home » For children » How to build on forms. Step-by-step gel nail extension: step-by-step instructions with a description and photo, execution technique

How to build on forms. Step-by-step gel nail extension: step-by-step instructions with a description and photo, execution technique

How nice if the nails have a perfect manicure! But not every woman is given the opportunity to do it: it confuses the form that is far from ideal. nail plate, then the nails are fragile and break for no reason. To solve such problems, special gel coatings are used, and if necessary, extensions take place. Gel nails are covered not only on the hands, but also on the legs.

Gel nail extension technology at home

You can apply artificial material to the nails in any nail salon. But you can do it at home too. This is especially easy to do for those who have the necessary practical knowledge, a set of materials and tools:

a special lamp (usually this is drying with UV radiation so that the polymer hardens);
gel (the type is selected individually, single-phase, two- or three-phase can be used);
tools (a basic manicure set or a router with the necessary nozzles when choosing a hardware type of manicure, buffs, a nail file, etc.).

Using the gel extension procedure, you can achieve nails of any length. You can decorate them with any drawings (there is much more space for creativity than on native nails). Extended nails (if necessary) can be easily covered with any ordinary varnish. Removing the varnish is as simple as applying it, but the original design will not be affected.

It is easy for a manicure master to navigate among the materials and choose exactly the one that is needed in specific case. How to work with it is also not a problem for a professional. But if the gel is chosen for home use, then it is necessary to take into account all the stages of extension in order to get a high-quality result.

When building nails at home, it is worth paying attention to the quality drying of each layer of the gel so that the final result does not disappoint. Also, it is not necessary to apply the coating too close to the nail bed, so as not to injure it during the coating and modeling process.

And here is the video of the master class:

Types of gels

Beautiful nails can be obtained if you choose a high-quality coating material and use it correctly. They build up nails according to the same scheme both in beauty salons and at home. The main thing is not to skip any of the stages.

Among artificial coatings, you can choose those that injure the nail plate and those that restore. They also differ from each other in the duration of the extension.

single phase

A beautiful manicure without additional bottles and jars is possible if you build up your nails with a single-phase gel. It has the properties of both the base and modeling layer, and the finishing (top). Single-phase products allow beginners not to bother with the sequence of applying layers, but to fully engage in nail modeling and design.

In order for artificial nails to have a decent look when using a single-phase gel, you need to know some tricks and not neglect them. To form an attractive "hump" on the nail (apex), at the formation stage, you need to turn the finger with the nail down. This is necessary so that a certain amount of liquid gel accumulates in one place, and the apex zone has a convex shape. You can fix the result by exposing the gel to an ultraviolet lamp.

two-phase

The procedure and technique of building with such a gel does not change at all. Only the number of required bottles is added: now you need two of them. One tool serves as a base, and the second - a sculptor and top layer.

Two-phase gels are more reliable and durable to wear, but have the disadvantage that the sculptor gel must perform the protective function. It is applied in a very thin layer for the third layer - the "finish". He often does not cope with his duties, and handsome long nail just bursts along.

Since the consistency of the two products is different, it is necessary to have two brushes for a two-phase extension.

three-phase

This type of extension is considered professional and the most durable. Three special tools are used here that have a specific purpose.

On the nail surface prepared in advance, the first remedy is applied - the base. It is she who firmly "hooks" the natural surface of the nail plate with artificial turf.
After drying, the sculptor is applied. This layer can be either transparent or colored gel. It has sufficient density to slowly make the intended shape of the nail.
After going through a complex procedure of forming a nail and its design, everything is eventually covered with a special tool, which preserves an excellent manicure. It protects against everyday "provocateurs": detergents, solid objects, hard surfaces, etc.

Natural nails are covered with three different means, from which the gel is called three-phase. The advantage of such gel nails is the durability of the socks, but there is also a drawback - during the removal procedure and subsequent extension, the nail plate becomes thinner.

It is difficult to remove such nails on your own without special tools at hand. It is difficult to file extended nails with a three-phase gel due to their high strength, and it is completely forbidden to “rip off” them from the nail.

