Knitting hats for boys for beginners. How to knit a hat-helmet for a boy with knitting needles? Even beginners can do it

Helmet. Yarn Peter Pan Wendy composition: 55 nylon (polyamide) 45 acrylic. 50 gr - 170 meters. Recommended knitting needles number 3 1/4 - 4. Exactly 100 grams (2 skeins) were used on the helmet. I knitted in 2 threads with knitting needles number 3 very tight, I was afraid that it would stretch, but I didn’t take into account that this was not pure acrylic, almost did not stretch after washing. The helmet turned out to be very tight and hard, barely pulled on. Softer after washing with conditioner. I advise you to knit with needles number 4 and medium density, do not tighten much. The advice is for this yarn in two additions and for this calculation of loops, which is in the description.

In general, I made a hat for my brainchild (in the photo, the doll is my favorite e.ch.). Simple and, in my opinion, tasteful.
Here I decided to post a detailed photo essay on how to tie it, in short, a master class (although which one of me is a master!).
It will take time for someone like it, it’s 4 pm for me, but still it quickly fits.
So, here we go...

Hope it's clear and understandable ;)

9) Description from the newspaper "Home Atelier", November 2007.

Cast on 84 stitches with red yarn. Knit 37 rows in a circle on four knitting needles with a viscous "gum" 1 * 1 in one thread. Then knit two rows of pink yarn in two strands of the same viscous. Bind off 10 sts anywhere - this is the start of the face hole. Next, knit 3 more rows of pink yarn in two strands of the same viscous. For the next 12 rows, knit with red yarn in two threads also with an “elastic band” 1 * 1. Then 5 more rows of pink and 5 rows of red. Bind off 24 sts on each side. Leave the middle loops on the needle and knit another 26 rows with the same viscous. To round off the forehead, close the edges, first 2, then 3, then 4 loops, and then all the remaining (.
If you do not need ears, then “sew” the sides and top.
If needed. Then dial 18 loops from under the closed 24 from any side (pink yarn in one thread). This is the bottom of the eyelet: work 9 rows, then add 1 on each side on rows 10, 14 and 18, then single crochet again until row 27. In 27, 28, 29 and 30 rows, close 1 loop each, in 31 and 32 - 2 each, in 33-34 - 4 each. And in the 36th row, close the part completely.
Now cast on 18 stitches with red yarn in one thread.
18 loops from under the side edge of the upper part of the cap - the upper part of the eyelet. Knit in the same pattern. Repeat both steps on the other side of the hat. Turn the hat inside out and sew the pink and red ear pieces on each side. Sew the top of the hat to the sides. Cast on 82 loops in a circle (in one thread with red yarn) from under the closed and side loops (for the elastic band that will be around the face). Knit in rib stitch 1*1 for 18 rows. Pin the elastic to the inside of the hat.

http://www.nashevse.tv/forum/viewtopic.php?t=4800&sid=

10)

