Nov 20

How to knit a monkey with knitting needles

We owe the symbolism of the upcoming new year 2016 to the Chinese, because thanks to their calendar, once every twelve years we meet the spirit of a new animal in our homes. And this year was no exception! What kind of monkey is she? Each animal has its own character and characteristics, which clearly affects people's lives this year.

The color corresponding to the monkey is red, as the year of the fire monkey is approaching. Therefore, her character is appropriate: she is characterized by variability, irascibility, playfulness, fun and much more. I bring to your attention a very beautiful monkey, a cheerful monkey, which also corresponds to all the qualities listed earlier. Only the color is close to red, a brown monkey, with playful eyes in overalls and a cap.

Knitting density: in a standard pattern of a square with a side of ten centimeters, twenty-six loops for thirty-six rows.

What do we need:

• yarn "Pekhorka. Cool" half cotton, half viscose. There are two hundred and eighty meters in one hundred grams. One tangle chocolate color, one ball of milky color, the remains of green yarn
• decorative eyes
• spokes number three
• scissors
• synthetic winterizer or any convenient and familiar filler for work
• hook number three
• tape measure
• decorations or decorations of a knitted monkey, I have a jumpsuit and a hat
• pattern

Main pattern: the front surface, in which all front loops are knitted in the front row, and in the back row we perform purl loops.

torso

One piece is required. To begin with, on knitting needles number three, we collect twelve loops with a chocolate-colored thread and knit two rows with the main pattern.

Third row : we start the additions as follows: we knit a loop behind the front wall, and then behind the back wall to the end of the row, thus getting twenty-four loops.

Fourth row: we knit without changes with the main pattern.

Fifth row: again you need to add twelve loops in a row. We do it this way: we knit the front loop, then the loop behind the front wall, and then behind the back, continue alternating this combination to the end of the row and get thirty-six loops.

Sixth row: and also knit the next two rows stockinette stitch without any changes.

Ninth row: which is the third row of additions, in this row, as in subsequent additional rows, we will again add twelve loops evenly along the knitting. So, having knitted the front loop, we make an increase in the previously known way, then again the front loop, continue to the end of the row and get forty-eight loops.

Tenth row - thirty-first row: knit with the main pattern.

Thirty-second row: form the waistline. To do this, we decrease the loops in the row as follows: we knit one loop of the front, then two loops together, again the front loop, alternate to the end of the row and thirty-six loops remain on the knitting needles.

Thirty-third row - sixtieth row: we do all knitting according to the main pattern, do not forget that in the purl row and loops are appropriate.

Sixty-first row: to form the chest line, we make reductions. Having knitted four front loops in a row, we knit two loops together, then seven front loops in a row, again two loops together with a front loop, two front loops. We repeat this combination twice and complete the row with two facial loops. Thirty-two stitches should remain on the needles at the end of the row.

Sixty-second row: knit with front stitch.

Sixty third row: we start knitting a row with four front rows, then we knit two loops together with an inclination to the left, then five front loops are replaced by knitting two loops together, followed by two front loops. We repeat this combination of loops twice again and at the end of the row follow, one after the other, two facial loops. At the end of the decrease, there were twenty-eight loops in a row.

Sixty-fourth row: knit again with the main pattern.

Sixty-fifth row: after knitting four front loops, we make the first decrease in the row, knitting two loops together, then we knit three front loops in a row, again a decrease in the form of two loops knitted together, then two front loops. Repeat this combination twice and finish the row with two facial loops. So it turns out that twenty-four loops remain in the row.

Sixty-sixth row: again a row without changes in the form of a row of purl loops.

Sixty-seventh row: and this is the fourth decreasing row. We start knitting a row with four front loops, then two loops together, one front loop, then two loops together and two front loops. We repeat all this twice and we knit two facial loops at the end of the row. We get twenty loops.

Sixty-ninth row: final decreasing row. Still starting with four facial loops, then remove one loop, knit two loops together, and then stretch the resulting loop through the removed one. Then follow two loops together and two facial loops. We also repeat this combination twice and complete the row with two facial loops. Thus getting sixteen loops.

Seventy row: We knit all the loops in the row with purl loops. Then we close all the loops, cut the thread.

Head

You need one detail. The beginning is similar to knitting the torso. To begin with, we also collect twelve loops on knitting needles number three with chocolate thread.

First row: We start making additions right away. Having knitted the front loop, we make an increase by knitting the thread first for the front wall, and then for the back wall. We repeat the increase four times in a row, then we knit two front loops and again we increase four times in a row. At the end of the row, we knit one front loop and get twenty loops.

Second row: and subsequent odd rows knit on the main pattern with purl loops.

Third row: one front loop is replaced by a combination of the increase described earlier and the front loop, this combination is repeated four times in a row. Then we knit two front loops and again we repeat the previous combination of increase and front loop four times. At the end of the row, knitting the front loop, we get twenty-eight loops.

Fourth row: and seven more subsequent rows knit with the main pattern.

