persons. - addition - 6 persons. - addition - 18 persons. - addition. 8th row is similar to 6th line.
4. The ninth row also has additions at the beginning, after 18 facial, after 8 facial and at the end. From the 10th to the 16th row, inclusive, we knit with facial loops.
5. We take blue yarn. We attach the thread at the beginning of the workpiece and after 36 loops, a white thread is fixed between these gaps.

   Switching to blue yarn

6. In the 17th row we knit 18 persons. blue loops, 18 white loops, then again 18 blue facial loops.
7. 18 row we start with 18 persons. loops, then there are 18 purl loops with white yarn, we complete the line with 18 front ones.
8. We knit the 19th row according to the scheme only with the front ones: 18 blue + 18 white + 18 blue.
9. In the 20th row, we knit the purl loops with white, the front loops with blue.

   The front loops are knitted in blue

10. 21 lines are formed completely front (according to the previous color). Next row starts with knit 18, purl 18, and knit 18.
11. 23 row has a decrease. After 18 blue facial, it is necessary to knit the white segment with facial 2 together (5 times), we complete the row with 18 facial blue yarn. We knit 24 rows, except for 9 white purl loops.
12. In the 25th row we form 18 blue front ones, decreasing by 2 together front (5 repetitions), capturing 1 blue loop, then we knit 17 blue loops. 26 line - 17 facial blue, 5 purl white + 18 blue facial.
13. 27 row consists of 16 facial loops. With the third knitting needle we knit 8 facial ones, we create the ninth loop from the broach (this will be the tongue of the sneaker). Work 15 extra blue rows in garter stitch.

    

We knit booties sneakers with knitting needles for kids according to photo and video MK

We knit booties sneakers with knitting needles for kids according to photo and video MK

If you are just starting to learn how to knit and want to make fashionable booties for your baby, you can use this lesson. The master class shows the technique of making shoes for newborns, with photos, descriptions and videos. The lesson also provides a scheme of work in order to successfully tie the baby's booties. Such small sneakers are in great demand among young mothers, so many of them will want to learn how to knit booties of this model using knitting needles. The model of booties, made in the form of a sneaker, is knitted with needles quite quickly, and the colors are chosen as you wish. It is better to knit two-tone sneakers, because they are more reminiscent of real sneakers. In addition, consider the rules for combining clothes and similar shoes. Knitted small and very effective booties sneakers look best in combination with straight trousers, or a classic suit, as well as a children's shirt. So, we begin the lesson on knitting baby booties, reminiscent of sneakers.

This master class has photos attached to it, from which we can conclude that baby booties, sneakers with knitting needles, both warm the baby's legs and decorate a set of his clothes.

The appearance of baby booties with knitting needles is stylish and spectacular. Any mom can easily knit children's sneakers by choosing a combination of color, size and design details. It is enough to measure the length of the child's legs, and you can start knitting. In the photo above, a combination of white with blue color, but there are other options. Choose white and green, or white and orange. As described, small sneakers are knitted using patterns that are fairly uniform, with no embossing. Pay attention to the variety of colors that can be combined for such booties.

And now let's look at the previously mentioned color combinations, such as orange and white.

And here is another combination that was discussed in the lesson, that is, a combination of green with blue, and a blue border.

Video lesson of knitting booties sneakers from black and white yarn

The video master class will tell novice needlewomen how to knit baby booties in the form of sneakers. You will need white and black threads and number two knitting needles. Let's make a set on knitting needles with white threads, in the amount of forty-six units. The first two rows must be connected only with facial loops. In this case, the first hem must be removed, and the last knit as a purl. In the third P, yarn over (H) is performed. This is followed by 21 front loops (LP), another yarn over, two LPs, yarn over, and again 21 LPs. The last H is performed in front of the edge P. The fourth row (P) is performed with facial loops. In place of the yarns, it is necessary to perform crossed LPs so that there are no holes on the canvas. In the next fifth R, yarn overs are performed in the same way as in the third. While knitting, carefully watch the video. The sixth row is knitted as the fourth row. In the seventh R, we also alternate LP and yarn. With this technique, you need to knit twelve rows with knitting needles. This is the knitting pattern of the sole, which is the basis for shoes called booties.

