Shamballa weaving in different ways. How to weave a Tibetan Shambhala bracelet from laces

What associations do you have with the word "Shambhala"? Maybe Buddhist teachings or Egyptian yellow tea Shambhala egyptus? Perhaps a few percent of the respondents will choose these options, but most people associate the concept of "Shambhala" with the famous decoration.

The Shambhala bracelet is the most popular jewelry of the last decade. What attracts this, at first glance, inconspicuous accessory so many people? In fact, a beautiful bauble made of beads and cords will help not only complement your everyday look, but also protect you from the negative influence of others, cleanse your aura and attract good luck and prosperity.

Origin of decoration

The idea for this piece belongs to Buddhist monks who weaved amulets for themselves while reading prayers. Initially, the bracelet was a silk rope, on which nine special knots were tied. mantras, that the monks read, filled a simple cord with unknown power. This power provided patronage in all spheres of human life.

Beads began to be woven already in India, which is famous for its inimitable jewelry. Beads from precious stones began to be intertwined between traditional knots.

Years later, the idea of ​​the bracelet was successfully reworked by the Kornerap brothers. The popularity of uncomplicated cord weaves exceeded all expectations. After all, an ornament that guarantees the protection of the gods is necessary for everyone.

Unusual jewelry can be easily bought at any jewelry store or a jewelry kiosk. You can even choose stones and beads according to your zodiac sign or date of birth. At your request craftsmen can make personalized baubles and weave a wide variety of elements: from precious stones to wooden beads. But the ideal decoration option is a handmade Shambhala bracelet. Indeed, in the process of its creation, you give away a piece of yourself, your life, your energy. And in return you get much more:

• harmony in the family;
• career success;
• protection from ill-wishers.

Selection of materials for weaving

If you decide to weave a Shambhala jewelry with your own hands, then start with the selection necessary materials. First, decide on the color of the beads and the shape of the product, then on the texture and thickness of the cord. Whatever components you choose, remember that the Shambhala bracelet is not just a do-it-yourself rope weaving . You will need to get it right in macrame technique, choose materials and even view a master class. A do-it-yourself shamballa bracelet is a fairly popular topic on the web, so you can easily find information about weaving techniques and methods. For a standard bracelet, which consists of one tier, you will need the following components:

• waxed cord (about two meters);
• 7 colored beads;
• 2 smaller beads (for the lock);
• superglue (or glue Moment "Crystal");
• scissors;
• A4 book;
• clips that are used in the office.

For Shambhala bracelet, as a rule, they take 5, 7 or 9 beads, it all depends on your idea, but you should start with a simpler option.

Bracelet weaving technique

First we need a cooked waxed cord- the basis of our bracelet. Measure your wrist and add 7-12 to the lock on both sides - this will be the length of your creation. If you are afraid of making a mistake, then make a larger margin. The standard length is approximately 40 cm.

Thus, the bracelet is an alternation of left and right knots. It is these knots that are the distance between the beads.

The number of knots between the beads is up to you. But most often it is two nodes, then a bead, and the next two knots until you run out of beads.

Final works

When the main part of the work is finished, you need to fix the cords. To do this, turn the bracelet over, take the left end of the cord and put it through the loop on the right. Under it we drip a little glue moment “crystal” and tighten it. Now both the face and the underside of the bracelet look perfect.

It remains to weave the lock to the bracelet so that it can be tied. The first knot is the same as at the very beginning of weaving, only there are two cords at the base. Then we alternate the right and left nodes until we get the desired length. In the middle of weaving, you can insert a bead if you have prepared it.

We fix the threads and the bracelet is ready!

Now you know, how to make a bracelet with your own hands which can drastically change your life. As you can see, everything is not as difficult as it seems. Remember: you need to start weaving in a great mood and with positive thoughts. Then the magic bracelet of Shambhala will make your life brighter and richer, fill it with joy and love, protect it from damage and the evil eye.

Attention, only TODAY!

Do-it-yourself weaving of bracelets from laces came to modern realities from Tibet. And more specifically, weaving a Shambhala bracelet. Initially, the monks wore products made of silk laces on their hands, which had a slightly different shape. The meaning of such weaving is the search for inner harmony, relaxation and purification of consciousness through meditative weaving.

In contact with

A bit of history

What meaning the Tibetan monks put into their creation is unknown to us for certain. But we know that such a thing has been at the peak of popularity for many years, showing off on celebrity photos. And even if you do not put any supernatural meaning into the product, such a product will become original and fashion accessory.

