How to make a rubber band bracelet for beginners. Beautiful rubber bracelets: weaving lessons for beginners

Rubber weaving is the new kind handicrafts.

It appeared quite recently, however, quickly gained popularity among children and adults.

From small multi-colored elastic bands, which are easily purchased at a stationery store or where they sell hairpins, beautiful and bright decorations are easily and quickly obtained:

• bracelets;
• pendants;
• necklace;
• belts;
• rings, etc.

Thanks to a wide range of shades, elastic band accessories are unique, and each needlewoman will be able to find a color scheme to her liking.

Exist various techniques rubber weave:

1. Weaving on the fingers.
2. Weaving on a loom or a small loom.
3. Weaving on a fork.

In these techniques weave like simple patterns, which even a child can handle, and more laborious.

For weaving, in addition to the elastic bands themselves, you will need the following tools:

• hook (take a simple crochet hook No. 3-4 differs from the special one in head size and rounding);
• weaving machine - can be of various modifications with 2 or more rods for fixing elastic bands;
• ordinary table fork;
• rubber bands, they are in bags and a plastic hook comes with them, sometimes with a slingshot - this small machine like the photo below.

The set of tools may vary, depending on the chosen technique. On the Internet, it is now easy to find a huge number of workshops on weaving rubber bands. Many of these lessons are provided detailed descriptions and video instructions in Russian.

Basic weaving pattern

In order to learn how to weave from rubber bands, it is best to start with the simplest basic pattern that does not require special tools. One of these patterns is the chain pattern.

The chain weaving process consists of the following steps:

1. We put on an elastic band twisted in the form of a figure eight on the index and middle fingers;
2. We do not twist the next elastic band, but simply pull it next to the first one;
3. We remove the first elastic band from the fingers, threading it onto the last one;
4. So we continue until the product of the desired length is obtained;
5. At the end of the weave we attach an S-shaped fastener.

Chain weaving tutorial video:

For those who find this pattern very simple, we recommend trying to weave a french braid bracelet, which has detailed video tutorials and step by step photos instructions.
This article will help a beginner cope, as each step is analyzed in detail. It will suit both the owners of the machine and the slingshot, and those who do not have them. The weaving option on the fingers is the simplest, which is why it is described in this article.

For those who want to weave only on the loom, we offer to do it yourself. all the ideas are sorted out, from which you can make a loom for weaving rubber bands. And this: Lego, nails, boards, bolts or screws, an eraser, pencils or chopsticks. Come in and choose the version of the machine that suits you, so that after 30 minutes we can weave any bracelet!

Rubber band flower bracelet

This model of the bracelet is also woven without using a loom. For work you will need:

• pencils - 3 pcs.;
• hook;
• clasp;
• colored rubber bands green-36, orange-12, pink-24, purple-12 and red-7.

Weaving a bracelet with a flower takes place in two stages:

1. Flower making. Weave 6 petals from orange, pink and purple elastic bands. The weaving of flower petals is based on the “chain” pattern discussed above. We connect the petals of the flower, stringing them on a red elastic band and fixing them with green.
2. Making the base of the bracelet. Weave a tourniquet with a pattern " fish tail”, Starting with the first green elastic band of the flower. For such weaving, we put an elastic band twisted into a figure-eight on two pencils, and on top we string two more not twisted. We remove the first elastic band and stretch it through the last two. So weave until the desired length is reached. We connect the ends of the bracelet and fasten them with a clasp.

For more details on the process of making a bracelet with a flower, see the following video tutorial in Russian: >

Bracelet made of elastic bands on the machine

Such original decoration quite easy to do. We will need:

• weaving machine;
• hook;
• elastic bands of two or three colors (imagine a bracelet in what order you want to see it, so spread out the rubber bands);
• clasp.

The first step is to decide on the sequence of colors in the picture. For a sample, lay out the rubber bands in the desired order and refer to it as you work.

1. To start weaving, we will stretch three elastic bands on the adjacent columns of the machine: twist the first elastic band with a figure eight.
2. We put on the next two as is.
3. Next, crochet the bottom elastic band and thread it through the other two.
4. Then we put on one new rubber band, and remove the bottom one in the same way. So we will continue until the end of the work, and then we will connect the ends of the resulting bracelet with a clasp.

