Pattern of overalls for women with a skirt. Master class: we sew women's overalls

I decided to have a marathon to remake old things into new ones and asked my mother to bring me things that are lying idle in the closet. It's not that I don't have the money to buy fabric, I just want to show you that it's not necessary to go to a fabric store to make clothes. And the best part is that this new thing will cost you for free! So, today I'll show you how to sew rompers for a girl without a pattern from an old dress.

What did I need to sew a summer jumpsuit for a girl

• mom's dress size 52, dress crepe fabric
• elastic band 1 m.
• button 1 pc.
• threads in color - 3 spools
• sewing tool - tailor's pins, safety pin, chalk, ruler

How to make patterns of summer overalls for the girl herself

As I said, I will not use ready-made patterns. Sometimes I'm just too lazy to print, glue and transfer patterns to tracing paper. Therefore, I act quickly and simply. I don't need to take a bunch of measurements for this method, I'll show you how to make your own jumpsuit pattern using just two measurements.

1. To make a pattern of summer overalls from my mother's dress, I separated the bodice (top) from the skirt along the waistline.

2. The top of the summer jumpsuit will be on the smell, so I cut the bodice - a shelf and a back in the middle.

Before (the shelf) I cut along the oblique.

The back will be sutured to measure the width of the back. To do this, I need to take measurements - The width of the back, who does not know, it is measured parallel to the floor along the back, from one armpit to the second.

We have a back width of 35 cm. I add 2 cm to it. For allowances = 35 + 2 = 37 cm.

I sew the back along the middle seam so that the distance from the arrow to the arrow in the photo becomes equal to the segment 37 cm in finished form.

How to cut out pants for summer overalls without a pattern

3. Now I cut out the bottom of the overalls - pants. For this, in fact, the pattern can also not be used. You just need to understand how the halves of the pants are cut.

As you can see from the photo back half trousers are slightly higher than the front, by about 3 - 4 cm. Another difference is that the back is cut along the middle seam more concave inward. Therefore, you can make these details of the pants by hand by eye.

The only measurement I need is the length of the seat at the middle seam. You need to tie an elastic band at the waist and measure the distance from the waist at the back to the front, passing a centimeter tape between the legs. And add + 5 cm to this value for freedom of fitting.

I got a value of 50 cm. I cut out the halves of the pants so that the total length of the seat along the shelf and back is 50 cm. In other words, the segment a + b \u003d 50 cm.

How to sew a summer jumpsuit for a girl step by step

4. I alternately sew the front and back halves of the pants along the middle seam.

5. I put the front of the pants on the back. I connect with each other first along the side seams, then along the step cut. Allowances for all cuts - 1 cm.

6. I process the top of the overalls with an oblique trim from the same fabric. You can find out how this can be done.

7. I sew the bottom (pants) to the top (bodice).

8. I insert elastic bands at the waist and bottom of the pants.

9. I sew a hinged loop and a button on the neckline so that the bodice does not swing open.

Summer jumpsuit for a girl without a pattern is ready! Why is this method good? When I sewed a jumpsuit from a dress, the top was already ready. I did not have to process the cut of the armhole and sew on the sleeves. And this, believe me, is not the easiest sewing operation, and I managed to save time by skipping this step. So if you have an unwanted dress, you can try to remake it.

It just so happens that every man in the course of his life from time to time has to perform work associated with physical stress and contact with pollutants.

Moreover, this can happen in a variety of conditions: in cold and rain, under the rays of the scorching sun and in wet, windy weather. Therefore, choosing the right equipment for them is "a matter of first importance and necessity."

The best choice for such cases is a good overalls that will protect against all sorts of negative factors and allow a man to feel comfortable and comfortable in any conditions. By the way, it can be purchased in specialized stores or made independently, taking into account all the features and parameters of your own figure.

Working men's overalls refers to special clothing for universal use, which is Can be used in a variety of situations both at work and at home. At the same time, in some enterprises it is mandatory to wear it.

