How to determine the size of mittens. Sizes Sizes of women's mittens
Determining the size of fur hats
The size of the headgear is determined according to the metric system, by measuring the circumference of the head using a measuring centimeter tape. Wrap the measuring tape around your head so that it passes over the eyebrows, through the tips of the ears and the back of the head. Record the reading at the intersection of the tape and this will be the metric size of your head. The headwear size table below shows the international size standard and metric, if you know one of these methods, then it is easy to calculate the other using this table.
Headwear Size Chart
| Euro. | XXS | XS | S | M | L | XL | XXL |
| Meter.(cm) | 50-51 | 52-53 | 54-55 | 56-57 | 58-59 | 60-61 | 62-63 |
Whole fur hats
If you liked all-fur hats, be sure to write the exact size of the head in the metric system in the comments of the order during checkout. This is necessary in order for us to more accurately select the size, since all-fur hats do not have a stretchy base and require accurate data on the size of the head.
Knitted hats
Regarding fur hats based on a knitted blank, they are less demanding on exact dimensions, as they have the ability to stretch, which makes it easy to choose the size fur hat by choosing one of the proposed, suitable sizes on the product page.
Sizes of mittens or gloves
Gloves and Mittens are usually sized in French inches, but we will use our native Russian centimeters for convenience. To determine the size, use a centimeter tape to measure the circumference of the hand, in the middle of the palm as close as possible to the base of the thumb, do not tighten the tape too tightly. Be sure to use a centimeter scale to avoid errors. Fix the result for the intersection of the tape and compare it with the table of sizes of mittens and gloves located below.
Size chart of mittens, gloves.
| Palm circumference (cm.) | Ros. size standard | M | AND | D |
| 27 | 10 | XL | XXL | — |
| 26,5 | 10 | XL | XXL | — |
| 26 | 9,5 | L | XXL | — |
| 25,5 | 9,5 | L | XXL | — |
| 25 | 9,5 | L | XXL | — |
| 24,5 | 9,5 | L | XXL | — |
| 24 | 9 | L | XL | — |
| 23,5 | 8,5 | M | XL | — |
| 23 | 8,5 | M | XL | — |
| 22,5 | 8 | M | L | — |
| 22 | 8 | M | L | — |
| 21,5 | 8 | M | L | — |
| 21 | 8 | M | L | — |
| 20,5 | 7,5 | S | L | — |
| 20 | 7,5 | S | L | — |
| 19,5 | 7 | S | M | XL |
| 19 | 7 | S | M | XL |
| 18,5 | 7 | S | M | XL |
| 18 | 6,5 | — | M | XL |
| 17,5 | 6 | — | S | L |
| 17 | 6 | — | S | L |
| 16,5 | 5,5 | — | S | L |
| 16 | 5 | — | XS | M |
| 15,5 | 4,5 | — | XS | M |
| 15 | 4 | — | — | S |
| 14,5 | 3,5 | — | — | S |
| 14 | 3 | — | — | XS |
| 13,5 | 2,5 | — | — | XS |
| 13 | 2 | — | — | XS |
| 12,5 | 1 | — | — | XS |
| 12 | 1 | — | — | — |
Don't have your size?
If on the product page there is no choice of the size of the mittens that you want to order, then choose any one, and during the ordering process, indicate the size that you are interested in in the comments. If you are interested in mittens on a knitted basis and the size is not in the selection list, but the difference is 1 or 2 centimeters, then with confidence choose the size of the mittens that is closer to yours in the list. Thanks to the knitted base, which has the ability to stretch, the choice of size is facilitated.
Sizes of vests or coats
The sizes of fur vests and fur coats are determined by three indicators: Chest, waist and hips. To accurately determine the size, be sure to take all measurements with a measuring tape (required measurements are located in the table below). If the measurements differ from the sizes indicated in the table, then choose the one that best fits yours. But still, we strongly recommend that you enter all the measurements that you recorded in the comments during the ordering process, it is also advisable to indicate your height. When ordering fur coats, it is also required to measure the length of the arm from the shoulder to the base of the hand and also report it in the comments to the order.