Extension methods

Beautiful well-groomed nails delight their owner and are a source of pride in front of others. But among people who admire aesthetic manicure, no one even guesses what efforts good master he gave. It happens that the nail is not suitable for applying any gels on top of it. Then tips come to the rescue, which are glued to the nail with special glue.

On tips

Although this method of building is no longer considered a popular technology, it is used for self-building. This is convenient, since there is no need to use mold stickers, and the shape of the nail is almost ready and only a slight correction is needed. Tips are also used in such cases:

the nail plate is wide and short;
the surface of the nail is severely depleted and cannot be re-growth;
there is an allergic reaction to the gel (then tips are selected that completely cover the nail from the nail bed itself).

In order for the nail to look attractive in the end, you need to choose the right material for extension: the tips should be as close as possible to the width of the nail, the shape features (flat, convex). It is also better to choose a color that is close to natural.

The procedure for applying the gel has its own characteristics, if you use tips as a basis instead of own nail, but many of the steps are the same. The gel can be used in any kind.

Trim nails, do a hardware manicure, after removing the cuticle - degrease, stick the tips to a certain notch on it.
Form it the way it was intended with the help of a boat (tipsorez). To create a durable manicure, clean the surface of the tips with a nail file or cutter to a rough state. Treat the nail with a buff.
Further, the extension technology does not differ from that inherent in one or another type of gel.
After the nails grow, use cuticle oil and hand cream.

On top of these nails, you can apply any colored varnish. And it will last much longer than on your natural ones.

With natural plates

This method of extension is one of the most successful in terms of the quality of manicure. The principle of such an extension is to take your own nail as a basis and give it a great strength. In such cases, it is popular to use biogel. It provides health to natural nails, with its help it creates trendy manicure, and it also gives the nails a shine close to natural.

Biogel is recommended for owners of fragile and depleted nails, as well as for those who are afraid to spoil their relatives. - a popular procedure among those who want to minimize the trauma of the nail plate and at the same time have the goal of getting a beautiful manicure. The disadvantage of such a gel is only that they do not build up nails longer than 5 mm.

In very rare cases, both two-phase and three-phase gel coatings are used, but they are not relevant for preserving the natural nail, as they destroy its structure. If biogel is used, then it acts on the nail as a single-phase gel: it is like a base. So is the top (finish).

Advantages and disadvantages of gel nail extension

Although extended nails look very attractive and make it possible to ennoble a manicure, they have many disadvantages. The first one is . A fairly thinned nail plate is reluctant to accept the effects of special extension gels. From this, the recovery course lasts longer than wearing artificial nails.

Toxicity. Many ladies do not mean that they absorb a lot of toxic substances along with the nail coating material. Though modern facilities and try to enrich with a minimum of toxins, but still they are and are absorbed into the body through thin nail plates.
Correction Constancy. Nature always takes its toll, and even after extensions. Nails will still grow. That is, constant corrective procedures will be needed, since proper maintenance of artificial turf will not provide a presentable appearance all the time.
Burning when building up. This uncomfortable moment during extension is quite possible if poor-quality material is used or the first layer of gel was applied in a very thick layer.
Removing extended gel nails is not easy. This requires long-term sawing of the material and a margin of patience. Simply tearing off the coating is a dangerous act, which entails an unpresentable appearance nail and its unsuitability for future extension.
If you apply colored varnishes over a gel nail, then they will look very unnatural.

In any case, when creating artificial nails, it is very difficult to repeat the structure of natural ones. But even a lot of negative facts about building up do not make this procedure less popular.

Proper care of artificial nails

It would seem, well, it has increased, the problems with constant nail care have been resolved. But it wasn't there. A disregard for your gel nails can not only spoil the overall impression of a manicure, but also doom the hostess to constant additional procedures.

Can't grow your beautiful and long nails? No problem! After all, they can be increased. Do it in a beauty salon, or on your own at home. In the article we will consider step-by-step instructions with a photo, what materials are needed for this.

The technology of gel nail extension is based on the use of a special material that hardens under the influence of ultraviolet rays -. It gives the nails a glossy shine, smoothes the uneven surface of natural nails and allows you to achieve the desired length. In most cases, it does not irritate the cuticles and skin lateral ridges.

