How to crochet elongated loops: photos, examples, description. Crochet elongated loop Crochet elongated loops diagram description

We have already mastered several useful crochet lessons with you, let's start a new one. Today we will talk about knitting stretched loops with a hook. I want to present to your attention three options for making elongated loops with fingers, a bar and a grip.

Method one: elongated loops on the index finger

• Run the first row with single crochets, how to knit a single crochet, we have already gone through with you.
• In the second row, we begin knitting the elongated loops, doing it as follows, insert the head of the hook into the first loop of the base. Throw the thread on the left index finger, pick up the thread under the finger with a hook.
• Pull a new loop through the next base loop.
• Yarn over the hook again and pull it through both loops on the hook with a single crochet.
• Repeat all of the above until the end of the row.

Method two: elongated loops with a strap

• For this knitting method, it is necessary to make or select a bar according to the desired knitting width of the row and the height of the future elongated loop.
• Further, as in the first case, we knit the first row with single crochets.
• Second row: insert the hook into the first loop of the base, throw the thread over the bar away from you.
• Catch the thread from the bottom of the strap with a hook and stretch it through the loop of the base.
• Yarn over the hook and end the loop with a single crochet.
• Repeat all steps until the end of the row.

Method three: elongated loops with a grip

• For this method, as for the second, some preparation is needed. Prepare thread.
• Fold the cardboard rectangle in half in length, the initial size of the rectangle is eighteen centimeters by five centimeters.
• Wrap the cardboard blank with a thread in one row.
• Cut the thread along the top edge of the cardboard.
• Insert the hook into the loop of the base, grab the cut thread from the wrong side of the work.
• Pull the loop through the base loop.
• Insert your hook into the base loop above the first loop.
• Grab the ends of the cut thread and pull them through the already pulled loop.
• Tighten the loop by pulling the free ends of the threads with your hand.

This method is considered the simplest of all the ways to knit such loops.

In contact with

Classmates

»

Master class on knitting mittens with five stocking needles. Seamless circular knitting will help create the perfect fabric. Consider the classic knitting method, which will be the basis for further variations of mittens.

»

Spring is a great time for renewal and our men are no exception. How to update your wardrobe without any special expenses and please your loved one with a new thing created by with my own hands. Such a set can be presented as a gift for Defenders of the Fatherland Day to someone you know, close or not very close relatives.

»

Summer dress with a simple cut, in the form of a trapezoid, with a geometric pattern in the form of an openwork insert. Due to the use of cotton yarn, the dress for the girl turns out to be light, soft, and due to the pattern of openwork inserts, it is very beautiful.

Knitting masters love to reproduce their masterpieces not only with knitting needles, but also with a crochet. It is the hook that helps to create beautiful and original elements of clothing, decor and even accessories. This device helps to create unusual patterns that will appeal to any fashionista. To work and perform complex patterns, you need to be able to select a hook and thread. You need to know what size is needed for the product, and stick to the master class.

Sometimes beginner knitters have difficulty knitting elongated loops. Elongated - they are also lowered or dropped loops - are used in knitting for vertical or horizontal openwork paths. They are crocheted like fur, if you use them correctly, you can get a wide variety of products - from furry toys to washcloths and hats - you can’t list all the options, for example, if you knit several rows along the bar, collar and cuffs, on a children’s blouse it turns out a funny "fur" trim. The basic knitting with elongated loops turns out to be quite dense, so many knitters alternate rows of elongated loops with rows of regular columns. So that you can easily learn how to crochet elongated loops - detailed instructions and helpful video.