Twelfth row: we knit six facial loops, then we increase the loop and repeat all this twice. Then we repeat the combination of twelve facial loops and increase twice. Having knitted six facial loops, at the end of the row we get thirty-two loops.

Fourteenth row: we start by knitting six front loops, then we knit a combination of an increase and a front loop, which we repeat twice. Then, having knitted twelve loops, we again repeat the previous combination twice. The end of the row will be six facial loops. Thus, we got thirty-six loops.

Sixteenth row: we already knit seven front loops, then we make an increase and knit two front loops, repeat twice, starting with an increase. We knit twelve loops and alternate twice the increase and two facial loops. At the end of the row, knitting five facial loops, we get forty loops.

Eighteenth row: we start knitting with seven front loops, then we repeat the combination of the increase and three front loops twice. We knit twelve facial loops, repeat the combination with an increase and three facial loops twice. Again at the end of the row there are five front loops, after knitting which we got forty-four loops.

Twentieth row: final incremental row. We knit eight facial loops, repeat twice a series of increases and four facial loops. We knit twelve facial loops and again repeat the alternation of the increase and four facial loops twice. At the end of the row, knitting four facial loops, we get forty-eight loops.

Twenty-second row: the initial row of decreasing loops. Repeat until the end of the row the following combination of loops: one front loop, two loops together, again the front loop. We get thirty-six loops at the end of the row.

Twenty-third row: and we knit the next two rows with the front stitch.

Twenty-sixth row: we knit the front loop and two loops together, and then repeat to the end of the row, thus getting twenty-four loops on the needles.

Twenty-eighth row: repeat until the end of the row of knitting two loops together. We get twelve loops at the end of the row. Bind off all stitches, cut yarn and fasten off.

Face

We knit one piece. On knitting needles number three, we collect ten loops of milky yarn and knit four rows with the main pattern.

Fifth row: we add one loop at the beginning and at the end of the row, knitting the front loop in the first and last loop, first behind the front wall, and then behind the back wall.

Sixth row: and we knit the next two rows with front stitch.

Repeat the last four rows again, that is, from the fifth row to the eighth row inclusive, we get fourteen loops.

muzzle

You will also need one item. We collect thirty-two loops on the knitting needles with a milky thread and knit five rows with the main pattern.

Seventh row: after knitting one front loop, we repeat the combination of one front loop and two loops knitted together, until the last front loop, which we simply knit.

Eighth row: like all odd rows, they consist of purl loops.

Ninth row: we repeat the knitting of one front loop and two loops, which we knit together until the last loop, which we knit with the front loop. Thus, at the end of the row we get twelve loops.

Cut yarn, pull through loops and pull tight.

Ears

Now we need to tie two auricles. On knitting needles number three, we collect seven loops with a light-colored thread and knit two rows with the front stitch.

Third row: we make an increase in each loop until the end of the row, in which you should get twelve loops.

Fourth row - sixth row: knit with the main pattern.

Seventh row - eighth row: knit all stitches.

Ninth row: We knit two loops together with the front loop, to the end of the row. In this row we get seven loops, cut the thread, pass through the loops and tighten, then fasten the thread.

upper limbs

We knit two parts. On knitting needles number three with a chocolate-colored thread, we collect six loops and knit two rows with the main pattern.

Third row: we add at the end and at the beginning of the row one loop at a time, already familiar and described earlier in the way.

Fourth row - sixth row: knit with front stitch. Repeat the last four rows, that is, from the third row to the sixth row, inclusive two more times. We get twelve loops.

Fifteenth row and sixteenth row: Knit all stitches, inc at the beginning of the row, in the middle of the row, and at the end of the row. At the end we get eighteen loops.

Seventeenth row: and also the next eleven rows are performed according to the scheme of the main pattern.

Twenty-ninth row: after knitting six front loops, we repeat twice a series of two loops knitted together and four front loops. And we get sixteen loops. Next, we knit nine rows with the front surface without changes.

Thirty-ninth row: we knit five front loops, and then we repeat the combination of two loops knitted together and three front loops twice, we knit the last loop and we get fourteen loops at the end of the row. This is followed by seven rows of the main pattern.

Next, change the thread and knit two rows with the front stitch. Cast on six stitches at the beginning of the next two rows to form thumb. There should be twenty-six loops. Next, we knit two rows with the front surface. Bind off four sts at the beginning of the next two rows for 18 sts. Then two rows of the main pattern.

We begin to knit the fingers of the hand. We knit two front loops, make one increase, then one front loop and repeat the increase twice. We knit three facial loops and make an increase, then unfold the knitting and knit on these fifteen loops.

Little finger , knitting of which we start from the wrong side, therefore, to begin with, we knit six wrong loops. We unfold the knitting and continue knitting only on six loops. We knit five rows with the main pattern. We cut the thread, pass the end of the thread through the loops on the knitting needle, tighten the loops, fasten the thread.

ring finger for the formation of which we return to the loops on right spoke, which should be nine. We tie a milky-colored thread for work and start knitting from the front loop, then we make one increase in a loop of seven loops on the left knitting needle. Then turn the knitting over and work with this number of loops. In the next row of forming the ring finger, we knit six purl loops, then turn the knitting and work with this number of loops. Knit seven rows with stockinette stitch, then cut the thread, pass its end through all six loops, tighten and fasten off.