Traditionally, the Shambhala bracelet consisted of bone beads with a carved pattern. But time passed, and gradually the tradition of weaving bracelets with their own hands migrated to India. There was a replacement of classic silk laces and bone beads, gems appeared. Classical Indian list of stones for bracelets corresponds to the nine heavenly bodies:

However, today it's just fashion accessory having ancient history. Consider in detail how to weave a Shambhala bracelet.

Weave a Shambhala bracelet: necessary inventory

Of course, the era of the Internet allows you to purchase any product at any price. However, a unique decoration is not cheap, and getting it is not as easy as we would like. In such cases, their own talents come to the rescue. How to weave Shambhala?

To make a Shambhala bracelet with your own hands, you will need:

Now let's start weaving. But before you start studying a master class on how to weave a Shambhala bracelet, you need to master the basic skill - weaving a square knot. Without this skill, you will not be able to quickly create the desired accessory. So let's get started.

Weaving a square knot

Weaving this knot helps to develop fine motor skills and attentiveness, and also, having mastered such a knot, you will no longer wonder: how to make a bracelet out of laces. For ease of understanding when weaving, we use colorful laces. The white cord is the main one, the knots are woven with a two-color cord. One side is blue, the other is yellow.

Having mastered the basic square weaving - do not stop there. Experiment, find educational videos and photos. Improve and create your own unique pattern.

Weaving a bracelet: a detailed master class

The above technique is called macrame. With its help, you can create your first Shambhala bracelet with your own hands. However, this time square knots must be alternated with colored beads.

As a basis, we choose a cord 50 cm long. Beads will be strung on it. If the selected lace is too wide for the hole of the bead - do not worry, you do not need to run for a new one at all. Take scissors and cut off the end of the lace at an angle, then singe it with a lighter. Putting a bead on a cord, try not to thread it easily, but to wind it. Remember: the main thread must be in a taut state and be motionless during weaving.

Clasp Features

The clasp of the Shambhala bracelet is also unusual, it needs to be woven. To do this, you need another lace 30 cm long. Let's get started:

As decoration small beads can be attached to the free ends of the bracelet. They are also attached with knots. On the Internet you can find a large number of photos and videos of design options for such bracelets.

Do it yourself, after detailed master class quite easy. In addition, the creation of such products can become your hobby.

Treat your friends and loved ones by making your own designer bracelet for them. Look especially impressive Shambhala bracelets made using natural stones .

Shambhala bracelets: photo

Shambhala bracelets are an adornment that has gained popularity both among Hollywood and domestic stars, and among people who are not related to the world of fashion and show business.

The Shambhala bracelet is a string of beads braided, as a rule, with a silk or waxed cord using flat knots tied according to the principle of macrame square knots.

What is the secret of the attractiveness and incredible popularity of this simple and uncomplicated at first glance jewelry? I think it's all about the absolute versatility of Shambhala bracelets. After all, they are worn by both women and men. And the beads for the Shambhala bracelet can be very diverse at all: from natural precious or semi-precious stone, metal, plastic, wooden, round, square or even curly.

In addition, the Shambhala bracelet can be worn as ordinary jewelry, or you can use it as an amulet or talisman, endowed with special magical properties. In a word, Shambhala bracelets can be called an adornment for every taste without exaggeration.

Like many lovers of creating handmade jewelry, one day I also wanted to make a Shambhala bracelet with my own hands. And since I am not a big fan of wearing bracelets, but prefer a mosaic necklace braided from beads, I decided to weave a Shambhala bracelet for my son and prepare a small

Master class on weaving a men's Shambhala bracelet

Tools and materials for making a Shambhala bracelet:

• silk cord (2 m 20 cm);
• beads (7 hematite beads with a diameter of 10 mm, 2 hematite beads with a diameter of 7 mm, 3 curly metal beads in the form of a skull - a favorite symbolism of children of adolescence:));
• scissors;
• glue "Moment Crystal";
• plastic tablet with clip

Important! When choosing materials for making a Shambhala bracelet, pay attention to the diameter of the holes in the beads and the thickness of the cord. Since the beads will have to be strung on a cord, the holes in them should not be too small, and the cord, accordingly, should not be too thick.

A single Shambhala bracelet is woven from three pieces of cord. In the process of weaving, the beads are strung on the central cord and braided with two extreme cords. Therefore, in order to determine the required amount of cord, I measure

• arm circumference 3 cm above the wrist;
• the estimated length of the braided clasp of the Shamballa bracelet;
• the desired length of the "tails", with the help of which the Shambhala bracelet is tightened on the arm.