HELMET You will need: yarn Lang VARNS (100% wool, 55 m / 50 g), 100 g - burgundy, 50 g melange in red-brown tones interspersed with blue, knitting needles No. b, hook No. 5. Knitting density: 15 p. x 30 p. = 10 x 10 cm (front surface). On knitting needles No. 6, dial 3 sts and knit, adding in each person. in a row, 1 st on each side, until there are 15 sts on the needle. Set aside the work and knit another of the same detail. On the left side, dial 26 sts and knit 15 sts from the set aside knitting needle so that there are 56 sts on 1 knitting needle. Knit 4 rows of faces. ironing, work to postpone. Next, knit a visor. Dial 9 p. And knit 10 rows, adding 2 persons in each. row on both sides, 1 p. = 19 p. Knit an openwork row: 1 chrome., * 2 p. together, 1 yarn over. *, from * to * repeat until the end of the row, 1 chrome. The next row is purl. Knit the resulting visor with the already existing "ears" and connect the work into a ring. Next, knit 8 rows of faces. n. in a circle. Then we alternate 3 rows of burgundy, 3 color. In the next burgundy row, decrease as follows: divide the work into 4 parts and decrease 2 sts in each row in each part until 8 sts remain on the needle. At the same time, knit 2 color rows after the burgundy row and then another burgundy color. Pull off the remaining 8 sts with a working thread. Crochet the edge of the cap (visor, ears and back of the head) with a colored thread with a “crustacean step”. Turn the visor up, weave ties 6 15 cm long along the openwork row and sew to the ears. "Rach step": Crocheted with single crochets from right to left. Master's advice. When, for one reason or another, there are more loops in the last row than necessary, it is impossible to pull them together so that an ugly hole does not form in the center. The same result can be obtained even with a small number of loops, if the hat is knitted from very thick yarn. To avoid this defect, we recommend doing this. In the front row, knit all the loops, alternating 2 together with the front (purl) and yarn over. Break the thread. Thread the end into the needle and sew only the loops, and drop the yarn over from the knitting needle. Pull the loops tight. As a result elongated loops formed into a beautiful flower. Newspaper "Knitting hats". Scheme

Choosing a headdress for a girl is not an easy task. It should be warm, comfortable, beautiful, in harmony with the rest of the clothes. We suggest you tie it with your own hands. Hat helmet for girls, various options which are presented in this article will appeal to the most fastidious young fashionista.

Pink hat - helmet

The hat-helmet is designed for the girl's age of 2 years.

We have to:

• yarn of mixed composition - wool 20%, acrylic 80%, (50g / 150m) pink - 100g;
• slightly the same thickness of yarn white color- For decoration;
• knitting needles No4;
• hook No4;
• markers;
• buttons - 3 pieces;
• for decoration - beads, glass.

Patterns:

• gum: 1l.x1i.;
• persons. smooth surface: in the front rows - front sts, in out. rows - purl;
• shawl pattern: all sts in all r. - purl.

Description

Cast on 82p. plus 2 edging. We knit a 4 cm elastic band.

Let's move on to faces. stitch and knit 8 cm.

We distribute the loops into three parts: in the central - 26p. the remaining loops - 29 pieces each - in the extreme parts. Markers are placed at the boundaries of the plots.

The further knitting pattern is performed according to the principle of knitting the heel of the sock. We knit loops to the second marker.

We remove the first loop, we knit the rest of the stitches to the marker with purl stitches.

We reach the 2nd marker. We remove the 1st p. of the central part, and we knit the loop of the side part.

We stretch the removed item through the knitted one.

We remove the 1st p., we knit the rest to the marker. satin stitch.

We knit the loop of the central part together with the loop of the side part in 1p.

We turn the canvas over again and continue to work according to this principle until the stitches on the side parts run out.

Hat - helmet has already taken shape:

We raise the loops along the edge edge.

It is correct to do this for the bows of two loops.

The resulting picture - see photo. In total, you need to dial 19p. We fix the edges of the threads.

Cast on 8 sts for button band. We turn over the work. We knit the bar - handkerchief pattern, the rest of the p. - purl.

On this side of the edging, we crochet 19p.

We collect 8p. for the second strap and knit it with a garter pattern. Having knitted three rows, we set markers on the raglan lines. Do not forget in the 2nd p. make holes for the button. Method - see photo.

Lower 2p. close with a hook. Above them we collect new 2p.

Raglan lines

Decide on ragged lines. On the back, they will extend the row of loops obtained by decreasing - in the photo they are marked with yellow markers. Two more lines will be located through 7p. closer to the front. They are marked with blue markers. In the first row of knitting a shirt-front, you can (optionally) evenly decrease 2p on the back.

We make additions in the front rows on both sides of the ragged lines. For the openwork version, we make ordinary crochets. If you make crochets from crossed loops, then there will be no holes. On the wrong side of the yarn, we knit with purl stitches. In principle, you can draw a raglan line in any way that is familiar to you. Our website describes several ways to knit raglan.

