Lacing sneakers so as not to tie. Fashionable types and techniques of lacing sneakers
From early childhood, we are faced with the question " How to tie shoelaces?"and I think that not everyone could even imagine that there is such great amount ways not only to tie shoelaces, but also to make a knot on shoelaces. It turns out that there is such a person, the Australian Ian Fieggen, who is simply an ace in tying the most intricate weaves and is still inventing more and more new methods, thereby replenishing his and our “arsenal”. We will consider the most popular ways to tie shoelaces that can be used for any shoe.
1. Classic (cross) lacing. The most common way of lacing is when the laces pass through the lower eyelets to the top and simply cross over to the very end. This is the lightest lacing, in which the leg is not rubbed, but the shoes are wrinkled.
2. A variation of traditional lacing. It is necessary to alternately start the laces, first from top to bottom, and then from bottom to top of the eyes, while crossing the laces. This will result in a more interesting lacing, in which the shoes will be easier to tighten or loosen, and the laces will wear out less (photo 2.1). If there are an odd number of pairs of holes on the sneakers, then you need to lace up from the bottom up so that the last lace is also on the inside (photo 2.2).
3. European straight lacing- the shoes “sit” quite tightly on the leg and in case of a foot injury, the laces are quite easy to cut in order to quickly remove the shoes. Therefore, such lacing is recommended for athletes and the military. In addition, straight lacing looks beautiful on model shoes.
Lacing:
- The lace passes through the bottom holes and exits at both ends.
- The first end of the lace (yellow) crosses out through the top eyelet.
- The other end of the lace (blue) crosses out above through one eyelet.
- Continue lacing in turn, first with one and then with the other lace.
4. Fashionable (straight) lacing- looks very neat, but it can only be done on shoes with an even number of pairs of eyelets.
Although many try to make it with an odd number of holes. This method is a little difficult to perform, but, nevertheless, is quite popular.
Technique:
- the lace passes through the lower holes inside the boot from both ends;
- one end is passed into the upper eye on the right and after that it is pulled straight into the left;
- the two ends go up and out through the same hole, then pass through to the other side and go higher;
- the process continues until one of the laces reaches the top;
- the other end of the lace is passed through the remaining eyelet at the top.
5. Lacing "Ladder" looks spectacular on high shoes with contrasting laces, can be used to shorten the laces, while the shoes are tightly tightened.
Lacing technique:
- The lace passes through the bottom holes and exits at each end.
- Next, the ends of the lace are passed up into the following holes.
- The laces are crossed and threaded under the vertical lacing of the opposite side and then lifted into the next upper eyelet.
- At the end, the laces cross again, pass under the vertical lacing and diverge in both directions.
6. Hidden knot lacing- a kind of fashionable (straight) lacing, in which the yellow end of the lace is left longer, and a simple knot is tied at the end and the laces are hidden.
7. Double helix lacing used for fast lacing, which is carried out in a spiral inside and out. This makes it easy to tighten and loosen the lacing. For symmetry, shoes can be laced in a mirror.
8. Double lacingcross can be made with gaps (short laces) and without gaps (long laces). Looks very original on low shoes or sneakers.
9. Lattice (cobweb) one of the most popular laces. The laces intersect at an acute angle, which allows them to intertwine with each other. Looks spectacular with wide laces and sneakers with 6 pairs of eyelets. There are several options for such lacing, depending on the length of the laces.
You can try to make a similar lacing of two multi-colored laces. The laces should not be very thick, otherwise they simply will not fit into the holes. Such lacing is difficult to tighten and tie, but I think it's worth it. Looks very cool.
10. Lace-up zipper. This decorative lacing is perfect for skates, skates or any other shoe that needs firm support and is difficult to tighten.
11. Lacing with one hand- for people with disabilities, you can use this lacing. The left and right sneakers can be tied in a mirror for symmetry. In order to tighten the shoes, you need to start from the top, and vice versa (from the bottom up) to loosen the lacing. The knot must be made at the upper right end. For reliability, use wider, stronger laces.