Based on the measurements made, I cut off three pieces of silk cord:

• a piece of cord for stringing beads 50 cm long (wrist girth + 2 lengths of “tails” + 3 lengths of the bracelet clasp + small allowances);
• two pieces of cord 70 cm each (for weaving macrame, the length of the side cords should be three times the estimated length of the finished product + allowances of 6-8 cm for processing the edges of the bracelet).

I connect the cords for weaving the Shamballa bracelet into a bundle and tie them on one side into a loose knot, leaving free ends 5-6 cm long.

I fix the knot with a clamp. It is not necessary to use a plastic tablet for this purpose. A wide stationery binder, such as the one used to weave a leather cord, is quite suitable.

I conventionally number the segments of the cord for weaving the Shambhala bracelet from 1 to 3. Cord No. 2 is the central one. Beads will be strung on it. When weaving a bracelet, it is necessary to ensure that cord No. 2 is well stretched.

Weaving a flat square macrame knot for a Shambhala bracelet

1. I lay cord No. 1 on top of cord No. 2:

2. I put cord No. 3 on top of cord No. 1:

3. I pull cord #3 under cord #2 and lay it over cord #1:

4. I tighten the twisted cords into a knot and get the first half of a flat square macrame knot:

5. I stretch the cord No. 3 under the cord No. 2:

6. I lay cord No. 3 on top of cord No. 1, and I lay cord No. 1 on top of cord No. 2:

7. I stretch cord No. 1 under cord No. 3:

8. And again I tighten the knot (the second half of the flat square knot):

For greater clarity, I propose a scheme for weaving a square flat macrame knot, where the cords No. 1, No. 2 and No. 3 are indicated, respectively, in blue, orange and green colors:

So, we figured out the principle of knitting macrame knots, and you can continue weaving men's bracelet Shambhala is next.

Weave 2 more flat square macrame knots in the manner described above.

In order for the silk cord to easily pass into the hole of the bead, I cut off the end of the cord with scissors and fix the fibers of the cord with glue. Now the end of the cord will not "shag" and interfere with the stringing of beads.

I string the first large bead from hematite on cord No. 2. I secure the bead with a flat macrame knot.

Since I decided to place the beads in the Shambhala bracelet close to each other, I make only one knot. Although, if desired, the number of nodes between the beads can be increased.

I string the next bead on cord No. 2 and again secure it with a flat macrame knot.

I continue weaving the bracelet, alternating beads and square flat knots.

After the last bead is strung, I perform 3 knots, as before the first bead.

Then I turn the bracelet over to the wrong side and tie the remaining ends of cords No. 1 and No. 3 with a regular knot.

The completed knot is securely fixed with glue,

Then I cut off the ends of the two side cords as close to the knot as possible.

I release the second end of the bracelet from the clip, untie the starting knot and fasten the free ends of the two side cords in the manner described above.

How to make a Shambhala bracelet clasp

The clasp for the Shambhala bracelet is woven in the form of a chain of flat square macrame knots mastered by us earlier. And for its manufacture, I need another small piece of silk cord 30 cm long.

1. I fold the ends of cord No. 2 together so that they look in opposite directions.

2. I fold the extra piece of cord in half and wrap it around the folded ends of the bracelet.

3. I tie a macrame knot so that the “tails” of the bracelet are in the middle, and the ends of the additional piece of cord are on the sides.

Attention! When weaving a Shambhala bracelet from a silk cord, the fastener knots must be tightened quite tightly so that the bracelet does not unfasten spontaneously during wearing.

Upon reaching the required length of the fastener, I tie the ends of the side cords with a regular knot on the wrong side of the bracelet, fix it with glue and cut off the excess.

I string two small hematite beads on the “tails” of the bracelet, cut off the ends of the cords to the required length. I make a knot at the ends of the “tails” of the bracelet, each of which I fix with a drop of glue.

Well, well, perhaps now you can arrange a fitting

My son liked the Shambhala men's bracelet so much that he does not part with it even for the night. And this is the best compliment you can get from a teenage child :).

Create fashion jewelry do it yourself with HobbyMama!

Decorations self made valued at all times. In-line production of products deprives them of the energy that each master puts into his works. The manufacture of bracelets is of interest to many, especially the Shamballa bracelet. After all, if you make it with your own hands, use materials that have a positive effect on the body, you will get not just an ornament, but a real amulet. Since ancient times, this type of weaving has been used by shamans and clairvoyants to protect a person.