Middle finger little different in execution from the rest of the fingers. But to knit it, you need to attach a thread to six loops from the right knitting needle. Next, having knitted one front loop, we make an increase of five loops and we knit the five loops remaining on the left knitting needle. Turn the knitting over and knit only on these loops, which should be nine. In the next row, we knit six purl loops, turn the knitting over and continue to work with only six loops. We knit eight more rows with the main pattern and close the loops, pulling the thread through them, fasten the thread.

For index finger to the existing three loops on the right knitting needle, attach the thread and knit the loops from the left knitting needle, thus obtaining six loops. In the next row, we knit all six loops with purl loops. Next, we work with a given number of loops for eight rows, then we close them, stretching the thread, securing it.

lower limbs

You will need to complete two details. On knitting needles number three with a chocolate-colored thread, we collect sixteen loops. We knit ten rows with the main pattern.

Eleventh row: we begin to add loops to form a beautiful femoral line. To do this, after knitting four front loops, we repeat the combination of the increase and five front loops twice. We get eighteen loops in a row. Knit another nine rows in stockinette stitch.

Twenty-first row: we knit four loops, then alternate twice alternately one increase and six facial loops. There should be twenty stitches in the row. Again we knit nine rows with the main pattern. Thus, adding two loops in every tenth row.

Thirty-first row: after knitting five front loops, we make an increase, then we knit seven front loops, again we increase, we complete the row by knitting the six loops remaining on the knitting needle. It turns out twenty-two loops. Again we knit nine rows with the front stitch.

Forty-first row: we start knitting a row with five front loops, then we increase the loop, we knit eight front loops, repeat the addition of the loop and at the end of the row we knit seven front loops. It turns out twenty-four loops in a row. Then we knit thirteen rows of front and back loops, according to the planned pattern.

Then bind off three loops at the beginning of the next two rows, eighteen loops remain. Next, we do by decreasing one loop at the beginning and at the end of the third row, knitting two loops together. On next row, purl all sts. Then repeat the last two rows three times and get ten loops on the knitting needles. Then we knit two rows, making loops at the beginning and at the end of each row. It turns out six loops, we close all the loops, pulling a thread through them, which we then fasten.

Foot

Steam room detail. On knitting needles number three with a milky thread, we collect fourteen loops, knit two rows with front stitch.

Third row: adding loops. We add a loop, we knit four front loops in a row, we increase again, one front loop and repeat all this twice, getting eighteen loops on the knitting needles. Next, we knit five rows with the main pattern. We collect four loops at the beginning and at the end of the next two rows for knitting the thumb, there should be twenty-six loops. All toes, knit in exactly the same way as the fingers of the hand.

Tail

On knitting needles number three with a chocolate-colored thread, dial ten loops and knit thirty rows. Next, cut the thread, pass through all the loops and tighten tightly, fasten the thread.

Assembling the monkey

All details must be sewn with a mattress seam, performing it with a needle with a thick eye. Or crochet the seams. When making toys, I recommend using a needle, then the seams look more aesthetic and neater.

So, a little about the mattress seam, for those who are not familiar with it.

Lay the two parts you are going to join next to each other so that the places of the future connection are parallel to each other. You need to lay the parts face up. Grab the cross thread between the first and second loop of one of the rows. And on the second part, grab the first and second transverse threads of the product, flash it. Repeat this manipulation, turning the product from the front side to the wrong side and vice versa. All parts must be filled with filler tighter.

Pull the body along the lower loops and sew a seam to the waist, then stuff, continue to sew the edge, gradually stuffing the toy. We begin to sew the head, from top to bottom, gradually stuffing. Next, sew the head to the body, after completing the side seams on the limbs, they should be sewn to the body. Also sew the tail in place. After completing the connection of the main part of the toy, we proceed to its decoration. We sew on the eyes - beads or glue ready-made purchased eyes, do not forget that you need to sew the front part onto the head, on which the eyes and muzzle are attached, which we also fill with filler. We carry out a decorative seam in place of the mouth. Sew the ears to the head. We perform the nose at your discretion, you can designate the nose with a button, bead or other objects.

And you can tie a triangle and fix it on the muzzle as shown in one of the pictures.

Clothes and accessories for your monkey can also be very different, you don’t have to rely on my version, you can knit a monkey - a girl and dress her in an elegant, hand-sewn dress or dress up in an old doll outfit. You can make a black cardboard cylinder and you will have a gallant gentleman. In general, there’s someone who’s into it, as they say, so I don’t post a knitting pattern for an outfit for a monkey. All the best and warm to you in the new year! Let your monkey be the most cheerful and cheerful. Good luck in everything!

In contact with

»

Knitting magazine Little Diana special issue №2 2016

Very cute crocheted monkey.

Now it has become a tradition to give souvenirs for each new year - symbols of the coming year.

