home » Etiquette » Cover for fly from rubber bands. How to weave a phone case from rubber bands: patterns, materials and equipment for weaving

Cover for fly from rubber bands. How to weave a phone case from rubber bands: patterns, materials and equipment for weaving

A cover made of rubber bands for a phone is a product that every little girl dreams of. After all, you must admit that this beautiful, interesting, and most importantly, completely unique accessory will not go unnoticed among people. Before you start creating this cute accessory, you should learn some of the intricacies of weaving.

Subtleties of work

The cover is a great thing. But how to weave a rubber band phone case in such a way that it would fit a little princess? In fact, there is almost nothing complicated and unusual in this - any child can cope with this goal on his own, unless, of course, he is quite small.

Learning how to make phone cases is not at all difficult, the most important thing here is to have the desire and skills. Pair useful advice- and a delightful unusual accessory in your pocket.

Main inventory

Remember that for such an important matter as weaving, first of all, you need to stock up on great patience. After all, this will take a lot of time - the result of labor will not appear immediately. After all, weaving a product from rubber bands is a rather painstaking task. What is required for work:

Cover weaving methods

Rubber weaving, phone case. There are quite different methods weaving rubber bands from Rainbow Looms - it all depends on the type of craft and the skills (well, age) of the manufacturer. But if you want to make a case, then there are only two simple and interesting weaving method:

Work on the machine

Many people think about how to weave a phone case out of rubber bands on a loom. With a set of materials, a machine and a little effort, you can create a unique thing. It is not at all difficult to do such a thing on the machine. On the columns of the machine (upper and lower row) is put on each under one eight.

The main goal is to ensure that crosses come out at the output, occupying the entire perimeter of the tool.

Stages of work:

The first lower column and the second upper one will be braided by the first iris. The next one will hook on the second lower peg and throw itself on the first upper one. Then everything is simple - not twisted rubber bands are put on suitable pairs of pegs in the bottom row.

We do the same for the top row. With the help of a hook, the lower rubber bands are pulled together to the center. Then all manipulations are repeated in accordance with the selected length of the product. Remember about technical holes - they are made only with the help of passes.

To complete the work, all loops are removed on the first row - and then on the iris, which is then tightened. This is a completely general scheme, if you want it you can always improve it with some of your personal preferences - for example, apply different variants the colors of rubber bands, weave patterns and ornaments, you can even create letters - in a word, use everything that your imagination allows you to do, without restrictions.

Crochet phone case

Of course, at first, it may seem that making a phone or tablet case from rubber bands with a hook is much more difficult and time consuming. In fact, this is not at all the case - both methods have their pros and cons.

To work with a crochet, you need to acquire exactly the tool itself - a crochet hook. Then everything is simple - weaving passes by the "chain" method.

Keep in mind, however, that a chain link is about 1cm long, so it's pretty easy to figure out exactly how long the item is and how many elastic bands you need. First you need to take the first elastic band, fold it into a figure eight and put it on the hook - this is how the first loop will turn out.

Next, you need to take the next part and thread it through a double loop - you get four loops already. The last two loops are always pulled through the new irises and back onto the hook. Thus, we will get the whole cover - beautiful and interesting. If you make such a product a couple of times, then everything will start to turn out automatically.

Attention, only TODAY!

A rubber phone case is a thing that every little fashionista dreams of. After all, you see, this bright, memorable, and most importantly, completely individual accessory will not go unnoticed in the crowd.

The subtleties that you need to know in order to weave a phone case from rubber bands

The cover is a wonderful thing. But how to make a phone case out of elastic bands so that it would be worthy of a little princess? In fact, there is absolutely nothing incredible and difficult about this - any girl can handle this matter on her own, unless, of course, she is very small. Learning to weave a phone case from rubber bands is not at all difficult, the main thing here is to have the desire and skill. With desire, most likely, complete order, but with the ability problems may arise. But this is also fixable: a few useful tips- and a chic, exclusive accessory in your pocket.