One of the favorite and popular ways of knitting is - knitting elongated loops crochet. The pattern in this pattern is beautiful. Quite often, borders, furs, fringes, cuffs, collars and hats are knitted in this technique. Particular attention should be paid to knitting long patterns and lace motifs. Pulling loops is not difficult, and the result is worth it to do it at your leisure. We present to your attention knitting in the style of elongated crochet loops, a master class is attached:

1. you need to execute the initial chain from air loops. After knitting several columns without a crochet;
2. you need to start the next row with one air, and then thread it into the second, which is at the base. Grab the thread and wind it on the right side;
3. at the beginning of the next row, knit one air and crochet again into the second at the base. Then pick up the thread that is below your index finger;
4. continue to first thread, and then pull into the second at the base. Thus, you will be able to make a long row consisting of three repetitions.

It is worth paying attention to the fact that one of the long ones is pulled out on the wrong side of the future canvas. You need to do the following with it: remove it from your finger, grab the thread with a hook and pull it through the three loops that you got according to the scheme.

Turning the canvas over, you can notice that on the wrong side of the canvas you will see an elongated one, which is firmly fixed in this place and will not move anywhere. As a result, you will get a beautiful pattern.

Crocheting elongated loops is a rather entertaining, but lengthy process. Worth getting started knitting the second loop:

Thus, knit a long row of elongated loops to the very end. After the row is completed, turn the work over. Knit the next row with simple single crochets. Next, alternate columns with elongated ones. You can knit as many repetitions as you need until the very end.

Learning to crochet according to the scheme is quite easy. The main thing is to follow the necessary instructions clearly, step by step. The work must be done carefully. Important rule - is to knit the required number of loops in the following order: one row is a single crochet, the other row is elongated loops. You need to knit until you reach a certain number of repetitions.

It is important to know how to make elongated loops of the same size. To do this, use a pencil or ruler. If you knit a fur product using this technique, you can always cut the loops, and then you will get a magnificent product.

A variety of products from elongated loops

One of the most beautiful products, which can be performed in this way and according to the scheme - this is lace knitting. In this way, crossing, skipping and other techniques, you can make unique lace and openwork.

Many craftsmen crochet pompoms for children's scarves, make rugs self made for home. Even needlewomen can thus make a natural, homemade ecological washcloth. Washcloths of this manufacture in Lately are used in a huge way, they even have a massage effect.

To tie a washcloth for yourself, a child or for sale, you should choose several colors of polypropylene threads, and then proceed according to the proposed scheme:

1. the first row is a single crochet;
2. second row - elongated;
3. knit to the end of the product.

It is worth paying attention to the fact that polypropylene threads are one of the capricious materials, so if you are knitting from them for the first time, do not be upset, might not work the first time. To achieve maximum results, it is worth purchasing threads in accordance with the thickness of the hook. It will be important to know that the hook is best used with a rounded end.

The most important condition and secret that is best observed when mastering the techniques of knitting elongated loops is that you should never quit what you started! Only a product connected from the beginning to the very end will be able to please you with its beauty and extraordinary application. Having studied this technique, you can easily decorate your home and make many unusual decorations and toys.

Crochet is a very popular type of needlework, crocheted the products turn out to be very beautiful and stylish, especially original if you tie them in a circle. A lot of things are knitted with elongated loops, and even for a washcloth there are interesting schemes. In today's master class, we will look at how to crochet such loops.

Knitting technique

With the help of a hand

First you need to make a line of air loops. Further, if the loops are in the center of the knitted product, then the previous link of work is used. The thread is directed towards itself with the help of the thumb and remains on the finger. The thread is carefully captured with a hook and a loop is made, as when knitting stbn, a thread in the form of a loop remains in front of the tie, as a result, an elongated loop has formed.

You can also knit with the help of your index finger: a thread is taken and wrapped around it, then the tying goes, as in the above method of work.

Crocheted loops

This method is for more experienced knitters, since when knitting, the loops can turn out to be uneven and look different and not even, but sometimes knitting is acceptable. different loops and then mating can go in this way. To crochet, an elongated loop is pulled, while working, the product is held by hand and then a simple single crochet column is made, that is, loops with a large top are knitted.