The video will teach you how to weave a bracelet from rubber bands on a loom:

Bracelet made of rubber bands on a fork

The iris bracelet is a classic version of weaving on a fork. For work you will need:

• fork;
• elastic bands of all colors of the rainbow;
• thin hook.

1. At the beginning of weaving, we fold the first elastic band in half and, twisting it with a figure eight, we put on the two central cloves of the fork.
2. We pull the next two elastic bands in pairs on the left and right teeth in the same way.
3. Now we remove the initial rubber band, while stretching it from above the central loops. To prevent the rubber bands from slipping, we move the entire canvas down the fork.
4. Then we place the folded in half, but not twisted elastic band on the middle pair of teeth, and remove the previous row on top of it.

Thus, we alternate: an elastic band in the center; elastic bands on the sides. For each color, repeat two or more rows.

To complete the weaving of the product, we throw the loops from the extreme cloves of the fork through the central ones, and then the lower ones through the upper ones. On the remaining 2 loops in the center, we put on the last ring folded in half and stretch the loops through it. It remains to throw one loop over the other and fasten the weaving with a clasp. The bracelet is ready!

The video will teach you how to weave a rubber band bracelet on a fork step by step:

Do not know what you can weave and rubber bands? This one with photos and videos will illustrate in detail different products and options for their creation.
Insects and animals, birds and rings, necklaces and amphibians. How to weave such things and on what: a loom, fingers, without a loom is easy to repeat in a video.

Those who wish to master the technique of weaving volumetric objects, we recommend starting with weaving eggs from rubber bands. The article describes and shows different variants weaving, both without a loom (on forks), and with it.
If you are ready to start right now, then you will find video master classes at this address.

panda rubber band decoration

In addition to bracelets, other accessories are also woven from rubber bands. The next video tutorial details how to weave a keychain in the form funny toy. Weaving a panda keychain requires initial training, so it should be taken after training on simple decorations and with a machine.
If you don’t have one, then how to make a weaving loom using video instructions is described in this article.

The video will help to weave a panda rubber band decoration on the loom:

In this article, a variety of patterns and techniques for weaving rubber products were considered. However, this is only a small part of the whole variety of options. By using different color schemes and applying a creative approach to the process, you can easily master or come up with more complex patterns yourself.

Weaving from rubber bands will be interesting for both teenagers and adult lovers of needlework. In addition, this hobby is exciting and useful for children, contributes to the development of fine motor skills and perseverance.

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Weaving baubles from elastic bands rainbow looms in Lately is gaining more and more popularity. For the first time, these materials for needlework became widespread in 2014, after which almost every child who loves to work with his hands wants to know how to weave bracelets from rubber bands. There are many ways to make stylish baubles, as well as hundreds of weaving patterns.

From the simple ones that even a beginner can handle, to the complex ones that require experience. Below are some photo and video tips for creating beautiful, bright children's bracelets.

Instructions and patterns for weaving bracelets from rubber bands with step by step photos

Weaving methods with the help of elastic bands have been known for a long time, but a big impetus to this direction of needlework was given by the invention of a special machine by the American Chin Chong, who wanted to surprise his daughters. Over time, this product spread throughout school institutions, and the creation of bracelets captivated children: baubles became a kind of symbol of friendship. What is necessary:

• The loom is great for a child with large fingers, it allows even an adult to participate in the process of creating jewelry, weaving with it is easy and pleasant.
• For those who do not have a loom, they came up with many other ways to weave rubber bracelets: using a fork, a plastic slingshot, only with a hook or on your fingers. And although a special device greatly simplifies the process of weaving, baubles made using other devices look no worse. With experience, children learn how to create heart bracelets decorated with flowers, roses, stars, bows. Decorative elements are made according to a strict pattern using a thin hook.
• Elastic bands are used as the main material, although if desired, children can complement the bracelets with beads, ribbons, and other details. You can buy them in special multi-colored sets for weaving rubber bands or rubber rings of the same color in a bag separately.

Thanks to this type of needlework, the child learns to better control his body, develops fine motor skills. Weaving bracelets helps to improve concentration, as a result - better learning. Several master classes with photos will help everyone to weave an interesting bauble in different ways.