Inventory for weaving a cover

Keep in mind that for such a serious business as weaving, first of all, you need to stock up on a lot of patience. After all, this will take some time - the result will not appear instantly. After all, weaving a phone case from rubber bands is a rather laborious task. First of all, to create it, you need to decide on the pattern and method of weaving. Then get those same rainbow rubber bands - the basis of our cover. There should be a lot of them - at least a thousand pieces. In addition to irises, you will need the weaving pattern itself, drawn on a piece of paper (it will be easier to cross out what has already been done with it), and, of course, the device itself for creating a masterpiece. You can’t weave such a thing on your fingers, so you will need to take care of having a special machine or hook. Of course, you can try to weave rubber bands on a slingshot, but it will be just a waste of time.

How to weave a phone case from rubber bands

There are quite a variety of ways to weave products from Rainbow Looms - it all depends on the complexity of the product and the skill (respectively, and age) of the performer. But if we talk about a phone case made of rubber bands, then there are only two affordable and convenient ways of weaving.

On the machine. This method, of course, gives a wider range for the flight of fancy, since it allows you to vary both the available pattern and shape in a much more interesting way. The mass of schemes that can be implemented, and great amount patterns will delight you.
crochet. Here, of course, there will be a little less options, but with sufficient skill, you can create an amazingly beautiful phone case from rubber bands.

We make a product on the machine

With a set of rubber bands, a machine and a little patience, you can make an exclusive thing. Making a phone case from rubber bands on a machine is not difficult. On the columns of the machine (upper and lower row) it is put on each under one rubber band with a figure eight. The main task is to ensure that the output is a kind of letter X, which occupies the entire perimeter of the machine. The amplitude of weaving is as follows - the first lower column and the second upper one are braided by the first iris. The next one clings to the second lower peg and is hung on the first upper one. Then everything is simple - not twisted elastic bands are put on the corresponding pairs of pegs in the bottom row.

We repeat the same for the top row. With the help of a hook, the lower elastic bands are pulled together to the middle. Then all actions are duplicated in accordance with the required length of the cover. Do not forget about the technical holes - they are made simply with the help of passes. To complete the weaving, all loops are removed on the first row - and then on the iris, which is then tightened.

This is a completely general scheme, if you wish, you can always dilute it with some of your personal know-how - for example, use different variations of the color of elastic bands, weave patterns and ornaments, you can even weave letters - in a word, use everything that your imagination allows you.

Crochet rubber band phone case

Of course, at first glance, it may seem that weaving a phone case from rubber bands with a hook is much harder and longer. In fact, this is absolutely not the case - both methods have their own charms and conveniences. To crochet, you need to acquire directly the tool itself - a crochet hook. Further, everything is simple - weaving goes in the "chain" way. At the same time, keep in mind that the chain link has about 1 cm, so it’s easy enough to calculate exactly how long the product you need and how many elastic bands it will take.

To get started, take the first elastic band, turn it into a figure eight and put it on the hook - that's the first loop. Next, take the next one and thread it through a double loop - it turns out four loops already. The outermost two loops are pulled through the new irises all the time and returned back to the hook. Thus, we get the whole cover - elegant and beautiful.

open case

In order to weave an interesting phone case from rubber bands, you do not need to have any unusual knowledge. It is enough to have a machine at hand. You should not try to use rubber bands on forks - it will take an insane amount of time and does not guarantee a good result, because after all, a phone case is not a bracelet at all.

If you don't like having your phone closed all the time, you can weave a case with an open screen. This does not require anything new - a machine (preferably double) and elastic bands.

The beginning is quite standard - eights are thrown on the columns. Then, an elastic band is put on every second pair of pegs. Don't forget to leave some space for the screen. After that, irises (of a different color) are put on each column around the perimeter. Rubber bands from under the bottom rise up and are reset. Then again, elastic bands are put on around the perimeter - and everything repeats. Here, in fact, is all the wisdom.