And by the New 2016, we all knitted monkeys with great pleasure. But after all, such a knitted toy can be presented in any year and for any celebration.

And you and I can be said to be lucky. Well, I mean someone who loves to knit toys.

Victoria Samborskaya prepared a master class on knitting a little monkey. Her so cute. Well, why not a gift for the new year, for a birthday?

I think kids will love this gift. After all, they themselves are like little monkeys. Yes, and adults will not mind getting such a cunning knitted monkey.

Do you agree?

Then we take note that there is one that will only be "FOR" if you tie it.

And so what do we need to knit this cute toy?

• yarn of two colors (for example, brown and light yellow)
• some pink yarn for a bow
• hook (the craftswoman crocheted No. 2)
• sewing needle
• scissors
• filler (fallofiber)
• eye beads
• wire for legs, handles, tail (but you can do without it)

And we can also connect Mishka Toptyzhka with you. Master Class

If you recommend my site to your friends and click on the buttons social networks, I will be very grateful to you.
Copyright © Attention! Please use the materials of the site with the link

Master class on making a knitted toy "Monkey"

Fedorova Elvira, student of the 7th "a" class of the BEI HE "Gryazovets boarding school for students with visual impairments"
Supervisor: Rodionova Valentina Valentinovna, educator, BEI HE "Gryazovets boarding school for students with visual impairments"
Description: New Year- a special holiday, with the onset of which hopes for positive changes in life are associated. The symbol of 2016 according to the Eastern (Chinese) calendar is the red (fiery) monkey. So we decided to tie this animal as a gift. After all, knitting is a very exciting and useful activity. And getting a handmade gift is much more pleasant than buying it in a store.
This master class Designed for middle and older children school age, teachers additional education, educators, and just creative people who love to create something special with their own hands.
Purpose: toy-gift for the New Year.
Target: manufacturing new year gift with your own hands.
Educational tasks:
- to fix the crochet technique;
- teach children to knit toys using a knitting pattern.
Development tasks:
- develop creative imagination, attention, artistic taste;
- develop interest in creative work made by hand;
- develop fine motor skills hands and eyeball.
Educational tasks:
- to cultivate interest in arts and crafts.
- cultivate perseverance, accuracy.
- to cultivate the ability to achieve the successful achievement of the goal
Materials needed for work:
- yarn red and white;
- hook 2.5 mm;
- synthetic winterizer;
- scissors;
- glue;
- threads;
- sewing needle;
- plastic eyes.

Rules for safe work with tools
1. The hook must be handled very carefully, do not bring it to the face
2. The hook and other devices must be well polished, they must be stored in special cases and boxes
3. You can not make sudden movements with a hand with a hook in the direction of a person sitting next to you.
4. You can not use rusty needles and pins. Keep needles and pins in a box with a lid.
5. Scissors should lie with closed blades, they should be passed rings forward.

Sanitary and hygienic requirements for knitting
1. The workplace should be well lit, the light should fall on the work from the left side.
2. You should sit straight, touching the back of the chair with your body. The distance from the eyes to the work should be at least 35-40 cm, so that myopia does not develop, particles of the fibers that make up the yarn do not get into the eyes.
3. Before starting and after work, you should wash your hands so that the threads and knitted fabric do not get dirty, and there are no small fibers left on your hands.
4. An unfinished product is best stored wrapped in a cloth or put in a bag.
Progress
Monkey knitting pattern.
Conventions
vp - air loop
ss - connecting column
sc - single crochet
(...) - N times - repeat from bracket to bracket the specified number of times.
In parentheses is the total number of loops in the row.
Head and body:
We start knitting from the top of the head, we finish at the end of the torso.

2 row: increase in each loop (12)

4 row: (2 sc, increase) - 6 times (24)
5 row: (5 sc, increase) - 4 times (28)
6 - 9 row: 28 sc
10 row: (6 sc, increase) - 4 times (32)
11 - 12 row: 32 sc
13 row: (6 sc, decrease) - 4 times (28)
14 row: (5 sc, decrease) - 4 times (24)
15 row: (2 sc, decrease) - 4 times (18)
16 row: (1 sbn, decrease) - 6 times (12).
Stuff your head, give it the necessary shape.
17 row: 12 sc
18 row: increase in each loop (24)

19 - 21 row: 24 sc
22 row: (3 sc, increase) - 6 times (30)
23 - 24 row: 30 sc
25 row: (3 sc, decrease) - 6 times (24)
26 row: (2 sc, decrease) - 6 times (18)
27 row: (1 sc, decrease) - 6 times (12).
Stuff the body, give it the necessary shape.
28 row: (1 sbn, decrease) - 4 times (8)
29 row: (1 sc, decrease) - 4 times (4).
Pull the hole, hide the end of the thread inside the body.
Muzzle:
We knit with white yarn
1 row: 8 ch
2 row: from the second loop from the hook: 7 sc, turn over, 7 sc (14)
3 row: increase, 5 sbn, 2 increases, 5 sbn, increase (18)
4 row: 18 sc
5 row: 3 sbn, ss. We fix the thread, leave a long tail for sewing.
The area around the eyes (2 pcs.):
We knit with white yarn
1 row: 6 sc - in the amigurumi ring (6)
2 row: 3 sc in one loop, 3 sc, 3 sc in one loop, 1 sc (10), sl-st. We fix the thread, leave the tail for sewing.