On the rainbow machine

• To start, take the first elastic band of your desired color. There can be several shades of the material, it is advisable to start with three. They will have to be alternated. First, put the first silicone ring on two posts: the middle one and the post next to it on the left side.
• Take an elastic band of a different color, put it on the leftmost column, on which there is already one loop, stretch it to the middle column, as shown in the figure. The rubber bands should zigzag on the loom.

• Continue to arrange the materials for the bracelet in the same way, alternating the colors you like.
• Turn the machine so that the arrow points towards you. So, while the bracelet is weaving, it will be easier to pick up the rubber rings.

• Next, work on the pillar closest to you. With the help of a hook, pick up the elastic band from the middle row, which is located below. Pass it through from above, swapping with the adjacent loop.
• Put the removed elastic on the next row, connecting with a figure eight. Repeat the same steps for all lower rubber rings. Weaving while working with the machine should go to the left, regardless of how you turn the tool towards you.

• Tip for beginners: if you are not able to work with a hook at first, do not despair, this technique requires some skill. Over time, the creation of a bracelet will be much faster and more enjoyable. As a result, you should get two rows with colored circles, as shown in the photo.
• To be able to wear a bracelet, attach special S-shaped fasteners on both sides of the future jewelry. They can come with a set of rubber bands or be purchased separately.

• Crochet carefully remove all the loops from the posts of the machine.
• Connect the two ends of the bracelet with a clip. A simple and beautiful bauble is ready! Based on this technique, you can later create original, more complex weaves.

Forks

A fork is a device that can be found in everyone's home. With it, you can create a beautiful, unusual decoration. Place 3 elastic bands on its teeth as follows:

1. Pull the first one over 3 teeth on the left, then twist it with a figure eight, put it on 3 right teeth. On the two middle columns, the loops will intersect.
2. Put the second on 4 teeth, and stretch the back part on 2 medium ones.
3. Put on the third one in the same way as the previous step. See how this weaving turned out in the photo:

• Take the hook. Hook them first with the left loop of the lower elastic band, remove from the fork and thread between the two middle rows. Do the same with the second loop.

• Next, put on the rubber ring in the same way as you did in the first step in the last step: place it on four teeth, stretch the back to the two middle ones. With the help of the hook, continue to pull the loops first from one side, then from the other side - this is how you will weave the fishtail bracelet.
• The length of the baubles requires that the future decoration be periodically removed from the fork. Do this, as shown in the photo, hooking the extreme elastic bands with a hook, then carefully swipe up through the cloves.

• Remove the future bracelet completely.
• Carefully put back only the extreme loops, continue to weave as you did before.

• Hook the fasteners around the edges of the decoration. A beautiful bracelet is ready!

On fingers

• Choose a few elastic bands, contrasting colors - so the bauble will look prettier and brighter. If you wish, you can use monophonic materials. For , use your middle and index fingers: take a rubber ring, twist the eight on them. Put on the next 2 rings without twisting.

• First remove the lower left loop, place it between your fingers, then do this with the right loop. They should be in the middle, as you see in the photo.

• Add the next rubber ring. With the loops that turned out to be the lowest, do the same as the previous step.

• Remember that when you weave a bauble, you should see three elastic bands at the same time. Lift the bottom loops up, release, put on the next elastic band. So continue to weave until you get the desired length of your product.

• If the bracelet comes out uneven, don't worry. After the end of production, baubles take the necessary shape.

• When you have woven the jewelry to the desired length, leave 2 loops, do not wear the next one. Carefully remove them from your fingers. You will need a clasp to secure the sides.

• A beautiful, multi-colored bauble is ready!

With a hook

• If you have a hook, elastic bands, but you cannot weave a bauble exclusively on your fingers, use this method. First, fold the 2 rings of elastic into a figure-eight.
• Next, squeeze them tightly between your thumb and forefinger. So that not twisted edges are free.
• Slide the tool under the loose rubber rings.
• Hook the elastic band with the edge of the hook, stretch it so that it is located approximately in the middle between the free rings squeezed between the fingers. Be careful not to pull too hard, otherwise there is a risk that the material will fall out of your hands.