Girls give their preference to UV gel, because it:

ideally corrects the imperfections of the natural nail plate;
allows you to achieve a glossy shine of nails;
suitable for modeling popular nail shapes;
has high strength;
convenient to use;
has no smell.

On gel nails, you can create a design in a variety of manifestations. Such nails are decorated with a special decor: beads, rhinestones, sparkles, foil, volumetric elements. In addition, the surface of the gel nails is signed acrylic paints, or gel paints for design. You can buy attributes in the department for nail art.

What is needed for gel nails?

A beginner's kit for gel nails at home includes:

Extension gel.
Primer.
Degreaser.
Files for natural and artificial nails, buff.
Extension forms or tips.
Decor for nails.
Lint-free wipes.
or led.

We figured out what you need for gel nail extension. You can assemble the set yourself, or buy ready-made. With files and tools, everything is clear, we choose the decor to our liking. There are no difficulties in this. And here ? This issue should be approached seriously, because the quality of nails and the convenience of modeling them depend on the choice.

Types of gel for nail extension

According to the type of use, the material is divided into UV gel, biogel and Led gel. To work with the first two, you need a high-quality ultraviolet lamp, for the third - an LED lamp.

According to functionality, gel modeling systems are divided into: three-phase, two-phase and single-phase.

First, it is a three-phase system, it includes three types of gel with a specific purpose. To ensure perfect adhesion, the first layer of base gel is applied, which is responsible for the reliable contact of the nail plate with non-natural material.

Next, a second layer of modeling gel is applied, which is responsible for the body of the nail. And the last layer is the finishing gel. It will protect the nail, protect it from the effects of external factors, while providing a bright and smooth surface.

The second is a two-phase system. One type of gel serves simultaneously to connect and fix, and the second is responsible for the design of the nail.

And the third is a single-phase system. It uses a universal gel that performs all three functions.

You probably have a question, which of the three systems to choose?

There is no exact answer, since each master chooses for himself. We can only advise you to try each modeling system, then you will be able to understand exactly which material is easier for you to work with.
As for brands, the advice is the same. It is necessary to choose for yourself experimentally. At first, you may have to spend a lot of money in search of the perfect gel. You can start with the most popular ones - CND Brisa, Masura, In'Garden, IBD Gel, RuNail. According to reviews, they perfectly perform their functions and allow you to work at a professional level.

The price of gel for nail extension can be different. And it depends on many factors: functionality and brand. The cost of color gel starts from 150 rubles and above. Basic and finishing cost from 300 rubles and more.

Stages of gel nail extension technology

So, we put together a set and decided what you need for gel nail extensions. Now let's move on to modeling. Gel nail extension technology is possible even for a beginner, if all actions are performed consistently and correctly.

If you want to do gel nail extensions yourself, then step-by-step instruction photo will help. Each stage of nail modeling using this technology is important, so try to observe every little thing. The instruction is suitable for building yourself or a client.

1. Preparation of the nail (treatment of hands, removal of the cuticle by uncircumcised or trimmed). For the best effect, the surface of the nail is polished and degreased. After a thin layer of primer is applied to the nails to remove excess moisture. The primer should be dried in a UV lamp for 2 minutes.

2. The form for modeling nails is established. It can be either upper or lower forms for building up. We wrote about them in. They must be fixed tightly and at the right angle.

Form setting

3. With the help of a special brush, the base gel is applied to the nail, and in no case should it be allowed to touch the skin and flow into the side rollers. To do this, leave a distance of half a millimeter from the skin to the gel. At this stage, a preliminary shape of the artificial nail is formed. It can be square, stylet-shaped, almond-shaped or another shape. Next, the gel is dried under ultraviolet rays of the lamp for several minutes. The base layer is ready.

Base gel application

4. Next, apply the next layer of modeling gel. It is better to repeat this procedure a couple of times, for greater hardness and reliability of the nails. Layers should be made thin. At this stage, the nail is decorated with decor, sparkles, stickers, painting, etc. are added between the layers. A free edge smile is formed if done French manicure. Dry each layer in a UV lamp for 2 minutes. By the way, it is very convenient if your lamp is with a timer, you will not need to time it with a stopwatch.

