Luminous bracelets are an essential element of a bright holiday. How to make glowing objects How to make a bracelet that glows pink

Crafts from luminous objects have already gained immense popularity in the Internet community of foreign handmakers. In our country, this trend will probably not become widespread soon. You can prepare in advance and be one of the first to surprise your friends. Usually for such crafts, fluorescent paints, multi-colored LEDs or an electric cord are used. Here are some specific ideas.

Idea 1: sci-fi cassette

To create such an accessory, you need to take a regular cassette and disassemble it by pulling out all the screws with a screwdriver. After that, the magnetic tape is removed and an electric cord is inserted in its place. The electric cord is powered by a battery (see photo). Therefore, it must be periodically removed and recharged. The author of this craft glued a pendant to the cassette and made a pendant out of it.

Idea 2: magic bracelet

To make a bracelet from the same cord, organza was used. This is a translucent fabric through which light penetrates well. The purple fabric used for this craft gives the decoration a mystical look. In order for the bracelet to keep its shape on the hand, a thick wire frame must be inserted inside it. File the ends of the cut wire so that they do not hurt your hand. After that, an electric cord is wrapped around the frame. At the end of the work, you need to sew up the bracelet so that there is a small hole in it, through which you can put the recharging for the cord. For example, you can make an assembly along the edge of the fabric so that the hole opens when the threads are pulled. Or use a button closure. After that, you need to attach a lock bought in a hardware store to the bracelet.

[[

Idea 3: sneaker modification

All kinds of modifications of sneakers have long been taken out as a separate subspecies of handmade by lovers of the so-called street culture. To make sneakers glow in ultraviolet light, you just need to paint them with a fluorescent solution. If you cannot find a suitable shoe paint, you can buy white textile paint separately and mix it with a luminescent pigment. Here's what these sneakers look like in the light of a nightclub:

When painting, do not forget to take out the laces and process them separately. If you paint them without removing them from the boot, then there will be empty places that will not glow. One more more interesting way shoe modifications. For him, you need a decorative adhesive tape simulating a bicycle photo reflector. Here's the effect you can achieve by sticking this tape over dyed sneakers:

If you are just starting out with glowing things, do the simplest experiment possible. Buy glow sticks, cut them up and pour them into a green soda. Thus, a luminous solution of a bright acidic hue will be obtained. Warning: this liquid should not be drunk. It is created purely for aesthetic purposes.

Luminous bracelets are sold in the form of sticks. The advantage of these decorations is that they do not require batteries, they just need to be put on and go into the dark.

Use original decoration you can at home, on the street, in a club and other places, while you can absolutely not be afraid of any fires and other troubles. This is a completely safe device, unless you try to break it and try the contents.

Of course, luminous bracelets are also used by adults, but they give special joy to children. You can buy glow sticks in specialized stores, and now they have appeared in small retail outlets with other goods. Each stick is twenty centimeters long and 5 millimeters in diameter. Special locks on the ends of the sticks provide comfortable and secure wearing of the accessory. At the same time, the versatility of the lock connectors makes it possible to fasten them together. Thus, multi-colored beads can be created from several sticks.

What are glowing bracelets made of?

The question of the composition of colorful jewelry is of great importance, since it is worn on the body. Poor quality products can cause allergies. Luminous bracelets should consist of plastic, the cavity inside of which is filled with a special liquid, which, when mixed with certain reagents, forms the same light of different colors.

That is why, in order to get a uniform color, you just need to shake it so that the reagent is distributed evenly inside the plastic flask. Accordingly, all colors are quite natural. Glow in the dark bracelets can not only serve as bright accessory, they can still be of practical use. For example, you can put it on your child in the evening before a walk in the yard, and he will always be visible in the dark.

How to charge luminous bracelets?

There are many suggestions on how to extend the life of the bracelet. However, keep in mind that manufacturers guarantee a glow for 12 - 24 hours, depending on the quality of the accessory.