• Move your fingers a little closer to the new rubber bands, intercept them.
• Thread the hook again as in step number 3.
• Pass the next elastic band in a contrasting color. Continue like this until you get the desired length of your product. It can be a finger ring or a bracelet.
• Secure the ends with clasps. The work is finished!

Using a slingshot

• perform as follows: take a slingshot, put 3 elastic bands on its edges: the first, twisting with a figure eight, the second simply hooking on both edges, the third similarly to the previous one. It should turn out like in the photo.
• Grab the loop of the right lower elastic band with a hook, thread it from above and place it between the posts. Do the same with the second loop on the left.

• Put on the next elastic band (it can be a contrasting shade or the same one that was used before). Crochet the loop on the right, which turned out to be lower, remove it from the posts, then do the same with the left.
• Put on the next rubber ring, remembering to alternate colors, follow the technique of the previous steps. Continue weaving until the bracelet is the length you need.

• Next, you need to fix the bracelet on both sides so that it does not crumble. To do this, fasten the clasp, as shown in the photo, remove the bauble from the fork, and then remove the extra rubber bands.
• How it should turn out:

Such a popular type of needlework as weaving bracelets from small plastic rubber bands has not lost its relevance for many years in a row. The reason for the demand for this art lies in the simplicity and multi-colored charm of weaves. Weaving rainbow bracelets, baubles, toys and figurines is allowed for children from the age of 8, but often this type of handmade is also liked by adult needleworkers, both women and men.

There are many ways to weave jewelry from rubber bands, we will consider them all in this article using the example of knitting the most popular models of bracelets, starting with the simplest and ending with unusual patterns. Also, using the example of detailed photo and video tutorials, we will learn how to weave the most interesting models rubber bracelets, even if there is very little experience in this art.

How to make a rubber band bracelet

There are several ways to create rubber band bracelets, each of which offers a variety of possibilities, depending on the level of the needlewoman and the desired result.

You can knit elastic band bracelets using:

• fingers;
• special slingshot;
• rainbow machine;
• a simple fork;
• hook;
• pencils / sticks for sushi.

The specifics of knitting on certain items differ slightly, so you should start by learning the basics of knitting from rubber bands, and gradually fill your hand for more complex patterns. Help with this craft step-by-step lessons of weaving bracelets from elastic bands, presented below.

Necessary set for needlework

Often in art stores, shops and salons, children's departments and specialized boutiques with goods for creativity, you can buy a special knitting kit from rubber bands called Rainbow Loom or Loom Bands. Most often, a set for knitting elastic bands includes multi-colored or one-color elastic bands, a rainbow loom and a slingshot for weaving, an elastic band crochet hook and a connecting clip for bracelets. All this is sure to come in handy when creating beautiful accessories.

The simplest and easiest ideas for beginners

Among the dozens of proposed schemes on different sites, attention should be paid to the simplest and most light bracelets from rubber bands, because they are so popular among beginner knitters in this style. This includes weaving bracelets on the fingers and working with a slingshot.

For example, on the fingers, you can easily and surprisingly quickly master such a model of an elastic band bracelet as a Fishtail. Whereas knitting this model on a slingshot will be more interesting and faster. Another popular type of bracelet among beginners is Dragon Scale. This is a fairly versatile pattern that can be knitted with all the tools for working with elastic bands. The choice is yours!

Fish tail

At first, acquaintance with the art of weaving from elastic bands usually works with the Fishtail pattern. It is quite easy to perform, moreover, it does not require involvement. additional tools. All you need is rubber bands, a connecting clip and the hardworking hands of a knitter. Let's take a closer look at how to weave a Fishtail bracelet from rubber bands in the easiest way.

Materials for work:

• one-color rubber bands - 50 pcs.;
• connecting clip;
• hands.

Progress:

The first rubber band is put on the index and middle fingers with a figure eight. Next, two elastic bands are put on without twisting.

The lower elastic is removed from both fingers separately for each edge, after which it forms a kind of double loop, as shown in the photographs.

Then another one is put on the fingers - the fourth in a row - an elastic band, also without twisting (this model of the bracelet involves twisting only the first elastic band in the whole work). Then, now the lowest gum is removed from the fingers in the same way as the previous lower one. This is the main work on the bracelet: adding one elastic band, and forming a double loop with the very last elastic band in the row.