Distinctive features of this uniform are:

• Practicality. Work overalls are made from durable, non-staining fabric that is easy to care for.
• Functionality.
• Convenience.

Purposes of its use:

• Protection against high or low temperatures, radioactive and electromagnetic effects.
• Prevent injury from sparks and flames.
• Ensuring comfort when working with greasy substances, oils, petroleum products, acids and other chemicals and compounds.
• Protection against dust and other industrial contaminants.

Applications:

• In construction;
• When performing installation work (at enterprises of various profiles, in auto repair shops);
• In the food industry;
• When performing welding and electrical work;
• In the chemical, furniture and processing industries;
• In agriculture, etc.

uniform requirements

The first overalls for workers appeared in America, where they were made of durable and practical denim, fastened along the main seams with decorative stitching of threads in a contrasting shade.

Since that time, denim has gained incredible popularity, and the work suit has been used in various industries, practically without changing its appearance. appearance and having lived up to the present.

Cut Features

Traditionally, such work clothes as men's work overalls are available in two versions:

• In the form of semi-overalls. It looks like trousers with straps and an additional piece of fabric sewn in the front and with a height to chest level. Most often completed with a jacket.
• In overalls. It looks like a one-piece suit with a straight silhouette, consisting of trousers sewn with a jacket, without darts and reliefs. Fit in the waist area is achieved through the use of a hidden drawstring, which can be either fixed or not fixed.

materials

The choice of material for the manufacture of men's overalls depends on the specifics of its further use. The most common of them are:

• . It is a kind of non-woven fabric white color polymer-based. Differs in the increased durability, has low electrical conductivity. It is used for sewing "disposable coveralls" used in the food and chemical industries, as well as medical and pharmaceutical laboratories to protect underwear from tears and dirt.
• - dense, wear-resistant fabric with diagonal thread weaving. It has high air permeability, provides optimal thermal exchange of the worker's skin, creates a comfortable microclimate for him to work in any conditions.
• with cotton base. Resistant to deformation, the most comfortable to wear.
• Tyvek. Another material of artificial origin, synthesized from polymer fibers. It has increased strength and ductility. Designed for the manufacture of workwear with a high degree of protection.

In addition, for operation in special conditions, apply special types of materials with certain sets of qualities, For example:

• Waterproof;
• fire resistance;
• Improved thermal protection;
• Airtight;
• reflective properties.

Materials with the listed characteristics are used for tailoring overalls operated in high-risk conditions. In particular, products with reflective elements are used in road construction.

Additional elements

As a rule, clothing of this type is supplied with various elements that make its use even more convenient and comfortable.

Most often this patch pockets, with one and several departments, located on the chest, hips and the back of the trousers, fastened to the valves with buttons. At the same time, the back pockets usually have reinforcement at the bottom.

Exception: spunbond models made without any finishing elements, characterized by a uniform structure and smoothness. They do not have pockets and valves and are supplied only with a removable protective hood.

Can be used as a fastener in work overalls buttons, snaps or zippers. Closure option: front or side. Sleeves on the cuff. The area of ​​the knees and elbows may have additional reinforcing pads.

Instructions for measuring and cutting with your own hands

Work overalls for your own needs can be purchased at a special store or made independently. This will require ( for cutting male model for height 170 cm, size 48):

• Blended fabric (half cotton with polymer) - 3 m (web width 1.5 m).
• 75 cm zipper (with two locks: lower and upper).
• One zipper each 16 cm, 19 cm and 28 cm long; 2 pcs. 20 cm, for pockets.
• Velcro tape 2 cm wide - 40 cm.
• 2 buttons.
• Ribbon on a rubber base 4 cm wide - 80 cm.