12. For fashionistas who want more fun lacing, we can advise bicolorlacing. At the same time, you can choose colors to match the clothes or shoes, and get creative with tying the four ends of the lacing.
13. Checkered lacing- looks amazing on loose sneakers. In order to perform it, you must first make a straight (fashionable) lacing (photo 4 option 2) with a lace of one color (orange in the diagram), and then simply weave around the orange lace with a different color, starting from the bottom until it ends. Just tie the ends of the laces inside. Use wide laces.
14. Back loop lacing also looks interesting with multi-colored laces, thereby emphasizing their weave.
Finally, it remains only to tie a knot and you can go for a walk.
We hope you enjoy lacing as much as we do. We have chosen for you the most interesting and functional ways of lacing, you just have to choose the way you like. Experiment and make your shoes original.
Laces are more often perceived as an insignificant nuance in our image - and in vain! With a competent approach, they turn into the main focus of the bow, because style is all about small details and thoughtfulness. So let’s get out of the habit of factory lacing and the usual “bow” on top since childhood and figure out how to tie shoelaces on sneakers so as not to miss a single little thing in your image!
Method with non-functional loops
With this method, a series of non-functional loops is obtained along the holes. It looks very aesthetically pleasing, but it is incredibly easy to do!
Algorithm for how to tie shoelaces on sneakers:
- We start lacing from the bottom, bring the laces out.
- We thread them into the upper second holes (without crossing).
- We cross and thread the ends under the lace between 1 and 2 holes on each side.
- We do the operation to the very top and enjoy.
Important: this option looks good on light summer shoes, better - monophonic, without unnecessary decor elements (minimalism is especially appropriate).
Watch how to tie shoelaces on sneakers in the video:
Loop back method
This method looks interesting on any sneakers. It will fit even if you decide to wear it with casual clothes.
Sequencing:
- Start lacing from the bottom; from inside out.
- Cross both ends of the cord between each other in the middle and thread from the second holes from the inside out.
- Repeat the operation to the very top. Ready!
It is better to use the scheme with round laces, as flat ones will violate the accuracy of the pattern and wrinkle.
How to lace up sneakers with a gossamer
It looks like the canonical crosswise pattern, the difference is that the ends of the laces are not threaded into the nearest holes, but into the 1st and 4th. The basic principle: each "cross" is located in a conditional square, which is formed by 4 holes.
Now in detail how to beautifully tie shoelaces on sneakers:
- We start lacing from below; from inside out.
- We cross the lacing and fill it in the 4th hole.
- Immediately we thread the lace into the 2nd holes from the inside.
- We cross, we stretch into the 5th holes.
- We return, continuing the lacing from the inside and bringing it out of the 3 holes.
- We cross, we pass through the 6th holes - voila, everything is ready!
How to lace up sneakers in a straight way
Suitable for any sneakers, sneakers, even light summer shoes- universal way! For example, cross-country shoes allow everyone, but initially even they come with criss-cross lacing, while the usual "ladder" will be more than appropriate here!
The bottom line is that after tying, a neat parallel of the lacing is visible, everything else is hidden behind the lapels. Watch the video on how to do it:
If you are going, then it is also better for them to use this scheme or the classic cross one: original design itself attracts attention, and complex lacing will only complicate appearance shoes.
What are your favorite ways to lace up your shoes? Share in the comments!
It is probably difficult to find a person who has not laced up his shoes at least once in his life.
It turns out that the methods of tying, according to mathematical calculations, are enough to satisfy a variety of needs and desires. Based on six pairs of holes per shoe, there are almost two trillion ways. It's a number with twelve zeros!
If we proceed from the fact that laced shoes should be used, and not sorted out by "marine" knots when trying to quickly tighten, then there are almost 43,000 options!
How to tie shoelaces
Consider the most popular ways to lace up shoes.