These steps are repeated to the desired length. In the final, the ends of the product are fixed with an S-shaped clip-fastener.

dragon scale

The rubber band dragon scale bracelet is also very popular with beginner knitters. It looks interesting, especially due to its openwork structure and impressive width. Depending on the choice of knitting method and the number of columns on which the bracelet is knitted, the Dragon Scale will have its own width and delicacy. Consider the method of knitting this elastic band bracelet using two ordinary forks.

Progress:

We take two ordinary forks in our hand with the prongs towards us, and in the very middle of the legs we bandage them with tape or the same rubber bands. It is important that they do not move sideways and do not fall apart.

Each fork has four tines, which means we have four pairs of cloves 1-2, 3-4, 5-6, 7-8. The first row must be twisted in eights: a ring must be put on each pair of cloves, twisting it with a figure eight, as shown in the photo.

For the next row, you will need only three rings of the same color, this time you don’t need to twist them, just put them on the teeth, connecting them in pairs 2-3, 4-5, 6-7.

Putting on each new ring of the next row, you need to remove the loops of the previous row so that they overlap the new rubber bands. When removing the loops of the first row, we must leave them on the first and last clove, since we did not put on new rings on them.

So to get bright bracelets from rubber bands without a Dragon Scales machine, it is enough to adhere to a simple algorithm: alternate rows, connecting in pairs 1-2, 3-4, 5-6, 7-8 and for the next row 2-3, 4-5, 6-7. When creating a new row, do not forget to throw off the loops of the previous one. At the same time, two forks should form a line for you, not overlap each other, so that the product turns out to be neat.

You can make 4-5 rows of each color so that the mesh looks bright and beautiful, you can alternate only two colors or make the bracelet rainbow.

You need to adjust the desired length of the bracelet in the course of work. At the same time, it must be borne in mind that the elastic bands in this weaving stretch very well, and you need to control the process all the time so that the finished bauble does not fall off your wrist.

Very important point in the process of creating a bracelet from elastic bands - this is the final connection, because it will depend on this whether the loops will not unravel. The last row of the mesh will be different from the rest: it is necessary to put on one rubber band on all its cloves on one fork, twisting it several times, as shown in the photo of the master class. Remove the lower loops, do the same with the second fork. Now there is only one line left on each, you need to drop it from 1 tooth to 2, from 4 to 3. Hook the fasteners onto the remaining loops.

Knitting techniques in stages

Step-by-step lessons in weaving bracelets from rubber bands can be mastered by both children and adults, and the result will not take long, and will certainly please needleworkers and their loved ones. Of the many ways to knit bracelets, you can choose the most simple and convenient, and knit interesting accessories which cannot be bought anywhere.

Although the technique of knitting an elastic band bracelet differs depending on the chosen weaving method, the essence remains the same: weaving elastic bands on two or more columns allows you to get the most unusual shapes and patterns.

Instructions for knitting on a slingshot

A slingshot is a great tool for knitting elastic band bracelets. It is compact, lightweight, but at the same time allows you to knit beautiful and complex products. With its help, you can effortlessly tie such popular bracelet models as french braid, Pavement, Kolosok, Fusilli, and many others. Let's take a closer look at how to weave rubber bracelets on a slingshot using the example of the popular models "Heart of an angel".

Materials for work:

• 30 rubber bands of the same color and 60 pcs. another (the main color should be twice as much);
• slingshot for weaving bracelets;
• plastic hook;
• S-shaped clip.

Progress:

We take an elastic band of a secondary color, in this case white, and we start weaving: we twist it and put it on a slingshot, as shown in the photo. In the entire bracelet, only the first rubber band needs to be twisted.

The second elastic band is pink.

Hook the white elastic band on the left and carefully throw it into the middle of the pink elastic band.

Now pink gum from the right column and throw it on the left column.

Then you should put on a pink elastic band on a slingshot.

We throw off the white elastic band from the right column up so that it hooks the top pink one.

Add a white elastic band on top, without twisting.

We throw off the upper pink rubber bands in the middle of the slingshot on a white elastic band.

This is the beginning of weaving the bracelet Angel's Heart from rubber bands. The following steps must be repeated until the bracelet is the desired length. You do this stage, and when you come to the end of it, start again.