Elements of a pattern of men's work overalls:

• Two shelves.
• Pockets to it: right, with a 16 cm zipper, and a sewn-in pocket with dimensions: 8 x 13 cm - 1 pc. One left pocket. Valves to it - 2 pcs.
• One back.
• Coquette - 1 with a fold.
• One zip pocket 28 cm on the back.
• Sleeves, front and back elements - 2 pcs.
• Elbow reinforcing pads - 2 pcs.
• Folded cuff - 2 pcs.
• Gate - 1 pc.
• Turning the neck of the back - 1 pc.
• Neck facing and pick - 1 pc.
• Front and back halves of trousers - 2 pcs.
• Seat reinforcement - 1 pc.
• Knee pads - 2 pcs.
• Burlap for welt-type pockets (zipper 20 cm) on the front shelf of the trousers - 4 pcs.
• Side pocket with a zipper 18 cm.
• Sash - 2 parts.
• Loops - 4 pcs.
• Trouser gusset - 1 pc.

Allowances: on the seams - 1 cm, on the bottom of the trousers - 4 cm, on the entrance parts of the pockets - 2.5 cm.

Do you know how to choose this one correctly so as not to be mistaken and provide yourself with warmth when working in cold conditions?

You will find everything about men's work overalls: how to choose them, their varieties, and sewing requirements.

A detailed description of the uniform for firefighters and its classification.

Sequencing:

And how to sew semi-overalls, see this video tutorial:

Care rules

Since the material from which men's work overalls are made is usually characterized by high wear resistance and practicality, taking care of them is quite simple and not difficult. Blended fabrics can be dry cleaned and machine washed at 60 degrees. They can be ironed and steamed.

Some varieties of overalls for men (such as spunbond) are designed for single use.

Therefore, after use, they must be disposed of in the prescribed manner. Especially this applies to overalls in contact with toxic and radioactive substances.

Thus, it can be noted that men's work overalls are one of the most convenient and popular types of overalls used in everyday life and at work. Due to its protective properties, versatility and practicality, it is widely used in industry.

In addition, it can be made independently, taking into account all the features of your figure and the nature of the work in which it will be used in the future.

Overalls as an outerwear item is a combination of trousers with a jacket or bodice. At the beginning of its history, it was considered part of the costume of men in a number of specialties: aviators, miners, workers. In the late 19th and early 20th centuries, women wore swimsuits, sports and work overalls on a par with men.

The design of the cut-off model is a combination (combination) of the upper and lower parts, but products can also be one-piece. At the waist they gather with an elastic band.

blogspot.com

Modern women of fashion wear tight overalls (denim, woolen, insulated polyester), as well as models of spring-summer collections made of light, elastic or well-draped fabrics.

Basic fit

Most of the product models are based on the basic pattern of a straight silhouette jumpsuit. The range is expanding due to the variable length and width of trousers, the variety of styles of tops. The algorithm for constructing a basic drawing is simple.

1. The main pattern for women's overalls consists of two parts - a bodice and trousers.
2. To get patterns for its manufacture, it is enough to combine the standard drawings of the bodice of the dress of the adjacent silhouette with the cut of straight tight trousers. Modeling these patterns will allow you to get a number of other styles.
3. To build a standard overalls, you can use ready-made drawings of those parts that make up the product.
4. Patterns of the upper front part and back are borrowed from the dress, and all measurements are taken from the trouser design. Based on these data, the cut of any overalls is formed.

ideaweblab.ru

The one-piece model does not have a waist cut line and provides more freedom of movement. Such products can be made by modeling a pattern of an A-line dress or a T-shirt dress. To create a one-piece jumpsuit, it is enough to form the legs of the desired length from the hem of the dress. The design of the legs is carried over from the zouave style (trousers with a low fit).

standard model

A product of a direct silhouette with long trousers and top like "t-shirt".

www.ot-onlineshop.com

1. For a few centimeters, extend the lines of the recess for planting and the corresponding seam of the trouser construction. This will make walking easier.
2. Add about 1 cm to the step width of the back and front panels.
3. Connect the back of the dress and the back of the trousers into a single piece. The waist line on such a pattern should be clear.
4. Prepare stripes-additions for the design of cuts on the sides.
5. The style provides a straight silhouette, so tucks are not needed.

