How to sew an elastic band out of fabric. Four beautiful do-it-yourself hair ties - master classes for fashionistas and their mothers

Who came up with the idea of ​​fixing the hair with an elastic band is not known for certain. But it was definitely a brilliant idea. The life of long-haired beauties immediately became simpler. The accessory allows you to create great amount hairstyles. Yes, and just collecting hair in a bun, you can change the image. Decorative gum Suitable for children's hair just right.

The popularity of rubber bands came in the 90s. Accessories of "acid" colors appeared on the market, which immediately fell in love with fashionistas. Many people remember the real squeak of fashion from the 90s - fur elastic. Of course, today such accessories look archaic, but then there was a real "rubber" boom.

Today, the most popular hair accessories are spiral elastic bands, which look like telephone wire. "Spirals" fix the strands well, do not damage the hair. But ... they are so monotonous and almost all girls have them. And sometimes you want something special or the image requires accessories with a "zest". Try making your own rubber band. As a result, you will satisfy your creative impulse and get a one-of-a-kind accessory.

If earlier “home-made products” were created due to a shortage or lack of purchasing opportunities, today it is for the sake of satisfying creative impulses, and in order to get something really original.

Elementary Options

If you have never "made" anything, then start with simple options. They can be done in just five minutes. At the same time, they look stylish and original. Provided that you are ready to show imagination. Otherwise, the accessories will turn out with a “naphthalene smell”: ridiculous and outdated.

Fabric "Simple"

What do you need:

• linen elastic about 15 cm in size;
• a piece of matter (take a piece two or even three times the length of the elastic band);
• scissors;
• threads;
• needle;
• pins.

How to do

1. Fold the piece of fabric in half (lengthwise). Poke around the edges with pins.
2. Hem the fabric along the hem by hand. If there sewing machine, you can use it.
3. You will get a tube of fabric - turn it inside out. Sew the two ends together, leaving a small opening.
4. By using safety pin thread an elastic band into the fabric tube. Stitch the ends together. Or just tie it in a knot.
5. Neatly overcast the hole through which the linen elastic was inserted. Accessory is ready!

Rubber can be made from denim, velveteen, suede or a piece of cotton. You can leave it concise, or you can decorate it: an accessory with beads or sequins looks beautiful.

"Eared"

What do you need:

• textile;
• linen gum;
• needle;
• threads;
• scissors;
• pin;
• wire.

How to do:

1. Make a simple fabric elastic, as in the previous instructions.
2. Cut out the "ears" from the fabric. You can make two parts and sew or cut out a solid “ear”, fold in half lengthwise and overcast. Do not sew to the end, leave a small opening.
3. Pass the wire through the "ears". Sweep a hole.
4. Pass the "ears" through the fabric circle. Tie them up. Ready!

By the same principle, you can make a headband with ears or a bandage. "Eared" elastic bands are now popular with teenagers: please your daughter or niece with a trendy accessory.

Schemes are more complicated

For several seasons, knitted elastic bands and “Athens” (gum bands for creating hairstyles, like a Greek goddess) have been in trend. To make them, you need to work hard, but the result is worth it.

Crochet

What do you need:

• simple gum as a base;
• hook;
• shiny (or other choice) yarn;
• beads, beads.

How to do

1. Tie the base with a single crochet, the second row with a double crochet.
2. Decorate the yarn accessory with beads: they are strung in the course of knitting or sewn on.

The openwork accessory looks beautiful. You can use any pattern for knitting napkins. Needlewomen will be able to tie a simple elastic band in just ten minutes.

Wicker "Afinka"

What do you need:

• centimeter;
• old elastic T-shirt;
• scotch;
• thread, needle;
• scissors.

How to do

1. Measure the circumference of your head in centimetres. Measure in the place where you plan to wear the accessory (“Athens” are worn on the forehead, in the middle of the head).
2. cut out old t-shirt five identical stripes. The width of the parts is approximately 2 cm, the length is equal to the circumference you measured.
3. Collect the strips in one bundle, fasten with a knot at the end.
4. Stick the base with adhesive tape to any surface. This is necessary for the convenience of work.
5. Braid the stripes into a pigtail. At the end is a knot.
6. Keep in mind that the finished pigtail is half the size of the strips.
7. You need to sew the edges with a strip cut from the T-shirt. You can “finish” the pigtail with a regular underwear elastic: it will be located at the back, and greek hairstyle suggests that the back of the "Athina" is covered with hair.

"Athena" can be done in different ways. The easiest option is to sew a lace ribbon and a linen elastic band. The only difficulty is that you need to take measurements correctly: others should see only the delicate lace on the hair. Of course, this option is only suitable if you plan to wrap the strands around the "athen" and not wear the accessory over your hair.

3 children's accessories

Moms of girls definitely know how to do hairstyles. All these pigtails, ponytails, "Malvinkas" are a joy for little princesses. To make a baby's hair, you need to stock up on rubber bands. In stores you can find so many accessories that your eyes just run up. However, homemade is always unique. And it’s much more pleasant to give it to your daughter than a purchased one: so much love has been invested in it. A baby can also be involved in the creation of elastic bands: spending time together will bring a lot of pleasure. How to sew an elastic band from satin or velvet?

With satin ribbon bow

What do you need:

• ribbon;
• scissors;
• glue gun;
• stapler;
• thread;
• needle;
• beads;
• regular gum.

How to do

1. Cut pieces of satin ribbons of different lengths.
2. Roll the resulting pieces into rings. Glue the ends with a glue gun. You can sew.
3. Staple the rings together with a stapler, forming a lush multi-layered bow.
4. Cut off a piece of ribbon and make a fake knot in the middle. Decorate it with beads.
5. Sew a beautiful element to a regular elastic band: you will surely find it among your accessories. If there is no base, you can replace it with a linen elastic sheathed in fabric.

Another option for a festive accessory is an elastic band in the form of a flower, made of fabric using the Japanese kanzashi technique. If you are not familiar with her, then it is better to pre-watch the training video, practice, and then invite the baby to help with the creative process.

With a foamiran rose

What do you need:

• foamiran (special material for needlework);
• oil paint;
• sponge;
• lighter;
• foil;
• glue gun;
• rubber.