The stick will emit light only as long as the reagent contained in it is active. Therefore, to activate the light, you can simply crush the bracelet, bend it in different directions, this will speed up the reaction, and the light will become brighter.

There is also an opinion that to charge the bracelet you need to put it in the refrigerator. But this will only help to stop the reaction during daylight hours. To do this, the bracelet should be put in the refrigerator. And when you need it, just take it out and let it warm up.

In principle, bracelets are considered disposable. At the same time, their cost is not so high. You don't need a lot of investments to buy one bracelet. In addition, very often they are sold in sets, which include products of different colors.

Thanks to all its advantages, this decoration will probably not lose its popularity among adults and children for a long time.

In the section on the question there are sticks luminous bracelets how to charge)) set by the author Yoma romchikov the best answer is no. The stick contains reagents that, when mixed, react with the release of light (chemioluminescence, if I'm not mistaken). One of the reagents is in a flask, which, when bent, breaks and an irreversible reaction occurs. Freezing only stops the reaction.

Answer from throw yourself out[guru]
Hold in hot water

Answer from chevron[guru]
No way. They are disposable.

Answer from electrosleep[newbie]
Vopsche, in theory, the sticks are not charged, they just burn from 6 to 12 hours. The sticks (bracelets) contain phosphorus crystals, when we break the "bracelet" the crystals break and begin to glow. Roughly speaking, what is broken, meaning solid and very small substances, can no longer be repaired. And be careful, phosphorus is very poisonous !!

Answer from Kostya Yakunin[guru]
After 4 - 6 hours in the freezer (complete freezing), they work 10 - 20% of the total time, giving off a little less than half the light power, and so on not indefinitely, the composition gradually exits in the form of a gas.

Answer from Alena Zhikhareva[newbie]
put it in the freezer for 5-10 hours

Answer from Alexey Magon[newbie]
Yes, they do charge in hot water.

Answer from Irina heroes of labor[newbie]
Buy new

Answer from German Yangarov[newbie]
No way. The stick contains reagents that, when mixed, react with the release of light (chemioluminescence, if I'm not mistaken). One of the reagents is in a flask, which, when bent, breaks and an irreversible reaction occurs. Freezing only stops the reaction.

firmly entered the life of modern youth. The original accessory will suit any “outfit”, emphasize individuality, and in the end, simply draw attention to the owner of an unusual piece of jewelry. The variety of colors and options for using the product is great.

Bracelets

Luminous bracelets can have the following types:

Leisure

Woven luminous bracelets came to us from the American continent. Special sets of elastic bands for weaving are very popular. They create unique masterpieces, unique in beauty and design.

This type of needlework is called Rainbow Loom. They are great for adults and kids. Develop fine motor skills hands creative thinking, awaken fantasy, develop perseverance.

You can weave not only a bracelet of luminous rubber bands. Earrings, pendants, rings will be a great addition. Made in the same style and color scheme, such sets can become a real decoration. They are perfect for a youth party, disco or holiday.

Safety

Glowing bracelets are absolutely safe if used correctly. The tightness of the design of neon products does not allow chemical components to contact human skin in any way. Of course, if you try to disassemble such a bracelet, and even taste its contents, the consequences can be the saddest.

Luminous rubber bands of European manufacturers are carefully controlled. Products hazardous to health, in principle, cannot appear on the shelves of stores in Western countries. Chinese rubber bands should be used with care (like neon bracelets). No one dares to vouch for the quality and safety of handicraft shops.

The LED bracelet cannot pose any danger at all. Ordinary batteries will not be able to give out a sufficient electric shock to in any way harm a person.

Usage

Glow in the dark bracelets are not only a fashionable and original accessory. He will help out great on a walk with the children in the evening. If attached to outerwear child, it will be much easier to keep track of the fidget.

For the same purpose, only for their pets, dog lovers use this “toy”. Dogs, especially dark colors, are practically invisible at night (in autumn, when there is still no snow). Such a "decoration" guarantees complete control over the whereabouts of a four-legged friend.