Having finished the sole, we proceed to knitting the side with knitting needles. For him, we will make six R facial loops, after which we will attach a black thread to the work, and we will knit two rows. Behind the black bar should be put back into operation white thread, and perform two more R. Now we begin to knit the rounding of the toe of the booties of the sneaker. First, we will perform thirty units, after which we begin to knit six Ps separately, gradually increasing their number by one in each row, and bringing it up to twelve. Next, we make seven more Ps, but now with reductions. After that, in the same place, we begin to knit thirteen rows with black threads, performing the tongue of the booties of the sneaker. In the thirteenth row, it is necessary to decrease the loops at its beginning and end, one at a time. As a result of this, a rounding of the tongue is obtained, after which we knit another row, and close the loops of the tongue. The remaining Ps are distributed on three knitting needles, and we knit twenty-four rows of the back of the booties with black yarn. In the twenty-fifth P, we will decrease at the edges along the loop, and in the twenty-sixth we will close the loops. At the final stage, it remains to crochet the area of ​​\u200b\u200bthe tongue and the back, using single crochet or double crochet. Then we sew the two halves of the sole. To make the laces you need a hook.

We knit booties sneakers for a newborn

The master class will serve as a fixing material for knitting shoe booties. The model is knitted with two knitting needles. Technique on step by step photos will help beginner knitters to easily cope with needlework, and knit booties in the form of sneakers. For knitting, a mixed yarn of wool and acrylic, cotton and acrylic, or plain wool is suitable. We will prepare knitting needles number three, and we will knit sneakers booties with facial loops, purl loops and crochets. Note also that the size of the foot of a newborn is eight centimeters under the age of three months. From three to six months, the length of the leg is nine centimeters. For a six-month-old baby, knit booties 11 centimeters long. One year old baby you will need sneakers about thirteen cm long. For example, we take the length of booties 11 centimeters, and we collect thirty-two loops for it with white threads.

Then we will make twelve rows. From the front of the canvas we knit facial loops. Here it is necessary to perform additions in each row. We will add P at the beginning and end of R, as well as near the two central loops, before and after them, two units each. It is advisable to mark the center of the canvas with a thread of a different shade. On the wrong side of the fabric we knit in this way. We will knit P facial, with the exception of the two central and two extreme units. We will tie these Ps with purl. As a result, we will get such a shape of the canvas.

Let us dwell in more detail on what course of work will be performed in the process of needlework in the first four rows:

• in the first R, all P are facial, except for the hem ones, of which the first is removed, and the last is knitted as an IP;
• in the second P we remove the hem, then we knit the PI, after which the loops are only facial. We knit to the center with facial, then two central P with purl. They should be followed by LP, excluding the last two, which we knit as PI;
• after the hem in the third R, a front crossed P is knitted from a broach (single crochet). Then P should be facial, and before and after the middle P we will perform one added P. At the end of R, add another facial crossed P from the broach. This added P is performed before the last edge;
• the fourth R is knitted in the same way as the second.

As can be seen from the description, added Ps exist only in odd Ps, with the help of Ps from the broach. Even R knit without additions. We knit the next two P in blue, with a pattern facial surface. After that, we will continue the work in the same pattern. In this case, on the odd P side, the following actions must be performed. Without reaching three P to the center, make two P along with the movement. This means that the second P is placed before work on an additional knitting needle or pin. Then two LPs are knitted, and two Ps together with the front.

In even P, from the PI side, three loops to the center, we will make two PIs along with the movement. After that, two PIs follow, and two purl together.
This technique should be followed until only half of the units from the initial amount remain in the work. To thread the laces, we need to complete the next row. We knit a report, where two LPs alternate with a crochet together. After that, we will begin to make a cuff for the sneaker using white threads. Let's perform an elastic band, where LP alternate with PI.

The height of the gum is approximately equal to ten centimeters, after which we close the row. We cut the yarn, except for the length that is needed for the seam.
We sew the product, after which we crochet the cord, forty centimeters long. We put it in the holes of the sneaker, and tie it.

Video: Booties sneakers for girls