Modeling a pattern of a standard model

You can make structural changes to the drawing of the bodice as part of the jumpsuit. The trouser drawing in this case should be left unchanged.

1. Set aside 2 cm from the neckline of the front part. Draw a new cutout line.
2. On the armhole line on the side, mark a distance of 1 and 3 cm.
3. Make the outline of the shoulder shorter by 3 cm.
4. Ahead, draw new contours of the armhole.
5. Move the tuck from the chest line to the side.
6. Deepen the neckline on the back by 2 cm, and the armhole by 1 cm.
7. Make the shoulder shorter by 3 cm. Draw a new armhole on the back part.

By making changes to basic pattern, you can get a light jumpsuit with straps on the bodice and trousers middle length(to mid-calf).

stockretail.ru

1. Deepen the fit of the trousers by a couple of centimeters. Increase the step width of both panels by 0.5-1 cm.
2. As a result, the fold along which the trousers are ironed will move in the direction of the crotch. The amount by which it will shift will be equal to the new step width of the trousers.
3. Set aside the lower leg width from the newly formed fold. Divide the measurement of the bottom by 4. Subtract 1 cm from the width of the front part, and add 1 cm to the value relevant for the back half.
4. After that, the front of the trousers should receive a new step cut, and the back - side. In the latter case, move the notches along the lines of the knees.
5. Make a new step cut for the back half of the product.
6. On the back of the trousers, outline the waistline. Duplicate this straight line, lowering it by 3.5 cm. Along the bottom line, the front of the bodice will be connected to the trouser front. The top line can be designed as an imitation seam.
7. Mark slots for future pockets.
8. Correct the central section of the back of the trousers.
9. Prepare a pattern for the top of the dress.
10. Make allowances for zippers and buttons.
11. Run the straps of the bodice. Their width should not exceed 3 cm. The optimal length is a little more than 55 cm.

Product processing

1. The processing process is the same for models of any design. When cutting, the direction of the grain thread should be taken into account.
2. Finish the edges with an overlock.
3. Fold the front and back legs right sides together.
4. Stitch and machine stitch the seat lines.
5. Bend the sewn front and back halves of the trousers to face each other.
6. Connect the side seams and step cuts.
7. The top of the model can be decorated, and the bodice can be provided with straps.
8. Sew the top and bottom of the jumpsuit. Slightly below the main line, lay the finishing line. Pass an elastic band of the desired width between the seams.

wildberries.ru

Overalls without a pattern

You can make a model without building drawings and even without using ready-made patterns.

1. Bend the material in half and apply ready-made trousers of the appropriate size to the base of the fold.
2. Raise the waistline where the elastic band will be sewn.
3. Repeat the outline of the finished product on the fabric.
4. Duplicate on fabric double folded ready-made jacket or a shirt. Make the back part longer than the front, deepening the neck by 10 cm.
5. Make straps from two pieces of fabric rectangular shape. Details width - 7 cm, length - 20 cm.
6. Connect both parts of the legs along the step cut with a machine line.
7. Form trousers from the available parts.
8. Sew the side cuts of the top of the product.
9. Attach the straps to the edges of the armholes. So it will seem that the neckline is extended.
10. From the inside out at the bottom of the armhole, attach an elastic band using a zigzag seam.
11. Gather the fabric with an elastic band.
12. Form a drawstring for the elastic in the neck area.
13. At the waist make a three-level drawstring. Pass the elastic band of the desired width into it.
14. Connect all parts of the overalls into one model.

Overalls from other products

The jumpsuit is formed from other ready-made garments - dresses or skirts. In this case, it will take about 15 minutes to make a model.