Working with modeling gel

5. Move on to the final layer of gel nails. The finishing gel is carefully applied, dried in a lamp for 2 minutes. Then removed sticky layer. With the help of a file for artificial nails, the shape of the free edge of the nail is honed to perfection, and irregularities on the surface are also removed.

Completion of nail modeling

6. The polishing buff creates a gloss on the surface of the nail.

Video tutorials for gel nails for beginners

So that you can clearly appreciate the beauty of gel nail extension technology, we suggest watching video tutorials for beginners. Recommendations and advice are given by experienced masters in modeling gel nails.

The average duration of this process is about three hours, at the end of which you get persistent and perfect nails.

The procedure for nail extension cannot be called a complicated process; almost everyone can master it. Modern nail masters use two technologies - nail extension on forms and tips, and the first is more popular with both masters and clients. If you decide to comprehend this skill, it will be useful for you to find out what nail extension on forms is, what forms there are and how perfect nails are created with their help. We'll talk about this.

What is nail extension on forms

Nail extension on forms involves the use of artificial templates. They are substituted under the free edge of a real nail, creating a continuation of it. From above, the master distributes gel or acrylic. After the material has hardened, the template is removed, and the artificial nail is filed with a file. For the convenience of the wizard, there is markup on the templates. To carry out nail extensions on forms, the free edge of a natural nail must be at least 1-2 mm, otherwise it will not work to put a template under it.

What are the extension forms?

Depending on the material of manufacture, disposable and reusable templates are divided, as well as upper forms:

Disposable have a paper base coated with a metal or polymer. Their advantage is low cost and the ability to independently adjust under the arch of the nail with the help of manicure scissors. Their minimum price is 10 rubles for 10 pieces.
Reusable have a wire frame and are made of Teflon. They are easier to use due to their rigidity. The cost is from 600 rubles for 10 pieces, but such a set will serve you for a long time.
The upper molds are made of transparent silicone and follow the curves of the plate. If you want to build up your own nails, it will be most convenient to do just that. They have different size and are suitable for use with both gel and acrylic. The price is about 100 rubles for 10 pieces.

Why are forms better than tips?

Each master chooses for himself which technology he prefers. It is believed that the gel on the forms looks more natural than on the tips, but the second technology is simpler. There are also fundamental differences between these technologies, and in some cases, tips simply cannot be used:

If natural nails are flat and wide, it will be very difficult to pick up tips, but paper blanks can be cut to the desired size.
If the nails are bent down, the tips won't fit either, as the curved plate will make it difficult to fix the tips.
The disadvantage of building on tips is that they are attached with glue, which, with frequent contact with water, gradually dissolves and nails can peel off. The most vulnerable point is the gluing zone of the tips, if they are not glued correctly, the nails can fall off almost immediately.
If the plates are too sensitive to sanding with a file, it is better to choose templates.
Acrylic or gel on the forms allows you to create a solid monolithic structure of the marigold. At the same time, the result looks natural and elegant, featuring high strength.

Allows the master to reveal his full potential, creating an unusual design and non-standard outlines of the free edge. However, in order for the nails to look aesthetically pleasing and durable, you need to know all the subtleties of technology and template substitution. Here our lessons of nail extension on the form using gel and acrylic will help you.

Building lessons on forms for beginners

Before considering the step-by-step nail extension on the forms, we will prepare the necessary materials and tools. In addition to templates, you will need:

Gel or acrylic, depending on your preference.
Brushes for applying material.
Orange stick for cuticles.
Brush for shaking off dust after filing a nail.
Acid primer for acrylic or essential primer for gel.
UV lamp.
A set of files of different hardness for grinding and polishing.
If you want, replace the nail polish remover with acetone-free nail polish remover. The same tool can be used to clean brushes from materials.
Antiseptic for maintaining the sterility of instruments and hands.
Cuticle oil.