Do not forget to do after 6 p. holes for buttons. We knit a shirt-front to a height of 8 cm. Sew on buttons.

Decoration

For a rose, we crochet 31 air stitches (VP).

We knit 6ch. In the 6th VP we knit a double crochet (CCH).

Then 1VP, in the 3rd loop we knit two CCH. Between them -2VP. So we repeat on all points of the row.

2p .: we collect 3VP, in the arch we knit SSN, 2VP, 2SSN, 1VP, etc. on all the loops of the row.

We put into work white thread. For smooth transition We knit the last loop of the CCH in white.

3r .: we collect 3VP, then in the arch 3SN, a fixing column between the arches, in the next three arches in 6SN. Do not forget about the fixing posts between the arches. In the next 2 arches 8 CCH. In all other arches, 10 CCH.

We fold the flower and sew.

We decorate the flower with beads and glass. Sew to the hat.

Cap-helmet with a jacquard pattern: video master class

hat helmet with flowers

Girth of the girl's head 46-48cm.

We have to:

• mixed yarn (wool + acrylic) white - 100g;
• knitting needles No3.

Patterns:

• gum: 1l.x1i.;
• persons. smooth surface: in the front rows - front loops, in out. rows - purl;

Description

We collect 90p. We knit 10 cm elastic bands. Let's move on to the front. We knit approximately 14 cm (specify by fitting). We divide the entire number of points into 3 parts of 30p. in each. We continue according to the principle of knitting the heel of the sock. The process is described in more detail in the previous model. We knit a shirt-front of the desired length. Do not forget to dial the loops for the button placket for three buttons. Knitting a shirt front, button strips and raglan lines - see the previous master class.

We make decoration from flowers, as shown in the photo.

Sew the flowers to the hat.

Hat - a helmet for a baby

This warm winter hat is designed for a head circumference of 45-48cm.

We need:

• yarn of any composition - about 100g;
• knitting needles No. 3.5;
• add. spoke;
• loop holder;
• markers.

Pattern:

• gum 2l.x2i.

Description

Cast on 44p. (including two - edging). We carry out 28r. elastic bands and set aside the loops without closing. This will be the front of the hat. Cast on 44p. and knit 38r. rubber bands - this will be the back. We connect the two parts and knit around 20r.

14p. the center of the front part is transplanted onto the holder and left for now. On the sides in each even row (i.e., on the wrong side), we make decreases. 60p. + 2kr should remain on the knitting needles. We continue to evenly knit a hat to the desired height.

It's about 15cm. We knit the crown according to the principle of the toe heel. We divide 60p. into three parts of 20 pieces Edge stitches remain in place.

Having connected the top of the head, we proceed to the implementation of the rubber band along the oval. We raise the loops on the sides, we turn on the previously set aside 14p. center. Round knit 8r. rubber bands. We close the item. We make 2 pompoms and sew them on - see photo.

Hat-helmet "Snowflake" crochet and knitting needles: video mk for beginners

Hat - helmet with braids

Head circumference: 44-46cm.

We need:

• yarn, composed of 50% wool, 50% acrylic (392m per 100g) - 100g;
• circular knitting needles No3;
• set of socks No3;
• auxiliary spoke;
• hook No2.

Patterns:

• gum: 2l.x2i.;
• persons. smooth surface: with direct / reverse knitting in persons. rows - facial sts, in out. R. - purl; when knitting in the round - only facial stitches;
• garter stitch: with straight / reverse knitting - all stitches are facial; when working in a circle, we alternate a row of facial stitches with a row of purl stitches;
• braid 1 - see diagram 1;
• braid 2 - see diagram 2;
• rhombus - see diagram 3.

The diagrams show faces. rows, on the inside we knit according to the pattern.

Density: on persons. iron 25p. for 30r. are equal to 10 cm by 10 cm.