1. Disassemble the dress by unraveling the seams. It turns out one piece of fabric.
2. Duplicate Path ready-made trousers on doubled matter. Sew details.
3. Using your waist measurement as a length, draw a 55 cm wide rectangle on the fabric. Cut out the piece and sew, folding in half.
4. Combine the top and bottom of the overalls.
5. Fasten the elastic at waist level by threading it into the drawstring.
6. Sew the straps to the bodice.

moda-mir.ru

1. Mark on the finished product the length of future shorts - the bottom of the overalls. Cut off the hem of the skirt a little below the mark.
2. Determine the middle on the front and back of the remaining skirt piece.
3. Make a cut on the product to the level of the lower point of the future landing of the shorts. Form the pants.
4. Duplicate the contours of the finished bodice (shirt, top) on the fabric. Sew the top of the jumpsuit.
5. Connect the parts of the product.

retailon.ru

Novice craftsmen who decide to create a summer combined model on their own can use a piece of chintz or linen. In general, for the manufacture of overalls, fabrics are recommended that allow air to pass through well, the so-called "breathable": viscose, chiffon, cotton. The jumpsuit can be worn as an evening dress. For this case, silk and elastic materials are suitable. They can be combined with leather or lace. Practical tight overalls for every day are sewn from fabrics for making suits and coats, as well as from denim and velvet.

• the length of the trousers from the waist to the floor is multiplied by 2 and added 0.5 m.

Typically, a jumpsuit takes from 3 to 3.5 m of fabric.

It's getting warmer outside every day, and finally spring has come, friends. This year it has been unusually protracted. And not only outside the window today will be bright colors but also on my desktop. Because I will sew a women's summer jumpsuit with shorts made of fabric with a beautiful graphic print.

I already have a similar model in my wardrobe, and I find it the most comfortable for the summer. In the sense that you do not have to pick up the top or bottom, this is a ready-made kit. Such a summer jumpsuit with shorts is loose and breathable, so it is not hot and comfortable to move in it.

Pattern of overalls for women's summer

I will sew according to the pattern of women's summer jumpsuit size 42 - 48, which is shown in the photo below, the fit on her figure is just perfect. Summer jumpsuit consists of four patterns:

• before (shelf) - 2 parts
• back - 2 parts
• front and back half of the shorts without side seam - 2 parts
• belt with dimensions 150 * 8 cm. - 1 detail

How to sew a women's summer overalls according to a pattern step by step

For sewing a summer thing, it is better to choose a material natural composition: viscose or cotton. It is desirable that it does not wrinkle much and does not shine through. For my size 44, I have this piece of viscose - 90 cm, I also needed:

• cotton slanting trim in the color of the fabric - 3 m.,
• underwear elastic band equal to the waist circumference - 68 cm.
• threads

01. I lay out the details of the finished pattern on the fabric folded in half. So that on the details of the back and front, the direction of the stripes on the fabric goes at an angle. I fix the tracing paper on the fabric with the help of tailor's pins.

I cut out all the details, taking into account the allowance for cuts.

02. First, I collect the bottom of the overalls - shorts. To do this, I put the details of the shorts on top of each other with the front sides inward, sew along the side sections, and overcast the sections on the overlock.

03. Then I stitch together along the step cut. I sweep.

Ironing the seam on the ironing pad. In any direction.

04. I overcast the bottom of the shorts on the overlock.

I bend to the wrong side by 1 cm, sew the hem on sewing machine.

05. I start sewing the top of the overalls. I connect the details of the shelf and back along the side cut.

I do the same operation with the second parts. I overcast the cuts.

06. I will process the cuts of the neck and sleeves with an oblique trim.

I measure the cut of the armhole with a centimeter tape with a centimeter tape along the shelf and back, cut off the oblique trim along the resulting segment.

I smooth it out on one side.

I sew a slanting inlay on a sewing machine on the sleeve cutout on the front side.