Ears (4 pieces):
1 row: 6 sc in the amigurumi ring (6)
2 row: 1 ch lift, deploy; (1 sbn, increase) - 2 times; 1 sc, 1 sc (8).
We sew the two parts together with the wrong side inward, tying their edges behind the back loops. You don't need to hit.

Hands (2 pcs.):
We knit with white yarn
1 row: 6 sc in the amigurumi ring (6)

3 - 4 row: 12 sc
5 row: (2 sc, decrease) – 3 times (9)
6 row: decrease, 6 sbn, 1 sbn (change white yarn to body color yarn) (8)
7th row: sl-st, 7 sb (8).
We fill the hand.
8 - 12 row: 8 sb, ss.
We fix the thread, leave the tail for sewing.

Legs (2 pcs.):
We knit with white yarn
1 row: 6 sc in the amigurumi ring (6)
2 row: 2 sc in each loop (12)
3 row: (1 sbn, increase) - 6 times (18)
4 - 6 row: 18 sc
7 row: (decrease, 1 sc) - 4 times, 6 sc (14)
8 row: (decrease, 1 sbn) - 3 times, 4 sbn, 1 sbn (change white yarn to body color yarn) (11)
9 row: decrease, 9 sc (10). We stuff the part, give it a shape.
10 - 14 row: 10 sc, sl-st. We fill the leg to the end, leave the thread for sewing.

Tail:
We knit with white yarn
1 row: 6 sc in the amigurumi ring (6)
2 row: (1 sbn, increase) - 3 times (9)
3 row: increase, 8 sc (10)
4 row: (3 sc, decrease) - 2 times (8)
Change the color of the yarn to the color of the body.
5 row: sl-st, 7 sbn - (8)
6 - 18 row: 8 sbn, ss. To keep the tail in shape, you can insert a wire into it.

Product assembly.
1. Sew on the handles, they are attached to the sides of the body, right under the head.
2. Sew the legs directly to the bottom of the body.

3. Before sewing the muzzle to the head, we embroider the mouth and nostrils on it, stuff it tightly.

4. Sew on the muzzle. The top of the muzzle should be located approximately around the 10th or 11th row.
5. Glue the eyes to the area around the eyes, sew this part to the muzzle.

6. Sew on the ears (between the 8th and 12th rows).

Naughty monkey amigurumi - knitted toy Victoria Mitrofanova. The monkey in the photo is crocheted with YarnArt Jeans yarn. You can use any other yarn of your choice, but in this case, you need to choose a hook that fits the size. The size of the toy itself will also change.

Materials:

1. YarnArt Jeans color 03 (milky)
2. YarnArt Jeans yarn color of your choice as the main one for the monkey
3. Some black cotton thread for eyebrows and mouth
4. Some white felt for the eyes
5. Half beads for eyes 8 mm
6. Filler (holofiber, sintepukh)
7. Hook number 2
8. Long needle
9. Scissors
10. Glue moment crystal

When using the specified materials, the size of the toy is 25 cm.

Crochet amigurumi monkey pattern

Legend:
sc - single crochet
ssn - double crochet
pssn - half-column with a crochet
ss - connecting column
pr - increase
ub - decrease

HEAD

We start knitting with yarn of the main color.

2 row: 6 inc (12)






9 row: (7 sc, inc) * 6 times (54)
10 row: (8 sc, inc) * 6 times (60)
11 row: (9 sc, inc) * 6 times (66)
12 row: (10 sc, inc) * 6 times (72)
13 - 20 row: we knit without changes 72 sc (8 rows)
21 row: knit for! front! loop wall 72 sc. The thread is NOT cut.
22nd row: attach a milky thread and knit 72 sbn for! back! the wall of the loop of the 20th row.
23 - 24 row: continue to knit with a milky thread, knit without changes 72 sc (2 rows)
25 row: (10 sc, dec) * 6 times (66)
26 row: (9 sc, dec) * 6 times (60)
27 row: (8 sc, dec) * 6 times (54)
28 row: (7 sc, dec) * 6 times (48)
29 row: (6 sc, dec) * 6 times (42)
30 row: (5 sc, dec) * 6 times (36)
31 row: (4 sc, dec) * 6 times (30)
We begin to fill the head with filler
32 row: (3 sc, dec) * 6 times (24)
33 row: (2 sc, dec) * 6 times (18)
34 row: (1 sc, dec) * 6 times (12)
Fill your head completely
35 row: dec * 6 times
Pull the hole with a needle, cut the thread and hide

RIM

We return to the place where we knitted with the main color 72 sc for the front walls of the loops and left the thread.
1 row: 72 sc
2 row: 5 sc, dec, 15 sc, dec, 20 sc, dec, 15 sc, dec, 7 sc, dec (67)
3 row: 4 prs, dec, 7 prs, 4 prss, 4 prs, dec, 7 prs, 4 prss, 7 prs, dec, 4 prs, 4 prss, 7 prs, dec, 7 prs (63)
4 row: 5 sc, dec, 2 sc
!Attention!
Rapport: (2 pssn, 1ssn, 1 pss2n, 2 ss2n, 1 pss2n, 1 ssn, 2 pssn)

2 sc, dec, 2 sc, repeat rapport,
5 sc, dec, 5 sc (59)
Next 1 sc, 1 sl-st, close. Leave a long thread for sewing.