You can attach such a bracelet to a small schoolchild's backpack so that it can be clearly seen on dark sections of the roadway.

Quick article navigation

LED lights

• red;
• purple;
• Orange and others.

Main characteristics

Glowing paint

• Phosphor (25 grams);
• Varnish (75 grams);

Today, even an unprepared naturalist can surprise guests or please his loved ones by making a bright and original liquid that will glow in the dark. This exciting process will not take much time, and the final result will surely bring you and your friends a lot of positive emotions. In this article, we will tell you in detail how to make a luminous liquid from improvised means, which will decorate any home experiment.

What you need to know before making the original liquid

Before you make a luminous liquid at home, you need to take into account several nuances, the main of which is the fact that after the experiment there will definitely be dirty dishes which will have to be washed.

In addition, you must carefully follow the order of adding substances and their dosage, otherwise you will most likely not succeed.

Also, do not forget about safety precautions, since most of the components contain chemicals that can cause harm to health and cause serious injury.

Listed below are the most affordable and least complicated ways that allow you to get glowing liquid at home.

How to quickly make a glowing liquid from improvised means

So, recipes for making bright water on this moment can be found great amount, especially if you search the vast expanses of the World Wide Web. However, you do not need to immediately choose the first option that comes across, otherwise you risk wasting your own efforts and material resources for nothing. Below are relevant and inexpensive ways that will help even a novice lover to get colorful, memorable and aesthetically glowing water without any problems.

Method number 1, which will require the following ingredients:

• Luminol (this component can be purchased at specialized chemical stores) - only 2-3 grams;
• Water - 100 ml;
• Hydrogen peroxide 3% (sold in any modern pharmacy) - 3 gr.;
• Caustic soda solution - 10 ml;
• Copper sulfate - 3 gr.;
• Fluorescent dyes;
• Suitable containers (test tubes, flasks, glass jars, glasses).

After all the components are in a strictly defined dosage, we make luminous water in the following sequence:

1. Pour water into a specially prepared flask and gradually dissolve luminol in it - a chemical reagent that has unique property glow blue in neutral and acidic environments.
2. We add hydrogen peroxide to the flask, and then we send copper sulfate there, instead of which you can also use blood salt or ferric chloride.
3. 3. Carefully add caustic soda to the flask, then carefully stir the contents, turn off the light and admire the beautiful bluish glow of the water.
4. If you do not like the blue color or you need to pick up something brighter, then any fluorescent dye (brilliant green or rubren) can be added to the solution in the flask.

Method number 2, for which you will need:

• Luminol - 15 gr.;
• Dimexide (or dimethyl sulfoxide) - 30 ml;
• Dry alkali (KOH) - 35 gr.;
• Fluorescent dye;
• Flask or test tube with stopper.

The sequence of actions for preparing a luminous liquid will be as follows:

1. Gently mix luminol, dry alkali and dimexide in a flask.
2. Close the flask with a stopper and shake gently.
3. We turn off the light and check the aesthetics of the glow, which should be a bluish tint.
4. In the case of a weakening of the glow, it is enough to slightly open the flask and let some air into it, after which the liquid will acquire its original bright shade.

Method number 3, implying the following set of components:

• Solution washing powder without dyes - 20 ml;
• luminol solution 3% 5 ml;
• hydrogen peroxide 3% 10 ml;
• potassium permanganate crystals - 2-3 pcs.;
• tall glass - 1 pc.

The sequence of actions to obtain this solution is as follows:

1. Fill a glass with a solution of washing powder.
2. Add luminol solution along with hydrogen peroxide;
3. Separately, we grind the crystals of potassium permanganate, after which we also send them to a glass;
4. In the process of mixing, the mixture will inevitably foam and sparkle with bright colors.

We hope that the above material will help you make glowing water at home, as you can see, the process is not that complicated.