How to do

1. Make a pattern: draw the petals of a future rose on paper. Patterns are shared on the thematic sites of the craftswoman, which will simplify the task if you are making a flower from foamiran for the first time.
2. Cut out blanks from the material and paint over them.
3. Fold the flower petal to petal, twist and rub. This is necessary to thin the blanks.
4. Straighten the flowers. Use a lighter to make folds on the petals.
5. We fold the rose. To do this, you need to twist the foil ball, put it in the middle of the workpiece, and then twist the petals around it and fix them with a glue gun. You can make a dense bud, or you can make a full-blown rose.
6. When the flower is ready, fix the green backing at the bottom with a glue gun and glue the elastic.

Foamiran flowers look beautiful on the headbands. They are worn not only by babies, but also by young girls.

With felt figures

What do you need:

• multi-colored felt;
• scissors;
• thread;
• needle;
• beads;
• rubber bands for the base.

How to do

1. Think about what will decorate the gum. The easiest way is to make a nesting doll, a bird, an apple.
2. Cut out the silhouette of the figurine and details from the felt.
3. Overcast the figure, sew the details. Make nesting doll or bird eyes with beads. Beads can also be used simply to add brightness to an accessory.
4. Sew a felt figure onto the base.

Schoolgirls are unlikely to appreciate the felt funny figures on the accessory - they are too much for kids. But you can also come up with options for young fashionistas: make a felt flower or simply cut a circle out of the material, sew it to the base and decorate it with different “sequins”.

And one more life hack: if it seems to you that you can’t master the process of creating an elastic band, but you want to diversify the image with an original hairstyle, cut ... a sock. By cutting off the sock in the heel area and twisting it into a tight roller, you will get an accessory for creating a bun (a homemade “donut”). This hairstyle is adored by schoolgirls, urban fashionistas, stars, and ladies of Balzac age.

How to make an elastic band for hair? This question is often asked by girls with long hair. A variety of elastic bands are able to modify the hairstyle, they can be chosen both for everyday outfit and for an evening out. There are options for little girls and schoolgirls, and there are original products for adult ladies.

Our article is about do-it-yourself hair. The basis of any product is a purchased simple elastic band without any decorations and decorate it depending on the wishes, the chosen color and style. You can wrap the elastic completely with fabric, or you can only add a central decorative element made of fabric, ribbons or lace. Often a bright brooch or button, beads or rhinestones are sewn into the middle. Consider a few interesting ideas how to make hair tie different ways.

Elastic band on a felt basis

This option is suitable for beginner craftsmen, since making such a craft is quite simple. As a basis, take a small circle cut out of felt. In this case, we see that in the sample in the photo below, we used yellow. To decorate the gum, you need to prepare many identical pieces of pink ribbon, a package of small decorative lace flowers, beads to decorate the middle and a fluffy pompom white color.

The decoration of the product begins with the attachment of pieces of tape bent with loops. First, the edges of the tape must be melted with a candle or a lighter so that the threads at the edges do not subsequently fall off. You can grab the loops with stitches to the base of felt or glue with a glue gun. The next step is to place the flowers close to each other along the inner circumference so that the ends of the ribbon are not visible. It remains to glue half beads at an equal distance or sew on round beads (you can use rhinestones or pebbles, beads or other decorative material) and set a fluffy ball in the very middle. When everything is ready, sew the craft on an elastic band from the back.

Contrasting bow

Before you make your own scrunchie, think about what color ribbons you will need so that the product is in harmony with clothes and accessories. To make such beautiful bow, as in the photo below, you need to buy a wide and narrow ribbon in light chocolate color and white organza. To connect all the layers of the craft, a beige button was used, on which you can glue a bright crown with rhinestones.

Start work on wide ribbon. Do not cut off the segment immediately, so as not to be mistaken. It is better to first fold the bow, consisting of several turns, leaving small beveled edges at the beginning of the work and at the end. Melt them immediately so that the cut sides look neat and the threads do not fall off when using an elastic band. At the central point, make a few stitches with threads matched to match, thereby fixing the bow.

The next step is to pick up a wide strip of organza, folded in half. To do this, stepping back a little from the edge, stitch the entire length of the fabric with stitches, tighten the thread and sew to the bottom tape. Lastly, a thin ribbon bent with eyelets is attached, and all layers are connected with a decorated button.

Three-layer bows with beads

Before you make a beautiful scrunchie as in the photo below, pick up a wide and thin ribbon in white and medium width with a contrasting pattern. The central holder of all layers is red bright heart.

Long ends are left only for thin tape located on top of two bows. 3 beads are strung on each hanging edge, matched in the same color scheme as the tapes. The edges are tied into tight knots so that the beads do not fall off when moving.

Kanzashi flowers

How to make small hair ties so that they look spectacular? The kanzashi technique will help. This is the manufacture of beautiful floral elements from simple satin ribbons. Flowers consist of 5 identical petals (two white and three red) and two green ribbon leaves. Let's see how to make such elements.

To create a petal, you need to cut squares of white and red. Then each folds in half diagonally. Then a couple of folds are made on each side, collecting the edges in the center. It is most convenient to use tweezers to hold the tissue together. Then trim the lower edge with scissors and melt with a lighter, pressing all the layers with tweezers. One petal is ready! All other details are made in the same way and glued to each other with a glue gun, attaching a small pebble for beauty in the center.

How to make leaves

After making the main flower for the elastic bands for the girl, get to work on the leaves. To do this, you need to fold a green ribbon 10 cm long in half. We leave the bent edge intact, but from one of its corners we draw straight line to the opposite on the other side and cut with scissors as planned. Get a triangle. Again, the cut edges are melted and pressed against each other with tweezers or fingers. Hold a little and they are securely glued together without glue.

It remains only to turn the blank to the other side and attach the leaves under the previously made flower. Here you can use a glue gun to glue the parts together and attach the decoration to the elastic itself.