From above we put on another elastic band of pink color.

We pry off the lower pink elastic band on the left and transfer it up, throwing it into the middle of the slingshot.

Transfer the top pink elastic band on the right to the left.

We put on another pink gum.

Move the lower pink elastic band on the right to the top.

We transfer the upper elastic band on the left to the right side of the slingshot.

From above we put on a white elastic band.

We remove the upper pink rubber bands from both columns of the slingshot and transfer them to the middle so that they lie on the white elastic band.

Now carefully: we hook the hook under the pink elastic band, which is located in the middle of the column, and then we hook the white bottom elastic band with a hook. We drag it up and send it to the middle of the slingshot. We repeat the same on the other side.

Now we again go to the beginning of the stage and continue to weave gently until the bracelet is the desired length.

After the bracelet has been braided, transfer the pink elastic bands to the middle so that only white ones remain on the slingshot. We transfer both white elastic bands to one column of the slingshot and fix the clip on them. Then the other end of the clasp must be fastened to the beginning of the bracelet.

How to weave on fingers

Weaving rubber bracelets on your fingers is also very interesting, but it is better to choose simple models that weave quickly. How to use this skill and how to make a bracelet out of rubber bands on your fingers - we'll tell you right now with an example famous model double weave bracelet Double pigtail.

Progress:

We twist the elastic band with a figure eight and put it on the index and middle fingers. In the same way, we put another one on the middle and nameless ones.

We start weaving in the following technique: on top we put two more elastic bands on the same fingers and in the same sequence. Only this time we don't twist them.

We remove the side loops from the twisted first elastic bands.

On the middle finger you should have a double loop from the first rubber bands. We are also filming it.

This is the result you will get. This is the first finished loop.

At the very end, we make a knot to fix it. We remove the right and left loops on the middle finger. We separate them by a double loop that was on the middle finger. And then remove the double loop, tightening the knot. We fix with a hook.

Fork knitting method

Weaving bracelets on forks is a very original and budgetary way to give yourself and your loved ones a beautiful bright accessory. Consider a simple scheme of how to weave rubber band bracelets on a fork, and please everyone unusual gifts. It will be about wide bracelet with tight weave.

Materials for work:

• elastic bands of two colors;
• fork;
• toothpick.

Progress:

We put a folded lilac elastic band on the middle cloves of the fork and twist it with a figure eight. We also twist the next two elastic bands with a figure eight and put them on two teeth on the left and right.

Now we put on the elastic bands on the right and left without twisting. Raise the lower loops up.

We repeat all the manipulations in the following sequence: 1 elastic band in the center and 2 along the edges. Two rows of each color, after which we change to another.

Weave in this way until we reach the desired length. We complete the bracelet like this: we remove the loops from the extreme teeth to the middle ones, and from the lower ones - up. We put on the last elastic band on the middle teeth and remove all the loops.

At the end we fix the edges with an S-shaped hook. A tight bracelet made of rubber bands on a fork is ready.

Weaving on the loom

The most popular type of jewelry creation in this style is weaving a bracelet from rubber bands on a loom. It is this device that allows you to create the most complex patterns and large wide knitting. At the same time, craftsmen have the opportunity to use a number of additional elements of the so-called rainbow machine. Consider this interesting way weaving bracelets on the example of a model Star.

Materials for work:

• multi-colored elastic bands, including contrasting colors;
• machine;
• hook;
• S-shaped clip.

Progress:

Position the machine on a level surface in front of you with the arrows and U-prongs facing away from you.

First, we place the black frame of the future bracelet. Put a black elastic band diagonally on the first pegs of the central and left rows.

Put the second black elastic band on top of the first pin and on the second pin of the left row.

Continue in the same way until you reach the penultimate peg of the row.

Stretch the elastic from the penultimate pin diagonally to the last pin of the central row of the machine.

Now you need to return to the front of the machine and do the same with the right side. After that, all black elastic bands should be lowered to the bottom of the peg.

Now let's fill in the frame of the bracelet made of rubber bands in the style of "asterisk". Choose 6 rubber bands of the same color. Put the first elastic band on the second pin of the central row and on the second pin of the right row. In the same way, from the second peg of the middle row, put on 5 more elastic bands clockwise, forming an "asterisk". Lower the rubber bands to the bottom of the pins.

