home » Groups » How to make boutonnieres for guests and the groom for a wedding with your own hands - a master class. How to make a boutonniere for the groom with your own hands from satin ribbons and other materials Boutonniere from flowers from ribbons

How to make boutonnieres for guests and the groom for a wedding with your own hands - a master class. How to make a boutonniere for the groom with your own hands from satin ribbons and other materials Boutonniere from flowers from ribbons

Kanzashi crafts are in trend today, so do not give up the pleasure of learning this needlework and making it one of your hobbies.

Take step-by-step photos as assistants and step by step master class to create a miniature bouquet of tulips - boutonnieres from satin ribbons and lace in kanzashi technique. This composition is perfect as a decor on baby suit or a festive dress, it can also be used as a decorative bracelet or decoration for a hairband, headband, bag.

Boutonniere materials and tools for work

To make a beautiful boutonniere from ribbons with your own hands, prepare the materials. You will need:

satin ribbon 2.5 cm scarlet;
silk ribbon 2.5 cm pale blue;
satin ribbon 2.5 cm deep green;
milky lace 4 cm wide - 18 cm;
three round sewn-on (adhesive) rhinestones;
a piece of felt measuring 5x5 cm;
candle and lighter;
scissors;
polymer glue such as "Dragon" or "Titan";
ruler;
threads white color and a needle.

If you are completely unfamiliar with this needlework and terms, look at the introductory one on our website "Women's Hobbies".

Step-by-step manufacturing technique with photo

Take a 5cm x 5cm piece of dark olive felt, cut off the corners and carefully round to form a perfect circle out of the square.

Take a piece of milky lace, a needle and thread. Sew the thread all over its inside.

Pull the thread on both ends towards you. Make sure that the length of the inner stitched part of the lace is equal to the length of the perimeter of the circle.

Sew the lace into a neat ring and join the edges.

Glue a felt circle in the middle. The base for the boutonniere of satin ribbons is ready!

To make green leaves, cut the satin ribbon into 9 cm lengths.

Take one of the segments and place it on horizontal line wrong side up.

At the points of the middle of the segment, wrap the fabric forward and down. Mark the center point on the fold line. Fold the tape along the center point of the fold line forward. Form the fabric into a neat petal.

Fold the petal in half lengthwise. Then wrap the bottom side edges back to the fold line. Form a neat petal from the fabric. Scorch its lower edge over the fire and press down with tweezers. One of the petals for the pillow is ready.

Working in this mode, make 7 neat petals of bright green color from kanzashi satin ribbons for tulips.

Glue the green petals in a circle onto the lace and felt base. Make sure that all the leaves are glued evenly and symmetrically.

In the next part of the master class, you need to make tulips using the kanzashi technique. Cut a 2.5 cm red satin ribbon and blue color into segments of 21 cm (total 3 segments).

Take one of the cuts. Lay face down. Retreating 2.5 cm, bend it forward and down.

Bend forward along the line of the main tape. Secure the folded fabric with a pin.

Again step back 2.5 cm and bend the ribbon forward and down. Bend back along the line of the main tape. We fix the bends with a pin.

In the same mode, step back 2.5 cm again, bend forward and then back, and fix with a pin.

For the fourth time, make a bend only vered. Then lift the bottom edge up and fix both edges with a pin.

Take a needle and thread. Sew with a basting stitch all the folds on the ribbon from the outside.

Pull the threads towards you, tie them and sew the bottom of the bud.

In this technique, make two more buds. In total, three kanzashi tulips should turn out: two bright red and one pale blue.

To decorate a boutonniere made of satin ribbons, sew or glue rhinestones into the middle of the buds.

Attach the buds over the green petal and lace pad.

Kanzashi boutonniere "Tulips" is ready! Wear with pleasure and receive well-deserved compliments from friends and acquaintances. Such compositions can be made for gifts on March 8, replacing them with fresh flowers.

If you liked this master class, liked it, make other decorations according to our instructions from.

Boutonnieres with satin ribbon roses are perhaps the most popular and most beautiful. They are performed in the Kazan technique. Such products cannot be called banal, because each needlewoman brings something new, unusual, uses different colors, fragments of fittings. In this master class, you will learn how to make boutonnieres from satin ribbon with your own hands. These decorations are created in the form of snow-white bouquets of three roses.