The popularity of "Shambhala"

In recent years, this type of bracelet has become very popular. Many are interested in how to weave a Shambhala bracelet? Not everyone is familiar with such needlework as macrame. But “shambhala” is a weaving of macrame, which is interspersed with beads. This is a very simple type of jewelry making, and most importantly, you can use different materials: beads, beads, natural stones, match different colors and shades of cords, beads, dividers. This makes it possible to create Shamballa bracelets for different sets of clothes.

The finished image and style of the costume will be given by the "Shambhala" bracelet. The handmade jewelry is a real exclusive. They are woven from bright beads, often using interweaving of wooden parts and natural stones. Instead of a cord, strips of leather are used, especially when making bracelets for men.

Everyone wears Shambhala: women, men, young people, children. It all depends on the design and the material used. This is one of the decorations that suits everyone, regardless of age.

flat knot

In order to create a bracelet for yourself, you should master the weaving of several macrame knots. To do this, a knot is tied on a vertical thread with another piece of cord. There were three cuts. Weaving will be done around the central thread - extreme.

The right segment rotates and is horizontally located on the central thread from above. The left one - over the right one, winds down and under the central thread is inserted into the loop, which, when turned, was formed by the right thread. The knot is tightened, but not very much. Next, the left segment of the thread turns and is located horizontally above the central thread, thus forming a loop. The right segment over the left one is wound under the central thread and output through the formed loop. Pulling both ends of the cords in different directions, the knot is slightly tightened.

This results in a flat knot. It is from such fragments that the “Shambhala” consists - a bracelet, a photo of which can be seen below.

Tools and Parts

They will help you not to get confused while working on the product and create beautiful even knots. You won't need a lot of tools: scissors, a silk cord two meters long, nine beads (the diameter of the hole in the beads must be at least 2 mm), transparent nail polish, Moment glue. You should correctly and consistently weave the Shamballa bracelet. The master class will help you do everything accurately and accurately.

The color of beads and silk cord is selected according to your taste. Of course, the combination must be perfect for the bracelet to look stylish. The ends of the cord are treated with nail polish, which is allowed to dry well. This is required so that the beads can be easily threaded onto the thread. A piece of cord 40 cm and 1 m long is taken. A clasp will be weaved from the remaining piece 60 cm long. Beads are taken as the same color, and different, but in the right range.

Step-by-step instruction

The instructions give short description how to weave a Shamballa bracelet. Accurate execution of all steps guarantees an excellent result. To help, many craftswomen use a wooden stand, on which the main thread is fixed. But some get by with a soft armrest of a chair or chair - a thread is fixed on it and a bracelet is woven. So...

• A thread 40 cm long is fastened vertically. A knot is tied with a long cord not far from the attachment point. It turns out the central thread and two long ones, on both sides. One flat knot is knitted.

• Then one bead is put on, and another flat knot is made under it. To keep the weaving from spinning, the knot must be done correctly. To do this, each element of the node should be alternated. If you always start tying from the same side, you will get not a flat knot, but a spiral.

• Thus, three beads of the same color are braided. The next bead will be the center one. Often it differs from the previous elements: larger or a different shade.

• After tying the central bead, weaving is repeated, as before. Three more beads are added and the final knot is made. The ends of the cord are cut off.

In weaving a Shamballa bracelet, a silk cord is often used, the ends of which are fixed either with glue or with a lighter. This is done so that the final knot is not untied.

Bracelet clasp

Now that it has become clear how to make a Shamballa bracelet, you need to move on to weaving the clasp. To do this, the remaining ends are combined with one another by overlapping. Prepared 60 cm of the cord are used to weave the clasp: a knot is tied that secures the combined ends of the bracelet.

Next, already known flat knots are weaved, each time changing the side of the beginning of knitting. The number of nodes can vary: they are made by five or six. They are tightened tight enough so that you can change the volume of the bracelet.

But not too hard - tightening it too tight can "lock" the bracelet. It is enough if it moves apart with little difficulty. Easy opening can lead to its loss.

The final stage

There are many master classes on the Internet on how to weave a Shamballa bracelet. But in each of them the clasp is executed differently. Having knitted two or three centimeters, the working threads on the inside must be glued with Moment glue or nail polish. Excess - cut off.

In conclusion, the threads that tighten the lock should be planted on a bead and knotted to prevent the cords from jumping out of the weave. After this operation, the “shambhala” (bracelet), made with his own hands, is completed. It is easy to put on and pull up, you can adapt it for hands of different fullness.

Additional features

The simplicity of making a Shamballa bracelet makes it very popular among jewelry. After all, this product can be made from beads and a cord. different kind and colors. Additionally, the bracelet is decorated with pendants or jewelry.