Small bonus - accessories

The most standard case can always be distinguished from other similar products with the help of accessories. A variety of patterns is excellent and bright, but the product will look much brighter, for example, with bright flower from rubber bands. In order to make it, it will not take much time and rubber bands. For this product, somewhere around 15 rubber bands will be used. Weaving itself takes place with the help of a slingshot, since the flower will be quite small.

An elastic band is wound on one horn of the fork in three rows. Then two irises are put on both horns, and the triple elastic band is removed from under the bottom to the center of the double one. Then removed to the opposite horn. Everything is repeated five times. Thus, on one of the horns of the fork, five double rubber bands are obtained with an inner row of triple wound ones. After that, another iris is put on both horns, and all the elastic bands from the horn are removed into its center. It turned out an elastic band on the horns, and in the middle of a flower. The end of the connecting elastic is pulled out, threading through the other. Everything, it remains to spread the petals - and the flower is ready. It can be put on a cover while weaving - and you get a wonderful accessory.

In the same way, you can decorate your future rubber phone case with a variety of stars, figures - everything you want to stand out.

Conclusion

As you can see, it’s quite easy to figure out how to weave a phone case from rubber bands. With patience, desire and a small amount of imagination, you will definitely get something that will distinguish you in the crowd of the same gadget users. At the same time, the model of the phone or its trickiness does not matter - with such a case, made with my own hands, you will always be at the very peak of fashion trends and, importantly, you will never merge with the crowd. Such exclusive item only you and no one else will.

Of course, a case is far from the only thing that can be created from these wonderful Rainbow Looms. Bracelets, rings, toys, key chains - a great opportunity to express yourself in creativity, and not only yourself. Children will be happy to join you in this wholesome fun, and you will have a fun and productive time together. After all, beauty is a terrible force!

Do you like to make unusual crafts with your own hands and do you have a mobile phone? We suggest you do original case for your phone and surprise your friends and relatives bright decoration. By the way, the cover can become great gift, it will be exactly unique, and will also protect the device when falling from a small height.

Weaving from elastic bands Rainbow Loom almost instantly captivated the world of needlewomen. Using this viscous material, you can create almost anything: bracelets, rings, clothes for dolls, key chains and even toys. Weaving a phone case is not a difficult task, it is enough to have at least basic weaving skills. Such weaving is so simple that you can make several covers, and every day pay attention to those around you. beautiful decoration your gadget.

There are several techniques for weaving, but if this is the first job, it is better to do simple weaving, and over time, add drawings, patterns, diamonds and stripes in different variations.

Cover for mobile from elastic bands "Rainbow"

Several techniques for weaving a case for a mobile device

It is difficult to create a protective case from elastic bands for a mobile only at first glance. You need to weave the first row, and the rest - reusable repetitions. In time, it takes a little more than creating a keychain or bracelet. Depending on the weaving technique and the size of the mobile device, the required number of elastic bands can reach up to 1000 pieces. There are different techniques for weaving, but it is best to use a loom (not necessarily a professional one) and a standard hook. Most likely, for the first time it is difficult to come up with the appearance of a craft, we suggest that you look at several options that are presented below and choose something suitable for yourself.

Again, depending on the size of the device, the number of elastic bands and posts on the machine may increase or decrease. We offer a standard size of 24 bars. If you have a professional machine, remove the middle row, there will be enough space between the extreme ones.

We decided to save your time a little, as a text explanation with photo illustrations can take a lot of time, so we picked up a couple good videos lessons, which shows in detail how to weave a phone case with your own hands.

If your gadget is larger than the standard size, then it is better to watch the second video, but it is best to watch both, as they describe different techniques.

Having spent a little time and effort, you will get a unique, and most importantly beautiful, case for a mobile device that will definitely please friends and family. This unusual craft handmade will also be a great gift for a birthday or any other holiday.

Related crafts:

You can weave a cover from elastic bands on the machine with your own hands. Such products are valued for originality, uniqueness and originality. It can be as your personal rubber band cover, or as an option for starting a small business. All kinds of accessories made by hand, many users buy with more pleasure than standard factory covers.