Description

We collect 112p., Distribute in equal parts to 4 toe sp. and knit 20r. rubber bands. Next, set aside 24p. to the auxiliary The rest of the items are distributed as follows: 1 cr., braid 1 - repeat 6 times, 16p. - rhombus, braid 2 - repeat 6 times, 1 cr. According to this scheme, we knit with direct / reverse knitting 13cm. Then we knit by analogy with the heel of the sock: 1 cr., 57p. according to the drawing, and we knit the 57th p. and the 58th p. in 1l. We expand the work, we knit 24p. according to the drawing, and we knit the 24th p. and the 25th p. in 1 out.

We expand the work, knit 24p again. middle, completing a decrease at the end. Continue like this until the loops of the side parts are over. Then we raise along the edges of the item from the braids, distribute them into 4 toe sp. and knit around 20r. rubber bands. We close the loops. Sew the elastic inside.

We proceed to work on the lower part of the helmet. Cast on 112 sts along the edge of the elastic. We distribute them on 4 knitting needles in equal numbers. We knit the sides of the faces. satin stitch, and we knit the front and back like this: 1l., 1i., 4p. - braid 1, 16p. - rhombus, 4p. - braid 1, 1i., 1l. To expand, add 1p. from the broach after the 1st and before the last loops in every 3rd row. On the back and front of the added loops, knit faces. satin stitch.

So we knit 10cm. Then on the sides we knit 4p. with a scarf pattern, close the stitch. We continue to knit the loops of the back and front parts in straight / reverse rows. In every even r. we make decreases: 7 times for 2p., 2 times for 3p. We close the rest of the items. We tie the edges with a crochet step.

Hat helmet with aran - two variations of one model

Dimensions: models are calculated for the age of the child 3 (6/12) 18/24 months.

For the red hat we will need:

For a white hat we will need:

• yarn, composed of 30% wool, 70% acrylic (50g per 84m) - 50g (50g) 100g.
• yarn, 100% polyester, (50g per 86m) - 50g each for all sizes.

For both hats:

• threads for sewing in the color of the yarn;
• knitting needles No4;
• add. knitting needles -2 pcs.;
• markers;
• pin or holder.

Patterns:

• gum: 1l.1i .;
• gum: 2l.x2i.;
• fantasy pattern - see diagram:

Dimensions on different age child; 1/3; 6/9; 12/18 months; 2; 3⁄4 years.

Head circumference child 40/42; 42/44; 44/46; 48/50; 50/52.

We will need:

• yarn, 100% wool, - 150; 150; 150; 200; 200g;
• circular knitting needles No. 4.5;
• a set of stocking knitting needles No. 4.5.

Patterns:

• garter stitch: with circular knitting, alternate 1p. facial loops with 1p. purl sts;
• stocking knitting: with circular knitting, all stitches are facial.

Density: stocking knitting needles No. 4.5 yarn in two additions 18p. for 23r. are equal to 10 cm by 10 cm.

Description

Hat - a hat is knitted round from the bottom up.

Recruiting 144; 153; 162; 180; 198p. yarn in two threads with knitting needles No. 4.5. We knit faces. p. 8 p. scarf pattern. Further with a pattern: * 7i., 2l. * - from * to * repeat for the entire row. Having knitted 3; 4; 4; 5; 5 cm in areas of out. we decrease the loops by 1p., knitting the first 2i. in 1i. We have 128; 136; 144; 160; 176p. We repeat the decrease through 1 row only four times. Remains 64; 68; 72:80; 88p. At this point, the pattern turns into an elastic band 2i.x2l. We knitted in height 7; 8; 8; 9; 9cm Continue to height 11; 12; 13; 14; 15 cm and mark with a contrasting thread the middle of the front and back. We measure knitting from here. We continue with stocking knitting. Having knitted from marks 1; 2; 2; 3; 4cm translate 10; 10; 12; 12; 14p. in the middle of the front on the thread.