The second “star” of the bracelet must be started from the fourth peg of the central row of the machine. All six elastic bands of a different color are placed similarly to the first "asterisk".

In the same way, make 4 more "stars", remembering to lower the rubber bands to the bottom of the pegs.

After that, on the first peg of the middle row and the central peg of each star, put on a black elastic band, folded in half.

Now a very important point - the plexus of the bracelet. The machine must be positioned so that the arrows on the machine "look" at you. After that, in the middle row in the first pin, hook the colored elastic band, pull it up and put it on the second pin of the middle row (it is also the center of the sprocket). Thus, there will be two loops of one elastic band on the peg.

We do the same with the rest of the asterisk elements. In this case, the hook should cling the loop from the center of the asterisk to the peg, moving counterclockwise in a circle. We do the same with the rest of the stars on the machine. Be careful not to loosen the loop and break the weave.

Then you should do the weaving of the frame of the bracelet. We start with the first peg of the central row. Crochet the edge of the elastic that is hooked between the first peg of the middle row and the first peg of the left row. We stretch it up and put it on the first peg of the left row so that both edges of the elastic are on the same pin.

Continue to weave the left row in this way, stopping at the last peg of the middle row.

Similarly, weave the right side of the bracelet frame.

On the last peg of the middle row, hook all the elastic bands through which you then need to drag a new black elastic band. Both edges of the elastic are put on the hook.

After that, carefully remove the bracelet from the machine. Hold the hook and loop in your hand.

To lengthen the bracelet on an empty machine, we put on 5 black rubber bands.

Then, with a hook, you need to hook the edge of the elastic band from the first pin to the second, and from the second to the third, and so on.

Now the first extension loop must be connected to the loop of the bracelet, which is on the hook.

At the end, the ends of the bracelet are connected with a clasp.

Video tutorial on knitting a French braid

How to learn to weave a beautiful French braid bracelet from rubber bands? View a tutorial on how to make this beautiful accessory! Weave this magnificent bracelet, so similar to women's hairstyle, you can use all possible tools: fingers, a machine tool, a slingshot, two columns in the form of pencils, and even a fork. The pattern of knitting a French braid from rubber bands is quite simple, it can be repeated without much effort even by someone who has never weaved products of this kind before. Consider the method of knitting on a rainbow loom.

Video Ideas for Advanced

In order to not get tired of weaving bracelets, you need to constantly look for new ideas for inspiration and interesting schemes work. This will help our article with step-by-step video instructions for creating beautiful and unusual bracelets.

Beautiful pattern with voluminous flowers:

Interesting 3D weaving:

Weaving a bracelet "Spikelet" - good way make good use of your time.

A bracelet made of colored rubber bands, made in the style of "Spikelet" is a bright, original accessory, the creation of which can be an interesting activity for any creative person. Made in colorful, summer colors, it will perfectly emphasize individuality, regardless of the chosen style of clothing. And so, in order to weave the Spikelet with your own hands, you will need:

a simple weaving machine - "Slingshot";
silicone rubber bands in 2 matching colors (the number will depend on the length of the bracelet);
hook;
S-clip for fastening.

Following step by step instructions, you can learn how to create original jewelry yourself.

Step 1. It is necessary to turn the used machine towards you with the open side (in this case, it will be convenient to grab the rubber bands).

IN this master class small elastic bands of two colors are used: the sides of the bracelet will be orange, and the middle in the form of a spikelet will be light green. First you need to put on the first rubber band (orange), twisting it in the form of a figure eight.

From above, you need to throw another orange rubber band on both columns (you do not need to twist it).

Step 3. Pulling the green elastic band with the back of the hook, the lowest one (orange) is pulled out and thrown off to the center of the Slingshot.

A green rubber band is wound in two turns on the left column (over the rest of the rubber bands). A single orange is thrown on top.

Step 4. Pulling the green rubber band from the left column, the lower orange one is pulled out and removed to the center.

Starting from the next step, the technology of weaving the Spikelet bracelet changes slightly.

Step 5. Now, through the green rubber band folded in half, all the rubber bands located below are pulled out. They are still thrown to the center. It’s worth starting from the right column (it was on it that the green elastic band was put on before).

