New Year's crafts from corrugated cardboard do it yourself. We create wonderful crafts from corrugated cardboard with a child
There is hardly a house in which there is no corrugated cardboard. This popular industrial packaging material is perhaps the second most common after plastic. It usually consists of three layers: 2 smooth and one wavy. Recently, crafts made from this affordable material have become extremely common. And this is not surprising, because it is plastic, dense and cheap. You can use ordinary corrugated cardboard left over from the boxes, cutting it into strips, or buy a special color one.
At first glance, it may seem that the possibilities of such material are very limited. However, this is fundamentally wrong. We will tell you which crafts from corrugated cardboard you can do it with your own hands with the children, and we will offer several interesting options creativity for adults.
What will be needed?
The main material for crafts is corrugated cardboard. It is best to cut it into strips of various (required) widths and lengths, if the craft is planned to be voluminous. When you create an application, you first need to make a markup with a simple pencil. Accordingly, you need scissors, a clerical knife.
If the material is not painted, ordinary, then use paints (acrylic, gouache) and brushes. For complex crafts, corrugated cardboard and individual elements from it will need to be connected, so PVA glue or glue gun. In addition, stock up on ribbons, beads, colored paper, a needle and thread. The main technique for working with corrugated cardboard is quilling, i.e. twisting strips into a spiral of various densities and then connecting individual elements into a composition, figures, etc.
Christmas toys
New Year's fireworks rang out, the toys were packed in a box, and in the yard, the snow will begin to melt. And even though now the manufacture of Christmas decorations is not as relevant as a couple of months ago, we still propose to adopt a few interesting ideas. Save them, and next year you will not have to puzzle over what to take to kindergarten or school. The main advantage of such toys is lightness, and the disadvantage is that they cannot be used on the street.
In just 10-15 minutes, a corrugated cardboard Christmas tree can be made, such as in the photo above. The amount of starting material depends on what size you will be making the toy. Don't make the strip too wide. So, for a length of 50 cm, 3-4 cm will be enough. Carefully roll up a strip of cardboard with a roll. Next, fasten it so that it does not turn around, and then stretch it into a cone. Make the barrel from a smaller roll. From the remnants of cardboard, you can make decorations for the Christmas tree or use beads.
Or, for example, make such a wreath, as in the picture, using a combined technique - appliqué and quilling. The main highlight in it is minimalism and simplicity of form: the fewer small details, the more stylish the result is.
cartoon characters
Corrugated paper, cardboard is a very malleable and easy to use, but at the same time textured material. Working with him will be interesting not only for small children, but also for schoolchildren in elementary grades. To do this, you need to complicate the task. Try, for example, to make the characters of a cartoon.
The figure above shows that the craft, among other things, can be adapted to store small things, like a box. The system is the same. From one wide strip about 15 cm wide and 10 cm long, roll up the roll, fasten, glue the bottom. Then make arms and legs in the same way. At the end of the head - a strip of cardboard 1-1.5 wide and 20 cm long (focus on the diameter of the cylinder) twist into a roll and stretch slightly. Glue on the eye beads.
Or you can create a whole composition of figures, like these charming and very popular minions in the photo.
How to make a photo frame out of corrugated cardboard?
Cardboard, which has a high density and strength, can be easily used to make a do-it-yourself photo frame. You need to decide on the size, then cut out the base, and carefully attach the decor to it.
In this case, the photo frame is made in a marine style. Corrugated blue waves of cardboard are decorated with a palm tree, clouds and a boat. The craft is simple and original. You can easily change the photo in it, make new frame a different theme or create a whole series. In the version for the girl, sweets and fruits are used.
Food
Another popular topic for crafts is food. It is corrugated cardboard that will help you to embody the most interesting and unexpected ideas. With your own hands, from a minimum amount of materials, you can create a table with the most exquisite dishes, unfortunately, inedible, but very beautiful. This idea can be used at various competitions, performances at school or kindergarten.
The easiest option is rolls. The craft will take a minimum amount of time. All you need is a few strips of multi-colored corrugated cardboard 1-1.5 wide and 5-6 cm long. This will be the filling. Roll them into rolls and fasten. Make a rice layer from a strip 1.5-2 wide and 10-15 cm long, glue it on top in one layer with black cardboard.
In order to create something more original, you will have to make some effort and show imagination. If you do not have colored cardboard on hand, then do not worry, a regular one will do. The absence of color, as you can see, does not interfere with the quality of perception. The design in the photo, consisting of a stand for cakes and pastries on it, seems complicated only at first glance. In this case, the technique is different from quilling. The cardboard is folded into a tube, and crumpled and cut pieces are laid on top in layers. Additional decor is created using thin strips of a wavy layer.