With the help of tools

To perform this method, some items are needed: a ruler, stick or pencil, that is, absolutely any object whose circumference is equal to the height of the loop. The thread, which is in work, pounces on this object and is not removed from there during the knitting of this link or the required number of loops. The work proceeds in the same way as when knitting only by hand. The thread in the work is hooked and performed simple method, and then again removed from the canvas. As a result, a fringe is formed, these are elongated loops.

With fixation in the previous rows

For decoration, the knitting method is used, when the thread of the working row is inserted into one of the previous rows. Very original and interesting way mating with the fact that the results of the work look like decorations.

The initial few loops are worked out according to the pattern, then the thread that is in work is crocheted to such a length that it is enough for the row in which the fixation is going. The hook with the loop is sent to the loop of the row, then it stretches to the outer part and is knitted. As a result, a vertical strip is formed, it is also an elongated loop. It comes out in an original way if you direct the hook not down into the link, but shift it two or three loops in any direction.

Such loops are used not only in decor, but also in knitting entire independent and single products. From what size the loop will be, there are wide or narrow rows. During the execution of such knitting, all individual rows are performed with elongated loops - then a double-sided product is formed with the edges of the columns, but it can also be knitted in rotary rows, making one part as the front. To do this, the wrong side is made with any loop - stbn, stsn or several, and elongated loops are knitted on the outside.

They use such loops both in the decoration of blouses, jumpers, sundresses or other things, and perfectly and beautifully complement knitted ammigurumi, bags, shoes or baby booties look original. They carry out things useful in everyday life with these loops, for example, potholders or washcloths.

How to crochet a washcloth with elongated loops

We will need:

Yarn: it is better to choose denser and natural yarn, such yarn will last longer and will not deteriorate. Hemp fiber, nettle or 100% synthetic is great.

A very convenient way to knit washcloths is in a circle. First, we collect nine air loops and then close in a ring. Inside the ring, we perform sixteen columns with two crochets. Then we make additions according to this principle: in each loop in the next row - in every second loop and so on. We make additions until the required diameter is reached.

Now we begin to perform reductions or we connect two circles in advance with ordinary columns. The loop for the hand is knitted with double crochets. Five chain stitches are cast on and knitted in swivel rows. The loop is sewn with the same thread to the washcloth.

As you can see, knitting elongated loops is quite simple and over time it will turn out faster and more accurately. You can even knit toys with this method, which can not only be given to different holidays, but also beautifully and stylishly decorate the interior with them.

Enjoy your creativity and beautiful and even loops!

Video on the topic of the article

Fur, fringe, boucle, curls - this is how crocheting of elongated loops is called in different ways - a knitting technique that is indispensable for creating fluffy elements that require the presence of a "pile". Scarves, mittens, booties can be decorated with fringe or made entirely curly. A hat knitted with such a pattern will resemble fur. Pillowcase will turn out soft and cozy for decorative pillow or plaid. Such loops will become an original element when used in the design of bags. Well, the fans knitted toys they know firsthand that with their help, for example, ideal curls of dolls and lambs, thorns of hedgehogs and Christmas trees are created.

Features and tricks

There is also a more mundane, “technical” designation for this technique - elongated or long loops. This type of knitting is not difficult even for beginner craftswomen, though it will require some skill and skill.

There are some nuances that need to be taken into account, then the canvas with “curls” will turn out to be even and beautiful:

• it is necessary to “lengthen” all the loops by the same length, otherwise the canvas will look sloppy;
• "Curls" should always be located on one side of the product. It means that when knitting such a pattern, you need to alternate rows with long loops and rows of workers (usually simple single crochets).

First of all, this knitting technique is ideal for a washcloth. Yes, it is in this way that cheerful colored nylon “hedgehogs” are knitted, which hang in clusters on the counters of crafty grandmothers. Perhaps the easiest way to start your acquaintance with long loops is to make such an accessory for the shower. The stiffness of the bast depends on the thickness and composition of the threads, as well as on the density of knitting.