We knit with direct / reverse knitting, while decreasing 1p. on each side through 1 row only 2; 2; 2; 3; 4 times. At the same time add 1p. on both sides of the marking thread in the middle of the back through 1 row, 4 in total; 4; 4; 5; 5 times. After all the deductions and increases, we have 58; 62; 64; 72; 76p. Having knitted 11; 12; 13; 14; 15 cm, we add on each side towards the middle of the front part through 1 row, 1 p. 4; 4; 4; 5; 5 times.

Now we dial 6; 6; 8; 8; 12p. towards the middle of the front of the deferred p. Received 72; 76; 80; 90; 98p. We continue knitting in the round. At 19; 21; 22; 24; 26 cm from the mark with a thread, close the p.

Assembly

Fold the hat in half and carefully sew the top seam. Raise the stitch around the hole for the face, turn on the loops from the thread. Total 68-88p. We knit 1 row. purl sts, then 1p. facial. We pass to an elastic band 2l.x2i. Having knitted 4; 4; 5; 5; 6 cm, close the item according to the drawing. Fold the strap in half and sew to the wrong side.

Among the variety of hats for the boy to choose suitable model sometimes becomes a difficult task. After all, the hat should be suitable for the season, in cool weather it is imperative to cover the ears of the child. In addition, the cap should be combined in style and color with the rest. outerwear. In this case, a do-it-yourself knitted hat for a boy will help solve this problem. We offer you simple and original models such hats.

Gray helmet for a boy - a simple model

Designed for a head circumference of 52-54cm.

We will need:

• yarn, 100% wool (50g per 150m) - 75g;
• circular knitting needles No3.

Patterns:

• gum: 2l.x2i.;
• persons. smooth surface: with circular knitting, all loops are facial.

Description

Cast on 152p. and knit in the round with knitting needles. At 14 cm of the height of the canvas, we close 54p. for cutout. Then we continue with direct / reverse knitting. Knit 12 cm and cast on 54 stitches. over previously closed ones. Again we return to circular knitting. Having completed 8 cm, we proceed to the reductions. Divide all p. into 10 equal parts and move on to faces. smooth surface. In every 2nd p. subtract 1p. in each of the 10 parts. When 10p remains in work. we break the thread, stretch it through the remaining stitches, pull it together, bring it to the wrong side, fix it. The neckline will look neater if you crochet it with two rows of double crochets.

Beanie helmet for a baby: video master class

Knitted hat-helmet with appliqué for a boy

Cap size for head circumference 40-44cm.

We will need:

• yarn, 100% sheep wool, (50g per 100m) - 50g;
• straight knitting needles No3.5;
• a set of stocking knitting needles No3.5;
• hook No3.5;
• lining fabric, plush is better;
• button Ø 2cm;
• application.

Patterns:

• persons. smooth surface: with direct / reverse knitting in persons. R. - facial p., in out. R. - purl; when knitting in the round - all stitches are facial;
• garter stitch: with straight / reverse knitting in all rivers. all p. facial; when knitting in the round, alternate 1p. persons. n. from 1r. out. P.

Density: on persons. iron 24p. for 30r. are equal to 10 cm by 10 cm.

Description

We start knitting a helmet with a set of knitting needles 92p. The distribution scheme is as follows: the first 56p. - the back of the cap, we perform it on the faces. satin stitch, the rest 36p. - fastener strap, we knit it with a garter stitch. We work with direct / reverse knitting. In the 3rd r. perform additions: 1 cr., add 1p. from broach, 8l., 1 increase, 1l., 1 increase, 36l., 1 increase, 1l., 1 increase, 8l., 1 increase, 1l., 36p. kerchief pattern. This increase scheme should be repeated twice more in each even p. Please note that the 1st increase is always performed after the chrome. p., *next. increase - before the next. added, trace. increase - after the next. added. From * repeat once. We make the last increase in front of the loops of the shawl pattern. At the same time, we close the holes for the buttons in the 3rd p. 29th, 30th and 31st p. fastener straps. Following. R. over them we collect new 3p. By tying another 7p. straps, close all 36p. On the remaining points, we perform faces with direct / reverse knitting. smooth surface. Having knitted 8cm, we have 74p in work. Cast on 30 sts for the front of the hat. and go to circular knitting. The first 8 from the dialed p. we knit a scarf pattern, the rest of the loops are faces. ch. Further on all 104p. knit in the round with knitting needles. ch. The beginning of the row is the first st after the scarf pattern. Having knitted 15 cm, we mark the 1st, 26th, 27th, 52nd, 53rd, 78th, 79th, 204th p. In each even p. before each of the marked points, we make two decreases: 2p. in 1l., 2p. in 1l. broach (1p. remove, 1l., stretch it through the removed one). When 8p remains in the work, we break the thread, thread it through the p., pull it together. We tie the edge of the cap, including the strap, with single crochets. We cut out the lining from the fabric, sew it on. Sew on button and appliqué. Helmet is ready!