- Traditional, or cross. This is the "classic" way, which is usually taught in childhood. It is uncomplicated, comfortable and lightweight. With it, you can quickly tighten sneakers, sneakers, shoes. Suitable for monophonic soft laces. The cord is wound from the top side through the bottom holes. The ends of the cord are passed diagonally through the following holes. Both ends from bottom to top. Then top to bottom. The knot is tied after passing through the last holes.
Lattice. It looks beautiful, resembles a field for playing tic-tac-toe. One of the most popular ways. But only for those who are not in a hurry. Tightening this tie is a laborious task. The laces are intertwined at an acute angle, creating a weaving feeling. To facilitate work, it is usually laced at one end, and the second one finishes the job. Lacing lattice is suitable for shoes with at least six holes.- Economical lattice (lattice). The method looks similar to lacing with a lattice. Differs in the internal plant of cords under openings. More economical way as shorter cords can be used.
- Cross stitch. A simple lacing option that extends the life of the laces. So beautiful, so simple. There is one subtlety when lacing: if the number of holes on the shoe is even, then the lacing should start from the top, and if it is odd, then from the bottom. The figure shows an example with an even number of holes.
- Straight lacing. The lacing is very neat, but it is difficult to get the ponytails on top to be the same length. Laced at one end. Shoes must have an even number of pairs of holes.
- For cycling or running through the woods. Practical lacing with a knot on the side. Appearance for an amateur, but the practical benefits for an athlete are great. The side knot does not interfere, does not cling and will not get stuck anywhere.
- Store lacing. It is laced with one end, which is immediately passed diagonally from top to bottom. It is difficult to achieve the same length of the remnants of the laces on top.
- World Wide Web. Very original lacing, which is suitable for high shoes, boots. It looks decorative and elegant if the cords are of different colors. It is easy to get confused at the first tie. It is necessary to carefully and accurately follow the scheme. It is most correct to start lacing from the horizontal section below, near the last holes.
- Double reverse web. The clothed way of the World Wide Web. For this option, shorter ropes are used.
- Butterfly. Looks like a bow tie, only on shoes. A butterfly, that is, a cross, can be made where a tight screed is required. In areas where you can relax the lacing, passes are made. The straight stitch can be done from above or below. From above, it is carried out if the shoe has an odd number of pairs of holes. This option is shown in the diagram.
Military. Looks simple. It is very practical in application. The laces can be short. This method of lacing is used by soldiers of some foreign armies. In particular, British and French.- Railway. Reminiscent of military lacing, but only externally. This is a very strong lacing method that takes a long time to tighten. The cords are thin because they go through the same hole twice.
- Double helix. Fast and pretty lacing with minimal friction. Therefore, it retains a presentable appearance and lasts longer than in clever ways. You can lace up mirrored on the left and right sneakers.
- Zip zipper. Lacing got its name because of the similarity with a zipper. Ideal for skating or rollerblading athletes. It is very difficult to pull it tight. But this is one of the most durable and strong types of lacing.
- For one hand. The method is suitable for thick laces. Can be tied with one hand. A bow is not required. A knot is tied at the top. The lacing is easy to tighten at the top, usually more relaxed at the bottom.
- Tie with a straight knot. For those who like to play it safe, as you can separately adjust the density of the lacing of the upper and lower parts. It is difficult to put on the boots, because, due to the knot in the middle, in people with a high instep, the foot can cling to it.
- Hidden node. A way to hide the knot inside the shoes. For lovers of minimalism.
- Two color stripe. The lacing looks very nice on sneakers. The only drawback is the presence of an internal node. Suitable for thin laces.
- Double two-color cell. Resolves an internal host issue. It just doesn't exist. beautiful way tying shoelaces. If the sneakers have an odd number of pairs of holes, then you need to shorten one lace so that they are of different lengths.
- Reverse loop. Looks elegant on sneakers, but the laces wear out quickly. This type of lacing requires constant attention. Loops-knots with prolonged use move out in different directions.