Gel nail extension on forms

Regardless of whether you chose reusable or disposable templates, gel nail extension on forms is carried out according to the same scheme:

First of all, hands must be treated with an antiseptic. If you build up nails not for yourself, both your hands and the client's hands are processed.
Push the cuticle back with an orange stick.
Using a soft file, the surface of a natural nail is processed. You do not need to cut the plate too much, it is enough to remove the natural shine. This will ensure their reliable coupling with the gel.
If your nails are long, file off the free edge, leaving 1.5-2 mm.
We remove the dust with a brush and degrease the nails.
We put the template and fix it under the free edge of the plates. For the template to sit correctly, its curve and the smile line of the plate must match. There should be no gaps between them. If you chose paper templates, adjust them with nail scissors. Teflon templates should be brought under the free edge and fixed with a wire on the finger. The form should completely go under the corners of the free edge of the nail. Look at the finger from the side - it should not be too far up or down.
Apply primer and let it dry.
After that, using a brush, apply a layer of gel to the entire natural plate and template to the desired mark, retreating from the cuticle half a millimeter. Hold your finger at a 45-degree angle to prevent the gel from running onto the cuticles and skin on your finger. Try to immediately set the shape of the free edge. Pick up the gel with a brush in small drops, and then, as it were, stretch them on the nail.
Repeat the application of the gel layer. When applying the material, look at the finger from the side, the arch of the nail should follow the shape of a crescent.
Place your hand under the lamp.
Remove the sticky layer with a special tool.
After the gel has hardened, the templates are removed in the direction from the free edge to the palm. If the gel is bent along with the template, then it is necessary to dry it in the lamp.
With a file of 100-180 grit, give the free edge the desired shape and length. Gel nail extensions on beginner forms are best done using a 180 grit file, you won't be able to cut too much with it. When filing the gel at the cuticle and side ridges, remember that the transition from artificial to natural nails should be smooth.
Brush off the dust after sawdust.
Apply a thin layer of gloss gel. It is applied very thinly, as if you are painting your nails with varnish, blocking the junction of the gel and the natural plate.
Dry under the lamp for about 3 minutes.
Remove the sticky layer.
Finally, oil is applied to the cuticle and carefully rubbed into the skin.

Acrylic nail extensions on molds

On the forms, as well as using the gel, it begins with the preparation of the nails: filing their length and pushing back the cuticle. After that step-by-step scheme action is as follows:

A layer of acid primer is applied to the nails. It will provide the necessary adhesion of acrylic and natural nail.
If the primer requires drying in a UV lamp, place your hand under the lamp for 2 minutes.
Remove the sticky layer with a degreaser.
Sand the surface of the nail with a file.
Put on the templates.
Prepare liquid and acrylic powder.
Dip the brush in the liquid and dip into the powder.
An acrylic ball will be formed on the brush, which must be distributed on the plate with a brush.
Take another drop of acrylic and continue modeling the nail.
Acrylic dries without a lamp. It will take about 5 minutes to dry. After that, you can work with a file, giving the nail the desired shape and length. Pay special attention to the junction of acrylic and natural plate.
Small roughnesses are removed with a buff.
Brush off dust after filing.
The final step is applying the top coat. Dry it under the lamp for about 2 minutes.
Remove the sticky layer with a degreaser.

Remember that acrylic nail extension on forms should be carried out in a well-ventilated area, as the material has a specific pungent odor.

Video: How to fix the extension template

If you can’t grow your own long nails, and no means to strengthen them help, you need to use the new technologies of the modern nail industry. A phased gel nail extension will instantly transform your hands, all that remains is to choose the appropriate design, make stylish manicure on new, long, strong nails.

Features of gel extension

The use of a polymer coating that hardens under ultraviolet rays has become the basis of a new manicure technology. Quality materials do not cause allergies, and new nails cannot be distinguished from real ones. The procedure does not take much time, does not cause discomfort, can be carried out independently. To do this, you just need to purchase special materials with tools, build up the plates, and then carry out their systematic correction, properly care for them.

Types of gels for nail extension

The process of building up, modeling is carried out in two main ways (with one or three phases), for each of which a composition of a certain type is used:

Single phase thin coating. Ideal for beginners, contains only three layers, has a liquid consistency.
Three-phase material for professionals, consisting of a base, sculpted, protective coating.
For sculptural modeling, a camouflage polymer is used that hides the defects of a natural plate.
Gel chewing gum is used to lay out the lengthening of a natural plate, the consistency is more like plasticine, it is convenient for creating a multi-colored stained glass manicure.
Resin - a kind of modeling material, has a higher strength, price.
Faber glass is a material used in assistive technology.