Muzzle

We knit with milky yarn.
1 row: 14 + 1 ch
2 row: in the second loop from the hook 13 sc, 3 sc in one loop, 12 sc, pr. (30)
3 row: inc, 12 sc, 3 inc, 12 sc, 2 inc (36)
4 row: 1 sc, inc, 13 sc, inc, (1 sc, inc) * 2 times, 13 sc, inc, 1 sc, inc (42)
5 row: 2 sc, inc, 14 sc, inc, (2 sc, inc) * 2 times, 14 sc, inc, 2 sc, inc (48)
6 row: 3 sc, inc, 15 sc, inc, (3 sc, inc) * 2 times, 15 sc, inc, 3 sc, inc (54)
7 - 10 row: we knit without changes 54 sc (4 rows)
1 ss, close. Leave a long thread for sewing.

EARS(2 parts)

Knit with milky yarn
1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5-6 row: we knit without changes 24 sc (2 rows)
You don't need to fill your ear.

We fold the ear into the bottom. For the loops of both sides we knit 11 sc. Leave a long thread for sewing.

NOSTRILS(2 parts)

Knit with milky yarn
1 row: 4 sc in the amigurumi ring. Do not connect the first and fourth sc!
2 row: ch 1, turn, 2sc, 2 sc in the last loop (5)
3 row: ch 1, turn, 3 sc, 2 sc in the last loop (6)

The nostril should be in the form of a flat triangle.

TUMMY

Knit with milky yarn
1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5th row: 1 dc, 5 dc, 1 dc, sl-st
Leave the thread for sewing.

HEAD ASSEMBLY
We sew a bezel.

“I sewed the needle back behind the last row of the headband. Captured only 1 sc. I didn’t tighten it too much so that there were no waves along the edge. The places where I knitted ss2n were slightly pulled to the center. This makes it more expressive.

I put the filler in the muzzle. We arrange it as follows. The upper part of the muzzle should cover the place where we closed the loops of the head. The rest - right, left and bottom, should be in contact with the rim. We sew.

Cut out two semicircles from white felt and glue them over the muzzle. Glue half beads on top. I have them 8 mm. Glue I use "Moment Crystal".

Now sew on the nostrils. These little triangles need to be centered on top of the muzzle. They should almost touch one of the sides and form small tunnels.

We sew the ears on the sides of the muzzle, placing them in a semicircle.

We take a black thread and embroider the eyebrows and mouth.

BODY

We knit with yarn of the main color
1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5 row: (3 sc, inc) * 6 times (30)
6 row: (4 sc, inc) * 6 times (36)
7 row: (5 sc, inc) * 6 times (42)
8 row: (6 sc, inc) * 6 times (48)
9 - 14 row: we knit without changes 48 sc (6 rows)
15 row: (6 sc, dec) * 6 times (42)
16 row: we knit without changes 42 sc
17 row: (5 sc, dec) * 6 times (36)
18 row: we knit without changes 36 sc
19 row: (4 sc, dec) * 6 times (30)
20 row: knit without changes 30 sc
We begin to fill the body with filler
21 row: (3 sc, dec) * 6 times (24)
22 row: we knit without changes 24 sc
23 row: (2 sc, dec) * 6 times (18)
24 - 25 row: we knit without changes 18 sc
1 ss, leave a long thread.
Fill in the rest of the body.

Sew the body to the head.
The seam should not go over the muzzle. Sew on half of the neck, add filler, sew on the rest.
Girls, the head is slightly heavier than the body, so your monkey may already start to flirt, tilting his head a little.
We sew on the belly.

TAIL

We knit with the main color of the yarn.
We fill the tail in the course of knitting. We put a little filler so that the tail is soft and bent.

1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 - 10 row: we knit without changes 12 sc (8 rows)
11th row: dec, 10 sc (11)
12 row: we knit without changes 11 sc
13 row: dec, 9 sc (10)
14 - 33 row: we knit without changes 10 sc (20 rows)
1 ss, leave a long thread for sewing.

PENS(2 parts)

We knit with milky yarn.
We fill the handles in the course of knitting. We put a little filler so that they are soft and bend.
1 row: 6 sc in the amigurumi ring (6)
2 row: inc * 6 times (12)
3 row: (2 sc, inc) * 4 times (16)
4-5 row: knit without changes 16 sc (2 rows)
6 row: 6 sc, dec, 1 sc, dec, 5 sc (14)
7 row: 14 sc (14)
8 row: 5 sc, dec, 1 sc, dec, 4 sc (12)
Change the color to the main color of the monkey yarn
9 - 11 row: we knit without changes 12 sc (3 rows)
12 row: 4 sc, dec, 1 sc, dec, 3 sc (10)
13 - 24 row: we knit without changes 10 sc (12 rows)
We fold the hole in the hitches, we knit 4 sbn. We leave the thread.