Bow of kanzashi petals

Now let's look at how to make bow-shaped hair ties from a ribbon. You will need a base to place the finished petals. It is most convenient to cut it out of a sheet of felt, matched to the color satin ribbon. You already know how to make petals using the kanzashi technique. To make this hair band, you will need to make 12 identical elements and attach them to the felt base in the form of two connected triangles.

Between them, place a central brooch with shiny rhinestones and a beautiful bow can be installed on an elastic band.

Craft for a beam

A beautiful elastic band for a daughter to put on a hair bun is made from different elements combined in one composition. These are white flowers in kanzashi technique, and large multi-layered details of contrasting colors. Arrange the assembled elements symmetrically, leaving room for a large bow.

The elastic band looks very impressive due to the combination of different types of petals and fabrics, but all the details look harmoniously together. Beads are selected as additional elements of blue color and large rhinestones.

As you can see, it is not difficult to make a hair band with your own hands from ribbons and fabric. The photographs presented in the article will make it easier to bring the described work to life. Can be mixed and matched different types parts in one product. The main thing is to choose fabrics and decorative elements that look harmonious together, then the finished elastic will turn out beautiful and tasteful. Good luck!

Hi all! My friends, although it is not spring yet on the street, the time is not far off when we will all walk around without hats. It is worth taking care in advance of how your little head will look, especially if you have a very long hair. That is why today we will make hair ties with our own hands!

We will move, so to speak, from the most elementary to something more complicated. In any case, you will definitely cope with all types of these rubber bands, because I will describe in detail how to make each of them.

In fact, there is simply an incredibly huge number of ideas for creating rubber bands (and not only). And almost every one of them can be realized with the help of simple manipulations. In general, I will show you a lot of hair accessories. Sit back, I'll open the door for you to the amazing (actually!) world of hair accessories (no matter how strange it may sound :))

Before you get started, take a look here. Come back when inspired :)

Scrunchie base or the simplest model

In order to make the base, you will need first of all:

• underwear or just a thin elastic band (15-20 cm);
• a piece of fabric (the length is about 2-3 times greater than the length of the elastic band, the width is arbitrary);
• threads in the color of the fabric;
• needle;
• pin;
• scissors.

Take the prepared piece of fabric, fold it in half lengthwise, sew along the edge. Then fold the stitched piece with the holes facing each other and sew along the edge, leaving an opening to turn inside out. Turn out the workpiece.

Now insert the rubber band. Tie it up, sew up the hole. That's all. Such a model can be used as an independent product or as a basis for a more sophisticated elastic band.

DIY hair bands: master classes and photos

How many rubber bands can be made, you simply cannot imagine! Now let's look at the options for elastic bands that can be made without even having serious knowledge in the art of sewing.

Four Variations

To plunge into creativity right away, I suggest you look at these four options for rubber bands. One way or another, you can find each of them in my articles about homemade gifts. At the end of the article, I just give links to those master classes.

In short: bows are made with multiple folds. In the first case, several ribbons are folded, and in the second, the folds are formed from one strip. The flowers are assembled from a heavily gathered ribbon glued to a base circle. In the latter case, a bow is also placed on top.

Here is another version of the bow:

Beautiful and fashionable

I see this model very often now. Want to be the center of attention? Then make this beautiful and catchy hair band. Prepare a piece of fabric, wire, warp and thread with scissors.

Cut out two ovals from the fabric, which are sewn together along the edge, leaving a hole. Put a wire in there. Place the future bow in an elastic band and tie.

elegant

It is not a shame to wear such an accessory for the evening. For it, prepare the base, shiny (optional) yarn, various kinds of beads and a crochet hook (although if the yarn is thick enough, you can handle it with your hands).

The most important thing here is how to tie the base. I don’t know what this type of strapping is called correctly, but it reminded me of a voluminous buttonhole stitch. In the course of weaving, gradually add beads (this can be done later by pulling a thread through the elastic band, gradually stringing them on it).

Children's rubber bands for little girls

A five-leaf flower can be created by a simple operation: take a circle, sweep it along the edge, pull it together and stuff it. At the end, sew up and make a few tightenings from the center.

Such flowers are very fond of attaching to bandages for newborns and, in general, for small children. Take some laps different size, make cuts along the edge of them and burn them. It remains only to fasten in the center with a bead.

Button happiness

Are there a few original buttons that are definitely not useful for clothes, but do not give rest to your creativity? Then let them go! Everything is as easy as shelling pears: take an elastic band, a button and sew one to the other. If the buttons are small and the base is wide, then you can simply make a button decoration.

All sorts of additional decorations are welcome: ribbons, rhinestones, etc.

Lace elastic

An elastic band can be sewn in the same way as the basis for an elastic band, but with one difference: after stitching, the woven blank does not turn out. With the help of lace, a very light and playful look is obtained.

The second option is with lace: this time only a flower is made from this wonderful material, and not the entire elastic band. To do this, it is enough to pick up the lace and sew it in the center, the rest is a matter of decor.

Elastic band "Bow"

An elastic band with a bow can be sewn from absolutely any fabric! I decided to experiment with fur

Below I decided to show you on the diagram how I made the bow. First, you make the base for the elastic band, and then for the bow, take a wide strip of fabric, sew it in half (as well as for the base).

Then sew the ends of the bow, folding the workpiece in half again. Turn the elastic inside out and tie it in the center with a strip of fabric.

It turns out this cuteness:

From the usual cotton fabric will result in the following:

Rubber " Bunny ears»

Somehow I wandered into free master class within the framework of the BiblioTime project (told about it). The topic of the handicraft meeting was rubber bands. But if everyone decorated the cut with beads, then I decided to excel, remembering the “eared” specimens.

Unfortunately, I don’t have photos of that product, but I can tell you about the creation of an elastic band with ears

To make such an elastic band, you will need a pattern:

Again, you need a base for the gum. The ears are tied with a knot around her and a romantic and girlishly gentle image is obtained. What you need for spring

Elastic band "Jack" ("Halloween")

All girls whose curls are longer than with a “boy haircut” like to go with hairstyles more or less often, and here you can’t do without rubber bands. Of course, in the arsenal of every lady there are not a dozen such hair ornaments, but sometimes you want something original and unusual, which is why the question arises of how to make hair ties with your own hands. You will find some interesting ideas in this article.