Hat - helmet with braids

This cute model is calculated in several sizes, for a boy of age from 0 to 6 months, from 6 to 12 months, from 1 year to 2 years, from 2 years to 3 years. Accordingly, the head circumference of the child is 34; 37; 40; 44cm

We will need:

• mixed yarn: 75% wool, 20% silk; 5% cashmere, (50g per 116m) - 50; 100; 100; 100g;
• straight knitting needles No3.5 and No4;
• circular knitting needles No3.5 and No4;
• buttons - 3 pcs.

Patterns:

• garter stitch: with straight / reverse knitting, all stitches in all rows are facial; when knitting in the round, alternate 1p. facial sts with 1r. purl;
• braid on 4p. right: transfer 2p. for additional knitting needle for work, 2l., we knit 2p. with add. knitting needles;
• braid on 4p. to the left: transfer 2p. for additional knitting needle before work, 2l., we knit 2p. with add. knitting needles.

Density: 22p. for 28r. knitting needles No. 4 are equal to 10 cm by 10 cm.

Description

Ears

We begin to knit a helmet for a boy from the ears. With knitting needles No3.5 we collect 5p. and knit with a shawl pattern. Having knitted 4 rows, we make a loop for a button. To do this, we knit 2l., 1n., 2p. in 1l., 1l. We continue knitting with facial stitches. Having knitted 12 cm, on both sides we collect 1 stitch. We repeat this additional set in every 2nd p. 1 time and in every 4th p. twice. We get 13p. Having knitted without increments to the desired length (determined by fitting, because the oval of the face is individual for each child), set aside the item. We knit the second eye in the same way, but without a hole for the loop.

Visor

We collect with knitting needles No3.5 31; 33; 35; 37p. and knit a scarf pattern. In the second r. we knit with knitting needles according to the scheme: 1l., 2p. in 1l., continue with facial to the extreme 3p., 2p. in 1l., 1l. We continue with a garter pattern to a height of 6; 6; 7; 7cm We postpone p.

The main part of the hat

Knitting needles No3.5 we collect 11; 13; 16; 19p., transfer to working needle 13l. the first ear, then the loops of the visor (their order should be as follows: 1l., 2p. In 1l., 23; 25; 27; 29p., 2p. In 1l., 1l.). Then we transfer the loops of the second ear to the working knitting needle. After them we dial 11; 13; 16; 19p. We turn to circular knitting and knit 4; 4; 5; 5cm high. In the next row, we make uniform increases until the total number of loops is 98; 105; 119; 133p. Next, a hat - a helmet will be made with No. 4 knitting needles. The order of work is this:

1r .: * 4l., 3i. * - from * to * we repeat for the whole row;

2p .: according to the drawing;

3p.: * 4p. - braid to the right, 3i. * - from * to * repeat for the entire row;

from the 4th to the 8th p.: according to the drawing;

9p.: * 4p. braid to the left, 3i. * - from * to * repeat for the entire row;