We make a phosphor with our own hands at home

The main thing is not to rush, observe the dosage and use quality ingredients in the required quantity. Remember, all the ways to make luminous liquid without luminol are fake. You can check yourself. We also recommend reading what's inside the glow sticks.

Young people at all times loved to stand out in various ways. To each young man or a girl wants to have a non-standard little thing in her wardrobe.

Not so long ago, various squeaky sneakers were in fashion. Technological progress has increased the number of ways in which you can "stand out". One of the most relevant and fashion accessories now - these are shoelaces that can glow in the dark.

If desired, this accessory can be used as a bracelet or a patch on clothes (which becomes extremely noticeable with the onset of the dark time of the day). It is not only original, but also safe. You should also not forget that such "laces" are only a decorative design that does not provide for tight lacing.

Consider several ways to make glowing shoelaces at home:

Quick article navigation

LED lights

Luminous shoelaces can be made using an electronic power supply that has a built-in LED:

• The LED is placed in a silicone cord that can transmit light;
• Power is supplied by a standard battery.

The colors of these laces can be very diverse:

• red;
• purple;
• Orange and others.

Main characteristics

• The creation of such laces implies that their length should be standard - 80 cm;
• Functioning is possible in three modes (continuous glow, fast blinking, or slow blinking);
• They are able to glow without recharging for 70 hours, and then it will be enough just to replace the power supply.

Luminous laces will be a great accessory not only for going to the club, but also for cyclists.

Glowing paint

Another way to make your shoelaces glow is to use luminous phosphor paint.

How to make glowing liquid (water) at home?

To prepare 100 grams of luminous paint you will need:

• Phosphor (25 grams);
• Varnish (75 grams);
• These ingredients must be mixed. Periodically, this mixture needs to be recharged with sunlight.

It should be borne in mind that "home" paint is able to glow for a shorter time than "shop".

A phosphor is a powder substance that is capable of converting absorbed energy into light. You can buy it either in specialized outlets or in the relevant online stores.

However, it is not necessary to use such sticks at a party. Their use can be effective in nature, hiking or fishing. Speleologists and rescuers, who are inextricably linked with work in conditions of extremely limited access to natural light, actively use sticks with a fluorescent reagent.

Components

• blowtorch;
• pipette;
• hydrogen peroxide;
• teflon tape;

• 20 g of luminol;
• 30 ml of dimexide;
• 30 g of dry alkali;

step two

Using a heated blowtorch, the tip of the pipette is tightly sealed. Then, through the remaining open hole, the pipette is filled with a solution of hydrogen peroxide, and the other end is again sealed with a blowtorch.

??? ?????? ?????? ?????????? ??????? ???? ?? 5 ????? ??w?? ????c?

After completing the work, it is advisable to thoroughly wipe, clean and set aside.

Step Three

Unfortunately, neon sticks created by the above method can only be used once. And the glow of such home-made products cannot be called too long. As for the advice on the possibility of charging a stick with a luminous liquid in a refrigerator or microwave oven, which today is plentiful on the Internet, it is not recommended to engage in such amateur activities.

Both methods are extremely ineffective and, moreover, do not exclude the infliction of irreparable harm to one's own health.

You can make glow sticks today in ordinary home conditions. To do this, you do not need to spend money on the purchase of absolutely no expensive materials. The main thing is to prepare well and act strictly following the technology.

What can you use a magic glow stick for?

Colored fluorescent sticks have recently become one of the most common attributes of entertainment mass events. They are used during entertainment equally often by both children, youth, and older people. Often, the idea is used to create luminous decorations for the hall, musical instruments, costumes. This approach allows you to organize a really spectacular, unforgettable show.

However, it is not necessary to use such sticks at a party.

Experiment: space glowing jars

Their use can be effective in nature, hiking or fishing. Speleologists and rescuers, who are inextricably linked with work in conditions of extremely limited access to natural light, actively use sticks with a fluorescent reagent.