Having learned how to weave a Shamballa bracelet, it is used for decoration wrist watch- the original bracelet will give them style. Like other works related to creativity, the result of weaving a bracelet largely depends on the taste and abilities of a person. With a little imagination, you can weave a variety of compositions. Samples of such products can be seen in the photographs showing finished products.

Despite the fact that the principle of making bracelets is the same, they look like completely different jewelry.

Types of materials

When creating a bracelet, you can use beads of different quality. It can be wooden, glass and natural stone beads, large beads. Beads are prepared from polymer clay is very original and beautiful products that are varnished. Peculiar patterns and shapes give the bracelets originality.

Natural stones, if they are correctly selected according to the zodiac sign or other signs, can become an amulet for someone who wears a Shamballa bracelet. It will bring real health benefits and protect a person.

Weaving a Shamballa bracelet, or rather, its result, also depends on the quality of the material, for example, a cord. It should be thick and decorative. Silk cords are often used, but nylon and waxed cords can also be used. The knots that will be knitted look very bold and beautiful on these cords. This is what the craftsmen who undertake to make the Shamballa bracelet should achieve.

Shambhala bracelets are not only beautiful decoration. Since ancient times, it was believed that these bracelets protect a person from negativity and give inner peace, as well as strength to overcome all difficulties in life.

A master class with step-by-step photos will help you make a Shambhala bracelet with your own hands.

Materials and tools:

• Board for assembling jewelry
• Waxed white cord
• Red beads - 5 pcs.
• Scissors
• PVA glue or clear nail polish

Manufacturing:

We start weaving the bracelet from the board for assembling jewelry: it is very convenient to make accessories by stretching the main cord between two nails of the board. However, it is not at all necessary to have this tool: you can weave a Shamballa bracelet without it, without fixing the warp cord anywhere. If we have a board for assembling jewelry, we tie the end of the waxed cord around it. Then we measure 50 cm of the cord, starting from the nail, and cut it off.

We string the prepared beads on the same segment of the white cord, using its second (untied) tip. Then this end of the cord can be tied to the second nail of the board, which is located at a distance of 30-50 cm from the first.

We unwind the second segment of the cord - its length should be at least 2 m. With this cord we tie the main thread of the bracelet at the beginning of weaving (we tie a regular but strong knot).

We arrange our blank for the Shamballa bracelet so that the main cord is located vertically, and there is a knot just tied at the top. On both sides of the knot we see two long pieces of cord, 1 m long. We take the left part of the cord: we draw it under the main vertical thread and put it on top of the right cord.

Now we take the right cord, draw it over the vertical thread and bring it out into the loop formed by the left thread.

We carefully tighten this combination and see that the cords are tied into a kind of knot.

This is the basic macrame knot that underlies all Shambhala bracelets.

In the same way, right next to the first macrame knot, weave the second one. Only this time we start with the right cord, and complete the combination with the left thread.

40 macrame knots - that's how much we need to knit at the beginning of the shamballa bracelet. Do not forget to alternate the role of the cords: we start one knot on the right, the next on the left.

We move the first red bead to the macrame knots and begin to weave it into the product. To do this, we braid the bead with a regular macrame knot.

And tightly tighten the cords.

After that, weave three empty macrame knots and move the next bead to the weave. We braid it with a macrame knot, then weave three knots and move the next bead. According to this scheme, we weave all five red beads into the bracelet.

After the last bead, we need to knit 35 macrame knots - 5 less than they were at the beginning of the decoration. We will weave 5 more knots later - thus, we will balance the number of knots on both sides of the Shamballa bracelet.

On both sides of the bracelet, stepping back 5 cm of the main thread, we tie one ordinary knot at a time and cut the cord further than the knots. At the same time, we cover the nodes themselves with PVA glue or transparent nail polish to fix them.

Now we make an adjustable clasp of the bracelet: here we will knit another 5 knots of macrame. We connect the bracelet in a circle and put together both ends of the cord with knots. We braid the macramé knot around them with side cords - exactly the same as all the knots of the bracelet.

Then we tighten the cords and weave 4 more knots around the two ends.

The clasp is almost ready, but we need to get rid of the side cords, which are no longer needed. We tie them into two strong knots on the wrong side of the bracelet and cut them off with scissors. Do not forget to grease the knots with glue so that they do not bloom.

We have a Shamballa bracelet with an adjustable clasp ready. Thanks to the fact that we braided two ends of the bracelet with five knots of macrame, now we can push the bracelet apart and close so that it can be worn on any wrist.