There are several ways to knit a boucle. The following videos will help you visually introduce them and choose the most convenient and simple one:

curly hedgehog

As noted above, the fur technique is extremely popular among lovers of knitting toys. Below is a master class on creating a lovely hedgehog with curly “needles”, which will appeal not only to any kid, but also to an adult, reminding of childhood.

To knit such an animal, just a small skein of woolen yarn (the author uses Derevenka yarn) in warm natural shades is enough.

Getting started, you must have:

• woolen yarn of two shades of the same color (for example, natural gray and dark);
• quite a bit of black for the nose;
• brown for knitting "needles", the yarn number is similar to the main threads;
• hook number 2;
• 2 plastic eyes for legged toys;
• needle and thread for stitching the product;
• scissors;
• stuffing material;
• threads for a scarf at will (one, two or as many colors as you like).

Head

We start knitting with a black thread, that is, from the tip of the nose of the toy:

Change the yarn to dark gray.

3 row: 9Ϯ; 4 row: * 2Ϯ, increase *, ** X 3 times (12 loops in total); 5 row: 12Ϯ; 6 row: * 3Ϯ, increase *, ** X 3 times (15 loops in total); 7 row: 15Ϯ; 8 row: * 4Ϯ, increase *, ** X 3 times (18 loops in total); 9 row: * 2Ϯ, increase *, ** X 6 times (24 loops in total); 10 row: 24Ϯ; 11 row: * 3Ϯ, increase *, ** X 6 times (30 loops in total).

12 row: 30Ϯ; 13 row: * 4Ϯ, increase *, ** X 6 times (total 36 loops); 14 row: * 5Ϯ, increase *, ** X 6 times (42 loops in total); 15 row: * 6Ϯ, increase *, ** X 6 times (48 loops in total); 16th and 17th rows: 48Ϯ.

18 row: * 6Ϯ, decrease *, ** X 6 times (42 loops in total); 19 row: * 5Ϯ, decrease *, ** X 6 times (total 36 loops); 20 row: * 4Ϯ, decrease *, ** X 6 times (30 loops in total); 21 row: 30Ϯ; 22 row: * 3Ϯ, decrease *, ** X 6 times (24 loops in total).

Between the 11th and 12th rows we fix the eyes. We fill the head with filler.

23 row: * 2Ϯ, decrease *, ** X 6 times (18 loops in total); 24 row: * 1Ϯ, decrease *, ** X 6 times (12 loops in total).

We add stuffing material and, reducing the loops, completely close the hole.

torso

The body will be knitted with dark gray yarn.

1 row: we close 6 air loops in a ring with amigurami; 2 row: increase X 6 times (total 12 loops); 3 row: * 1Ϯ, increase *, ** X 6 times (18 loops in total); 4 row: * 2Ϯ, increase *, ** X 6 times (24 loops in total); 5 row: * 3Ϯ, increase *, ** X 6 times (total 30 loops); 6 row: * 4Ϯ, increase *, ** X 6 times (36 loops in total); 7 row: * 5Ϯ, increase *, ** X 6 times (42 loops in total); 8-13 rows - 42Ϯ; 14 row: * 5Ϯ, decrease *, ** X 6 times (total 36 loops); 15 row: 36Ϯ; 16 row: * 4Ϯ, decrease *, ** X 6 times (30 loops in total); 17 row: 30Ϯ; 18 row: * 3Ϯ, decrease *, ** X 6 times (24 loops in total); 19 row: 24Ϯ; 20 row: * 2Ϯ, decrease *, ** X 6 times (18 loops in total).

We stuff the body.

Handles-legs

1 row: we connect 6 air loops into a ring, as in the previous descriptions; 2 row: increase X 6 times (total 12 loops); 3 row: * 3Ϯ, increase *, ** X 3 times (15 loops in total); 4-5 rows: 15Ϯ; 6 row: * 3Ϯ, decrease *, ** X 3 times (12 loops in total); 7-9 rows: 12Ϯ; 10 row: * 2Ϯ, decrease *, ** X 3 times (total 9 loops); 11-12 row: 9Ϯ.