- Nodal. Very tight and strong lacing. Great for exercise. Ski boots, roller skates will not move out and hang out. Each knot increases the strength of the laces.
- Twisted way. Also tight lacing that holds the boots well. It looks especially impressive if the boots and laces, respectively, are black and white flowers. Suitable for thick laces.
- Roman numerals. Lots of choice between lacing options, especially if a large number of holes in shoes.
Footbag lacing. The shape of the shoe, at first glance, becomes incorrect. But it is very convenient to control the game ball, which confidently falls into the recess.- The second way to play footbag. This lacing is similar to the previous one. Various variations are possible, which are best selected individually for sneakers or sneakers.
- Chess. If the shoes have a wide field, then the checkerboard method is perfect. The laces should be flat and tighter is better. Two laces are used. You can choose solid color, you can use different colors. The method is quite laborious, but beautiful. You need to be prepared that it will often have to be bandaged. Every time you take off your shoes, it wrinkles and the squares slide off. The first lace is threaded in the usual straight way. The second is laced up vertically. It must be staggered between the rows of the first lace, threading it from above, then from below.
Boots with loops
On boots that have loops instead of the usual holes, it is best to use round laces. In this case, they will last much longer. The loops themselves have a load limit, so it is necessary to select such a pattern for tying the laces to ensure a uniform load. Cross stitching is best.
In this case, it is necessary to tie the laces correctly from the bottom up, initially distributing the length so that the left and right parts are the same.
Choosing a shoe lacing pattern should be done as if choosing an outfit. Reliable and fast lacing is suitable for sports shoes, for festive - elegant style, for casual shoes, simple, comfortable lacing is best.
Baby secrets
For a child's foot, comfort and proper wearing of simple shoes is most important.
Choosing shoes and laces for her, there are a few things to keep in mind:
How to prevent untie
It often happens that the laces are untied at the most inopportune moment. Sometimes there is no time or opportunity to tie them.
In addition to the traditional bow, there are several reliable nodes, which can be used when tying shoelaces - then the knot will be strong and will not let you down at the most inopportune moment.
The easiest and one of the most reliable. Easy to tie, quickly untied with your hands, even if the laces are wet, but does not unravel on its own.
To tie it, you first need to make a regular knot. And then another. The main thing is that when tying the second knot, you get not a twisted knot, but a flat one.
Surgical method
It can be called an improved version of the direct knot. It was originally designed for medical use. This node is able to withstand heavy loads. He cannot untie himself, but he easily gives in to his hands.
Of course, there are many different nodes, but these have proven to be the most reliable and versatile.
classic bow
An ordinary bow, which everyone knows how to tie since childhood, can be strengthened and tied so that it practically does not relax on its own. The figure shows a diagram of such a node.
In general, all methods of lacing can be conditionally divided into three global groups:
- Sports lacing. Ideal for sneakers, sneakers.
- Straight. Looks good on men's shoes, serious shoes.
- Cross. The most versatile type of tying.
Shoes are an integral part of the image. Therefore, when choosing an outfit, you need to take care that beautifully tie shoelaces on boots, shoes, sneakers. Then everything will be harmonious and convenient, and on this, you see, depends good mood and health.
Attention, only TODAY!
on my sneakers there are only 5 holes, and on the Internet on all sites from 6 holes and moreAnna))
Alla
Victoria Through the knee.
Kirill goof, people have problems...))
Ekaterina with a mesh from the nose: through one
*/* /*/*/
* ** * * and then in the other direction
Tags: How, you can, tie, laces, on, sneakers, with, 5, holes
VK group - Ideas for new...
This article will help you figure out how to tie your shoelaces beautifully! ... often encountered and fully reflects how beautifully you can tie your shoelaces! ... cool laces, but only designed for 5 holes on one side, ...
36 original ways to lace shoes
Today, shoes such as sneakers and sneakers have ceased to be considered only sports, moving into the category of everyday. Lacing can give originality to your shoes.
