home » Relationship » Paper flower arrangements. Wreaths in the technique of quilling and trimming

Paper flower arrangements. Wreaths in the technique of quilling and trimming

A beautiful element of hair decoration, of course, is a beautiful wreath of flowers. If natural flowers able to wither quickly, then a wreath of paper flowers will be unique in that it will not fade!!! It is best to choose to create such a wreath bright paper, because in this case you get a very beautiful and original hair accessory!

Necessary tools and materials to create a wreath of paper flowers:

- green wire of various thicknesses;

- corrugated paper of various colors;

- stencils with petals and flower leaves;

- wire cutters;

- scissors;

First stage. Making paper chamomile

First you need to cut a thicker wire into pieces of 4-5 centimeters. The size of the number of pieces will depend entirely on the required number of flowers in the created wreath.

Then you will need to cut green corrugated paper into strips. After that, you need to grease the paper strip with glue and start wrapping it around the previously cut pieces of green wire. The first turn of paper must be held with your fingers at the end of the wire, and the paper itself must be wrapped tightly, directing it diagonally. Then, at the end of the opposite wire, the paper must also be fixed with glue, and all excess must be cut off.

Then you need to cut orange corrugated paper into strips, and smearing it with glue, you will need to wrap the top of the created blanks. In this way, stamens will be obtained.

After that, a piece corrugated paper white color you need to fold it like an accordion and cut out a chamomile petal according to the template.

Then it is necessary to unfold the workpiece and grease one of the ends with glue and start wrapping around the created stamen.

After that, it is necessary to fix the created flower with another strip of green paper.

Then you need to very carefully bend the petals of the flower with your fingers and a pencil and straighten them. Everything, the chamomile is completely ready!

Second phase. Making a paper poppy.

The poppy stamen will have a slightly different shape. To do this, cut off a strip of pink paper. This strip it is necessary to cut into strips, a little without cutting to the end.

Then you need to grease the strip with glue and wrap it around one of the ends of the wire.

From orange corrugated paper, you need to cut a rectangle with sides of 7 * 13 centimeters. Then you need to fold the strip with an accordion and cut out the petals according to the template.

Lubricate the bottom of the strip with glue and wrap around the stamen. After that, it is necessary to fix the flower on the stamen with paper strip Green colour. Then you need to spread the flower with your fingers and give it a characteristic shape.

Third stage. Making a paper bell.

The process of making a bell stamen is exactly the same as the process of making a poppy stamen. The only difference is that the strip must be taken smaller and light yellow.

Then around the stamen you need to wrap a strip of white paper measuring 5 * 5 centimeters. After that, the bottom of the strip must be smeared with glue and wrapped around the stamen. It is necessary to strengthen the stem and use the fingers to straighten the bell.

Fourth stage. Making leaves.

The process of making leaves is very simple and easy. Green templates cut out of paper will need to be glued to the wire blanks. Then the leaves need to be shaped by wrapping them with a pencil and by spreading them with your fingers.

Fifth stage. The process of processing flower blanks.

The next step is to melt the wax. Then you need to very carefully, using a brush, cover all the prepared leaves and flowers with a thin layer.

Sixth stage. The process of assembling a wreath.

Then you need to take a long piece of wire and wrap it around your head, and then give it the typical shape of a wreath. After that, the wire must be wrapped with strips of green corrugated paper and secured with glue. Then you need to gradually weave flowers and blanks into a wreath and fix them with green paper, as well as glue.

After that, at the ends of the wire, you need to form a loop and a hook in order to later make it convenient to fasten the wreath. If desired, the place of the fastener can be decorated with a satin ribbon.

Everything, the wreath is completely ready.

Which is celebrated on December 25th. The classic wreath has a round shape of spruce branches with four candles. A traditional Christmas wreath with candles is placed horizontally - for example, placed on a table. However, a wreath without candles can be hung on a wall or on a door. On the wall, he decorates the house and reminds the whole family of upcoming joyful events, and on the door, he tells those who come about the cordiality and hospitality of the owners and their readiness to undress the holiday with the guest.
However, today a Christmas composition is not only an attribute of a religious holiday, but also an element of New Year's interior decor. It is made not only from coniferous branches, but from a variety of materials.The flight of fancy is not limited here!Its production is a very personal, unhurried and creative process. This is what they do for loved ones with love, putting their whole soul into it. And they decorate not only their home, but also use them as Christmas gifts.
And since the Russian Orthodox Church celebrates Christmas on January 7, we still have time to prepare gifts for this bright holiday with your own hands. Moreover, it is also great way keep your kids busy for a while and entertain on a snowy cold day

I have already devoted several posts to the topic "How to make a Christmas wreath with your own hands." For example,

And in a previous article, I started a story about . And since interesting ideas There were so many that I decided to continue this thread a little more.

1. A wreath of colored paper.

Prepare your flower stencils. Let you have several types of blanks, different in size.

Let's start with the first flower.

Bend the petals a little in the middle.

Glue one flower on top of another to get a three-dimensional copy.

Glue another one on top, but smaller.

The core can be made from a button, but the choice is entirely up to you.

For a wreath, you can prepare several types of flowers. Here is another example. Each layer in bulk flower may be of different shades. But I recommend that you stop at the red-gold scale.

Here are some flowers you can make.

Let's move on to the leaves. Traditionally, they are best made from green or gold paper.