Popular brands of gels used in the nail industry:

Nubar IBD extension gel is a hypoallergenic material made from natural ingredients. Ezflow is an easy to use formula with a nice texture.
Nubar is a material suitable for home use.
CNI is one of the newest tools for professionals.
Global is a medium viscosity sculptural material.

gel nail technology

Gel extension is carried out according to two main technologies: on tips, on forms, three-, two- and single-phase method. The choice of method depends on the desire of the client, the condition of his nail plates. In any case, nails extended with gel require correction, because when they grow, the border between the natural and polymer plates becomes noticeable.

The three-phase technique is more often used in professional manicure, it is carried out in three stages using a base, sculptural, protective gel.
Two-phase technology involves the application of a base and a modeling polymer layer.
A single-phase procedure is carried out in one stage using universal gel, which performs the functions of the base, sculptural and protective.

For tips

Ready-made artificial nails, which are glued to natural ones, and then treated with a gel, are called non-removable tips. They are recommended for use when building plates of short or irregular shape. The procedure is carried out in one, two or three phases, includes the following main steps:

hand preparation;
gluing tips;
sawing (modeling of length and shape);
gel treatment;
design.

On forms

Gel modeling on forms is only suitable for long "native" marigolds. With this tip-free technology, a special stencil (form) is used, which is applied to a natural plate, covered with a layer of gel, and allowed to harden. In this way, the length of the natural plate is increased without using other artificial hard overlays. The procedure is carried out in one, two or three phases, includes the following steps:

preparation (sawing, degreasing, matting);
stencil overlay;
gel treatment;
removal of the form;
processing of artificial turf;
design.

Necessary materials and tools for building

For a professional or home gel manicure, the following tools and materials are required:

UV lamp for manicure ultraviolet lamp;
gel - universal or a set of base, sculptural, finishing polymer coating;
tips and / or forms (disposable, reusable);
glue for tips;
abrasive files for natural and polymeric nails;
primer;
guillotine for tips;
disinfectant;
towel;
polishing buff;
manicure brushes.

Step by step description of the procedure

If you want to master the process of step-by-step gel nail extension, then stock up on all necessary materials and follow the step by step guide:

Antiseptic treatment of the hands of the master and the client.
Treatment of the nail plate. The cuticle is pushed back with a special spatula, the nails are matted (shine is removed), degreased.
Gluing tips or fixing forms (stencils). The procedure is carried out for each individual finger.
Polymerization. Layers of gel should be applied to the nail plate, each cured with ultraviolet light. All fingers are treated in turn.
Modeling of nails. With a napkin and a file, they remove all unnecessary, adjust the length and shape of the extended plates.
Nail design.

gel nail care

The nail extension procedure itself is not enough to make the hands look neat: so exquisite beauty need to support proper care. How to protect extended nails, what to fear, what rules to follow? Let's figure it out:

Carry out the correction twice in the first month after the build-up, in the subsequent ones - once.
Protect nails from sharp blows, use clasps, pins, press buttons, etc. with caution.
File polymer nails only with fine abrasive tools, do not use metal files.
Use a special base for varnish.
Remove regrown cuticles with softening oil or other by special means. Use nail polish and nail polish remover without acetone.
Wear rubber gloves when using detergents.
Keep away from very hot air and water.

Video tutorial on nail extension

Even a step-by-step process is often incomprehensible. To finally understand the phased gel nail extension, watch the video about the professional gel manicure procedure. The process, starting with the treatment of hands with an antiseptic and ending with nail design, the master accompanies with useful comments for each of his actions.

Find out in what sequence you need to process your nails, how to use the forms correctly, apply a polymer coating, how long it takes to dry it under an ultraviolet lamp. See what degree of abrasiveness to use nail files, how to remove glossy shine from nails, what movements to file extended nails, how to apply decorative varnish on them.

Until recently, girls with short nails could only dream of a beautiful manicure.