Always having a few homemade glow sticks with a bright chemical reagent in stock, you don’t have to worry about running out of a flashlight or losing your main light source at night.

Components

To create glow sticks with my own hands at home, you will need:

• plastic, maximally transparent flexible tube made of polyethylene;
• prepared fluorescent liquid;
• blowtorch;
• pipette;
• hydrogen peroxide;
• teflon tape;
• copper caps for blocking the tube.

Creating Fluorescent Liquid

If you managed to collect all the above components, which are required for glow sticks to give a bright glow, you can immediately get to work. However, buying a fluorescent liquid, which costs a lot of money, can be a definite obstacle for some people.

In cases where there is no desire to spend money on buying a luminous neon stick base, you can try to make it yourself. In this case, you will have to get the following chemical components:

• 20 g of luminol;
• small glass flask not more than 0.5 l;
• 30 ml of dimexide;
• 30 g of dry alkali;
• simple fluorescent dye.

Since the composition of the liquid contains a sufficient amount of potentially hazardous chemicals, the components for its preparation should be mixed as carefully as possible, working in rubber gloves, respirator and protective clothing.

To begin with, alkali, dimexide and luminol are combined in the above quantities. The resulting composition is placed in a flask and shaken well, after which the necessary reaction must occur, which will subsequently lead to the glow of the liquid. Adding a chemical dye will help give it the desired shade.

How to make a glow stick: step one

Armed with a polyethylene tube, copper caps to plug its opposite holes and Teflon tape to securely fix them, it is necessary to assemble the future container of the luminous liquid. The neon glow stick should be assembled in such a way that one of the copper caps can be easily unscrewed.

step two

Using a heated blowtorch, the tip of the pipette is tightly sealed. Then, through the remaining open hole, the pipette is filled with a solution of hydrogen peroxide, and the other end is again sealed with a blowtorch. After completing the work, it is advisable to thoroughly wipe, clean and set aside.

Step Three

A pre-prepared luminous liquid, diluted with a fluorescent dye, is poured into a polyethylene tube through one of the open holes with an unscrewed cap. A sealed glass pipette with hydrogen peroxide is placed inside. It is necessary to fill the tube to the maximum, until the pipette is completely immersed in the liquid. After screwing the cap tightly and additionally fixing it with Teflon tape for reliability, you should make sure that the fluorescent liquid does not spill out.

How to use the finished product?

To activate the glow sticks you created yourself, you just need to bend the polyethylene tube by breaking the pipette. As a result, the peroxide will combine with the fluorescent reagents, after which the necessary one will occur and the stick will light up with a bright glow.

Unfortunately, neon sticks created by the above method can only be used once. And the glow of such home-made products cannot be called too long. As for the advice on the possibility of charging a stick with a luminous liquid in a refrigerator or microwave oven, which today is plentiful on the Internet, it is not recommended to engage in such amateur activities. Both methods are extremely ineffective and, moreover, do not exclude the infliction of irreparable harm to one's own health.

If there is an urgent desire to use the glow stick again, then it is better to thoroughly rinse and clean the parts of the product, get new reagents, take a whole glass pipette and perform the operation again, repeating all the successive steps again.

How to make a glow stick beautiful?

Thanks to the fact that today a good half of the work is done for us by machines, we have more and more free time to create and create more and more new things. And this applies to all spheres of human activity, because almost every one of us strives for absolute perfection. If in the technological sphere this desire is expressed in the creation of robots, and in the consumer sphere - in new products without GMOs, then in the field of chemistry and the industry associated with it, a person tries to come up with something spectacular and necessary. One such relatively recent discovery is the creation of neon, a substance capable of glowing in the dark. After his invention, things like glow sticks became available, the composition of which includes neon that reflects in the dark.

This stuff is pretty new. It has become very popular and really needed in many areas. It is precisely due to the fact that it has the valuable property of glowing in the dark that it has been added to many things to make them more unique, unusual and, of course, convenient. If we take the same glow sticks as an example, then even they began to be used not only as a toy for children, but also as additional lighting in cars, clothes and equipment.

