home » School » Watch case. Making a wall clock out of cardboard: decoupage and quilling (master class) How to make a watch case with your own hands

Watch case. Making a wall clock out of cardboard: decoupage and quilling (master class) How to make a watch case with your own hands

Sometimes there is a desire to change something in the atmosphere of the apartment, and global repairs require a lot of money and effort. Then come to the rescue original crafts e.g. clock. Homemade watches are easy to create from improvised materials. The finished item will not only decorate the room, but also become a budget gift that will provide the recipient with a lot of positive emotions.

Creating decorations for the home does not take much time and is a pleasure. A variety of options will help fit the clock into any interior. Master class how to do Wall Clock with his own hands he will tell how an unusual craft is born in just a couple of hours.

Home clock

As a basis, a clockwork from an old device or bought in a specialized store is suitable. Children can be involved in the process of creating a masterpiece.

Consider one of the options step by step instructions for wall clocks. To design the frame, you will need colored pencils or felt-tip pens. Drawing supplies are attached to the round or square base with glue.

Pencils play the role of rays. It is not necessary to strictly follow the combination of colors, the length of the pencils and the distance between them, in any case, the watch will turn out to be bright and cheerful.

You can also make a wall clock for the kitchen with your own hands. For this option, coffee beans are ideal, wine corks and even tiny doll utensils. And cutlery looks good as hour hands.

Dry lavender flowers are sometimes used to create a Provence-style atmosphere, and shells and small pebbles will be transferred to the Mediterranean coast.

Decorating Techniques

Exists great amount a technician who shows you how to make a wall clock the right way. Let's consider the main ones.

Decoupage

To design products using the decoupage technique, you will need to prepare a plywood frame, paper napkins with pattern and clockwork.

Making a wall clock consists of the following steps:

Leveling the surface of the clock base. For this, fine-grained sandpaper is used.
Coating the mold with acrylic primer in several layers and drying thoroughly.
In the next step, you need to cut out a pattern from a napkin and compose a composition.
Next, the frame is covered with a thin layer of glue in the places of the future location of the pattern. A napkin is applied to the glue, the next layer is a cellophane film, which tightly presses the pattern to the surface.
The decoration is again covered with several layers of glue and dried thoroughly.
At the last stage, a clock mechanism is attached to the base.

Craquelure

The body of a wall clock with your own hands can also be made using the craquelure technique. The primed form for hours becomes covered with a special varnish. Its surface, when dried, forms cracks.

Some craftsmen create the effect of antiquity by rubbing the paint of the desired color into the cracks.

Other Clock Ideas

Ordinary hoops for embroidery can be given a second life by transforming them into a cheerful and bright clock on the wall. As a base, you can take a dense fabric of a color that will be in harmony with the interior of the room.

Excess parts of the fabric are carefully cut off, and 12 buttons are sewn along the perimeter of the circle in those places where the numbers of the dial are located. It remains to make a hole in the middle of the future clock, attach the clockwork and hang it on the wall.

One more unusual idea for the manufacture of interior decoration is the transformation of an alarm clock on legs. Scrapbooking products are sold in specialized stores. It may be different textile tapes, flowers and much more. With the help of decorative elements it is easy to create a unique composition that will decorate any interior.

A wooden board will serve as a stylish base for a wall clock. A wide variety of shapes are cut out of it.

Many shades of wood allow you to choose the best option for any room. On a wooden base, you can burn a pattern, this will make the decoration even more unusual.

The clock face can be embroidered or knitted, painted with acrylics, pasted over with sparkles. The more unusual the idea, the more unique the decorations for the interior will turn out. Other ideas for creating crafts can be seen in the photo of a wall clock with your own hands.

DIY wall clock photo

It can be difficult to find a beautiful wall clock and fit it into the interior. Especially for those who love original accessories and are not ready to pay a lot of money for designer models. In our selection - 10 ideas for creating unusual hours from unnecessary things.

Clock from disposable spoons

A very stylish and unusual wall clock can be made from several hundred plastic spoons. You get a fun accessory that looks like a bright flower.

Watches for book lovers

A godsend for lovers of reading is a clock made from book volumes. A composition made up of several elements will look especially impressive.