Weaving from rubber bands using a special machine is not difficult. Therefore, if you do not have experience, first try to weave an accessory for your own phone, get the necessary skills. We recommend supporting the weaving instructions with video lessons. They clearly show that weaving from rubber bands is a simple, sometimes exciting activity.

Weaving a phone case will allow you to get certain benefits from the process itself and its result.

Originality. Weaving two identical covers is not an easy task. Therefore, each new accessory will be different from the previous one;
external attraction. Case for mobile phone it turns out interesting, beautiful, complements the smartphone itself or hides its boring design;
Variability. With the help of the machine, you can weave a lot of accessories of different colors, shapes, sizes. This will allow you to change covers whenever you want;
Value self made. Weaving covers can become great idea for business. At the initial stages, you won’t earn much, but for a student or schoolchild, making such crafts will bring your own income;
Versatility. Weaving a universal accessory made of elastic bands, which is suitable for different models phones, or make a case adapted to a specific phone model - your personal choice. If these are universal covers, when you change your smartphone, you won’t have to weave a new accessory;
Demand. The cover made of rubber bands is gaining serious popularity. Because you have the opportunity to be at the head fashion trend or take advantage of the demand in the interests of your small business.

Tools and materials

Now let's talk directly about how you can make an original accessory for your phone with your own hands using rubber bands and a special machine.

To work, you will need a small set of tools and materials:

A machine called the Rainbow Loom. It is with its help that anyone can make not only a case, but also bracelets, crafts, all kinds of accessories;
Rubber bands for the machine. They are offered as a set. From the number of planned covers that you want to make, and their color palette, take the desired number of rubber bands. Take with a margin so that you don’t have to run to buy more later;
Plastic hook. It will be needed at some stages of weaving as an auxiliary tool.

Weaving

When everything is ready, you can start weaving. We advise you to weave an accessory from rubber bands, based on our instructions and video tutorials. So you will be able to understand all the nuances of the process.

Machine preparation. To weave an accessory from rubber bands, first set up your loom. The setting is to remove the middle row of columns. The machine consists of several identical rows of columns connected in parallel to each other. Since we do not need the middle row, we should extract it.
Hole direction. The holes in the posts of the machine must be properly positioned. From the side that is closer to you, the holes will look to the right. On the far row, the holes turn to the left.
Accessory bottom. Take an elastic band of any color, cross with a figure eight and throw it on the diagonally located second column of the first row and on the third column of the second row (far).
Now take another elastic band of the same color, repeat the previous operation, only from the second column of the first row, cling to the third column of the first row. So you get a cross of rubber bands.
On all other columns, except for the first two and the last two, put on the elastic bands in the same way. You should have several crosses.
Take the elastic band of the color you chose to form the bottom. Cross with an eight, throw 1 and 2 rows on the second pillar. Following this principle, repeat the operations on all other pillars.
You are done with the bottom. Now it's the turn behind the accessory wall. Choose a different color of rubber bands for the walls. The first gum is thrown over the second and third columns of the first row. The second gum - on the third and fourth. So throw the elements until the row ends.
Next, without twisting the figure eight, put the elastic on the penultimate column of the first row and a similar column of the second row. We do not take into account the most extreme columns; they do not take part in the formation of the cover. Therefore, conditionally, the last column is the penultimate one on our machine.
Repeat the procedure for joining the elastic bands on the second row to form the wall.
To weave the walls, you need to do the following. Take the hook, carefully remove all the elastic bands of the first selected color from the second column of the first row through the products of the second color for the walls. Following this principle, remove the first row.
Turn the machine over to your far side. From right to left, by analogy, you need to make the second row.
Take the third color of rubber products and repeat the steps discussed in paragraphs 7-9.
The first row is done in the same way.
By varying the colors of the products, you need to make a weave of two more rows.
We make a window in the accessory. To do this, close in the first row the loops that you put on on several pillars. Count the last three columns on the left that are taking part in the work, and hook the hook into the third one, grabbing the lowest elastic band from the inside. Remove it from the column, throw it on the next column. Repeat the procedure, moving to the third working pillar.
From left to right from the fourth working column, all thrown rubber products are removed. Stop at the third pillar from the end. This will form the bottom edge of the case window.
Throw on another row, but now skipping places under the cover window. Weave this row.
Then you can choose any colors of rubber to make 15 rows according to the already known principle.
To close the accessory window, throw elastic bands around the perimeter of the lower and upper row, as described during the initial weaving of the product.
Repeat step 15, throwing from the previous pillars to the next columns of gum located below.
We weave all other elements as before.
Throw a new row around the entire perimeter of the machine, weave.
Next, 4 rows are woven, as in the case of the lower part. Now turn for the upper part after the window.
We are approaching the final stages. Repeat the operations of the second step, crossing and putting rubber products on 1-2 work posts. The second elastic band is thrown over, as in step 4. Throw the products with crosses on all the columns that remain.
We repeat step 6 of our instructions.
Remove all the lower rubber bands, throwing them onto the upper ones.
Close the hinges of your accessory by repeating the window decoration steps.
On the same pillar, the closing of all loops, from which it all began, is completed. Take another rubber band, insert the hook into the column and pull the loop through the side opening under the elastic bands put on it. After that, you can thread one part of the loop into another, tightening the knots.