You don't have to use traditional laces. As original decoration wide silk ribbons, twisted threads, strong braid of any kind are suitable. You can also use thin strips of durable fabric in two colors - with their help you will be able to recreate the so-called checkerboard lacing, which looks very beautiful. If the lacing of the sneaker is combined with any item of your outfit, such as a T-shirt or a bag, it will help you look very stylish. Do not be afraid to experiment - after all, such a seemingly inconspicuous detail as lacing can add zest to your image.
I want to bring to your attention 36 original ways shoe lacing (boots, sneakers, sneakers).
1 Traditional cross lacing method
The lace is passed through the bottom holes and is brought out from both ends. The ends are crossed and then passed from the inside out through the holes. Reach the top holes and tie the laces. This method is easy and convenient.
2 Lacing with crosses above and below
If there is an odd number of pairs of holes on the boot, start lacing from the inside (as in the photo of the boot), and if there is an even number, then from above (as in the diagram). This is a very pretty and easy way to reduce wear on your laces as well!
3 Simple straight lacing
One end of the lace stretches immediately to the very top, and the other goes through all the holes. Suitable for boots with an even number of pairs of holes. It is quite difficult to align the tails of the laces to tie them, but the lacing looks very neat.
4 Lacing for woodland or cycling
It doesn’t look very good, but the lace knot, due to its location on the side (inside for the forest or outside for cycling), does not cling to or untie anything.
5 Store lacing
One end of the lace is immediately passed into the upper opposite hole, and the other end gradually laces the entire boot, making it look like a spiral. This method can be modified by skipping one end not obliquely, but hiding it as in a simple straight lacing (3rd way to lace up boots from this article).
6 Lacing World Wide Web
Very decorative lacing, especially for high boots or boots using laces in a contrasting color. Carefully follow the diagram so as not to get confused (start with the gray section-middle of the lace, then one end is shown in blue, the other in yellow).
7 Double reverse lacing
A more economical modification of the lacing method. For him, the laces are a little shorter.
8 Bow tie
Named for its resemblance to a bow tie. If there is an odd number of pairs of holes on the boot, then first make a straight stitch along the top (as in the diagram), if there is an even number - at the bottom (as in the photo of the boot). Butterfly crosses can be done on those parts of the boot that need to be pulled off, and skips where the foot can be given a little freedom. You can use relatively short laces!
9 Military lacing
This is a reverse version of bow tie. Named military because soldiers of the British, Dutch, French and Brazilian armies lace up their boots this way. And what, it looks good, and the laces do not need long ...
10 Lacing Rail
It is very similar to the previous method, only on the inside the laces do not go diagonally, but straight. This method of lacing is only suitable for thin or flat laces because the laces go through the holes twice. That is why the lacing is very strong, but it is difficult to tighten it.
11 Double helix lacing
Beautiful and fast lacing that reduces friction and prolongs the life of your laces. The left and right boot can be laced up in a mirror image for symmetry.
12 Lacing Lattice
Such lacing is difficult to tighten, but, nevertheless, it is very popular for its decorative effect. To simplify the work, first weave the entire lacing with one end, and then pass the other end of the lace through the lattice. Such a lattice can only be woven on boots with 6 pairs of holes.
13 Lattice lacing
In fact, the same lacing as the previous one, but laces and a little shorter will fit for it. Economic option.
14 Zip closure
This lacing is very difficult to tighten, but it is very strong, which is ideal for lacing skates and roller skates. At the same time, it looks like a huge fastener - a zipper.
15 Lacing with one hand
You don't even have to tie a bow, just a knot at one end of the string is enough. The lacing is tighter at the top and looser at the bottom. Best used with small holes and thick laces.
16 Knotted lacing
You can make the top and bottom halves looser or tighter as you wish. With such lacing, however, it is difficult to put the foot into the boot, as the knot in the middle will interfere.
17 Hidden Knot
Straight lacing stitches look even more original if the bow is not visible. This method will allow you to hide your bow!