To create a boutonniere from a satin ribbon with your own hands, you will need:

13 pieces of white ribbon - 2.5 * 10 cm (7 pieces in order to sew together and make the bottom layer of the composition, 6 - for cup petals);
27 pieces of white ribbon - 2.5 * 6 cm (for making three roses, 9 petals each);
3 pieces of narrow white ribbon - 0.5 * 10 cm;
4 pieces of white beads on a thread - 10 cm;
6 semi-beads in the form of white mother-of-pearl pearls - 6 mm in diameter;
2 white felt circles - 3 cm and 4 cm;
base for attaching jewelry in the form of a 7.5 cm clip or a large pin.

These wedding decorations are a multi-layered snow-white composition, consisting of three rosebuds, snowflakes from leaves-bags and a lower white chamomile. To create all the details and attach them to one bouquet, you need to prepare a ruler, scissors, a lighter, glue gun, needle with white thread and soldering iron.

Do-it-yourself boutonnieres from satin ribbon step by step:

In this master class, only white fittings will be used for boutonnieres. Prepare pieces of ribbon in three sizes, half-beads and beads on a thread, felt parts and a fastening base in the form of a clip or pin.

Take 7 of the 13 pieces of 2.5 * 10 cm, they will be needed to create the bottom layer. Bend each piece in half, but do not wrinkle (do not iron) the tape at the fold. Having closed both ends of the segment, leaving the wrong side inside, go through the stitches at the very edge. To do this, you need a needle and white thread. String gradually one by one all 7 petals. Tighten the knot.

Cut off the rest of the thread. The result will be White flower from the simplest petals. This will be the bottom layer of the boutonniere.

From a tape measuring 2.5 * 10 cm, there will still be 6 segments. Use them to create a second layer consisting of calyx leaves. To model them, you also need to bend the segments. In this case, it is desirable to iron the place of the bend. Using a hot soldering iron, cut each piece folded in half diagonally into 2 pieces. Use the part that is located at the fold of the tape to create the second layer. It will look like a sepal. For each leaf, you need to pick up one mother-of-pearl pearl.

The top layer is the most important. It consists of three small roses. To make petals, use 27 pieces of tape 2.5 * 6 cm. In each triangle, bend two adjacent corners symmetrically, aligning the sides with one wide side. Then fold inward the resulting sharp corners. The result should be rounded rose petals.

Use 9 petals to create each bud. Twist the first part in the form of a bundle, stick all the rest, distributing evenly around the circumference.

Model 3 identical roses. Glue the flowers at an angle, and between them lay one loop of white beads on a thread.

Sew 6 sepals into a snowflake. Glue a half-bead to the sharp corner of each ray.

Glue 3 more loops of beads onto the snowflake, spacing them evenly. Also make loops from thin tape size 0.5*10 cm.

Glue the flower arrangement on the snowflake, attach the white loops in the center so that the narrow tails look out.

Now the 2 main parts of the decoration are ready. The boutonniere assembly is almost finished.

Connect the resulting layers.

As you can see, satin ribbon boutonnieres are very easy to make, but, nevertheless, they look very beautiful. They can be used to decorate suits and his friends, as well as to complement wedding decor items.

In ancient Greece, men wore a boutonniere during a wedding in order to protect their marriage from evil spirits, and in Rome, the bride attached a small bouquet of fresh flowers to the groom's clothes, which became a symbol eternal love and fidelity.

In European tradition, the boutonniere was considered essential attribute wardrobe of secular dandies and testified to their taste and sophistication.

Despite the long history of its existence, a miniature bouquet of flowers still flaunts on wedding suits suitors. As a rule, the color scheme and appearance coincide with the bride's bouquet.

If you want to give a future spouse original gift, then try to make a boutonniere yourself.

There are several original ideas creating a wedding flower arrangement.

Classic bridal boutonniere

To make a boutonniere from fresh flowers, you must first decide on the choice of inflorescences. The ideal option is an unblown rose, as it has a neutral smell and retains its original appearance for a long time in a warm room.

Purchase the following from the florist shop in advance:

Before the boutonniere making process check that you have all the necessary parts, since you will be working with vibrant colors that have the ability to quickly lose their fresh look.

Put the roses in water with the addition of the Chrysal solution for 4-6 hours so that they are saturated with a special substance that helps retain moisture in the bud.

After making the boutonniere, it should be attached to the pin with a wire, put in a sealed bag and placed in a cold place until use.

From polymer clay

If you want to make a durable, but no less original wedding accessory, then try your hand at polymer clay modeling. This material has the properties to accurately convey all the nuances of a living flower, as it is quite plastic and pliable.

For the creative process you will need:

Must be crushed first polymer clay until a soft and elastic mass is formed. Then do everything in sequence:

Such a flower arrangement is not afraid of either bad weather conditions or a long storage time. At the same time, in terms of beauty and naturalness, it is in no way inferior to fresh flowers.