What are hair ties made of?

The beauty of such an undertaking is that in order to make an elastic band for hair with your own hands, you can use any materials at hand without any restrictions:

• fabrics - leather, felt, satin, cotton, and cuts of any size, because such an ornament does not need much and can be sewn not from one, but from several patches;
• thin inexpensive purchased elastic bands or wire;
• beads, stones, borders and everything else you can think of for decorating jewelry;
• plastic.

Of course, you will also need improvised tools and materials to hold it all together:

• threads;
• needles;
• scissors;
• metal small clips and rivets;
• wire;
• glue.

"Astra Flower"

To make such an elastic band for hair, a thin fabric of any shade will do. The manufacturing process is very simple:

1. Cut a strip 5 cm wide, up to 10-20 cm long (depending on how lush you want to decorate the flower).
2. On one side, cut along the entire length of the strip according to the fringe principle - these will be the petals.
3. Take a needle and thread and collect the entire strip on the thread from the side where there are no cuts.
4. Tighten it so that you get a circle with petals on the outside.
5. Tie the thread and sew the edges of the fabric.
6. In the center, you can insert another of the same strip of this or any other color, or decorate with a bead of a suitable size.
7. On the reverse side, attach a thin elastic band to the flower, with which you will tie the strands. For this purpose, rivets or a small flap of fabric are suitable.

Important! As you can see, there is nothing complicated. As for the color - choose for yourself, but keep in mind that pale blue or pale pink is perfect for blondes, while brunettes can take a richer green or chocolate.

The simplest do-it-yourself velvet gum

A wide velvet elastic band always looks very luxurious, and making it as easy as shelling pears:

1. Take 1 or 2 pieces of velvet fabric of any color. If you took 2 segments, cut out 2 rectangular parts of the same size from them and sew.
2. The width of the rectangles is the width of the decoration, the larger it is, the more magnificent the decoration will be, the length is 25-40 cm, so that you can arrange beautiful assemblies.
3. Pass a strong elastic thread inside, which will gather the fabric in waves and hold the bundle of curls well, and tie it.
4. Sew up the hole.
5. Straighten the decoration.

Important! This option is perfect for everyday wear. If you make the decoration itself less lush and wide, you can additionally decorate it, for example, with a bow. To do this, after sewing the base, cut out a rectangle of velvet, felt or leather. The length of the rectangle is the length of the bow. Gather the part in the center so that folds form on both sides and, in this form, fasten with a rivet on an elastic band.

“Flower of satin ribbons”

This decoration is more suitable for girls and will become a wonderful gift or holiday accessory. To understand how to make such a hair band with your own hands, read the instructions below:

1. Take a pink satin ribbon 2.5 cm wide and use a ruler and a burner to make 5 strips 7 cm long.
2. Do the same with tape. purple hue 5 cm wide, but the length of the strips should be 10 cm.
3. Fold the ribbons of the same color in half and successively sweep all the details onto one thread and tighten so that you get a circle (do this from the side where the edges of the ribbon meet). So we get one circle of petals.
4. Do the same with the ribbons of the second color.
5. Glue one flower to another, and in the middle - a button.
6. On the back of the flower, glue a clip or elastic band that will hold the bundle of strands well.

Rubber band made of plastic

This option homemade decoration for your hair will be a real find for fashionistas, as you can show your imagination without limit and do it every day new model. For this:

1. Take a piece of plastic.
2. Cut out a rectangular part from it and draw any pattern.
3. To fix the paint, cover the top of the pattern with clear varnish - you can also use it for nails. If you want to make the decoration more elegant, even glitter polish is perfect.
4. Wait until it dries, and then glue an elastic band to the plastic on the back, into which you will collect your curls.

Important! If you have time and desire to tinker a little longer, you can cut the plastic itself not with a rectangle, but in the form of a specific figure - a bunny, a cat, a flower, etc.

Stylish elastic band

Leather jewelry looks very solid and stylish when the elastic band covers the hair bundle in several circles. If you just take a strip of skin, it will slide off, while causing constant inconvenience. Therefore, we offer a leather option that will definitely look extraordinary and will firmly hold the curls in a bun:

1. Take a strip of leather - at least 30 cm long.
2. Trim the edges "on the bias".
3. Mark the center of the strip, fasten an ordinary thin hair band with a rivet in this place on one side.

Important! To collect the hair, secure the bun with a thin elastic band, and wrap a leather strip around the bun on top, tie it in a knot. Such decoration will look very original and unusual.

footage

Now you know how to make your own hair tie. Start from the very simple option, try out your design possibilities, and then show your imagination by improving the decor. Surely, after a few trials, you will want to create more interesting and unusual jewelry for creating different hairstyles!

The beauty of such an undertaking is that in order to make an elastic band for hair with your own hands, you can use any materials at hand without any restrictions:

• fabrics - leather, felt, satin, cotton, and cuts of any size, because such an ornament does not need much and can be sewn not from one, but from several patches;
• thin inexpensive purchased elastic bands or wire;
• beads, stones, borders and everything else you can think of for decorating jewelry;
• plastic.

Of course, you will also need improvised tools and materials to hold it all together:

• threads;
• needles;
• scissors;
• metal small clips and rivets;
• wire;
• glue.

original decoration for hair are elastic bands that are made by hand. They will favorably emphasize your hairstyle and allow you to quickly collect curls in a ponytail or braid. Thanks to the detailed master classes in this article, you will learn how to create beautiful hair jewelry.

New is well forgotten old. Rubber bands are becoming more and more popular. It turns out that sewing them is very simple, you just need to carefully follow each step in the instructions.

Prepare the following materials:

• a blank in the form of a simple rubber band;
• a strip of fabric measuring 90 cm by 10 cm;
• needle and thread to match the material.

Progress:

• Fold the piece of fabric lengthwise, right side inward. Take the rubber band in your hands. Grasp the workpiece from the inside with the ends of the material.

• Attach the thread to one of the corners of the strip. Start sewing two opposite cuts, making small stitches at the same time.

• Sew the entire piece of fabric in this way.

• For convenience, wrap the strip in folds along the inside of the elastic band.