Bicycle wheel wall clock

Even from an old bicycle wheel you can get fashion watch. To do this, remove the tire and attach numbers and arrows to the rim.

Clock from wooden boards

A great accessory in the style of shabby chic will turn out from wooden boards. If there is no finished round blank, you can carefully cut the boards according to the drawn stencil.

Knitted watch

Ordinary boring watches can be updated with a bright knitted case, partially stretched over the front.

Wooden wall clock

A wooden round clock will fit perfectly into a rustic interior or an eco-style room. To make them you will need a piece of wood, well processed with sandpaper, a drill, hands and a clockwork. For originality, only one number can be written on the dial.

moon clock

You can stick an image of the moon on a pre-prepared dial - you get a very interesting art object.

clock made of wooden sticks

Even wooden coffee sticks are suitable as a material for creating original watches. But it will take a lot of patience and perseverance to carefully glue them together.

To create a cozy home, you need to think through many details. First of all, this applies to interior and decor elements, such as curtains, lamps, clocks and pillows. Today we propose to consider how to make a watch with your own hands. Anyone can make them. The main task is to install a large working mechanism, usually bought in a specialized store. The presence of an old clock will greatly simplify the task, because you can use their mechanism. Everything else depends on your skill and imagination.

Wall clock in decoupage technique (MK)

You can make a clock in the kitchen with your own hands from improvised materials. But if you want to create original product, then the decoupage style will be the perfect solution. These clocks look elegant and will be a unique decoration for the interior of the house. We offer interesting master a class that will help you create a wall clock yourself at minimal cost.

You also need to prepare:

clockwork hands;
wooden base (round or square);
napkins and ready-made patterns on paper;
acrylic paints;
brushes;
sponges and varnish.

Making watches with your own hands in the decoupage style is carried out in a certain sequence:

1. The workpiece is being processed . The basis of the future product must be sanded with sandpaper and coated three times with white acrylic paint, it will serve as the ground.

2. When the paint dries, a couple of centimeters recede from the edge of the workpiece and outline the future frame .

Outlining the frame

3. The basis is given an invoice , the color of painting is selected, the most suitable for the interior. The paint is diluted and applied with a sponge in a chaotic manner to age the product.

Applying a second coat of paint

4. The frame of the future watch stands out more dark color , brown paint is ideal for this.

Coloring the frame

5. From prepared rice paper cut pattern and applied to the workpiece. . If a napkin is used, then it is soaked in water and applied to the selected place on the dial. Glue is applied over the image.

Paste the image

6. Now you need to connect your imagination and make sure that the drawing fits organically into the surface. Paints of appropriate tones and a sponge will help here. With their help created smooth transition from the pattern to the surface of the dial. It is important to be extremely careful, if you cope with this task, then you are a great master.

Making a smooth transition

7. At this stage need to aging the product , for this, a two-component cracking agent is applied to the surface with a dry brush (you can buy it at a store where needlework products are presented).

Applying a layer for craquelure

8. After the craquelure dries, cracks will appear on the product, which will give it elegance. The workpiece is varnished as a protective layer.

We cover with varnish

At the end, it remains to install the arrows, the mechanism and glue the numbers (the latter can be drawn according to the template). Now the clock has a complete look, they can be used as decor for the kitchen, bedroom, living room.

Finished result

On video: making wall clocks using decoupage technique

Cardboard clock (MK)

Some needlewomen make do-it-yourself clocks for the kitchen from cardboard. Such a decor item can become not only useful, but also exclusive thing. Before answering the question of how to make a clock out of cardboard, you need to make sure that you have the appropriate materials.

For work you will need:

thick cardboard;
multi-colored caps or buttons;
working mechanism and arrows;
compass;
PVA glue.

To make your own wall clock, follow the steps below:

1. A circle is made on cardboard with a compass, after which it is cut out.

Cut out a circle from cardboard

2. Using glue, caps or buttons are glued in appropriate places.

Glue the lids to the cardboard

3. Numbers are depicted on the caps (use a marker or acrylic paint, depending on the material from which the parts are made).