07. I sew on an allowance for a slanting inlay. I make a line at 1 mm. from the edge.

08. I bend the oblique inlay to the wrong side. I sew first with running stitches, then on a sewing machine, retreating 1 mm. from the edge.

I process the second armhole and neckline with an oblique trim.

09. I combine the details in the middle - control points on the front and back patterns. I pin with pins along the waistline.

I sew the details along the waistline on a sewing machine.

10. I connect the bodice with shorts.

I overcast the cut, iron it down towards the shorts.

11. I am preparing a drawstring. I sew an allowance along the waistline on the jumpsuit. I leave a 2-3 cm section unsewn for threading the elastic.

12. I put a pin on one end of the elastic band. I put it in the opening of the drawstring and pass it through the entire waist lily.

I sew the ends of the elastic overlap with each other on a sewing machine.

13. Last step my master class is sewing a belt. To do this, I take a belt pattern, fold it in half, sew it on both sides, in the middle I leave an unsewn segment of 4-5 cm for turning it on the front side.

The hole in the belt can be sealed with a piece of glue gossamer or sewn up with a blind seam.

My bright summer striped jumpsuit is ready!

I was satisfied with the result of the tailoring. The result is a light and versatile thing for the summer. Another plus of this model can be considered the fact that it will not lift up the bottom in the wind. Usually, summer things made of light fabrics with a short bottom, with a gust of wind, tend to scatter and create uncomfortable situations. Girls, now they will understand me) Just like me, as an active cyclist

Are women's overalls relevant today and will they be in fashion tomorrow? The unequivocal answer is “yes”. This outfit always looks feminine, elegant and elegant. Depending on the style of the jumpsuit, you can wear it to a business meeting, to the beach, to a restaurant, for a walk, and even to work.

Given the individual characteristics of each figure, if the suit fits perfectly, it will definitely make its owner slimmer, taller and more beautiful.

There is one thing in all this: it is very difficult to choose a jumpsuit in a store so that the outfit fits perfectly in all respects, and even the color and size fit. But this problem is solvable: you can always sit down and sew a jumpsuit with your own hands.

Choice of style and material

Before sewing, decide on the style, color, choose the right fabric. You can take any material. Silk, satin, linen are suitable for a light summer outfit. Jeans overalls look very nice. From knitted fabric You can sew a classic and even a sports item.

The bodice of the product may look like a top with or without straps, look like a blouse, shirt. The upper part of the bodice can be made with or without sleeves, with one sleeve, with straps tied at the shoulders or at the neck, with a collar, flounces, or in any other way. It all depends on your desire and imagination.

The lower part of the jumpsuit can also have many options; it can be made under shorts, trousers, breeches. The length has the right to be the most diverse: mini and maxi, as well as the width: free-cut or tight-fitting.

You can let your imagination run wild and show Creative skills using decorative elements and accessories.

Tools and materials for sewing

Before you start cutting and sewing, you need to prepare everything necessary tools and materials.

For work you will need:

1. A piece of fabric with a length of 1.5 to 2 meters.
2. Scissors.
3. Ruler.
4. Tape measure.
5. Chalk or remnant.
6. Pattern paper.
7. Pencil or pen.
8. Pins.
9. Threads.
10. Sewing machine.
11. Decor elements, accessories (if necessary).

How to sew a light summer jumpsuit

Light summer jumpsuit can be easily sewn using ready-made pattern or combine the pattern yourself from two parts: the top - top, blouse, and the bottom - shorts or trousers.

Choose natural, light, light fabric for summer outfits. If your choice is on a fabric with floral print, ornaments or geometric shapes, pay attention to the fact that in the finished product the patterns look symmetrical, go in the same direction.

Sew denim overalls with shorts

Today there are many types denim, it differs both in density and different colors. The principle of sewing denim overalls is the same as any other.

You need to make a pattern, transfer it to the fabric, cut and connect all the details.