• When you have completely sewn the edges of the fabric, secure the thread with a knot.

• Thread through thumb under the material.

• Gradually turn the fabric right side out. At the same time, help yourself with your fingers, but do not pull the workpiece sharply, as the seam may disperse.

• You will get such a base for gum.

• Wrap the edges of the cuts inward and sew with a blind seam.

• That's all, the rubber band for hair from the material is ready!

Another easy material to work with is tape. They have processed edges, which means that the fabric will not disperse along the threads.

Prepare:

• satin ribbons different widths;
• scissors and thick thread;
• decor in the form of a button;
• candle or lighter;
• glue gun;
• regular gum.

Stages of work:

• Cut the widest ribbon to a length of 45 cm. Cut the ribbon at an oblique angle. Now cut each next tape 2 cm shorter. In total, you need to prepare 5 elastic bands.

Advice. To prevent the cuts of the tapes from fraying, process them with a fire or a soldering iron.

• Gather the ribbons together. Arrange them as the width of the fabric decreases. So you will have the widest at the bottom, and the narrowest at the top. Visually mark the middle along the longest strip and put the thread.

Advice. If there is no twine in the color of the ribbons, then use the narrowest ribbon.

• Pull the tapes tight. Tie the thread tightly into several knots.

• Turn the workpiece over to the back, pull the thread and tie the elastic to the central part of the ribbons.

• Glue decor on top. Don't use it too much big size, as it will look out of place on hanging ribbons.

Volumetric hair bands will turn out if they are knitted from thick threads. To create such an original elastic band, you only need a hook and yarn.

• Make the first loop on the thread. To do this, thread the thread through the loop and tighten it.

• Cast on 12 air loops. They will serve as the basis for the entire knitting.

• Pass a braid of thread through the elastic and connect its ends with a simple column.

• dial three air loops, then connect with the main part. Continue tying the elastic with columns. You can choose any other crochet pattern that is convenient for you.

• The first row of work should be done in a circle. In this case, tie the last column together with the first.

• Tie an elastic band along the entire length in a similar way.

• Finish work when knit to the first row. Tie the edges together, make a knot and cut the thread.

• No one will have such a rubber band!

If you do not know how to knit or sew, then the following instructions for creating hair ties are just for you. The basis for decoration will be chenille wire. It is often used to decorate bouquets.

• fluffy pink and green wire;
• workpiece - gum.

Master Class:

• Take six pink blanks. Pass them through the elastic, gather them together.

• In the central part of the wire, make one turn around the axis. So you fix the decor on the elastic.

• Now begin to bend the ends of the wire in a spiral.

• Twist it all the way to the center of the knot.

• Prepare all other parts in this way. Twist the wire gradually and the one that is located nearby.

• As a result, you will get such a blank with round petals.

• Form a rosebud. To do this, straighten the wire in a circle and slightly at an angle to the middle of the flower.

• For leaves, use green wire. Screw it on the back of the bud.

• Twist the two ends in the same way as the petals.

• The original gum fluffy wire ready!

Thanks to such detailed master classes, you can make your own hair jewelry. Most importantly, follow each step in the instructions.

Modern needlewomen make such skillful jewelry that one can only be surprised. They are able to make a hair ornament that will emphasize the beauty of the hairstyle, in a few different techniques. Satin ribbons for elastic bands are considered a convenient material, because you can create from them from a flower to a decoration for a beam using simple techniques.

Craftswomen are able to make rubber bands with their own hands from ribbons in several techniques, which, upon careful consideration, become quite simple. The main thing in this business is to learn the basic skills, follow the schemes and master classes and use your imagination to make it happen. beautiful decoration, characterized by individuality and spectacular appearance.

The basis of the manufacture of elastic bands is the technique of weaving, folding and collecting elements into one large pattern. It is better for beginner craftswomen to take basic skills as a basis, learn them, and then start to complicate.

Even simple rubber bands can look spectacular on a girl's hair if they are skillfully decorated. Options for decorating finished products are embroidery, weaving, beads, beads, sequins.

You can try a variety of decoration options to make beautiful decorations.

Rubber bands are made from satin ribbons. different colors and shades, beads, beads, decorative elements.

Of the auxiliary tools, you will need textile glue, scissors, a glue gun, a fire source (lighter candle) and skillful hands. Sometimes craftswomen take a ready-made rubber band bought in a regular store and decorate it in their own way.

A well-known technique for creating elastic bands from satin ribbons is the Japanese art of kanzashi. To make beautiful children's accessory for hair resembling a dahlia or chamomile, girls need to follow the master class:

1. From a satin or silk cut, make 16 square patches 5 * 5 cm in size, run along the edges with a lighter so that the threads do not come out. Repeat for the other color (inner petals).
2. For the outer row of petals, bend each square diagonally, repeat, fire over the corner. For the inner row of petals, the squares are bent diagonally three times.
3. Fold the smaller workpiece inside the large one, glue it.
4. Make 12 single-layer blanks for additional decoration.
5. From thick cardboard cut out 2 circles with a diameter of 3.5 cm and 2.5 cm, glue over with a cloth.
6. Glue each two-layer petal to a large base in a circle. Repeat for the second tier. Glue single-layer petals to a smaller base. Glue 2 bases together.
7. Decorate with beads, glue the resulting flower on a hairpin or crab.

Do-it-yourself rubber bands from satin ribbons, made of material of different widths, are spectacular and voluminous. There is a master class for making an accessory:

1. Cut out a rectangular blank 9 * 16 cm from cardboard, draw horizontal line in the middle. Wrap ribbon around it.
2. Remove the skein without damaging the coils, stitch the middle, pull it off until a bow is formed.
3. Repeat the technology for making a bow from a different material and a narrower ribbon.
4. From a fabric of a contrasting color, cut out pieces of the same length and width as the resulting bow, singe the edges.
5. Collect all the elements on a string.
6. Cut out a cardboard circle, cover with a cloth, sew to the rubber band.
7. Use a glue gun to glue a bow on a circle, decorate with small beads, rhinestones, buttons or pebbles.