Eternal problems - nails are ugly, peel all the time, break, it is impossible to grow them - already in the past.

With the help of gel extensions, you can give them any length and shape. And the dimensions of the nail plate are a field for creativity and the embodiment of the fantasies of any nail master.

Let's talk about how complicated the procedure is and what are its advantages.

Advantages and disadvantages

This is a modern and safe way extensions with many advantages:

The procedure takes relatively little time.
The material hardens under the influence of ultraviolet rays, does not cause allergies.
It is worn for a long time, does not violate the structure of the nail plate.
At the end of the procedure, it looks natural and natural.
Does not smell during the application process and after.

The procedure also has disadvantages. Artificial nail can break on a direct hit. But isn't the natural afraid of such injuries?

Most likely, after that you will have to say goodbye to him, cut off all the rest to his length. And artificial is easier to restore and give it a beautiful look.

What materials should be prepared at home

Many who first did gel extensions wondered: what lengthens the nail plate? Here you can not do without additional material.

At the base of the long neat manicure lie:

Which base to choose for lengthening standard flat nail plates depends on the master and the preferences of the client.

After the procedure, you need to choose a design: now at the height of fashion! Find out all the details about it - what you need, how to do it yourself.
If you are brown-eyed, but do not know at all how to make up your eyes to emphasize their expressiveness, make-up ideas for brown eyes in a separate post.

What else is needed for the procedure: a list of the starter set of tools

Before starting work make sure you have the next set:

UV lamp;
tips or forms;
means for disinfection;
adhesive remover;
finishing gel;
flat brush for applying material;
a set of files;
orange stick;
tweezers;
primer;
polishing pad;
glue for tips.

In the process of preparing nails for gel extension, it is important to familiarize yourself with the anatomy of the nail plate in advance so as not to cut off the excess:

Before proceeding with the build-up, you need to follow the following simple rules.

It depends on how high-quality the manicure will turn out, and how long you can enjoy it:

We do not recommend using hand creams on the day of the procedure. This may interfere with the fixing of the gel on the nail plates.
Take care of the condition of the cuticle in advance.
Taking antibiotics or hormonal drugs is not compatible with building. It also interferes with the adhesion of materials to the nail plate.
The procedure is done only on healthy nails.

Most of these rules are individual. But in practice, they still work more often.

It’s worth immediately deciding what form the future manicure will have:

The extension process takes a lot of time. To get results, better prepare ahead of time. What's more, it's easy.

If you are preparing to go to a wedding celebration, find out all about. Please your loved ones without spending too much from the family budget!
Do you want to look not only more stylish, but also younger? Have tightened skin, neat facial features? in the photo before and after facial contouring - this procedure may suit you.
General magnetotherapy is a useful healing procedure that helps with diseases of organs and body systems. About her indications and contraindications in a separate informative article.

Working with tips

For a beginner, this method is easier and takes less time.

Step-by-step technology, the procedure for gel nail extension on tips is presented in the photo below along with a description:

Stages:

We treat our hands with an antiseptic. The nail plate must dry completely.
Push back the cuticles with an orange stick.
We file the nails under the shape of the tips.
Gloss from the surface is gently removed with a sanding block.
Once again we use an antiseptic, remove the remnants of the product and dust with a napkin.
The size of the tips is selected for each nail.
A small amount of glue is applied to the tip hole. It is pressed tightly for 10 seconds. Excess glue is removed.
Tweezers give the desired length. Use a nail file to give the desired shape.
Once again we process the surface of the nail plate with a buff. Periodically remove the remaining dust with a brush.
On natural nail primer is applied.
After the liquid is completely dry, the surface is covered with a gel. Make sure that it does not get on the cuticle, skin. The hand can be turned over so that the solution is evenly distributed.
Drying in an ultraviolet lamp for 3 minutes.
Apply the gel again, dry again.
Remove the sticky layer with a special tool. We use lint-free wipes.
Degrease the surface, apply a finishing agent.
Place your hand under the lamp for another 3 minutes.
Remove the sticky layer again.
We process the cuticle with oil.

This video with step-by-step instructions for gel nail extension on tips is a fairly understandable video tutorial for beginners.