Vests or coats
| R. | 33-35 | 36-38 | 39-40 | 40-42 | 43-45 | 46-48 | 49-51 |
| O.g. (cm) | 60-63 | 64-68 | 78-80 | 80-84 | 85-89 | 90-95 | 96-101 |
| From. (cm) | 57-60 | 61-65 | 60-64 | 63-67 | 68-72 | 73-77 | 78-82 |
| About. (cm) | 59-62 | 63-67 | 84-86 | 87-91 | 88-93 | 94-98 | 99-104 |
Are accurate measurements required?
As they say, "Accuracy is the courtesy of kings!!". Accurate measurements are required, as there is a risk of choosing the wrong size of a fur vest or fur coat, which is fraught with unnecessary costs of money and time for returning the goods.
Determining the size of fur slippers and booties
The size of fur slippers or booties is determined according to the metric system, well known to us. To measure, we need a sheet of A4 paper, a pen or pencil and a thirty-centimeter ruler, or measuring tape. First, lay the sheet on a flat floor surface, put your foot on the sheet and circle it with a pencil or pen. You will get a silhouette on the sheet, attach a ruler or measuring tape to the drawing so that the ends of the ruler fall on the most distant parts of the foot drawing. Record the result in centimeters and this will be the size of your foot in the metric system. Below are sizing charts in case you know the general standard for your size and don't really feel like taking measurements.
Shoe Size Chart
| Meter. system (foot length, cm) | M | AND | D (sub.) | D |
| 29 | 47 | — | — | — |
| 28,5 | 46 | 45 | — | — |
| 28 | 45 | 44 | — | — |
| 27,5 | 44 | 43 | — | — |
| 27 | 43 | 42 | — | — |
| 26,5 | 42 | 41 | — | — |
| 26 | 41 | 40 | — | — |
| 25,5 | 40 | 39 | — | — |
| 25 | 39 | 38,5 | — | — |
| 24,5 | 38,5 | 38 | 40 | — |
| 24 | 38 | 37,5 | 39 | — |
| 23,5 | 37,5 | 37 | 38,5 | — |
| 23 | 37 | 36 | 38 | — |
| 22,5 | 36 | 35,5 | 37,5 | — |
| 22 | — | 35 | 37 | — |
| 21,5 | — | — | 36 | — |
| 21 | — | — | 35,5 | — |
| 20,5 | — | — | 35 | — |
| 20 | — | — | 34,5 | — |
| 19,5 | — | — | 34 | — |
| 19 | — | — | 33 | — |
| 18,5 | — | — | 29 | — |
| 18 | — | — | 28,5 | — |
| 17,5 | — | — | 28 | — |
| 17 | — | — | 27 | — |
| 16,5 | — | — | 26 | — |
| 16 | — | — | 25,5 | — |
| 15,5 | — | — | 25 | — |
| 15 | — | — | 24,5 | 24 |
| 14,5 | — | — | — | 23 |
| 14 | — | — | — | 22,5 |
| 13,5 | — | — | — | 22 |
| 13 | — | — | — | 21 |
| 12,5 | — | — | — | 20 |
| 12 | — | — | — | 19,5 |
| 11,5 | — | — | — | 19 |
| 11 | — | — | — | 18 |
| 10,5 | — | — | — | 17 |
| 10 | — | — | — | 16,5 |
No size listed?
Sizes for fur slippers and booties are not particularly demanding on exact data, as they are slightly elastic. If you are a supporter of accurate data, and your size is not in the selection list, then simply indicate the exact size in the comments to the order during checkout. It is worth noting that as the size increases, the cost of fur slippers will increase, as they have more consumables.
There are many situations when, in order to perform a particular job, the usual casual wear does not fit. So, for example, in the village in winter - you need to bring water, and chop firewood, and clean the snow from the paths ... What can we say about various professional activities - at the same construction site, you can’t do without such a thing as working clothes. An important element of it are work gloves. With their help, you can reliably protect your hands and not dirty expensive gloves.