To make rubber bands from satin ribbons with your own hands, decorating a bun-bun, girls will need to follow step by step instructions

1. Cut 6 pieces of green ribbon 4 * 2.5 cm into a dome, singe from 2 sides to create a wave - these will be leaves. Bend the bottom edge in two places, glue in the center to get a concave even part.
2. Cut 12 pieces of white ribbon 4*2.5 cm and 5 pieces 3.5*2.5 cm in a semicircle, singe, glue into a droplet.
3. Glue 5 blanks together by overlapping each other, decorate with stamens.
4. Repeat for 14 rose petals from 4.5 x 2.5 cm pieces.
5. Round off the first layer of white details, glue the remaining petals, make the second layer around the circle from pink elements. Glue on the leaves.
6. Make 5 similar blanks.
7. Bend 4 pink segments 10 * 5 in half, glue the ends with a fold, connect with a bow. Repeat for 2 white blanks 9 * 5 cm.
8. Fasten 2 white ribbons 8.5 * 5 cm and pink 9 * 5 cm with a white overlay on the pink layer, form a fold, decorate the bottom with beads. Glue the bow, masking the middle.
9. Glue felt circles with a diameter of 3.5 and 2.5 cm to the back of the bow and flowers, sew all the elements onto the sewn lace elastic. Decorate the bun.

Bow decorations look spectacular on the hair, which can be made by following the instructions:

1. Take 2 ribbons 2.5 and 0.8 cm wide, 1 meter long; 1 ribbon 8 mm wide and 50 cm long.
2. Make 2 cardboard templates in the form of the letter P, 6 and 8 cm in size, cut off the edge of the wide ribbon along the oblique, lay it on a large template so that the cut and 2 folds are from each edge.
3. Fasten the ribbon in the center with pins, sew a “needle forward” seam, assemble, fasten.
4. Repeat for the second bow, sew together, attach a bead in the middle.

Elastic band on a felt basis

This option is suitable for beginner craftsmen, since making such a craft is quite simple. As a basis, take a small circle cut out of felt. In this case, we can see that yellow was used in the sample in the photo below. To decorate the gum, you need to prepare many identical pieces of pink ribbon, a package of small decorative lace flowers, beads to decorate the middle and a fluffy white pompom.

The decoration of the product begins with the attachment of pieces of tape bent with loops. First, the edges of the tape must be melted with a candle or a lighter so that the threads at the edges do not subsequently fall off. You can grab the loops with stitches to the base of felt or glue with a glue gun. The next step is to place the flowers close to each other along the inner circumference so that the ends of the ribbon are not visible.

Do-it-yourself elastic bands from satin ribbons - how to make a beautiful kanzashi decoration step by step with a photo

To make such an elastic band for hair, a thin fabric of any shade will do. The manufacturing process is very simple:

1. Cut a strip 5 cm wide, up to 10-20 cm long (depending on how lush you want to decorate the flower).
2. On one side, cut the strips along the entire length according to the fringe principle - these will be the petals.
3. Take a needle and thread and collect the entire strip on the thread from the side where there are no cuts.
4. Tighten it so that you get a circle with petals on the outside.
5. Tie the thread and sew the edges of the fabric.
6. In the center, you can insert another of the same strip of this or any other color, or decorate with a bead of a suitable size.
7. On the reverse side, attach a thin elastic band to the flower, with which you will tie the strands. For this purpose, rivets or a small flap of fabric are suitable.

This decoration is more suitable for girls and will be a wonderful gift or accessory for the holiday. To understand how to make such a hair band with your own hands, read the instructions below:

1. Take a pink satin ribbon 2.5 cm wide and use a ruler and a burner to make 5 strips 7 cm long.
2. Do the same with a 5 cm wide purple ribbon, but the stripes should be 10 cm long.
3. Fold the ribbons of the same color in half and successively sweep all the details onto one thread and tighten so that you get a circle (do this from the side where the edges of the ribbon meet). So we get one circle of petals.
4. Do the same with the ribbons of the second color.
5. Glue one flower to another, and a button in the middle.
6. On the back of the flower, glue a clip or elastic band that will hold the bundle of strands well.

What styling does not go out of fashion, what can be built with the help of the usual rim (also known as a "hoop") - this is what most of the fair sex is interested in. The headband hairstyle is still in fashion, so it will never cease to be relevant!

What is the use of the bezel:

• 1. Masks imperfections. Didn't have time to wash your hair or were you too lazy? No problem! A voluminous headband will help mask this "flaw" and no one will even see that the hair is not too fresh!
• 2.Versatile and accessible. This accessory is an affordable item if you search well. Therefore, stock up immediately for all occasions: for all the outfits from your wardrobe!
• 3. P suitable for any experiment. With such a decoration, you can put any experiments, something original, yes it will work! For example, you can choose and braid a spikelet hairstyle, and decorate it with this stylish attribute. If you choose a headband with an elastic band, then there are countless variations of hairstyles for any celebration! All you need is time, patience and a desire to build something like that on your head.
• 5. K comfortable. If you have a headband that is made of soft material, then you don't have to worry about it causing discomfort to your head.

DIY ribbon hair band is a great little gift for your daughter. And if your girl is over 9 years old, recommend that she familiarize herself with my master class.

Thanks to detailed master class, you can make a beautiful hair ornament with your own hands.

To create an ornament you will need:

• scrunchy;
• purple cabochon;
• scissors;
• ruler;
• satin ribbons 25 mm wide, purple and lilac;
• thread and needle for handmade;
• glue;
• lighter.

• Work should begin with the manufacture of individual parts. From lilac and purple ribbons, it is necessary to prepare 4 pieces, each 16 cm long.

• Taking one piece of each color in your hands, you should fold their wrong sides together.

• Placing the purple part on top, you need to connect the slices of the double part. It is important not to twist or twist the tape. The result is a long and narrow loop.

• Continuing to hold the aligned sections with your fingers, it is necessary to bend the upper part of the loop, folding the part in half.

• In this state, the part must be secured with a pin. And immediately you need to prepare the second same part, completely repeating each action.

• The resulting two parts should be manually stitched with a regular needle and thread. You need to sew with small stitches, trying to capture all layers of the tape at the same time. In this case, both blanks must be sewn together with one thread, without breaking it.