When the cap is 11; 12; 12; 13 cm high, we begin to reduce the loops. To do this, we knit 2p. in 1i. on the purl sections - it turns out an alternation of 4l., 2i. Following. in a row in the areas of the front stitches we knit 2 stitches. in 1l. - it turns out the alternation of 3l., 2i. Track. row - according to the figure. Track. row - again 2l. we knit in 1l. - we get the alternation of 2l., 2i. Track. row - according to the figure. Following. row of 2. we knit 1i. - we get the alternation of 2l., 1i. Track. row - according to the figure. Following. a row of 2l. we knit 1l. - we get the alternation of 1l., 1i. Following. a row of 1 l. and 1i. we knit 1l. Track. row - according to the figure. In the last r. we break the thread, thread it through the remaining stitches, pull it together, bring it to the wrong side and fasten it.

Assembly

We wrap the visor up, fix it with two buttons on the hat. Sew the third button on the edge of the ear.

Hat-helmet knitting. How to tie a hat at the same time as a bib: video for beginners

The helmet has long ceased to be the prerogative of exclusively skiing. Today it is actively used as a hat for everyday wear, because it has no equal in terms of warmth and comfort. Modern mothers are increasingly buying helmets for their babies and for good reason. In such a headdress, the ears and forehead, cheeks and neck will always be closed.

Unfortunately, the price of children's helmets is higher than regular hats. Often this is due to the fact that knitting a helmet is always used large quantity wool than for other headdresses. Manufacturers often make mistakes. high price because of the exclusive models of their hats. But all this does not play a big role if you know how to knit a hat-helmet. There are many diagrams and descriptions of such products. They are a combination of a hat and shirt-front, and can differ in a wide variety of designs.

How to knit a classic hat hat?

It is a model without any frills or decor. You should start knitting the product by measuring the girth of the head, selecting wool and knitting needles. For the winter, you need to knit a hat made of warm threads, and wool is considered the warmest. Sheep's wool it can prick, so it is best to take merino or mix woolen threads with acrylic ones. The size of the knitting needles depends on the size of the knitting; circular knitting needles number 3 are suitable for a classic helmet.

If you need to knit a hat-helmet for a boy, you won’t need a pattern, since knitting this hat is quite simple. Such a helmet is knitted according to the “gum” type, that is, every 2 loops the direction changes from front to back, and vice versa. The number of loops is dialed according to the girth of the child's head. So, for example, if the measurements showed 52 cm, you will need 100 more loops, that is, 152. Having typed the right amount, you can start knitting an elastic band in a circle. When the length of the knitting reaches 14 cm, the first 54 loops should be cast off, a cutout will be formed there. Further knitting does not go round, it must be directed forward, and then back.

In this way, it is necessary to knit another 12 cm, after which replenish the loops in the same amount in which they were taken. Then knitting again moves in a circle. When 8 cm passes after dialing, you need to reset the loops, leaving them only 78.

From the remaining amount, 10 equal parts should be formed, after which you can begin to knit the front surface. In this process, every 2nd row must be reduced in the form of one loop. When ten loops remain, they will need to be pulled together with a pair of thread and hidden on the wrong side of the product. For beauty, the neckline of the helmet can be crocheted.

Double hat hat: knitting method

• The double knit boy's hat is easy to make and the hat is very warm. The inner part is most often knitted from acrylic threads, and the upper part is made from wool. For knitting, you will need circular knitting needles of the 1.5th and 3rd numbers. Begin knitting with purl loops in a small amount, and in each front row add no more than 12 loops. It is necessary to select 5 main loops, next to which new ones will be added. On each side of the main loop, you need to add another 1, and so knit 8 cm.
• Then the knitting turns into the front surface. It should consist of 52 rows. After that, you can start knitting the area of ​​\u200b\u200bthe ears and the back. Starting from the back seam, 40 loops are knitted on all sides, 60 are required for the forehead. Then a couple of loops are cut on each front row. You need to do this about 6 times. Each stage of adding or reducing loops must be supported by fitting on a child, so as not to miscalculate in size.
• With the help of one and a half knitting needles, loops for the face are typed. First, a purl row is knitted along the front row, and then several rows with the usual “elastic band”. It will take about 10 rows, but if a double hat is supposed, they do not need to be closed yet.
• The next step is knitting a shirt-front. In the area of ​​\u200b\u200bthe chin, you need to dial 20 loops from the front area. They need to be connected with the rest of the loops and knit stockinette stitch. In this way, you need to knit to the desired length.
• Both parts of the hat are knitted in the same way only from different threads. When they are ready, an inner helmet is inserted into the middle and both parts are connected along ragged lines. The essence of the connection is knitting with an "elastic band", when 1 loop is knitted, and the 2nd is removed from the other knitting needle.