From fabric

Renowned designer Laurie Cinotto launches a line of boutonnieres made from fabric, feathers, beads, and more. However, with some effort you can make such a masterpiece yourself.

Prepare in advance:

a variety of colored trimmings from soft tissues;
floral wire;
decorative tape (5-8 mm);
teip tape;
large beads;
white feathers;
artificial sequins;
curly scissors;
PVA glue.

Creating a boutonniere from fabric is a creative process, so it completely depends on your imagination and imagination.

A wedding accessory is made in several stages:

A fabric boutonniere can be stored for an unlimited amount of time., as this is the most durable option.

Other original variants making a bridal bouquet with your own hands:

Useful reviews

Anastasia

“I have been a florist for many years. If you want the juice from the flower to not leave for a long time, then it is better to treat the cut stem with special glue, which can be bought at any florist's shop.

Maria
“I made a boutonniere for my fiancé myself, because I wanted a perfect match with the color of my dress. At first I couldn’t choose the right palette, and then I found a color matching table on the Internet and in the end it turned out great.”

Svetlana

“To make a fabric boutonniere look more natural, you can use thin threads of green lurex, which are pre-wound on a simple pencil. So they turn out to look like curls of a flower.

Alexandra

“The rhinestone pins give the boutonniere an extra touch of sophistication. But we must remember that there should be no more than three. If there is more, then it already looks vulgar.”

Wedding accessories are an indispensable and final component of the image of both the groom and the bride.
Making a boutonniere with your own hands is not only a sign of a woman's reverent attitude towards her future spouse, but also an indicator of love and tenderness.

During preparation for the wedding, it is not necessary to buy all the important wedding attributes in special stores or order from masters, some products can be created by yourself. For example, the groom's boutonniere is a flower that matches the composition of the bride, which is attached to the pocket or lapel of the jacket.

For the bride, it is possible to create a similar boutonniere on her hand. They can be made not only from fresh flowers, but also from corrugated paper, or beads with stones and rhinestones, the main thing is that they are made in the same style. For a boy or girl, boutonnieres can be made as prom decorations.

Now become popular wedding flowers from satin ribbons, any woman who has not even started needlework before can create such an attribute with her own hands, spending a minimum amount of time - just use our step by step guide.

Rose is traditional flower for decoration weddings and, in particular, the image of husband and wife. If the option with the live queen of flowers is removed due to the presence of an allergy in a man or guests of the celebration, you can simply create a bud for a boutonniere with your own hands, while it will be almost no different from a real flower.

In addition, this option will look more unusual and will show that the bride wants to try for the sake of her beloved future husband.

To create an opened wedding bud, you only need a medium-thick satin ribbon, pins and a needle and thread. color scheme material should be chosen based on the color of the man’s suit and the general decoration of the celebration. You can take a gradient paint, which is characterized by smooth transitions from light to dark.
It will be necessary to bend a small section of the tape on one side to get a right angle, for comfort, you can fix the workpiece with a pin. Then you need to fold the corner and bend the tape to it, creating petals of a certain splendor. When the rosette reaches the required size, it is necessary to cut off the remnants of the ribbon and fix the design by stitching it from the bottom side with threads.

Gallery: foamiran boutonniere (25 photos)

Peony from individual petals, master class

Peony is a flower noble birth, since in the distant past in the countries of the East only important people grew this plant on their plots. Now the peony is found in almost all countries, and its popularity is only growing. From satin ribbons, you can create a wonderful artificial imitation with your own hands, very similar to the original itself. For this you will need:

To create a peony satin ribbons with your own hands, you must first create a pattern of petals. To do this, on a piece of paper you will need to draw a blank five centimeters high or a little less in the shape of a wide heart with a point cut off along the straight side, the base should be about 25 mm.

According to this pattern, you need to cut out six identical petals, then reduce the workpiece by five mm, and cut out the next six parts, and then repeat the action again. As a result, we should have eighteen petals in three groups of different sizes.

We light a candle and burn each petal in turn from all sides over its fire. To do this, we slowly take the workpiece with our own hands and bring one edge to the flame, and when it burns, we immediately stretch it in all directions.

This is done so that the petal becomes wavy, similar to real petal. When all the edges are finished and stretched, put the workpiece over the fire for a short time, holding it with tweezers so that it takes the desired shape.

In order not to spoil the cut out petals, we will practice before work on the remaining extra piece of satin.