Draw numbers

4. A hole is made in the center of the intended circle for installing the mechanism and arrows.

Making a hole

5. Last step- installation of the mechanism with arrows. A battery is also inserted to operate the watch.

As you can see, you can make a clock out of cardboard very quickly and you don’t need special skills for this, but such decoration will complement the interior of the selected room.

Quilling product(MK)

A good option would be to make a quilling clock. In such arts and crafts, paper strips are used. different widths and length. They twist into patterns, a composition is formed. You can make such a clock according to the following scheme:

The basis for the clock will serve thick cardboard or plywood. Black paper is glued to the body. To create contrast, decorative elements are mainly created from white or light-colored paper. When choosing a color, the interior of the room where the clock will be installed is taken into account. They should fit in harmoniously.

This is what the finished product looks like

Numbers are made from prepared strips of paper. To do this, use short strips. At the same time, decorative elements are twisted. Used for decoration various compositions. It can be flowers or just patterns. It is better to draw a sketch in advance, which will allow you to evaluate appearance future product.

We twist from paper strips patterns and numbers

3. The created numbers and decorative elements are glued to the selected places using PVA glue.

We glue the finished elements to the base

4. A hole is made in the center of the base and a mechanism with arrows is installed.

Installing the clockwork

Ideas for creating wall clocks are different. Focus on the materials that you have available, but there can be a lot of them. It is allowed to use additional elements, be it lace, satin ribbons, beads, rhinestones or even stickers. A wall clock for the kitchen made of paper or other materials will always let you know the time. And the made element of decor with my own hands will please the eye.

As an idea, you can try to do wrist watch, but in this case everything is much more complicated. This is due to their small size. The best option here would be to experiment with straps. Combining chains of different thicknesses will create original watch on hand. Also, zippers, elastic bands, beads can serve as a decorative strap.

Clock made of paper and CD (2 videos)

Homemade watch options (35 photos)

A watch without a case, let me remind you, looks like this:

1. The most classic option is to pack the watch in a wooden case. You can use any type of wood and design details. It looks strict, stylish, compact, but it seems to me that it is still boring for such interesting lamps.

2. This option emphasizes the lamps very well and theoretically should increase the readability of numbers in the daytime.

3. With four lamps:

4. The option is interesting, but the clock is no longer obtained as a separate element and inextricably follows the pen with the inkwell.

6. The easiest corpus to repeat at home:

7. One of the ideas not to make a case at all:

8. But this one causes frank misunderstanding.

9. Original, but cumbersome.

10. Concept from the Internet on the largest lamps.

11. For some reason, I personally like this watch the most.

12. And this option is also very nice. The black color harmonizes quite well with the orange-yellow tint of the lamps.

13. Here, too, a black case, but something is not right.

14. There is also the question of the need to illuminate the lamps. Lots of people make it, but does it really fit the watch so well?

15.

16. Almost unpackaged version:

17. Incomprehensible huge suitcase with self-tapping screws:

18. It can be seen that the person did a good job, but the design seems unnecessarily large. The same lamps on a simple classic stand, in my opinion, would have looked much prettier.

20. In some models, craftsmen also add a tube receiver / player.

21. Zakos under the game Fallout:

He himself has not done anything yet, but scolded others. Here's the trouble. Honestly, I don’t know which case can really be called the most successful for watches on gas discharge indicators.

There is a hypothetical possibility to order a case from wood on a woodworking machine or to make something out of metal. I will watch the situations, but I will also be glad to hear some ideas and opinions from blog readers.

In continuation of my acquaintance with the LaunchPad mps430, I propose an article on restoring the working capacity of old pendulum wall clocks.