A hat-helmet is a beautiful and unusual headdress. It is very warm in it, it does not move out and does not constrain movements. When knitting, the helmet can be decorated with a pattern of contrasting threads or decorated with pompoms. In such a cap, your child will be irresistible, and you will be calm for his comfort and warmth.

Forecasters promise cold winter! Well, you need to get ready ... If you are looking for a warm hat-helmet with a shirt-front for a boy, I think you have found what you need.

Yarn Peter Pan Wendy composition: 55 nylon (polyamide) 45 acrylic. 50 gr - 170 meters.

Recommended needles number 3 1/4 - 4. It took exactly 100 grams (2 skeins) for the helmet. I knitted in 2 threads with knitting needles number 3 very tightly, I was afraid that it would stretch, but I did not take into account that this was not pure acrylic, after washing it almost did not stretch. The helmet turned out to be very tight and hard, barely pulled on. Softer after washing with conditioner. I advise you to knit with needles number 4 and medium density, do not tighten much.

The advice is for this yarn in two additions and the calculation of the loops in the description.

Wonderful master class by Oksana Andrusenko. The boy in this helmet looks like Batman.

Yarn: Peter Pan Wendy composition: 55 nylon (polyamide) 45 acrylic. 50 gr - 170 meters. It took exactly 100 grams (2 skeins) for the helmet.

I knitted in 2 threads with knitting needles number 3 very tightly, I was afraid that it would stretch, but I did not take into account that this was not pure acrylic, after washing it almost did not stretch. The helmet turned out to be very tight and hard, barely pulled on. Softer after washing with conditioner.

I advise you to knit with needles number 4 and medium density, do not tighten much. The advice is to this yarn in two additions and to the calculation of the loops given in the description.

We start knitting from the top wedge.

We measure the distance from the tips of the child's eyebrows, multiply by the number of loops in 1 cm plus 2 edge loops.
The hem is obtained one for 2 rows: At the beginning of the row, remove untied, at the end, purl.
If it is difficult to knit a double elastic band, you can replace it with several rows garter stitch and loops to dial in any simple way.
For a helmet with stripes, I cast on 35 loops.

It is this version of the helmet that is connected without ears. If ears are needed, then after 15 cm we continue to knit further (without shortened rows), we knit 6 more rows (3 facial ones with all increases and decreases + 3 purl) and immediately pick up loops from the hem 3 in each row.

If the back of the head is not very pronounced in a child, you can make fewer reductions 4-6. Why the lower wedge is knitted precisely from the line of the lips - the wedge will stretch over the chin, compensate for the missing length and provide a snug fit on the ears and neck.

Explanation for photo No. 15: For the lower wedge of the last striped helmet, cast on 25 loops, plus 2 edge loops will also go here, it turns out 27 loops for the lower wedge.

When decreasing on an elastic band, you need to take into account the girth of the head, so that it would not be very tight, otherwise the head will not crawl through. In place of the wedge, I do not make any reductions, we use the wedge to pull on the spout in cold weather, for this it should be more free. If this function is not needed, you can make reductions on the wedge, but do not forget about the volume of the head.

The shirt-front can be knitted longer, but then it will take more than 150 grams of yarn.
It was this option that took 100 gr.