Then you need to make stamens, for this you need to cut a couple of pieces of wire about 5-6 cm long. On one end of each piece, you need to squeeze a drop of glue with a gun, then dip our stamen in sparkles or small beads and create an even drop. When the stamen dries, you can additionally decorate it with clear nail polish to get glossy surface.

The final step is to assemble the peony from satin ribbons together, for this we sew six large petals together along the base with our “forward needle” seam, leaving a hole for the stamens in the middle.

When the base is created, you need to put the holes created by the stamens inside and strengthen the structure. Then, still stitching it, from the wrong side. After that, it remains only to sew on all the other petals, starting with medium and ending with small parts. Here we have finished our Master Class, do not be afraid to make crafts from foamiran, guests at the wedding will really like them. Despite the fact that the flowers are artificial, they will look like real ones.

The last boutonniere assembly: a master class

When the main flower for the wedding is made from a satin ribbon, you can proceed to making boutonnieres from foamiran for the groom for the wedding with your own hands. To do this, you need to pass a wire through the finished bud and bend it in the form of a stem. To make the design tight, you can thread two identical pieces of wire perpendicular to each other, and then also bend them down. The wire will need to be wrapped with a special green tape.

You can add various decorations to the main flower, for example, you can create it yourself decorative greens according to the principle of creating stamens or add leaves cut and set on fire from a green satin ribbon. Having gathered all the details together, it is necessary to create a single boutonniere stem from wire and our tape.

How to make a boutonniere with your own hands? This question is asked by many brides and grooms. After all, a boutonniere is a beautiful wedding accessory, and at the same time quite simple in execution.

We will show different variants wedding boutonnieres that you can make yourself. Let's give helpful tips and show simple master classes.

Traditionally, a boutonniere is a small flower that adorns the groom's attire. But in fact, it is not at all necessary to be limited to a flower.

The appearance of the groom is given less importance than the dress of the bride. So, it is on such small details as a boutonniere that you should especially focus on. We are sure that by the end of the article you will see for yourself.

DIY rose boutonniere

The groom's boutonniere of roses is the most traditional option. This decoration looks expensive, elegant, and is done quite easily.

Step-by-step master class on how to make a boutonniere from roses with your own hands.

Boutonnieres with lavender

Lavender boutonnieres are laconic, but at the same time they do not look too simple and “rustic”. A great option for a summer outdoor wedding (and especially for a rustic or shabby chic wedding).

Wedding buttonholes with feathers

Wedding boutonnieres with feathers are bright, fresh and unusual. They are made no more difficult than flower ones.

Master class on how to make a feather boutonniere with your own hands.

Leaf boutonniere

You can make a boutonniere for a wedding without using flowers at all. To do this, you only need beautiful leaves - here is a step-by-step master class.

Boutonniere with succulents

Succulents are amazing flowers. They are becoming more and more popular in wedding floristry, including succulents that look great in boutonnieres.

Assorted flower

Any flowers will do for wedding boutonnieres. The main thing is that you like them and fit in color, style.

A master class on how to make a boutonniere for a wedding from wild flowers.

You can also use flowering twigs, leaves and even tree bark.

Or cones!

Wedding boutonnieres with your favorite characters

Why not please your beloved groom by decorating his suit with your favorite character? Believe me, a small figurine will bring a lot of happiness!

You can pick up an interesting pendant, then you can generally do without additional decor.

Boutonnieres for a sea wedding

For a wedding in a marine style, it is better to make a boutonniere not from flowers, but to use materials that will emphasize the chosen theme. Shells, stripes and marine paraphernalia are what you need in this case.

Key to the heart

How symbolic to give your loved one the key to your heart on your wedding day.

Decorate it with flowers, ribbons or feathers to match your wedding palette - it will turn out unusual and beautiful.

DIY boutonnieres from ribbons

Ribbons are an excellent and inexpensive material for creativity. We advise you not to use satin ribbons for a boutonniere, much more interesting options are obtained from non-shiny fabrics.

Look at the photo: it is noticeable that the boutonniere is made by hand, but nevertheless it looks neat, strict and solemn.

How to make a boutonniere out of cloth and paper

We offer you a small master class on how to make an unusual wedding boutonniere using fabric and paper.

Several similar options:

And, of course, we could not pass by such delicate airy boutonnieres. They are also easy to make yourself.

Boutonnieres for witnesses and guests

If you don’t feel sorry for the time, you can make boutonnieres for witnesses or even guests. They may be somewhat simpler, less decorated than a boutonniere for the groom. Here are a few interesting examples what boutonnieres you can make for witnesses and guests with your own hands.