Carefully remove all related elements in sequence to enjoy appearance finished accessory. You managed to weave an excellent thing with your own hands.

At first it may seem that weaving a case for your phone will be problematic. But if you complete all the steps at least once, in the future you will be able to do everything automatically, without getting hung up on certain steps.

With each passing day gaining more and more popularity recently engulfed the whole world game called Rainbow Loom. You must have seen someone bright bracelets from elastic bands or multi-colored sets with elastic bands in stores. It is possible that until now you have wondered why they sell such small rubber bands for money. Today we will reveal this secret to you. will tell you all about the secrets of Rainbow Loom fun and tell you how to make a phone case out of rubber bands. Let's go on this rainbow journey together!

What is Rainbow Loom

Let's start with the history of this game. Rainbow Loom is actually the name of the machine, not the rubber bands themselves. This device was invented by Chong Chun Ng in the USA (Michigan). This Malaysian immigrant carefully observed his daughters as they wove various ornaments out of rubber bands. He decided to simplify their task and, with the support of his wife, created a special machine. Initially, it looked like a wooden board with nails driven in, and a dental tool played the role of a hook. The invention seemed extremely interesting to Chong - and he decided to introduce it to the toy market.

The inventor hired a toy company, which began to produce machine tools. Contrary to the expectations of the author, the game was not very popular, and the project threatened to fail. Unexpectedly, Chong found a way out - he created a video channel on which his niece showed how to make various crafts. The videos helped attract interest from potential buyers - and the "rubber" business went uphill.

How to weave from rubber bands on the loom

A modern machine is a board of their plastic with special pegs. Its length is 20 centimeters, and its width is 5.1 centimeters. In the weaving process, fingers and a special hook are used. The Rainbow Loom also includes a set of rubber bands and 24 fasteners.

Today, this originally children's fun has become so popular that crafts are created not only by children, but also by adults. All kinds of things are made from rubber bands - from ordinary bracelets, key rings, handbags - and ending with clothes! Handmade lovers even got the hang of it make cases for your smartphones. It turns out very original and quite budget. Do you want to learn how to weave a rubber band cover with your own hands? Read on!

Consider the principle of making a cover of two colors. For work we need:

three-row machine rainbow loom;
elastic bands of two colors;
hook.

How to weave from rubber bands (video)

You can see this whole scheme on how to make a cover out of rubber bands in the video below.

Rubber bracelets or phone cases?

We have shown you only one option. But if you like this idea, then you can also weave a case in the form of a case for your pocket "friend" and come up with any color that you like.

Be creative, create original accessories, stand out - and don't forget to take care of your devices!