Caskets and boxes
As mentioned above, corrugated cardboard is initially a durable packaging material. However, it can be used in a more original context than just in the form of boxes. Original boxes for small items, stationery, etc. are obtained from colored cardboard.
They will be especially relevant for girls who are interested in such things. It is enough to come up with the shape of the box, cut out its walls and bottom, fasten them together, and then add a lid. This is the main part of the work. Then the decoration process begins - the most interesting and exciting.
Cardboard logs
Do you have a fireplace but no wood? Maybe you can get by with cardboard? This version of the craft is impossible better fit for sham purposes (staging, skits, etc.). A set of logs of the most diverse sizes and shapes is made quickly and easily. Take the usual industrial cardboard from the boxes. Cut it into strips of various lengths and widths and twist into rolls, and then assemble it as shown in the picture.
Paint the logs on top with paint, the surface is uneven and textured, very similar to real wood.
Cardboard castles and palaces
If your intentions are more serious and firm, and there are inexhaustible supplies of industrial cardboard around, then start building a castle or palace. You might then want to make your Big Ben dream come true in a children's room or the Eiffel Tower.
Start small and dream big. Use unpainted regular corrugated cardboard, and start adding color after the craft is completely ready. Sometimes you don't even need to add anything, natural color and so good enough.
Many parents wonder what to do with their child on a rainy day? Good way pass the time usefully - make crafts from cardboard. I present to your attention the schemes of crafts, which are easily made from cardboard, also with their own hands.
Corrugated cardboard is very convenient for creativity, it is even easier to work with it than with paper, cardboard bends easily, keeps its shape and is much thicker than paper. This cardboard is used in the technique of quilling (twisting paper). Corrugated cardboard crafts created from folded spirals are voluminous, airy and very beautiful. This cardboard is suitable for decoration holiday packages, postcards, frames and photo albums.
We disassemble the packaging schemes for a small gift in the form of a mouse made of cardboard with our own hands
A simple master class for children younger ages. The mouse is suitable as a packaging for a small gift. It is made from colored corrugated cardboard.
We take cardboard of the desired color, draw a triangle on it with an angle down, then draw three more triangles equal to the first one. Two triangles on the sides and one on top, the final drawing should be one large triangle (all sides should be equal). Next, turn our drawing upside down and draw semicircular ears, then take cardboard of a different color and stick it on the ears, level it. We make four holes for attaching the ribbon. We bend along the lines of the triangle, folding the box. We show our imagination for the manufacture of eyes, nose, antennae. You can also make an elegant collar out of cardboard, glue it with paper, cloth or lace.
Master class on creating coasters for hot from unnecessary boxes
Corrugated cardboard crafts are good, namely, from unnecessary boxes that are in every house and are discarded as unnecessary. Do not rush to get rid of such materials, because boxes, namely cardboard, you can make a lot of interesting things. Such entertainment is easy to share with children, it is done simply and quickly.
We will need a box, a stationery knife, compasses, glue and design elements (paints, stickers, pencils, fabric). We cut out squares of the same size 2 or 3, depending on the desired size, glue them together, let the glue dry. In the next step, draw two circles with a compass, outer and inner, cut out with a clerical knife. We take the cardboard again and cut out the stand, circle the outside of the early blanks (rings). Next, attach the rings to the stand with PVA glue. When the stand is ready, we move on to the decoupage technique. Usually they use colorful napkins, old playing cards are also suitable. If there is a desire, then the craft can be decorated to your taste. acrylic paints. At the end of the work, varnish the product. Can be used as an original cup holder, also turned over and used as a hot stand.
We make a voluminous tiger cub from corrugated cardboard with our own hands
Let's move on to the most interesting. 3D figures made of cardboard will not leave any child indifferent. I present to your attention MK for the manufacture of a tiger cub.
We take orange corrugated cardboard and black, cut 2 strips, about 0.8 cm in diameter. We need 2 whole strips, 2 cut in half. We take half of the orange strip, half of the black one, the whole orange and the whole black, glue together. We twist this strip to form a round disk, glue the tip. We bend our fingers, form a hemisphere. We do the second part in the same way. It turned out two hemispheres, do it carefully so that they are the same, coat the insides with glue so that the part does not develop in the future. We glue the ball out of them, mask the junction with a black strip. The base for the head is ready. Next, we take yellow cardboard, cut out a strip with a diameter of 0.5 cm, you will need one whole strip and a half, twist the oval and give it a slightly convex shape. From the half of the segment we twist two small disks for the ears, press them slightly from the side to attach to the head.