Step 6. Already from the left column, through the green elastic band, all the elastic bands are pulled out again and thrown off to the center.

Step 7. Without violating the sequence of alternating rubber bands, the bracelet is woven to the length of interest (depending on the girth of the wrist).

The longer the product becomes, the stronger its pattern will be drawn.

Step 7. When the desired length is reached, you can proceed to the final stage - close the bracelet.

At the end, green rubber bands are removed from both columns to the center.

From the left column, the two remaining orange elastic bands change into the right column. A fastener in the form of the English letter S is threaded through them.

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

The final look of the craft. Photo 3.

After you have already woven this beautiful bracelet, try to make another pattern, namely the Friendship bracelet. Link .

From elastic bands, which can often be seen not only on children, but also on their parents. Many people buy colorful needlework kits for themselves, but they don’t know how to weave rubber bracelets. For such beginners interested in this art, ELLE has collected several simple ways weaving bracelets from rubber bands for beginners with video links.

Elastic band bracelets from the Rainbow Loom style, the most popular manufacturer of these needlework kits, which made a real revolution a few years ago, are very easy to weave: the main thing is to master a few basic skills. They can be woven on a loom sold in a kit, on a slingshot, and even on a fork found in the kitchen. With the help of video links, everyone will master the art of weaving simple bracelets from rubber bands.

Fish tail

Any rubber band weaving lessons begin with mastering the basic fishtail technique. For such a bracelet, you will need about 50 elastic bands of the selected colors (beginners are recommended to start with one), a transparent clip to connect the bracelet from the set and two fingers.

First you need to separate three rubber bands - put the first one on the index and middle fingers with a figure eight, and the second and third on top, without twisting. Then the lower gum must be thrown off from both fingers in turn, taking it by the edges - it seems to hang on the other two, forming a loop. Then you can put on the fourth elastic band (all the elastic bands, except for the first one, do not twist) and, accordingly, throw off the third one from the fingers. Each time, putting on a new elastic band, the lower one must be taken by the edges and pulled up through the fingers. When the bracelet is finished, the edges must be fastened with a transparent clip, passing it through the extreme elastic bands.

Zigzag

For such a bracelet, you only need a hook from the set, as well as 50 rubber bands in two colors. This simple method will especially appeal to beginners, as it does not require much skill. First you need to take an elastic band of the same color and throw it on the hook with a figure eight. An elastic band of a different color must be thrown on the hook and stretched through the loops of the first elastic band, then throwing the second part of it onto the hook so that two loops of the same color are formed on the hook. Then again we take the elastic band of the first color and put it only through the first loop of the elastic band of the second color. We put the second part of this gum on the hook. After all these manipulations, one loop of the second color and two of the first should remain on the hook. At this stage, the entire structure should be turned 180 degrees, holding the rubber bands with your finger and sticking the hook from the other side. Thus, loops of the main color go first on the hook, followed by one loop of the second shade.

Every time after putting on elastic bands and creating loops, you need to remember about this 180 degree turn. When the bracelet reaches the desired length, it must be secured with a transparent clip.

Mermaid braid

Very beautiful rubber bracelets are obtained using the "mermaid braid" technique. To weave this bracelet, you will need a machine and 60-70 rubber bands in two colors, a clip to secure the bracelet and a hook from the kit. The bracelet is woven on two adjacent posts. First you need to put on two columns an elastic band of the same color, twisting it with a figure eight, and on the right column - an elastic band of a different color, folded in half. Then, on both columns, throw an elastic band of the first color without twisting. With the help of a hook, you need to pick up an elastic band folded in half and pull it to the side, after which, without removing it from the hook, pick up the lower elastic band (figure eight) and pull it towards the center. We repeat the same operation on the left column and then on the right - putting on an elastic band folded in half, throwing another over two adjacent columns. Pull off the double elastic band with a hook and pick up the four lower elastic bands of two colors. Then you always need to pick up the four elastic bands located at the bottom and throw them towards the center. When the desired length is reached, you need to remove all the lower elastic bands from the left column, with the exception of the top one, and crochet them to the center. Do the same with the right column, then transfer the upper elastic band from the right column to the left one and put a fixing clip on the two elastic bands. Hook the other end of the bracelet onto the same clip.