• Then the resulting line should be pulled tightly, collecting the edge of the tape in small folds. After that, you need to make a few fixed knots with a needle and cut off the excess thread.

• Now, using a lighter, you should carefully and carefully melt the sections of the tapes.

• It turned out half of the bow, now you need to make the second part, completely repeating the previous steps.

• The resulting halves should be joined together, gluing the stitching points of the parts.

• Now the purple ribbon should be twisted into a tube and wrapped with glue around the place where the two halves of the bow are fastened.

• On the wrong side, in the center of the bow, you need to attach the prepared elastic band.

• It remains to add a purple cabochon to the middle of the bow and smooth the edges of the ribbons.

A lush and beautiful bow is ready!

Today I will show you how to make a satin ribbon flower. You can decorate with this flower the same hair band, hairpin, gift wrapping.

To create a rubber band you will need:

• glue gun;
• light pink cabochon;
• scissors;
• scrunchy;
• felt circle;
• satin ribbon with a width not exceeding 25 mm, lilac;
• pink satin ribbon 40 mm wide;
• a lilac-colored satin ribbon with a width of at least 50 mm;
• lighter.

• From a lilac ribbon 5 cm wide, squares with sides of 50 mm should be prepared, in the amount of 18 pieces.

• From a pink ribbon, you need to make squares with a side of 4 cm. You will need 12 pieces of such parts.

• From the narrowest of the prepared tapes, you need to make 11 parts.
• Now you can start creating petals from all kinds of prepared squares. Taking one square, it must be carefully folded into a triangle, bending the part along its diagonal.

• Having placed the fold strip horizontally towards you, you need to tuck one edge to the middle and pinch it with your finger.

• Then you need to repeat the action, but with the second side of the fold.

• The result is a square blank, the two sides of which consist of connected sections. They should be carefully singed with fire so that each layer of the tape is processed and soldered together.

• Carefully repeating each step, it is necessary to process the remaining large lilac squares.

• Then repeat the process with pink details, getting slightly smaller details.

• Particular care must be taken when processing the smallest squares of lilac ribbon. It is important to ensure that the tape does not deform or burn, and the edge remains even.

• Now you can connect the parts into an ornament. First you need to put together large parts. It should be glued by laying them one on top of the other, slightly hiding the singed cut under the fold strip.

• Gradually attaching the petals, it is necessary to form a circle and fasten the first tier of the decoration with the last detail. The result is a circle of 18 large lilac petals.

• Then you need to make a circle of medium-sized pink details. You need to glue them the same way as lilac petals. The result is a circle of 12 parts.

• And only small details remain, from which it is required to make the same circle, but already from 11 petals.

• Now you need to connect together all the prepared circles. You should start with the largest, gradually moving to the smallest. First you need to glue a large lilac circle and pink, combining their centers.

• Then you need to attach a small lilac circle, placing it strictly in the center of the pink circle.
• On the underside of the circles, you need to attach a small circle of felt, which will hide the intersection of the circles and their details.
• In the center of the attached circle, attach the prepared hair tie.

• It remains to complement the front side of the jewelry with a lilac cabochon and correct the folds of the petals.

The decoration is ready and now you know how to make a flower from a satin ribbon! You can watch the video.

Read my tips on what else you can do with ribbons with your own hands.

Give each other gifts on the day of the holiday and just like that for no reason.

Sincerely, Natalya Krasnova.

Making beautiful hair bows with your own hands: 13 types of hair accessories

On this moment long-haired girls are increasingly wondering how to properly sew an elastic band for their hair. In such a situation, women use various devices, including hair ties.

Homemade hair bands will always be distinguished by their originality

Women either buy elastic bands or make them themselves - option 2 is more attractive. An elastic band for hair consists of various improvised materials: fabric, ribbons, knitting threads, etc.

At the moment, women use various ways to create rubber bands - as a result, every girl can sew beautiful hair bands with her own hands.

This material talks about how to make an elastic band for hair, and also discusses popular elastic bands for hair.

When creating the basis of an elastic band for hair, a girl uses the following materials:

When making the base of an elastic band for hair, a woman performs the following actions:

1. threads that match the color of the fabric;
2. a piece of fabric that is 3 times longer than the rubber band, any width;
3. linen rubber band (20 cm);
4. picks up a prepared piece of fabric, folds it lengthwise - in half and stitches its edges;
5. then folds the stitched piece with holes - one on top of the other - and stitches its edges. At the same time, the girl leaves a hole through which she then turns the cut inside out;
6. twists the cut and inserts an elastic band from linen into it;
7. tie a rubber thread and sew up the hole - and the base is ready!

WATCH THE VIDEO INSTRUCTIONS

Nowadays the girls are making different kinds rubber bands.

Many girls love to be the center of attention. In a similar situation, women use fashionable elastic bands for hair.

When creating a fashionable elastic band, a girl performs the following actions:

• the future bow is placed in a rubber thread,
• ties - and an elegant hair product is ready!

When going to a restaurant and other institutions, the girl uses an elegant hair band.

In the manufacture of such a product, a woman uses the following materials:

• inserts the wire into the hole;
• cuts 2 ovals from the fabric, which are then sewn along the edge and leave a hole;
• various beads and crochet hook.

When creating an elegant rubber thread, the main thing is to tie the warp correctly. The result should be a voluminous looped seam.

While weaving, the woman adds beads. Seamstresses also add beads after weaving - in a similar situation, the girls pull a thread through an elastic band and hang beads on it.

In the manufacture of gum "Five-leaf flower" a woman performs the following actions:

• winds a circle around the edge;
• as a result, he sews up the circle and makes, moving from the center, tightening.

Such flowers are fixed on bandages for babies and girls. In such a situation, the girl takes several circles of various sizes, cuts them along the edge and burns them.

At the end, the woman fastens the mugs in the center with a bead - and the five-leaf flower is ready!

If a girl has original buttons available that do not fit the clothes, but they can also be used! In such a situation, a woman takes a rubber thread, a button and sews the rubber band to the button.