We glue the muzzle, adding eyes, nose, mustache and eyebrows. Let's move on to the body. We cut 3 black strips and 2 orange, glue them, alternating colors, twist into a disk. We form a cone, lubricating with glue from the inside. Paws, we twist two ovals from orange cardboard, give it the shape of a drop, glue a yellow strip in two turns. We twist small fingers in the form of droplets, three pieces, attach to the paw from above. Upper paws, we make cones from orange stripes, twist the yellow stripes into a disk, giving a slightly convex shape. We fasten an orange cone with a yellow disk, glue it with black stripes on the outside. So, the last part of the tiger is the tail. We make a long oval, smearing the strip with glue, press the middle of the oval, giving it a curved shape. Decorate with black stripes across. We glue all the details together, admire the result.
Get strong and durable. Therefore, they are often used in the manufacture of toys for children. You can take into work the usual packaging material that remained after the acquisition of some big equipment- TV, gas stove, refrigerator, etc. It is convenient to make such recycled materials big cars, houses for dolls.
But bright colored sheets of corrugated cardboard are also on sale. Of these, you can make the most different toys or decor items. Let's look at several options for making corrugated cardboard crafts. In the article we will describe in detail how to make them, what is needed for this.
Beads for mom on March 8
You can twist beads from colored cardboard different color and size. Even cylinders are formed from simple strips, and if you cut a strip of cardboard with a sharp edge, the skein will turn out to be spiral, as in the photo in the article.
In the manufacture of beads, the strips are fastened with PVA glue. For twisting the hanks, a base is used - a wooden skewer or a metal knitting needle. After complete drying of the corrugated cardboard craft, an even hole remains inside, into which a nylon thread or fishing line is inserted. You can attach a chain that has a clasp. To make the beads shine beautifully, they can be covered with a layer of acrylic varnish.
greeting card
When using corrugated cardboard in the creation of postcards, the product turns out to be voluminous and embossed. Take, for example, such a wonderful owl. On a sheet of cardboard folded in half, a bright strip of printed paper is first glued. The drawing can be anything - circles, hearts, balls, etc. An owl's body and two small wings are cut out of corrugated cardboard.
The rest of the details are even, cut out of durable glossy paper. Large white circles are the eyes of a bird, paws, beak and pupils of the eyes are cut out of black paper. Using the same print, cut out a heart. Such simple craft made of corrugated cardboard looks very stylish and impressive.
wall panel
From a large piece of corrugated cardboard, you can cut out such a autumn tree. Additionally, you can use multi-colored buttons or leaves cut out of colored paper or felt. Do-it-yourself corrugated cardboard crafts are cut out carefully, because you only need to remove a thin part of a three-layer cardboard. The wavy inner detail should not be touched by the edge of the blade, as the picture will turn out to be sloppy.
Before cutting, the contours of the drawing are applied with a thin simple pencil. Then, a sharp cutter is drawn along the drawn lines, it is advisable to choose an inclined blade. You can use a utility knife. Then it remains only to decorate the craft with buttons. Choose items of different colors and sizes.
Craft "Fish"
For such crafts for children, corrugated cardboard is taken the most common, you can use the old box from the packaging. First, the shape of the fish is drawn with a simple pencil with a tail and fins. Then the same scales are cut out. The head is separated from the body of the fish by long, curved strips of cardboard. Glue the scales, starting from the tail. The circles are overlapped. Three strips of a thin piece of cardboard are glued on the tail.
The eye is made voluminous due to the layering. Cut out three circles different size and paste them in descending order. First the largest circle, then the medium size, at the end - the smallest. When the craft is done, you can make it bright by painting it with gouache paints. Cover the product several times, as corrugated cardboard absorbs water well. After complete drying, the craft is additionally opened acrylic varnish. After that, it will look shiny, and the colors will become more saturated.
Gift for dad on February 23
Before you make a corrugated cardboard tank craft, you need to remove an even layer. We only need a wavy piece of cardboard to work with. First, four wide strips are cut. They roll into cylinders. These will be the wheels of the tank. They are fastened together with PVA glue, additionally restrained by tank tracks. They are made from thin strips that are wrapped around the wheels several times.
The bottom part of the craft is ready! Now we proceed to the tank turret. A wide strip is cut out of cardboard, and the tower is twisted. The sides are sealed with even plates cut to the size of the sides. From a thin strip you need to roll the hatch. It remains only to make a hole in the front of the tower and insert a long thin cannon. At the end of it, a thickening is made. The tank can be painted after manufacturing bright colors and open with acrylic varnish.
funny monkeys
The monkeys are made from thinly sliced strips using the quilling technique. How to make such crafts from corrugated cardboard step by step, read further in the article. The head and body of the animal are twisted from brown stripes. As a basis for winding, you can take a wooden skewer, in which a slot is cut with a knife. The edge of the paper is inserted into it and rotational movements around the stick begin. When the required thickness of the part is reached, the edge is cut off and attached to the last turn with PVA glue.