Varieties of work gloves
There are a great variety of work mittens and gloves today. Each of them is designed to perform a certain type of work. This factor must be taken into account when choosing, because they carry different type risk to the health of the working person. For example, there are glaziers' mittens and gloves that are highly resistant to cuts. Gloves and mittens used in the chemical industry must reliably protect against chemical reactions and burns that may occur when exposed to unprotected skin areas. For builders, they are designed to protect against the harsh environment.
The most popular and common are gloves and mittens that have a polyvinyl chloride coating on a cotton basis. This fiber provides, on the one hand, excellent air circulation, and on the other hand, it protects hands from exposure to cold and various allergic manifestations. PVC coating in them is necessary for high-quality grip without slipping - this significantly extends the service life of the product.
Lightweight gloves should be used for precision work, as they provide the necessary sensitivity to workers' fingers. When working in traumatic conditions, on the contrary, it is necessary to use dense products, the back side of which is equipped with a polyester thread, which increases their service life.
It is also necessary to mention such mittens as leggings. They are simply necessary for welding work, because they protect against spatter and burrs. These work gloves are different types- one-, three- and five-fingered. The former are the most economical, and the latter, on the contrary, are the most expensive, but at the same time any type of welding can be performed with them, while with single-fingered electrodes only. Three-toed leggings are an intermediate option, both in terms of price and area of use.
Determining the size of work gloves
After choosing the right type of work gloves, you need to determine their size. To do this, you need a centimeter tape, with which you can measure the girth of the hand at the articulation of the fingers. It is this parameter, rounded up to a whole number, that is decisive when choosing the size of gloves. The measurement is made as follows. The volume of the entire palm is taken above the bones, while thumb hands are not captured. The centimeter tape is led to the point of squeezing the fingers, which is the widest point on the hand. The standard sizes of work gloves are.
Many people are so used to the fact that there are mittens that they don’t even realize how important this element of the wardrobe is in Everyday life during the winter season. After all, mittens are much better than gloves to protect from the cold and are especially suitable for children. In addition, mittens are individual and comfortable, but not everyone knows how to determine the size of mittens so that they fit you perfectly.
The history of mittens until today
Hand knitting and handmade items are highly valued in modern fashion. Batik, embossed and jacquard knitting, and openwork capes are very popular nowadays. Mittens, which are relevant, original, interesting and stylish, are no exception. And using mittens complete with a hat and scarf, you certainly look amazing. The main thing is to know how to determine the size of mittens.
Mittens have been around since the 13th century. They were called sleeves, and bushes, and mittens, but were worn mostly by peasants in order to make it more convenient to work. Women's mittens have always been patterned and colorful, while men's mittens have always been darker and more concise.
Mittens were worn differently before. Several pairs were put on at the same time - first, crocheted mittens - lighter, and then they put on fur mittens. The fur of fur mittens was outside.
If mittens were worn to perform handmade, then they used canvas or leather mittens, in addition, they used mittens woven from horsehair. They were rougher, wore out less. Festive option there were mittens with bright ornaments, patterns.
After the peasants began to wear this element of the wardrobe, it began to appear among noble persons. They were far from manual labor in the cold, so to warm the hands they used long sleeves lined with fur from the inside. But, having used peasant mittens, they liked them. True, they were thus transformed into products made of expensive fabrics trimmed best fur, stones and patterns.
At the moment, knowing how to determine the size of mittens, you can knit mittens of various thicknesses using various materials, decorating with suede, stones, embroidery. Mittens are very comfortable winter accessory and goes well with any winter outfit.
What measurements are needed to determine the size of the mittens?
Mittens should be chosen taking into account the fact that they should not be too close to the hand, leaving room to move the fingers, but should not be too large, otherwise cold air will penetrate inside.
In addition, you need to determine the size of the mittens, considering whether they will be turned off with fur or will simply be made of thin skin.