The pattern can be used ready-made, but taking into account its size.

Choose the length and style of the shorts based on your figure, it is important to remember that denim material, with proper tailoring, can hide all the flaws in the forms and emphasize the slimness of the lady's figure. But there is a downside: if you choose the wrong cut for this fabric, the jumpsuit will look rough, putting you in a bad light.

Jeans can be decorated with beads, rhinestones, lace, rivets and appliqué.

Sew sports overalls

Jumpsuit is perfect for dancing, sports, fitness sports style. First of all, such a model should be comfortable and suitable for active physical activities, therefore It is worth choosing an elastic and durable material.

The cut of such a jumpsuit can have several variations: tight-fitting or loose tailoring. Sports overalls can be sewn with long or short sleeve with a stand-up collar or with an armhole, it can also be in the form of a T-shirt. The lower part is often tight-fitting, in the form of leggings, sometimes with flared legs, less often a free cut.

ATTENTION! For sewing a sports item, it is recommended to take a material with a high degree of extensibility: knitwear or fabrics with the addition of elastane.

Master class on sewing overalls

So, we are learning to sew a beautiful women's jumpsuit. At the very beginning, we already decided on the style, color, and in our imagination we already tried on a new spectacular outfit. It remains to bring this idea to life.

When you have everything prepared necessary materials and sewing tools The first task is to make a pattern.

How to make a pattern for women's overalls

Before creating a pattern, you will need to take some measurements:

1. Half neck.
2. Half bust.
3. Half waist.
4. Half hip.
5. Semi-girth over the chest.
6. Chest height.
7. Gubin armhole.
8. Front length to waist.
9. Back length to waist.
10. Shoulder length.
11. The length of the sleeve.
12. Back width.
13. Length trousers.

It is convenient to build a pattern on special paper, which is marked with a small cell (tracing paper), but if there is none, plain paper will do. Use a ruler and pencil to draw contour lines.

IMPORTANT! 80% of the final result depends on how carefully you build the pattern.

If you are an experienced craftsman, then you can choose complex model consisting of a bodice and trousers. newbie in sewing business should pay attention to more simple model, and only then gradually move on to a complex cut.

Cutting fabrics for overalls

Stages of work when cutting:

1. For cutting, you need to lay out the fabric with the wrong side up on a flat surface, the material must first be well ironed.
2. You need to apply the pattern along the warp thread, if there are details given in the half version, then they are applied on the fold of the fabric, as a result, a single piece is obtained.
3. A paper pattern is applied to the fabric and fixed with pins, the contour is circled with remnant or chalk.
4. Stroking details is carried out exactly along the contour, the thickness of the lines should not be more than 2 mm.
5. After all the details are applied to the fabric, you can add the required amount of allowances for the seams.
6. Check the accuracy and availability of all the details, the direction of the pattern, the front and back sides, and you can start cutting out the elements.

IMPORTANT! If the fabric of the future overalls has a pattern or embossing, then the pattern should always be laid out in one direction.

Step by step sewing instructions

1. Sweep the details of the future overalls and iron them well, proceed to the first fitting. Already at this stage, you will see how the final result will look like the finished thing.
2. If necessary, make adjustments, adjust the product to fit your figure.
3. If possible, then the edges of the fabric must be processed with a special machine - an overlock, when one is not available, then this can be done manually.
4. When everything is ready, you can finally sew the jumpsuit.
5. The finished product must be carefully ironed.
6. The final step in the manufacture of overalls will be its decoration. How you decorate the product is completely up to your imagination. You can decorate the jumpsuit with zippers, embroidery or buttons.

ATTENTION! When using decorative elements, it is important to remember Golden Rule about a sense of proportion.

Remember: the one who does nothing is not mistaken. Even if you have made some mistake, do not fall into despair, take it calmly, as a lesson for the future. Experiment, try, let your imagination pour out into beautiful things, and you will always be irresistible and unique.