When the biggest parts are done, work begins on the smaller parts. For the muzzle, a thin yellow strip is used, from which a circle is twisted. The ears are made up of two colors. The paws are represented only by long strips folded in half. Nose, eyes, mouth are made of colored paper with appliqué. The hair is collected from yellow yarn and glued on top of the head with PVA glue.
Cardboard turkey
To complete the work, you will need colored corrugated cardboard. The head and body of a turkey are twisted from strips of red and Brown. A luxurious tail is assembled from rounded wide stripes of white, red and brown. They are glued on the back of the body at one point. The stripes themselves diverge to the sides like the rays of the sun.
A strip of orange paper twisted into an oval is attached to the front of the head. Eyes can be cut out of colored paper, or you can take purchased ones, as in the photo above. At the end, paws and a hat are created.
The article gives several options for corrugated cardboard crafts made with and for children. Try to create your own masterpiece. Good luck!
Due to its flexibility and at the same time strength, corrugated cardboard is a very convenient material for crafts. Corrugated board holds its shape perfectly, for which it is valued by paper rolling masters. It is about the technique of making crafts from corrugated cardboard that will be discussed today.
She makes crafts from corrugated cardboard herself and teaches this to children Zhukova Elena. Just think - colored stripes can be twisted in such a way that any character from a fairy tale, or an animal, or a wonderful flower can turn out. Enjoy yourself.
Corrugated Cardboard Crafts: Aristocratic Dog
Elena will tell us how to make such an aristocratic dog out of corrugated cardboard:
To make it, we need :
Corrugated cardboard:
Orange stripes 43 pcs. + 1 strip for gluing joints
Yellow stripes - 4 pcs.
Plum (a hat will be made of them) stripes - 7 pcs.
For its manufacture we need:
thermal gun
eyes
ribbon
good mood
Shall we start?
torso
It is necessary to glue two long strips, each of 6 (7) strips.
1. Count 18 ribs, bend on the 19th and twist two ovals
2. These are the resulting blanks for the torso. The strips were soft this time, so they don’t fit snugly in the middle, but don’t worry, it all sticks together further.
3. Now we give the desired shape to our blanks. The first, for the back, we put forward, we put forward as high as possible, but at the same time we make the back (top) itself flat, we need to glue the neck on it.
4. The second, abdomen, we put forward quite a bit, literally 3-4 rows of strips. The bottom part should be as wide as possible - to glue the paws.
5. We coat both blanks with hot glue. I smear the bottom or bottom of the resulting boats completely, thickly, squeezing them together so that they do not diverge and there are no cracks. And then up the sides - rays - strips of glue.
6. Apply glue to the very edge of one of the blanks and connect the back to the abdomen
7. Glue the joint (place of connection) with a strip
Torso ready
Head
1. We glue two long strips of 3 strips each. Roll up two round pills.
2. We give shape. The back of the head is formed by a hemisphere.
3. For the muzzle, we put forward a cone, bend this cone, form a slightly upturned muzzle
4. Lubricate inside with glue. In the spout on the muzzle, I pour more glue
5. Apply glue to the edge of one of the blanks ...
6. Glue the back of the head and muzzle, glue the joint with a strip
Neck
We prepare two strips of two strips each. We twist two identical tablets, glue them together. Set aside the resulting neck.
Ears
Glue two strips of 2 yellow and 2 orange stripes, report 18, add and twist two ovals
Slightly squeeze on one side and squeeze out a little in the wide part (shape the ears), coat with glue inside
Paws
1. We twist 8 identical tablets, from one strip each. Glue two tablets together. Total - we get 4 legs
2. We twist 4 tablets, each of the two strips is the pads of the paws. (at this stage, I realized that the orange stripes were not enough for me, and I glued the pads from yellow and orange, folded together). Squeeze the paw pads a little - make them a little oval
3. Glue the paws to the pads
In the photo above we see - you need to lubricate the inner sides of the paws to the middle (I have a little less, I tried it on - that's just how it turns out). Now glue the body. Glue the neck in place
and glue the head
Glue the ears in place
Hat
1. To make a crown, you need to twist a tablet of three strips, squeeze out with a deep sphere, smear inside
2. For the fields of the hat, we take 4 strips, cut them in width, from the resulting 8 narrow strips we glue one strip and twist the disk. We push the middle of this disk a little. We coat the recess with hot glue, and PVA - the fields of the hat. Let the PVA glue dry (let's go have some tea, this time is just enough :)