18 Two-tone lacing
Very, very beautiful and original lacing. Ideally, you need to cut two long laces into slightly unequal parts so that the ends are the same length as a result.
19 Double two-tone lacing
Very creative way lacing. The 4 ends of the laces can also be creatively tied. If you have boots with an odd number of holes, then you will need laces of different lengths.
20 Back loop lacing
A beautiful lacing option, which, however, has its drawbacks. First, criss-cross loops tend to move out from the middle. Secondly, friction increases wear on the laces. It will look great if you make it two-tone.
21 Lacing with knots
An additional knot at each step of the lacing increases its strength and improves its appearance. The method is ideal for lacing ski boots, roller skates, etc. Loosening the lacing is very problematic.
22 Twisted lacing
Beautiful strong lacing, which is also difficult to loosen. Especially decorative weaves look with thick round white laces on boots in a contrasting dark color.
23 Roman numerals
It looks especially beautiful on boots without a gap between the halves. You can vary the number and location of XX and II depending on the number of holes on your boots.
24 Footbag lacing
For playing footbag, it is convenient to create a semblance of a bowl from your shoes, so that it is easier to control the ball being thrown and caught. Of course, the boots lose their shape, but for the sake of the interests of the game, you can suffer! This is one of at least four lacing options, three more will be presented below.
25 Footbag lacing method
All four lacing methods combine long stitches along the edges, pulling the boot halves outward. The top of the lacing can be done in another way, not as in the diagram and photograph.
26 Lacing option for footbag (socks)
Sneaker lacing is an important piece of equipment. Incorrectly laced sneakers can cause blisters, black nails, and other problems. These ailments are experienced by many runners, especially marathon runners. We have collected the most proven ways to lace up sneakers and tie shoelaces. Read, choose the option for your foot and make your sneakers more comfortable.
How to lace up your sneakers?
The lacing should hold the foot tightly so that there is no unnecessary movement of the foot. At the same time, do not put pressure on the ascent and do not interfere with blood flow.
How do you know if your sneakers are laced correctly?
- heel fixed
- the foot sits tightly, does not go left and right
- on the ascent, the blood flow is not transmitted
Sneaker lacing options
Top - 6 ways of lacing that will make sneakers more comfortable.
Lacing into the last holes of the sneaker
The last holes in the sneakers are designed for a tighter fit of the foot. You can skip them on walking shoes, but for running we recommend that you always lace up using these holes. Using this method, the problem of a “walking” heel is solved.
Pay attention to the final part. After the usual knot, another knot is made from bows. This is the easiest way to avoid untying your laces while running, but not the most effective. At the end of the article, we have selected 4 the best way tie shoelaces.
Lacing method for wide forefoot
Suitable for those with wide toes. Makes the shoe a little fat in the front and securely locks the midfoot.
Lacing for wide feet
Makes the shoe looser throughout the instep. Suitable for those with wide feet. Can be comfortable with orthopedic insoles for flat feet.
Lacing option for narrow feet
For owners of narrow feet, special models of sneakers are produced, but they can not always be found. Try this type of lacing if the shoes are the right length, but the foot is walking.
High rise lacing
Suitable for hypopronators and high arched feet.
Lacing for finger freedom
The toes should move freely in the shoes. If this does not happen - this lacing is for you. Also suitable for owners of a long middle toe.
How to tie shoelaces on sneakers?
Getting it right is half the battle. Now you need to securely tie. We have selected 4 reliable ways to tie shoelaces.
Strong version of the regular knot
Video from ted.com with Russian translation.
An easy, fast and reliable way to tie your shoelaces
Modified bow. It ties quickly and doesn't untie on the go.
double bow knot
This method is suitable for those who make 2 loops and tie them in a knot. More durable option.
Surgical knot for sneakers
Surgical knot - the usual way of tying shoelaces, but with an additional loop. Much more reliable.
Go in for sports, move, travel and be healthy!
If you find an error, a typo, or you have something to discuss, write in the comments. We are always happy to communicate. 🙂