If the buttons are small and the base is wide, then the girl makes a beautiful button decor. In such a situation, a woman can use various female devices: ribbons, rhinestones, etc.

When making a rubber thread with lace, a woman follows the same procedure as when creating the basis for an elastic band. However, in this situation there is one difference: after stitching, the girl does not turn the workpiece inside out.

As a result, lace elastic bands give the girl a little playfulness.

A lot of girls saw the cartoon "The Nightmare Before Christmas". The main character of this picture is Jack.

In the manufacture of gum "Jack" the girl uses the following materials:

• standard thin rubber band for hair;
• cosmetic felt-tip pens (for the face);
• other necessary devices.

When creating a rubber band "Jack", a woman performs the following actions:

• attaches accessories and ribbon bows to the hair;
• then he makes Jack's face - a circle of fabric, which the girl fills with padding polyester and paints - and the Jack gum is ready!

To make the gum “Hare ears”, the girl makes a pattern:

• picks up the base for the rubber band;
• ties his ears in a knot around the base - and the rubber band "Hare Ears" is ready! A girl with such an elastic band on her head looks femininely cute in spring.

Photo of other rubber bands with my own hands

In addition to the above home-made products, girls make such rubber bands with their own hands:

• elastic bands for hair.

The elastic band looks very attractive and gives romance to the girl

Also, many funny rubber bands can be made from felt - similar products also decorate girls.

As a result, every woman can independently make this or that hair band - to accomplish a creative feat and significantly transform her appearance.

All materials are provided for review. Before using the recommendations regarding the health of your hair, we recommend that you consult with a specialist. The use of site materials is allowed only with an active hyperlink to the site.

Before you make your own scrunchie, think about what color ribbons you will need so that the product is in harmony with clothes and accessories. To make such a beautiful bow, as in the photo below, you need to buy a wide and narrow ribbon of light chocolate color and white organza. To connect all the layers of the craft, a beige button was used, on which you can glue a bright crown with rhinestones.

Begin work on a wide ribbon. Do not cut off the segment immediately, so as not to be mistaken. It is better to first fold the bow, consisting of several turns, leaving small beveled edges at the beginning of the work and at the end. Melt them immediately so that the cut sides look neat and the threads do not fall off when using an elastic band. At the central point, make a few stitches with threads matched to match, thereby fixing the bow.

The next step is to pick up a wide strip of organza, folded in half. To do this, stepping back a little from the edge, stitch the entire length of the fabric with stitches, tighten the thread and sew to the bottom tape. Lastly, a thin ribbon bent with eyelets is attached, and all layers are connected with a decorated button.

Before you make a beautiful scrunchie as in the photo below, pick up a wide and thin ribbon in white and medium width with a contrasting pattern. The central holder of all layers is a bright red heart.

The long ends are left only on a thin ribbon located on top of two bows. 3 beads are strung on each hanging edge, matched in the same color scheme as the ribbons. The edges are tied into tight knots so that the beads do not fall off when moving.

How to make small hair ties so that they look spectacular? The kanzashi technique will help. This is the manufacture of beautiful floral elements from simple satin ribbons. Flowers consist of 5 identical petals (two white and three red) and two green ribbon leaves. Let's see how to make such elements.

To create a petal, you need to cut squares of white and red. Then each folds in half diagonally. Then a couple of folds are made on each side, collecting the edges in the center. It is most convenient to use tweezers to hold the tissue together. Then trim the lower edge with scissors and melt with a lighter, pressing all the layers with tweezers.

Now let's look at how to make bow-shaped hair ties from a ribbon. You will need a base to place the finished petals. It is most convenient to cut it out of a sheet of felt, matched to the color of the satin ribbon. You already know how to make petals using the kanzashi technique. To make this hair band, you will need to make 12 identical elements and attach them to the felt base in the form of two connected triangles.

Between them, place a central brooch with shiny rhinestones and a beautiful bow can be installed on an elastic band.

The simplest do-it-yourself velvet gum

A wide velvet elastic band always looks very luxurious, and making it as easy as shelling pears:

1. Take 1 or 2 pieces of velvet fabric of any color. If you took 2 segments, cut out 2 rectangular parts of the same size from them and sew.
2. The width of the rectangles is the width of the decoration, the larger it is, the more magnificent the decoration will be, the length is 25-40 cm, so that you can arrange beautiful assemblies.
3. Pass a strong elastic thread inside, which will gather the fabric in waves and hold the bundle of curls well, and tie it.
4. Sew up the hole.
5. Straighten the decoration.

Rubber band made of plastic

This option of homemade jewelry for your hair will be a real find for fashionistas, as you can show your imagination without limit and make a new model every day. For this:

1. Take a piece of plastic.
2. Cut out a rectangular part from it and draw any pattern.
3. To fix the paint, cover the top of the pattern with clear varnish - you can also use it for nails. If you want to make the decoration more elegant, even glitter polish is perfect.
4. Wait until it dries, and then glue an elastic band to the plastic on the back, into which you will collect your curls.

Stylish elastic band

Leather jewelry looks very solid and stylish when the elastic band covers the hair bundle in several circles. If you just take a strip of skin, it will slide off, while causing constant inconvenience. Therefore, we offer a leather option that will definitely look extraordinary and will firmly hold the curls in a bun:

1. Take a strip of leather - at least 30 cm long.
2. Trim the edges "on the bias".
3. Mark the center of the strip, fasten an ordinary thin hair band with a rivet in this place on one side.

Craft for a beam

A beautiful elastic band for a daughter to put on a hair bun is made from different elements combined in one composition. These are white flowers in kanzashi technique, and large multi-layered details of contrasting colors. Arrange the assembled elements symmetrically, leaving room for a large bow.

The elastic band looks very impressive due to the combination of different types of petals and fabrics, but all the details look harmoniously together. Additional elements are blue beads and large rhinestones.

As you can see, it is not difficult to make a hair band with your own hands from ribbons and fabric. The photographs presented in the article will make it easier to bring the described work to life. You can vary and combine different types of parts in one product. The main thing is to choose fabrics and decorative elements that look harmonious together, then the finished elastic will turn out beautiful and tasteful. Good luck!