LEGS(2 parts)

We knit with the main color of the yarn 4 + 1 ch.
1 row: 3 sc, 3 sc in one loop, 2 sc, inc (10)
2 row: inc, 2 sc, 3 inc, 2 sc, 2 inc (16)
3 row: 1 sc, inc, 3 sc, inc, (1 sc, inc) * 2 times, 3 sc, inc, 1 sc, inc (22)
4 row: 2 sc, inc, 4 sc, inc, (2 sc, inc) * 2 times, 4 sc, inc, 2 sc, inc (28)
5 - 7 row: we knit without changes 28 sc (3 rows)
8 row: 9 sc, (dec, 2 sc) * 2 times, dec, 9 sc (25)
9 row: 9 sc, (dec, 1 sc) * 2 times, dec, 8 sc (22)
10 row: 6 sc, (dec, 1 sc) * 3 times, dec, 5 sc (18)
11 row: 18 sc
We start to fill the leg
12 row: 8 sc, dec, 8 sc (17)
13 row: 17 sc
14th row: 8 sc, dec, 7 sc (16)
15 - 24 row: we knit without changes 16 sc (10 rows)
We fill the legs, leaving a little free space.
We fold the hole in the hits, we knit 7 sbn. Leave the thread for sewing.

ASSEMBLY TOYS
We sew the legs at the level of the center of the belly.
We retreat 2 rows from the head and sew on the handles.
The tail will sit in the center between the legs.

I greet you, dear friends and guests of the blog "We create - we are not lazy." Today on the agenda is another knitted monkey. I called her - Monya, although the toy is more like Alpha, remember this series was about an alien? Unlike, we will knit this monkey with both knitting needles and crochet. In addition, using the example of this toy, we will consider one of the varieties of thread fastening of parts.

This, so to speak, is a soft mount (remember, it was hard)

This thread mount is stronger than. Our monkey can be tortured as you like, and nothing will fall off of it, and this, perhaps, is its main plus.

Toys of this kind are called talkers ... Because their arms and legs dangle freely ...

The introductory part is over - let's get down to business!

Knitted monkey - materials:

• Yarn "Grass" - 50g. (dark beige color)
• Yarn "Blues" - 50g. (beige color to match the grass, but lighter or darker, as you like)
• Hook #2
• Needles №2
• Sintepon
• Bobbin thread to match yarn color (optional)
• Eyes or beads or buttons (also optional ... because you can just embroider)

How to crochet and knit a monkey from fluffy yarn

First, we knit all the details from a smooth thread. Let's start with the most difficult ... Not even so much difficult as dreary))) ...

Knitted monkey - fingers and palms

For fingers - crochet yarn "blues" in a sliding loop 8 sc. Next, in a spiral, we knit 10 rows with single crochets. You need to knit 16 such details (the monkey has 4 limbs - 4 fingers for each).
Next ... we fill each finger, but without fanaticism, so that you can safely connect the edges. We flatten)))
We connect the edge of the first finger of the RLS (we knit 4 columns through, see photo), without coming off we attach the second “flattened” finger to it, also with 4 RLS through and through, and then the third.
Let's start knitting palms

We connected three fingers with one “pigtail” of 12 RLS (4 + 4 + 4 when the fingers were sewn together). Now we will knit with single crochets in a circle using the loops of this chain, and we will make the columns in one part of the chain, as if we were knitting a bootie sole. Additions are not required. there will be 24 columns in total.

We knit 5 rows. To the beginning of the 6th row, we apply the fourth finger and knit it with RLS, piercing three surfaces at once with a hook (two from the finger and one from the palm). We knit 5 more rows in a circle. We fill the part (without fanaticism) and flatten it, connecting the edges of the RLS and knitting them through (see photo) It turns out a palm with fingers. If you did everything right, then when shaking, the fingers will hang out)))
Tie the second palm in the same way, but in the third and fourth there is a slight difference - the fourth finger is not knitted at the beginning of the 6th row, but a little further away. That is, knit 8СБН first, and then knit the fourth finger - you will get palms in a mirror image.

Ears for a knitted monkey

A knitted monkey cannot be without ears)))
I tried to draw a diagram - but something didn’t work out, so I paint:
4 VP + 1 VP lifting. then we knit in a circle in a spiral with columns without a crochet

1 row - 4 sc (in each loop of the chain in a column), + 1sc in the last loop (turn), 4 sc

2 row - 2 sb (increase) in the lifting loop of the lower row, 4 sb, 2 sb (increase), 4 sb

3 row - an increase. increase, 4 sbn, increase, increase, 4 sbn

4 row - 4 increases in a row (2 sb in each loop), 4 sb, 4 increases in a row, 4 sb. should get 24 loops

5-8 rows without increments (24 loops)

9 row - 2 together (decrease), decrease, 8 sc, decrease, decrease, 8 loops = 20 loops

10 row - 20 sc

Tie two parts, fold the edges (do not need to stuff), connect the edges with single crochets (like palms. In the middle, when connecting, make two decreases (optional) 5th and 6th. We knit 7 and 8 together.

monkey muzzle

muzzle first knit by analogy with the ears
8 VP + 1 VP lifting. then we knit in a circle in a spiral with columns without a crochet

1 row - 8 sc (in each loop of the chain in a column), + 1sc in the last loop (turn), 8 sc

2 row - 2 sb (increase) in the lifting loop of the lower row, 8 sb, 2 sb (increase), 8 sb

3 row - an increase. increase, 8 sbn, increase, increase, 8 sbn

4 row - 4 increases in a row (2 sbn in each loop), 8 sbn, 4 increases in a row, 8 sbn.

5 row - * 1 sc. increase * -2 times. * increase, 1 sc * -2 times. 8 sc, * 1 sc. increase * -2 times. * increase, * -2 times. 8 sc, = 40 loops. On these forty loops we knit 4 rows without increases and decreases ...

11 - at the end of the row, knit two loops together

12 - at the end of the row, knit two loops together

13-14 row we tie the whole part in a circle. moreover, in the 13th row at the junction of the muzzle and nose, an increase on both sides of the part.

We knit the shaggy part of the toy with knitting needles ...

Main pattern:
garter stitch (person. rows - front loops, out. rows - front loops)

Front legs (two identical parts)
Type 30 loops on the knitting needles with a “grass” thread. Knit with facial loops, decreasing in each 4th row 5 times, 1 loop at the beginning and end of the row. Next, knit 25 rows on 20 loops with a straight cloth. Then close all loops
Hind legs (two identical parts)
Type 30 loops on the knitting needles with a “grass” thread. Knit with facial loops, decreasing in each 4th row 5 times, 1 loop at the beginning and end of the row. Next, knit 6 rows on 20 loops with a straight cloth. Then cast off all loops.

torso
Type 20 loops on the knitting needles with a “grass” thread.
1-2 p. - persons.p.
3-13 p. - in each odd row we add evenly 4 loops (4-14 without increments) = 44 p.
15-24 p. - no extras
25 - 31 p. - in each odd row we add evenly 3 loops (26-32 without increments) = 56 p.
33-40 p. - straight canvas without additions
41-48 p .- in each row we evenly decrease 7 loops
The part is folded, sewn and stuffed with padding polyester (without fanaticism)

Back of the head (occiput)

Type 10 loops on the knitting needles with a “grass” thread.
1 p. - persons.p. =10
2 p. - kr., increase, * persons, increase *, persons. =19
3 row and further all odd rows - without increments
4 row - kr., * increase, 2 persons *, persons \u003d 28
6 row - kr., * increase, 3 persons *, persons \u003d 37
8 row - kr., *raise, 4 persons *, persons \u003d 46
9 row - exactly ..
attach to the connected smooth muzzle and see if the length of the part is enough around the circumference of the face (should be enough))) the grass is much thicker ... if not, add more loops in the 11th row
10 -20 row without increments

Collecting hands and feet

The arms and legs are assembled in the same way. We look at the pictures and collect ... (just do not forget about the left and right)))
Because for hairy parts, the left and right sides are edentic, then it will be easier for us ...

We put our palms on the hair part and, piercing both parts with a hook, we immediately connect them with single crochets.

Then we turn away the palm of the hairy part not covered by half and, piercing three surfaces with a hook, we immediately connect everything together with RLS, returning to the beginning of the connection. Then, in the same way, we connect the lateral parts of the arm or leg and turn the part inside out.

You can do this with a needle and thread (as you prefer).

We will not stuff either arms or legs ... After all, we want to make a chatterbox toy)))

Therefore, we also sew the edge of the arm, but already on the right side of the part and sew the limbs to the body for this very edge.

We sew "tightly" on both sides of the seam, i.e. go around the entire edge of the arm (or leg) around the perimeter with the needle so that the parts hold tightly.

Shake the workpiece - the arms and legs should dangle)) remember, our knitted monkey is a chatterbox toy?)))

Head

We sew the occipital part at the hairy part of the head (the loops that were cast on and bevels with increments) and sew the muzzle to the opposite side along the circumference crocheted. There will be a non-sewn hole (two edges of the canvas opposite each other, where there were no increases), and through it we make stuffing.
This detail can be stuffed “from the heart”))), but again without fanaticism))) and sew to the body
It remains to sew on the ears in the same likeness as the arms and legs and “draw” the muzzle. With this, I think you can handle it yourself! turns out to be the cutest creature -

knitted monkey from different types yarn

P.S. In my opinion, such a monkey can be presented to anyone))) At least for a holiday, at least just like that))) I have already privatized it)))

I'm giving you this description :) It's not at all difficult to tie a monkey! Let such a knitted monkey become your good toy friend for your children)))