However, we will not delve into the details of exactly where neon began to be used. We will talk about how to make a glow stick for your child and please him with an unusual and beautiful gift.

To begin with, it must be said that such presentations must be given to slightly older children who have already lost the habit of tasting any toy. Even if the wand is strong and flexible enough, but given that children's teeth are very sharp (especially when they are just erupting), it is quite possible that the wand may not withstand such an onslaught. And it is the latter that poses a great danger to the child, because the ingestion of neon into the body will cause very severe food poisoning. That is why advice on how to make a glow stick is only suitable for parents whose children have already reached the age of 6-7.

Making a glow stick is easy enough and you don't need to be a chemist to do it. To get started, you need to visit a store that sells reagents for experiments and ask for a neon solution. Such a solution already contains all the basic ingredients that allow you to quickly and easily make a glow stick. The instructions below are pretty simple. In the same store, you can ask the seller if there are special thin hollow plastic tubes that will be needed for manufacturing. You can’t take ordinary tubes, because the neon will immediately begin to corrode the walls, and as a result you will get a hole in a few hours. Having chosen a suitable tube, we return home and proceed to manufacture.

Before making a glow stick, it is best to cover the workplace with newspapers so as not to stain the furniture, which, when neon hits it, will begin to glow in the dark. We take a pipette and begin to pour the neon solution into a tube.

As soon as it is completely filled, we close the special cap at the end, and it is best to cover it with transparent varnish so that the child cannot open it. By knowing how to make a glow stick, you will be able to please your child and make a truly unusual thing.

home and family
Do you know how to make glowing shoelaces from improvised means?

Modern shows and dance floors are literally flooded ...

home comfort
How to make a magic wand at home: tips from a smart mom

Have you adults ever wondered how to make a magic wand at home? Remember childhood and the tale of Cinderella, where is the fairy, godmother hardworking girl, gathered her pupil to the ball. One…

home comfort
How to make glowing water at home? Experimenting with children

Not so long ago, glowing water has become a very popular pastime. You can also get it at home. But this procedure leaves behind quite a large number of dirty dishes.

How to make glowing liquid (water) at home

So keep in mind that…

home comfort
How to make a luminous liquid from improvised means: surprise and decorate

Most people, arranging holidays, romantic dinners or just wanting to please their kids, puzzle over how to decorate it all and make something unusually beautiful. You found what you were looking for! We race…

Arts and Entertainment
How to make simple and beautiful pattern- geometric ornament

As you know there are different kinds ornaments. They are plant, object, landscape, astral, floral, fantastic, calligraphic, etc. It all depends on what elements are made from…

Computers
How to make a magic wand in Minecraft and how to use it?

Every Minecraft gamer knows that there are a large number of modifications for this game. It would seem that this project provides incredible opportunities that you can use just endlessly, but still ...

Computers
How to make a glowing stone in Minecraft and where to use it

When you play Minecraft, in any case, you will have to think about using any lighting items. The fact is that the game changes the time of day, and with the onset of night it becomes dark. No lighting...

Computers
For fans of night work on PC: how to make a glowing keyboard and more!

The question of how to make a luminous keyboard arises when the user works a lot in the dark without lighting. Highlighting the input device solves this problem. There are two ways to do this. First…

beauty
How to make yourself beautiful hairstyle to become irresistible

Winter has passed, warm spring days are outside, the soul is singing, and I want to take off my hat as soon as possible, dissolve my magnificent, beautiful whirlwinds and walk along the street, striking those around me with my irresistible hairstyle. But …

Fashion
How to make glowing sneakers? Where to buy sneakers with luminous soles?

Luminous sneakers have been known to the fashion world for a long time. Since their inception, they have been used by various fashion designers and manufacturing companies in a variety of variations. For example, similar models of shoes have that ...