An old pendulum wall clock with a chime from 1952 fell into the hands. The mechanism had traces of repair and was a disappointing sight. In watches of this class, unlike mechanical watches, the gear axles do not rotate in stones (rubies), but in the holes of brass plates. This, with prolonged operation and the absence of regular lubrication, leads to an increase in the backlash of the gear in the seat. The backlash builds up in proportion to the number of gears, and the watch eventually stops running. I don’t know how it is treated scientifically, but on my watch there were traces of the core in the area of \u200b\u200bthe seats, thus, apparently, they tried to reduce the diameter of the gouged holes. In general, I did not begin to restore a completely mechanical move.
It was decided to replace the spring stroke with an electromechanical one while maintaining the same functionality, namely, displaying the time and battle, as well as adding new features.
For work, we need: a pair of stepper motors from the printer, an RTC, a controller, keys for controlling the motors, an ionistor for storing parameters and timing in the absence of external power, and little things ...
Mechanically it looks like this:

Initially, the watch had 2 springs, one running, the second for fighting, a pendulum that ensures the accuracy of the movement, and so on. After removing the unnecessary parts of the modernization, there remained a minute and hour gear + a running stepper, as well as several gears, hammers and a stepper that controls the battle. In the picture above, the running motor, below - "combat". A separate dance with a tambourine was obtained by calculating the number of steps of the travel motor to move the hand by 1 minute. Since printer manufacturers do not take into account the gear ratios of the gears of old Soviet watches (I used gears planted on the motor shafts by printer manufacturers), it turned out that it usually takes 14 half steps to move the hand for a minute, and 16 half steps every 25th minute, so that time, the readings did not float away. Combat is easier. It took 3 revolutions of the motor (576 half steps) to hit.
Here's another picture:

As an RTC, I ordered literally Extremely Accurate I²C RTC on ebay, which means “terribly accurate”. Terrible accuracy according to the datasheet is determined by the built-in quartz and a temperature sensor that connects / disconnects correction capacitances to / from quartz. In principle, when checking the accuracy of the course, I was pleased with the result. For a week did not notice the departure of more than a second.
The controller is our favorite msp430g2553, the older one from TI's launchpad set. It carries 2 hardware serial interfaces on board, one of them will communicate with the RTC via I2C, the second will send debugging information to the computer via RS232.
Low-current motors (not that they are not accurate, but that they consume little current), a 7-channel transistor module ULN2003A is quite suitable for control. True, 8 channels are needed, but there were no other modules in the magic chest, so I assembled the 8th channel on a BC547C transistor and a pair of Schottky diodes that protect against reverse induction. For testing, it turned out that 5V is enough to power the motors.

On 34063, a DownStep DC-DC voltage converter is assembled from 5 and above (within reasonable limits) to 3.3V to power the RTC and msp430.

As a control, a mechanical encoder was amputated from the body of an old deceased radio. in the diagram it is shown as 2 buttons in a circle (the encoder itself). Its center button is also involved. To pull up its outputs to power, we will use the internal resistors msp430.

For feedback (response to control), let's add an LED.

Here it is time to describe the conceived feature. The RTC has an onboard memory stored by batteries and accessible like other registers via I2C. The idea is the following. Since we have a stepping motor, it is possible, knowing the reference point, to understand in what position the arrows are in this moment and store this position in the RTC memory. When the external power is turned off, the RTC continues to count the time and store data on the last position of the hands. When power returns, we take the old position from memory, the current time, count the difference, and bring the arrows up to the current time. Those. watches with auto-supply are obtained.
The reference point is set by setting the arrows to the 12:00 position and long pressing the central button of the encoder.
Next, the encoder sets the current time and at the beginning of the sixth signal, by briefly pressing the central button, synchronization is performed (the clock links the current position of the hands and the RTC internal time).
Here is a video of a half-hour battle and the operation of the encoder:

After this procedure, we have every right to carry out sound accompaniment of the move, namely the battle. Every hour we will beat the corresponding number of times, every half an hour 1 time, but at a faster speed. Actually, 1 blow is actually a blow of one hammer and the subsequent blow of two more. You can hear it on the video.

In order to perform a quality fight, we also need to know the relative position of the main gear that controls the hammers. To do this, when the power is turned on, we carry out “parking”. We turn the battle motor in the opposite direction until it stops. Fortunately, the motor is weak, and when this stop is reached, it just starts to buzz. After that, with the empirically obtained number of steps, we bring the “combat” gear to the desired position.
The fee is made by LUT in part. If it were not for the SOIC RTC case, I would do it at the assembly line as usual. And so, I left a place for crumbling, this is what happened:

back side: