Weaving from rubber bands four-layer fishtail. Weaving from elastic bands on a fork: photo and video lessons

Sets of multi-colored rubber bands Rainbow loom are very popular with both children and adults. This is a great chance to create an original, stylish decoration with your own hands. From the elements of the set, you can create a variety of products, accessories. However, teenagers are interested in how to weave a rubber band bracelet fish tail. Such an ornament can be woven using improvised materials instead of a loom, and using different techniques, contrasting colors, you get an original pattern.

Step-by-step weaving of bracelets from elastic bands "Fishtail" without a loom

"Fishtail" - a technique for weaving ornaments from Rainbow loom rubber bands. To create such a masterpiece, it is not at all necessary to have special devices; there are options in which only rubber bands and fingers are required. As for the skills and experience of weaving, with the help of detailed and simple master classes, video tutorials presented in the article, you can easily start working after viewing the material and create your first masterpiece.

What is the beauty and how to weave a fishtail rubber band bracelet:

• Ease of execution.
• Availability of materials.
• Using variations of the technique, it is possible to obtain a variety of unique decorations.
• The originality of the finished product.
• A unique design can be obtained using the play of colors, weaving elastic bands of various shades, iridescent, glowing in the dark.
• For the decoration of the finished product, decorative elements can be used: figurines, beads, beads, clips.

Weaving on pencils

simple and affordable way weaving is possible using ordinary pencils that are available in every home. For the convenience of work, the structural elements must be glued with adhesive tape, placing an eraser between them. Or just keep the pencils slightly crossed without using additional tools. Work progress:

• One elastic band, twisted in a figure eight, is put on both pencils, the next two do not cross. For getting original design, the colors of the elements should be alternated through one.
• Take the right loop with your fingers, lift it up and throw it over the pencil so that it is on top of the two elastic bands between the weaving tools. Carry out the same manipulation on the left side.
• Put on an elastic band, and lift the lower element and shift the loop between the pencils.

• It is necessary to weave the decoration of the desired length, and then attach the S-shaped clasp on both sides.
• A beautiful accessory woven with pencils is ready.

Watch the video to learn all the intricacies of weaving products on pencils:

Four-layer fork bracelet

When there is no hand necessary tools for weaving rainbow bracelets, ordinary cutlery - forks are suitable. Before proceeding with the actual weaving, it is necessary to prepare the tools. You will need 2 forks, which we fold so that the cloves look in opposite directions. In order for the structure not to fall apart during operation, we glue it with adhesive tape in several places. In addition to the tool, you will need a hook, fasteners, Rainbow loom, it is advisable to choose bright, Beautiful colors, then the decorations will turn out more interesting and beautiful.

Let's start the weaving process:

• We put on an elastic band, twist it with a figure eight, on all the teeth. We connect parallel teeth on two forks with elements of other colors, there is no need to cross them.
• We remove the lower element from the fork on both sides and put it in the center of the work.
• We put an elastic band on one fork and lower it below the rest of the layers. We connect the teeth in parallel, choosing an element of a different shade.
• We put one Rainbow loom on another fork (based on the previous paragraph) and, by analogy with paragraph 3, we attach the rubber bands to the parallel teeth of the forks.
• We raise the lower loops (which connect the two forks) up, shifting them to the middle of the work. There we also transfer a single elastic band, which is worn on only one fork.

• We put on the tool from which the element was removed, a new elastic band, continue to weave, repeating the steps from point 4 until the end of work.
• To complete the process, remove all the loops according to the scheme, leaving one loop on the teeth, which we collect on one peg from one side and the other. We put another elastic band on the teeth, where the elements remained and remove them to the center, and fasten the fastener to the remaining one.

• A chic rainbow bracelet is ready. See photos with examples of finished robots:

To see with your own eyes how the weaving of a four-layer decoration on forks takes place, perhaps by watching the video:

How to make a wrapped bracelet

The "Fishtail" in the shell looks original. It impresses with its uniqueness and the ability to use fantasy and the most unusual color shades. To create such a masterpiece, you will need a hook, forks on which we will work, a clasp, Rainbow loom of different shades. Let's consider the sequence of work:

• Weave the base - a fish tail. We put on one twisted elastic band and 3 even ones on the forks. The lower element is raised from both sides and placed in the middle of the work.
• We put on the next elastic band, and raise the lower one. We weave a classic fishtail with the only difference being that it lifts the loops through the layers.
• When you get an accessory of the desired length, we fix it so that 1 elastic band remains on the fork.
• In order to weave the shell, it is important to follow a few rules: work is done in the opposite direction - the base of the product should always be in the middle between the forks.
• We put the elastic on the forks so that the fishtail is in its middle. Remove the lower element from the fork and place it at the base.

• We put on the next Rainbow loom, and remove the lower one, braiding the main element in this way. It is necessary to continue until the entire product is enclosed in a shell.
• We complete the process by attaching the clasp, the accessory is ready.

Stepping through"fishtail" in the shell look at the video:

Fishtail bracelet inside out

It looks interesting accessory "Fishtail", turned inside out. To weave the product, you will need to choose elastic bands of your favorite colors, prepare a hook and fastener. How to weave a fishtail rubber band bracelet inside out, consider in stages:

• Weaving in this style is possible on various auxiliary tools: loom, fork, pencils, fingers. IN this master class consider the option of weaving on the hands, the thumb and forefinger will be involved here.
• Take an elastic band and twist it, put it on your fingers so that there is 1 loop on each of them. In the same way, put on two more elements.
• Pull the elastic in the middle down so that it is under the bottom.
• Remove the loops of the element that is in the middle.

• We put on another elastic band, but it is not necessary to twist it with a figure eight (as well as subsequent elements).
• We lower the middle element down, and remove the one that turned out to be in the center and shift it to the middle of the work. By analogy, weave an ornament of the desired length.

• To complete, we weave the product according to the scheme, and collect the remaining loops on one finger, fasten the fastener and fasten the second end. Stylish accessory"Fishtail" inside out is ready.

Weaving the Fishtail Inside Out accessory is a fascinating and interesting process, and you can see how it all happens on the video:

How to weave a bracelet on a slingshot

It is easy to weave a silicone rubber bracelet using a slingshot. Additionally, you will need a plastic hook and a clasp. Work progress:

• We put the first twisted elastic band on a slingshot, we stretch the rest even.
• We remove the loop from the right column of the slingshot and place it between the “horns”, by analogy we remove it from the other side.
• We put on the next Rainbow loom, and remove the bottom one. Weave according to the scheme until the required length is reached.
• We fasten the clasp at the end and the decoration is ready.

Watch the video to understand the technique of weaving a rubber band bracelet using a slingshot:

Weave a bracelet on the fingers

The beauty of the fishtail bracelet is that you can weave it with your fingers. Additionally, you will need Rainbow loom rubber bands in three shades, a plastic hook, and an S-shaped clasp. Consider the execution sequence:

• For weaving, two fingers of the left hand (if you are right-handed) are used - middle and index.
• Stretch, twist the rubber band with a figure eight, then put the loop on the index finger, the other on the middle one.
• Put two more elastic bands of different colors on your fingers, but you do not need to twist them.
• With fingers right hand or a special hook, hook the bottom elastic band, remove it first from the middle finger, then from the index finger.

• Next, put the element on your fingers without twisting it, and do the same manipulations with the lower elastic band: remove the last Rainbow loom from one finger, then from the other and place it in the middle. In the same way, weave the accessory to the required length.

• To finish the piece, remove the remaining loops on the hook or fingers and tighten so that two elastic bands remain in the hands. Put on the clasp on one side, then on the other.

In order to appreciate the charm, simplicity of weaving on your fingers, watch the video with a detailed, step-by-step master class:

Video tutorials on weaving bracelets "Fishtail" on the loom

Stylish rainbow loom decorations are very easy to make. For the convenience of weaving, special machines can be used that will facilitate the work in some respects and help create a delightful decoration. If it is difficult to come up with something on your own, the presented master classes and video tutorials will help you to weave real masterpiece, which will complement the image and emphasize your individuality. The presented video tutorials will help to understand the intricacies of weaving, the technique of making an accessory in the style of "fish tail" on a machine and a mini-machine.

It seems to many that it is very difficult to weave wide bracelets from rubber bands. However, this is not always the case. For example, a triple fishtail or fishtail bracelet is quite within the power of a person who has mastered the basic methods of weaving. Therefore, today we will tell you how to weave a triple rubber band bracelet.

Triple bracelet on the loom

A dense, bright and wide fishtail is a must for anyone who practices weaving from rubber bands. For a triple bracelet woven on a loom you will need:

• Machine;
• Hook;
• Rubber bands;
• Clip fastener.

A triple elastic band bracelet can be woven on a loom in just 15 minutes.

Before starting work, it is worth removing the third row of columns so as not to be distracted by them during work. It is also worth redoing the machine so that the near row protrudes slightly forward compared to the far row.

The main work will take place on only 6 columns. The plastic base must be moved so that there is free space under the working columns. After all, we will weave the bracelet down, under the posts.

You will need to choose colors. Usually choose one primary color that goes around the edges. In this case, it is white. There will also be an alternation of three colors.

The rubber bands should be tight enough, because in this case it will be a good test of their strength.

Weaving is quite simple, if you remember the sequence of actions and colors. Always after throwing on the transverse elastic bands, we pull the white (main) on all three columns.

Then remove the lowest white from the outside to the center. Then we remove the lower colored ones from the inside to the center - first from the right columns, then from the left ones.

The video shows this process more clearly.

Weaving a bracelet on forks

Since we only use 6 columns when working, why not try to weave this bracelet on forks? You will need:

• 2 forks;
• Hook;
• Clip fastener;
• Rubber bands - 42 black and 18 pieces of 6 different colors.

Weaving on forks takes about 25 minutes.

First, we throw on three layers of rubber bands, then we throw everything off the forks onto the bottom layer and begin to slowly weave, alternately throwing one layer at a time.

If you want to weave not a triple, but a quadruple fishtail, then you can throw rubber bands not on three cloves (2 teeth in the center are taken as one), but on all four.

This is a great alternative for those who find it easier to work on surebets.

Fishtail on 2 machines

If you want to be original and weave a triple rubber band bracelet according to a different pattern, then you are here! For this weaving you will need:

• 2 machines;
• Hook;
• S-shaped clasp;
• Rubber bands - 25 black, 11 light green and 6 pieces of other colors in 11 shades.

Making a fishtail in this way will be very difficult for beginners, weaving it takes about 15 minutes.

Here we start not with throwing on the main rubber bands, but with throwing colored rubber bands on all the posts, and we do not disassemble the machine.

2 machines are used to make the desired length. Therefore, we attach one to the other, attaching columns of the second to the base of the first.

Then, from above, with a triangle, we stretch the rubber bands of the main color - black. After that, we turn the machine away from us and begin to throw colored colors.

At the end of weaving, we carefully remove all the elastic bands at the beginning and end, fasten them, put on the clasp and remove the entire structure.

Weaving bracelets from elastic bands on a fork- accessible to everyone method of creation original jewelry and handmade gifts. Of course, today you can buy special plastic machines and slingshots, but those items that are at hand every day are of particular interest. A table fork allows you to create very beautiful bracelets and not only simple, but also complex, multi-colored and wide.

In addition to the main tool that you can easily find in the kitchen, do not forget to buy elastic bands of the required color, as well as a hook that makes it easier to work with the material, and also clips with which you can fasten your bracelet.

On forks you can weave various decorations and crafts, even you can do it, although it is much easier to use a special machine for such figured volumetric crafts.

Weaving bracelets from elastic bands on a fork

"Fishtail" is weaving a bracelet from rubber bands on forks, which is popular with novice masters, because it is always easier to learn on the narrowest bracelets, where there is no way to get confused in the sequence of actions.

It is advisable to start by choosing two colors of rubber bands, so you definitely won’t get confused in the execution steps and don’t spend money on a palette of colors, and later you can weave a real “rainbow”.

So, each fork has four cloves, and we will put on the first elastic band by twisting it with a “figure of eight”. The first "ear" on the first two cloves, then twist it and put it on the other two cloves. The cruciform weave then turned out to be exactly in the middle. As a rule, the first ring is always twisted with a “figure eight”, this is the main basis of a durable bracelet.

We turn to the second rubber ring, and put it on the fork, grabbing four cloves, so the two middle ones are in the middle of the ring, and the extreme ones hold the rubber band. Then we also put on the third one.

It's time to remove the first "ears", and for this we always use a hook, although sometimes you can pick it up with your fingers, and someone even assures that it is much easier to work with your fingers. Real craftsmen, and this is exactly what you want to become, always work with a plastic hook, with which you can carefully pick up the rubber band and remove it. First, remove one edge of the lowest one and throw it over two teeth so that it is in the middle. Then we do the same with the second "ear".

Now you can move the structure down a bit to make further steps easier to follow. You also need to put on the next ring, and now you have three elastic bands again, and you need to crochet both edges of the lowest one to the center.

In the same way we will repeat weaving from rubber bands on a fork, video this process will seem very simple to you, and you will definitely try to make such a bracelet with your own hands. And you need to continue until your chain is the right size, after which you can think about how to complete your product and fasten clips or other fasteners.

When your chain is the right size so that it is comfortable to put on your hand, you no longer need to add new rings. Now you have only the last two elastic bands left on the fork, and the edges of the bottom must also be removed in the middle. When you have only two loops left, tied with rubber bands in the middle, they must be crocheted, but not released, but connected together and threaded through the clasp, and hook the other end of the clasp to the beginning. Now the bracelet can be put on your hand.

Weaving from rubber bands on a fork: patterns

To do bright bracelet, which will be full of colors and cheer up, you need to take bright rubber bands and alternate them when weaving. In fact, in order to fulfill weaving from elastic bands on a fork, schemes are not needed, since there is only one algorithm here, which cannot be described schematically by a drawing, it can only be shown in step by step master class or in a video lesson.

The first gum, as always, we will twist with a “figure of eight” and put on the two middle prongs of the fork. The next twisted “eight” is put on two teeth on one side, and the third is put on the other two extreme teeth in the same way.

Now let's move on to the next row, and to make it more clear weaving bracelets from rubber bands on a fork, video you can see. One ring must be doubled and put on the middle two ribs. Next, we crochet the loop of the lower rubber band and throw it over so that it passes through the middle clove. We do the same with the second edge of this rubber band so that it is thrown over the middle clove.

If you do not have a hook at hand, then you can use a toothpick, the sharp end of which is also convenient to throw the loops.

With the next step, again on the middle ribs, we put on the folded elastic in half, and then, as shown earlier, we throw the previous row over the created one. Further the scheme of weaving bracelets from elastic bands on a fork involves alternating one rubber band in the center and two at the edges. Rainbow colors can be achieved if every two rows are done in a different color.

Loops from the outer teeth should always be transferred to the middle ones, and the lowest ones should be transferred to the upper ones. An elastic band is always put on the middle, which must be folded in half, and the loops from the bottom row are removed on top.

At the end of the weaving, you will have two loops that must be folded together and put on a fastener, and then fasten it at the second end (at the very beginning). To align the bracelet, you need to stretch it a little in width and length, so you straighten all the knots, and now your bracelet will look even and neat.

One of the experienced craftswomen notes that on the fork all the patterns are even more accurate than those for which the machine is used.

Weaving rubber bands on a fork: video

complex weaving from rubber bands without a machine on a fork you can also do it, it can be various figures, which then become stylish key rings, but the most popular scheme is, of course, wide bracelet to be woven on two forks. It only seems at first glance that such weaving is very complicated and will take a lot of time, but after the first video lesson you will understand that there are no difficulties, and you will remember the algorithm from the first time, and tomorrow you will teach this technique to your friends.

An original bracelet can be obtained by combining colors correctly, for example, by making smooth transition colors or use only the most trendy colors. For girls, we advise you to take the most trendy colors of this season - purple and lilac, raspberry, pink and pale pink, white. For a bracelet, you will need 18 rubber bands of each color, so, already starting weaving, you know for sure whether you have enough material for this decoration or you need to go to the store in advance to replenish supplies. Indeed, it is possible that you start weaving, but there is not enough material, and then in the store you will not find the elastic bands of the desired color, and the product will be damaged.

The basis for this bracelet will be black rings, they will need 42 pieces. It is advisable to immediately spread the prepared rings into piles of flowers, and then you will no longer waste time choosing desired color from the total mass. It is convenient to use plastic containers for storing multi-colored material, where there will be a separate space for each color, so that before starting the process there will be no need to prepare materials for a long time, but only to get a table fork.

In order to get a beautiful wide weaving from rubber bands on a fork, video tutorials you can watch and draw information from them from real craftswomen. Two forks must be folded so that their cloves look in opposite directions, fixed with tape.

Now we take the first black ring, twist it with a figure eight and put it on the extreme cloves of two opposite forks. The second "eight" of black color on the extreme cloves on the other side, and the third - on the center ones, it turns out that the third "eight" will capture two pairs of cloves at once, which are located opposite each other.

In this case, the “fish tail” will be triple with us, but according to this principle, you can also make a quadruple, if you put on one “eight” for each opposite cloves, then you will have four “eights” in the first row. We will throw another black ring on one fork, on its four cloves.

This was the first row of the base, and then the main construction begins. The first color is purple. Again, we throw three rings on the opposite teeth, this time without twisting, again throw another black ring on four cloves on the front fork. This is followed by the second color row and the third row of your bracelet. Again, you need to throw three colored rings and one more black on one cutlery.

It's time to throw off the bottom ranks. First, hook a black ring with a hook and remove it in the middle from four cloves. Next, you need to remove the three lower “ears” of the figure eight from one fork, and then do the same with the other. When removing the "ears", you need to pay attention so that they do not overlap the horizontal black rubber bands of the base, which must be pulled down so that they are above the rest of the weave of rubber bands.

Weaving from elastic bands without a machine on a fork

If you have already done, then you can use it to create rubber ornaments. And on forks you can always create the most original key chains, figurines, and so on, the main thing is to find a suitable master class.

Other interesting master classes with rubber bands you will find and learn how to weave bracelets on a slingshot and loom. Such decorations are very durable, they can endure any climatic conditions and they do not wear out, but the main thing is that the material is of high quality and durable. Sometimes in the store you can find low-quality rubber goods that will tear in the process of creating a bracelet.

Weaving rubber bands on a fork: video tutorials

How to make a rubber band bracelet using a Dragon Scale Iris Fork

If there is no weaving machine, you can adapt and make such a multi-colored bracelet with a fork. Good luck and write in the comments how you get to weave.
Rubber band bracelets were designed by engineer Cheong Choon Ng for his children. In English, they are called rainbow loom (rainbow - rainbow, loom - loom for weaving). This hobby has become very popular among schoolchildren around the world. In 2013, about 1.3 million machines were sold. In the Russian-speaking Internet, such elastic bands are called "irises". They are good because they help develop mindfulness, perseverance and quick wit in children. This is a serious argument for parents to support such a hobby. Watch, try to weave and do not forget to share the link to our video with your friends.

Elastic bracelet "Four-layer fishtail" (on forks)

Weaving on a fork simple and beautiful bracelet rainbow loom

How to weave bracelets from rubber bands without a loom on a fork. Fish tail bracelet.

Bracelet Triple fishtail, WITHOUT MACHINE, Rainbow Loom Iris

From this video tutorial you will learn how to weave a Triple Fishtail Bracelet WITHOUT a loom from Rainbow Loom elastic bands. We need 2 forks and 18 rubber bands in 6 colors + 42 black rubber bands. Good luck!

Currently, weaving from rubber bands is becoming a very popular type of needlework, even children are starting to do it, because it does not require high costs, and as a result, it quickly turns out to be done beautiful decoration, craft or toy. In this article, you can learn how to weave a triple fishtail pattern bracelet, which is easy to make from rubber bands quickly and easily with your own hands on a loom and on forks!

There are several varieties of fishtail weaving: double, triple and quadruple fishtail. The most common is triple. Its production will be considered further.

The Triple Fishtail rubber band bracelet can be woven from colorful beautiful rainbow and bright elastic bands, it turns out to be dense and wide. This bracelet can be worn by both adults and children.

A beautiful bracelet can serve as a cute and pleasant gift for your loved ones, as it is made by yourself, and you put a piece of yourself into it.

Let's see how such a wonderful bracelet is made.

Let's analyze the manufacture of the Triple Fishtail bracelet from rubber bands on a fork

Not everyone wants to get a weaving loom to try out a bracelet, so you can use what you definitely have at home - forks!

Weaving on forks takes about 30 minutes.

Bracelet Ingredients:

• Forks (2 pieces)
• Hook
• Clip - clasp

How to do:

1. Take two forks and attach them to each other so that their prongs look in different directions.
2. Place three layers of rubber bands over three prongs (two middle prongs appear as one).
3. Drop everything from the forks to the bottom layer.
4. Start weaving with a hook, alternately throwing one layer at a time.
5. Watch the video of the master class.

You will succeed!

Let's learn how to make a Triple Fishtail bracelet on a loom

So, you have decided to start weaving a Triple Fishtail bracelet from rubber bands on a loom, which means you have come to the right place!

First you need to prepare the machine.

How to properly prepare the machine?

To do this, it is necessary to place removable columns of the machine for weaving rubber bands. You will only need two rows of three columns.

Important: Both columns must be at different levels, that is, the left column must be one lower than the right one.

Under the working posts, you need to hide the bottom so that what happens during weaving does not interfere with work.

Your machine should look something like the photo.

Let's move on to weaving the Triple Fishtail bracelet on the loom

You can take rubber bands of any colors, the main thing is that you yourself do not get confused in these colors. For the first time, you can take one color to simply deal with the very technology of weaving rubber bands. If you want to get a picture, then it is recommended to take four colors, one of them should be the base one, it will border the bracelet on the side, and three others.

Bracelet Ingredients:

• Rubber bands (42 side + 108 any other)
• Prepared machine
• Hook
• S - shaped clip-fasteners

Important: during weaving, it is necessary to connect the posts horizontally.

Elastic bands of color 2 - side. Elastic bands of colors 1,3,4 are your fishtail braids.

1. Take the rubber bands of color 1 of the same color and put them on the posts in the shape of a figure of eight. These "eights" should be placed diagonally.
2. On the left columns (which are located one below), one elastic band of color 2 is put on without twisting.
3. On the posts over the elastic bands of color 1, put on the elastic bands of color 3 and color 4 without twisting. It should look like the letter "Sh" with a slope.
4. Now we remove the loops with a hook.
5. Move the elastic band of color 2 to the center of the elastic bands of colors 3 and 4. It turned out that the elastic bands of color 1 are located in a figure eight, and the colors 3 and 4 are pulled in the middle by an elastic band of color 2.
6. put on left side elastic band color 2.
7. Remove color 1 elastic band from each right column.
8. Now the most difficult thing, because you need to hook not from the outside, but put the hook between two lines of color 2, and remove the loops of color 1 from the left edge.
9. The first layer is ready, now you can string the elastic bands of color 1 in the same way, one elastic band of color 2 on one side and remove the elastic bands of color 3.
10. During weaving, the resulting layers will go down, and it will be convenient for you to continue weaving.
11. Repeat the previous steps as many times as needed.

How to finish weaving?

1. So, you have come to the end of weaving and you need to close the loops.
2. On each vertical should be two rubber bands of color 2 and two of any colored rubber bands.
3. Just remove the upper elastic band of color 2 and remove it, and the lower one in the center. We will remove the other lower loops to the center, leaving only the upper ones, of the same color.
4. Let's throw them from the right side to the left and fasten them with S-shaped fasteners.
5. We attach the first layer of rubber bands of color 1 to the other end of the fasteners.

If you follow the instructions, then your woven rubber bracelet will turn out like in any photo or even better!

The bracelet is ready! Wear with pleasure and delight yourself with new crafts.

Watch the master class video for a more accurate understanding of the instructions for weaving the "Triple Fishtail" from rubber bands on the loom.