Reduce until the holes are completely closed. We knit the paws according to the same pattern. For the upper ones, we knit all 12 rows, stuff and close the hole. For the lower ones - 10 rows, we sew without stuffing, we flatten with our fingers, we form fingers with a coupler with threads.

Needles on the head (hat)

For the "hairstyle" of our toy is most suitable melange yarn. It has volume and will look more fluffy.

1 row: 6 air loops close in a sliding ring; 2 row: we knit 2 long loops (hereinafter - Ɣ) from each loop of the warp row (12 loops in total) in this way: insert the hook into the loop of the first row, start behind working thread on right. The thread that descends from the finger is pulled through the loop of the row. Yarn over and pull through both loops on the hook. We remove the resulting elongated loop from the finger.

3 row: * 1Ɣ, 2Ɣ (increase) *, ** X 6 (18 loops in total); 4 row: * 2Ɣ, increase *, ** X 6 (24 loops in total); 5 row: * 3Ɣ, increase *, ** X 6 (total 30 loops).

6 row: * 4Ɣ, increase *, ** X 6 (total 36 loops); 7 row: * 5Ɣ, increase *, ** X 6 (total 42 loops); 8-10 rows: 42Ɣ; 11 row: * 5Ɣ, decrease *, ** X 6 (total 36 loops).

Received a hat. Depending on the thickness of the yarn and the density of knitting, it may be necessary to reduce or increase the number of rows. The cap should fit snugly on the head of the toy.

Back

The method of knitting is similar to a hat. We knit the initial 6 rows according to the scheme shown below, then we knit in a circle without increments for another 5-6 rows. In the last row, you can make a few reductions.

Product assembly

Sew a hat on your head. To the body - the head. "Prickles" - to the back. Paws - to the body.

scarf can be knitted stockinette stitch on knitting needles or single crochet stitches, changing the colors of the thread.

A wonderful hedgehog is ready!

With a little practice, you can learn how to knit long loops quickly and evenly, and then, perhaps, you will be able to create with your own hands a real fluffy rug in the bathroom or sweater, in which it will always be warm and cozy.

Video on the topic of the article

How to crochet loops

At the heart of any knitting are loops. Each loop has its own designation and name, also when crocheting. In this type of needlework, the following types of loops can be noted:

• sliding
• initial
• elongated
• aerial
• connective
• Solomonic
• row lifting loops

Let's look at crochet separately:

The initial loop is called the loop with which you start any knitting. It needs to be done in this way:

Working thread, which lies on the left hand of the side of the palm, on the index finger, is picked up by a hook. It must be entered from the right side under the thread, and then the thread is thrown over it. Next, you need to turn the hook from top to bottom and to the right. The thread at this time should wrap the ends of the hook and intertwine with each other. Now we can assume that the first loop is ready.

First loop

Sliding eyelet So called because you can adjust its size. With the help of a sliding loop, you usually need to make a ring, which comes out as the beginning of work when knitting a square, circle or other geometric shapes. Using the two methods below, you can make a sliding loop:

In the sliding loop that you came out with, you need to make columns b / n or others at your discretion. When the row ends, the loop is usually tightened at the end of the thread so that there is no gap in its middle.

Air loops it is an integral part of the initial knitting chain. Thanks to them, you can make various complex drawings. Making them is very easy. If you are making a pigtail that goes at the beginning of knitting, then you need to make the initial loop, then put a working thread on the index finger of your left hand, in order to make it easier. Next, grab the thread with a hook and pass through the first loop. The following air chains must be done in exactly the same way.

Air loop

lifting loops. This is the same as the air loop. They must be knitted in each row at the beginning, for lifting. Such loops are needed so that in the future the product does not warp in one direction, and it has a smooth and beautiful edge.