To determine the size of the mittens, you need only one measurement, which will measure the palm at its widest part. As a rule, this is the space that forms in the middle of the palm under the four fingers and above thumb, if guided by the wrist. After you have taken the measurement, divide the resulting value by two and thus you will get the size of the mittens. For example, for a wrist of 18 cm, the size of the mittens is 9.
How to choose mittens?
Knitted mittens you can choose so that they tightly cover the skin, but it is better to choose the size of mittens with fur with a small margin. Leather mittens must be selected exactly according to the hand, as the skin tends to stretch. The same applies to suede mittens.
Mittens should be comfortable and comfortable so that the hand does not slip out of them, but, nevertheless, the fingers inside the mittens can move and move freely.
If you pick up mittens with a pattern, embroidery or pattern, make sure that the mittens have a lining that will prevent the decor from rubbing your hand while wearing mittens. When choosing lined mittens, choose the right fit.
Methods for determining the size of mittens and gloves.
Winter is on the threshold, in some areas the first snow has fallen for a long time. This means that it's time to warm up, that is, to purchase or knit gloves, mittens. Now most people order new clothes on various Internet resources. In this article, we will help you decide on the size of gloves.
The hand measurement scheme itself is very simple. The following measures need to be taken:
- The volume of the brush from the index finger to the little finger. Keep in mind that the centimeter tape should pass strictly along the bones.
- After that, determine the distance from the beginning of the brush to the tip of the middle finger.
- Measure the distance from the little finger to the wrist. Then measure the length of your thumb.
- You will also need the distance from the beginning of the thumb to the wrist.
The easiest way to do this is on paper. To do this, spread a sheet of A4 paper on a hard surface and place your palm on it. Outline to the wrist. Fingers should be slightly apart.
Sizes of mittens and gloves for children, women and men: table
There is a special table by which you can determine the size of mittens and gloves. For the first time this sizing system was invented in France. The sizes correspond to the volume of the wrists in inches. To determine the size according to the table, it is enough to measure the full girth of the palm in the area of \u200b\u200bthe bones, where the index finger and little finger begin. Find the resulting numerical value in the table and the size that corresponds to it.
How to determine the size of mittens according to the table?
The procedure for determining the size of mittens:
- Palm circumference (measure the widest part of the bones)
- Wrist volume
- Palm length from wrist to tip of middle finger
- Hand length from wrist to beginning of thumb
- Thumb length from tip to fingertip
determine the size of the mittens according to the table How to calculate the size of a knitting mitten?
Everything is quite simple. You can determine the size by the parameters of your hand. This takes into account the thickness of the yarn and the diameter of the needles. The tighter the knit, the more yarn you need. At the same time, knitting patterns, such as plaits and braids, increases wool consumption by 30-40%.
On average, knitting women's mittens requires 100-120 g of yarn. In order to knit children's mittens, you need 60-70 g of thread. The number of loops for knitting mittens can be found in the table. In this case, knitting usually begins with a brush and is carried out in a circle on 5 knitting needles.
For knitting the cuff, knitting is used. To do this, knit through one front and back loops. This knitting allows the cuff to stretch when put on.
calculate the size of knitting mittens
This table will help you figure out how to knit mittens for adults and children. It indicates the exact number of loops for knitting all parts. That is, how many loops are needed to knit the thumb, hand and palm. The table shows the sizes of children's, men's and women's mittens.
Determining the size of mittens and gloves is quite simple. To do this, you need to measure the volume of the wrist and the length from the hand to the tip of the middle finger.
Children's clothing sizes
In order to choose children's clothes of the right size, you need to take measurements correctly. It is recommended to measure the baby every time you buy a new thing. Children grow quickly, so measurements taken two to three months ago will not be entirely accurate.
Carefully, slowly measure the baby!
- The growth of babies (up to 2 years old) is recommended to be measured in the prone position. Lay your child on a flat surface and use a tape measure to measure their height from head to toe in a straight line. Place a child older than two years of age at the doorway. Attach a ruler to the crown of your head parallel to the floor, mark with a simple pencil on the door jamb the place where the ruler touches. Then measure the distance from the mark to the floor with a tape measure or tape measure - the resulting value will be an indication of the child's growth.
