A wreath of origami modules. New Year's toys-origami on a Christmas tree made of paper

I first saw such a wreath on foreign sites, but could not find it in any way. good description. I had to open 3 different pages in parallel and figure it out step by step. But it turned out not to be difficult at all! I offer my version of MK. It took me 11 minutes to make one element. Plus gluing and beading.

For work you will need:

• square sheets of paper, 20 x 20 cm in size, 4 green and 4 red;
• pencil glue;
• PVA glue;
• 8 beads;
• hanging thread.

How to make an origami wreath:

1. On the sheet you need to bend the diagonals and transverse lines. It is necessary to fold carefully so that all lines intersect at one central point.
2. From each corner, fold the sides along the diagonal (in the form of a kite). Smooth out the folds and unfold.
3. Here's what the sheet looks like with the folds marked. Now you can start folding.
4. We combine the lower corner with the red dot at the top, which is located on the diagonal at the intersection of the intended folds. Below we notice two points and smooth the distance between them.

   

5. The ears that formed to the right and left of the triangle between the red dots are tucked inward under the triangle. For the next step, I marked in blue the side of the triangle and in red the intended fold line that comes from the left corner of the base of the triangle.
6. We combine left side triangle with a line from the left corner. Carefully smooth the fold and straighten the triangle to its original position.
7. Now similarly combine the right side of the triangle with the line from the right corner. Smoothing, straightening.
8. In the middle of the triangle, new folds formed two small triangles, converging at the vertices at one point.

   

9. We close these triangles with our fingers and smooth the folds along the marked red line.
10. I got a petal. The central vein is marked in red, one of the sides of the leaf-quadrangle is marked in blue.
11. We combine the blue line with the red one and smooth the fold.
12. Repeat step 11 for the left side.

    

13. Next comes the repetition of steps 4-12, but I will repeat a little for clarity. We unfold the craft with the finished leaf up and again begin to work with the bottom corner. The dots indicate the same reference nodes - the corners of the triangle.
14. We combine the lower and upper corners, smooth the fold between the points.
15. We fill inward the parts protruding beyond the sides of the triangle.
16. Let's move on to points 5-12.

    

17. We arrange the finished leaves horizontally and again work with the lower triangle.
18. Here the base of the triangle is already clearly visible, along this line we bend the triangle up. We repeat steps 5-12.
19. We place the figure with the last free triangle down.
20. Repeat 5-12 and glue the two opening parts from the inside with pencil glue. The first element is ready.

    

21. In total, you need to prepare 4 green and 4 red elements.

    

22. The elements on the reverse side are squares. Lubricate the corner of one element with pencil glue and insert it into the pocket of an element of a different color, moving along the diagonal and deepening exactly 2/3. It is important that the Christmas wreath is even. Repeat the action alternating colors until the circle closes.

    

23. We drip a drop of PVA into the center of each element and put it on it yellow bead. We are waiting for the glue to dry, and use it as New Year's decor. The wreath can be hung on the door or placed in the center of the festive table, placing a New Year's candle in the center.

Shared the master class

Kononenko Anastasia

Bright holiday decoration for your home - Christmas wreath in engineering origami you can DIY to prepare your home for the new year. Involve children, friends, all family members in the creative process. Good mood guaranteed!

How to make a Christmas wreath

For crafts you will need:

• 8 red squares of paper measuring 10x10 cm;
• 8 square sheets Green colour, the size is the same;
• PVA glue;
• materials for decorating the middle of the flower (sequins, sequins, beads or rhinestones).

To begin with, we will collect individual parts from red and green paper, and then connect them together.

Leaves

Let's start making leaves from green squares. Take one and mark vertical and horizontal lines by folding the sheet in half in a different direction.

Then fold each side towards the center crease. As a result, the sheet will be divided into equal squares. It remains only to fold it diagonally, and it is ready to assemble the figure.

Point each side to the center of the sheet, and fold the ends in half, directing one by one in the chosen direction. After folding all the sides, it will look like this.

One green part for the Christmas wreath is ready. Make 7 more of these and set aside.

Red flower

Now take the red leaves and fold each one as follows:

Connect the red parts to the green ones using glue. Decorate the middle of the flowers with rhinestones, sequins or beads, which is at hand.

Collect finished products in a beautiful wreath. Connect them in a circle, gluing parts in inconspicuous places. Eight colors form a perfect circle. We took shades just right for the New Year and Christmas.