A connecting loop is usually used to connect the beginning of the next row and the end of the previous one. circular knitting. It is also needed in order for the separately knitted parts of the fabric to be connected. It is necessary to knit a loop according to this pattern. Thread the hook into the loop of the previous row, grab the working thread and pull it through this loop and the loop that is on the hook. Sometimes the connecting loop is called by some connecting half-columns or columns. IN different patterns so a hedgehog I use half-columns. In the following video, you can learn more about how to make a connecting loop:

Extended loop or long loop. Typically, such loops are needed in order to decorate products, such as fringe or border. Long loops can help when working with a pom pom. Such loops are used very often when , also or . And if they are made interspersed in the product, then the loops will be an integral part of one of them. So elongated loops can be made both at the end and at the beginning of the product, or in any other part.

They will help you make beautiful and regular elongated loops:

1. In this method, the loops must be created from the loops of the product. If this is the beginning of work, then from the air chain, and if the middle, then you can knit the loops that you knitted earlier. Let's see in more detail how to do it all. Insert a hook into the loop of the desired product and pull the loop through it, then throw the working thread on the thumb of the left hand, and put the hook under the loop that formed under the finger. As if clasping it again and thread it into the product, from which you need to pull out a new loop. Next, knit together as one those three loops that are on the hook, and the thread that is on thumb recline.

   

   elongated loops

2. In the second method, you need to prepare cardboard. The cardboard should be equal in width to the length of the future elongated loops, and the length of the cardboard is the length of the product itself. Next, you need to throw a working thread on the hook, and then grab the prepared cardboard strip from the back. Then lead the crochet hook into the loop of the product and pull out a new loop. Next, the working thread is again captured by the tool and pulled through the loop and yarn over, which is on the hook. In this way it is necessary to step knitting crochet the row to the end, and then remove the long loops from the cardboard.

   

   Crocheted loops

3. In this method, an elongated loop can be made with fixing it in the rows of the product that are below.

   

   Extended loop

   Usually, a thread is taken for this, which differs in shades from the thread of the main fabric. The row begins with a knitting of a different color. One or more columns b\n, it all depends on the picture. They must be knitted into the column of the previous row, then pull out the working thread to knit a long loop. It is necessary to insert a hook into the loop of the canvas, which is several rows lower and pull out a new loop from it, which should reach the height of the top row. Next, grab the working thread with a hook and pull through 2 loops that are on the hook. Continue knitting according to the pattern you have chosen. If you use this method of knitting loops with fastening, then the products will be obtained with very beautiful patterns.

Stretch loop pattern

You can see in more detail in the following video how to make elongated loops correctly:

solomon loops

These loops are similar in design to long ones, because in order to tie them, it is necessary to make an elongated loop, which is longer in length than usual. The drawing, thanks to these loops, is like an openwork mesh, and at the same time things seem very delicate and unsurpassed. Things that can be knitted in this pattern can be scarves, wraps, shawls and a variety of clothes.

solomon loops

In order for knitting to be the same in all places, the loops must be made the same in size. This is how you should create solomon loops:

• Make an initial loop, then pull a loop out of it. Pull a regular size loop through the loop you pulled out. Next, you need to insert a hook into a long loop and pull a second small loop through it. Next, grab the working thread with a hook and pass through the two threads that formed on the hook, then pull it again into a long loop. Thus, you should have a chain of the right size.
• The following is a diagram. Knit 2 Solomon loops to raise the row, then insert a knot into 2 loops that connect the elongated loops - a hook, and a b / n column is knitted from this, from which you then need to pull out a long loop. Next, you need to make 2 more Solomon loops, and then fasten by knitting a b / n column, then through one connecting node of the elongated loops of the previous row. Next, make Solomon loops until you reach the desired size of the canvas.

So it is worth remembering that all of the above loops, except for Solomon and elongated ones, are the basics in every crochet. So before you start fully immersing yourself in the world of knitting, you need to learn these simple basics, and after that, work wonders.