- Chest girth - according to the principle of taking measurements in adults: we stretch a centimeter tape around the body at chest level.
- Hip circumference - measured with a centimeter tape, which should be on the buttocks.
- Waist circumference - around the waist, we ask the baby not to pull in the stomach.
With precise parameters, you can easily determine right size. To do this, compare the obtained data with the results in the table.
Headwear sizes
When choosing a headdress, the circumference of the head should be taken into account. The resulting measurement will be equal to the size of the cap. When taking measurements from the circumference of the head, make sure that the centimeter tape does not stretch too much, it should sag quite a bit, so that then the headgear is not small and does not squeeze the head of the baby.
The table below will help you make right choice!
Sizes of children's shoes
The size of shoes for children in the Russian system is determined based on the length of the child's foot (from the most prominent point of the heel to the most protruding toe). You can measure the length of the foot using a sheet of paper, tracing the contour of the child's legs on it.
To accurately determine the size of children's shoes, the baby's feet must be measured at the end of the day (because the foot becomes slightly larger by the end of the day). In this case, you should put on socks or tights with which the child will wear the selected shoes, and measure the size of the foot, taking into account the thickness of the socks (tights). In addition, it is imperative to measure both legs of the child, and from the results obtained, focus on a large figure. If your child's foot length falls between sizes, you should round the result up to the size: for example, if the foot length is 11.8 cm, the child's shoe size will be 20, not 19.
Below is a table that allows you to determine the size of a child's shoes according to the Russian standard.
Sizes of children's socks and tights
The size of socks, golf is determined by the length of the child's foot in centimeters. There are dimensional grids after 1 cm and after 2 cm for even values, like most Russian manufacturers. How to determine size? Measure the length of the child's foot and round up to the nearest whole value in centimeters. For example, for a foot length of 10.3, socks 11 or 12 are suitable.
The size of tights, leggings corresponds to the height of the child in centimeters and is designed for a standard foot length. The size range is the same as for clothes, only two heights are always indicated at once, for example, 74-80. This means that children's tights in size 74-80 will fit a little man with a height of 69-80 cm. If the legs and buttocks are plump, then tights in size 74-80 will fit a baby with a height of 63-74 cm.
According to Russian GOST, the sizes of children's tights must correspond to a certain foot length. We have provided these data in the table below. And for the convenience of determining the size of tights, the table indicates the approximate age of the child.
Sizes of children's gloves and mittens
In order for the gloves to warm the child well, they must be a little too big for him. It should be noted right away that there is no single standard regarding the size of children's gloves. So, in the post-Soviet countries, the size of these accessories for children is determined by the girth of the palm in centimeters. In this case, the thumb is not taken into account. That is, if you measured the baby’s palm and got a value on the measuring tape equal to, for example, 10 centimeters, then the corresponding glove size will be 10.
As for the international scale of children's sizes, you can find out the size of gloves both from the tables that are always available on the websites of foreign online stores, or simply focusing on the age of the baby.
We hope the chart below will help you choose the correct size:
Sizes of women's clothing and underwear
Choosing the right nursing bra is very important. After all, a properly selected bra is, first of all, good health, attractive appearance, and, as a result, the excellent mood of a nursing mother!
In order to correctly determine the size of a bra, you need to take two measurements:
1. The first measurement is chest circumference (chest volume). The centimeter tape runs along the most protruding points of the chest, strictly horizontally, fits freely and does not tighten the chest.
2. The second measurement is the girth of the back (volume under the bust). Press the measuring tape firmly under the bust.
It's better to have someone else take the measurements from you. for an accurate measurement, it is necessary that the woman stand with her hands down while taking measurements. The size of the bra is determined by two parameters - a number and a letter. The number is the circumference under the bust in centimeters, and the letter is the size of the cup (more details in the table).