With the help of this decoration, you successfully decorate an apartment or a hall for holding new year events. But that is not all. Complete the Christmas wreath using the origami technique. Search step by step instructions by links.

Happy New Year and a magical Christmas everyone! Don't forget to subscribe to new articles to stay up to date interesting crafts in origami style!

There is such a tradition - to decorate the house for Christmas with Christmas fir wreaths with candles. Although the tradition is not entirely Russian, it is very beautiful, so we will support and make such a paper wreath with our own hands. Decorate it with confetti, ribbons and a paper candle.

Master class on how to make a paper wreath

To make a craft, we need: paper disposable plate, colored paper light and dark green, red, white, yellow, scissors, glue.

Let's start by cutting out and removing the bottom of the plate, we only need the edges. We cut the paper of two shades of green into strips of 1 cm thick. Then glue the strips on the plate, connect the edges.

We glue around the entire perimeter, alternating light and dark stripes. Then we cut the ends.

Let's make a candle. Cut out 2 strips of white paper. We lay on each other perpendicularly, glue the ends. We first bend one tape to another, then the second to the first, and so alternate until we get a candle of the desired length. glue the ends.

It is better seen on the example of yellow and red stripes, by the way, a candle can be made multi-colored.

We cut out and glue the flame of the flame, decorate the wreath with a red bow, circles of red paper and cotton balls.

A winter day, December, a day off… getting closer, but I really want to plunge into the holiday atmosphere today. One of right ways- Decorate the house for Christmas. Together with the masters festival "Artos" We have prepared for you some photo instructions of bright and simple Christmas crafts.

origami christmas wreath

1. Now we will make a very simple and elegant Christmas wreath. We need eight identical paper squares. For example, 4 green squares will symbolize fir branches, and 4 red ones will symbolize a scarlet Christmas ribbon. Take a square piece of paper and fold it in half.

2. In order not to be mistaken, fold as in the photo - from the bottom up.

3. Fold the side corners as shown in the photo. And then try to fold the whole structure in half.

4. If you did everything right, you will get such a paper corner. This is one module of our future Christmas wreath.

5. Prepare all modules - 4 red and 4 green. modular origami resembles a designer - now we will add a real work of art from these details.

6. Before proceeding to the final part of collecting crafts, carefully study how your module works. If you did everything right, you will see that it is easier to insert the parts into each other when you get into the "pockets" between the layers of paper. Look carefully how I do it in the photo.

7. The modules need to be folded in a circle, one into the other, then you do not need glue. The circular design will hold itself. If necessary, for strength, it can, of course, be imperceptibly glued.

8. The resulting wreath can be hung on a door, on a Christmas tree, or simply hung on threads in your cozy home. Make a wish and wait, Christmas will come to your house much faster.

Thank you for your help in preparing the material

It's getting closer, but I really want to plunge into the atmosphere of the holiday today. One of the surest ways is to decorate the house for Christmas. Together with the masters festival "Artos" We have prepared for you some photo instructions of bright and simple Christmas crafts.

origami christmas wreath

1. Now we will make a very simple and elegant Christmas wreath. We need eight identical paper squares. For example, 4 green squares will symbolize fir branches, and 4 red ones will symbolize a scarlet Christmas ribbon. Take a square piece of paper and fold it in half.

2. In order not to be mistaken, fold as in the photo - from the bottom up.

3. Fold the side corners as shown in the photo. And then try to fold the whole structure in half.

4. If you did everything right, you will get such a paper corner. This is one module of our future Christmas wreath.

5. Prepare all modules - 4 red and 4 green. Modular origami resembles a designer - now we will add a real work of art from these details.

6. Before proceeding to the final part of collecting crafts, carefully study how your module works. If you did everything right, you will see that it is easier to insert the parts into each other when you get into the "pockets" between the layers of paper. Look carefully how I do it in the photo.

7. The modules need to be folded in a circle, one into the other, then you do not need glue. The circular design will hold itself. If necessary, for strength, it can, of course, be imperceptibly glued.

8. The resulting wreath can be hung on a door, on a Christmas tree, or simply hung on threads in your cozy home. Make a wish and wait, Christmas will come to your house much faster.

And if something didn’t work out, or you want to learn how to make other Christmas miracles out of paper, come to the Artos Festival. Show and teach. Merry Christmas!

Thank you for your help in preparing the material for the Artos festival.