With a sharp (but not cutting !!!) object on the wrong side, draw a wave-like movement along the center of the sheet.

Then bend out.

Here's what should happen.

Prepare the base for the wreath. The usual circle, to him

Glue flowers, voids around the edges can be sealed with leaves.

Do not forget that you can attach a ribbon to the base circle in advance if you want to hang it.

2. Scrap paper wreath

For the wreath we need:

newspaper sheets;
glue;
scissors;
brushes;
acrylic White paint(optionally just white, but this is worse);
New Year's paper for scrap, or any suitable color;
pictures (if they are not in the scrap paper) to decorate the wreath;
all the decorations that come to your mind.

1. We take newspaper sheets and fold the tubes out of them, as shown in the photo. We make so many tubes that, by folding them side by side, we get the thickness of the wreath we need.

2. Be sure to glue the tip of the newspaper to the main tube. The tubes should be tight enough, but not too rigid, so that they can be bent.

3. We find a round object. The length of its circumference should allow us to wrap tubes made from newspapers around it.

4. Logical conclusion: we wrap the tubes around - in layers.

5. You should get a blank for a wreath - its basis. We coat the base with glue and let it dry. All the tubes should stick together and only then you can pull out what we wrapped them around. We cover the base with white acrylic paint.

6. We choose decorations - sticks, die cuts, parts cut out of scrap paper, stickers, glitter, beads - everything that fantasy and possibilities allow.

7. Attach all the paper parts in advance to the places where they will be, adjust them if necessary so that everything is in its place. It will be difficult to paste over and redo - you can ruin the decorations.

8. It is better to glue it with a hot gun, but in the absence of it, the "moment" glue, I think, will do.

9. From double-sided paper you can (with the help of scissors) make very beautiful curls from ribbons, like on bouquets of flowers and decorate a wreath with them.

10. You can complete the decoration with glitter or shiny contours, add photos to the wreath - then the gift will become more personal.

3. Video hint - a wreath of old newspapers

4. Newspaper Christmas Wreath

A very original Christmas wreath made from sheets of an old book or magazine.

M materials:

unnecessary book (preferably old)
small twigs
pieces of yarn
some New Year's symbol made of chipboard, foam or plastic or cardboard
a base ring of styrofoam or straw (if straw is used, a piece of cloth is needed to wrap around the wreath)
glue gun
decorations (here - stickers of the Virgin Mary, a picture of a bird)
glare
satin ribbon and gold thread
Paper, brown ink
bronze and gold spray

STEP 1 - With a sponge, paint all the outer edges of the book pages brown.

STEP 2 - Roll all pages into a cone shape: from one corner, the connection points are adhered with glue.

STEP 3 - If using a straw wreath, wrap it in light stripes fabric, the fabric must be resistant to hot glue.

STEP 4 - Using a hot glue gun, attach the cones to the base wreath in three layers.

STEP 5 - Spray the cones with metal spray and let dry.
STEP 6 - Tie (wrap) red yarn (or yarn of your desired color) to the chosen New Year symbol and secure it with hot glue.
STEP 7 - Knit in a row of knots from the pieces of yarn to create berries. Attach the berries to the branches with hot glue.

STEP 8 Place all decoration elements to achieve the desired look (icons, twigs, bird)

And fix with glue

STEP 9 - Pass the tape through the cones on the front layer (alternating above and below the cone) around the entire circumference of the wreath. Repeat with gold thread.

STEP 10 - Find one blank page in the book, remove it and write congratulations on it. Apply metal spray and let dry. Then fix it under the New Year's symbol

5. Christmas wreath made of colored paper and cardboard

Making a wreath out of wrapping paper.

evesnewyear.com

And in conclusion to the topic of “paper” Christmas wreaths, I would like to show a couple of ideas for cardboard wreaths.

6. Christmas wreath made of cardboard cylinders.

Lovely Christmas wreath

From cardboard cylinders left over from toilet paper and kitchen towels.

Cut the cylinders into small rings, give them an elongated leaf-like shape, fold them in the shape of a wreath and glue them together!

As you can see, it's very simple. And a very nice result. In this version, the resulting wreath was not painted, leaving it a “cardboard” color, but you can paint it - or the entire wreath in silver or golden color, or leaves in different colors - for example, traditionally in green, red, gold, or more modern - silver, purple, hot pink.

After the Christmas wreath is formed and glued from the leaves, attach bows to it, Christmas balls and a couple of satin ribbons.

Can attach others Christmas decorations, twist the leaves with a serpentine different colors(then it is best to paint the leaves green), stick figures of angels, Santa Claus on it, Christmas reindeer- in general, give scope to the imagination.

And as a result of very simple manipulations, such a wonderful Christmas wreath appears, made literally from nothing, very original and pretty.

If there are a lot of cardboard cylinders from under the toilet paper, then at the same time you can make decorations for gift boxes from them.

Please note that here unpainted cardboard is combined with matting and braid - gifts are decorated and packaged in such an old rustic style. That is, this is a well-thought-out move - not to paint the cardboard.

And, of course, a small hand-made card on a gift looks very cute - take note.

ticka.ru

7.And another idea for a wreath of cardboard cylinders:

We cut cardboard cylinders into tubes of the same length, equal to the thickness of the wreath. We paint in the color we need (here it is painted with white spray paint, or you can leave some toilet paper on the cylinders).
We place them with holes down (put them “on the butt”) in the shape of a circle on a prepared horizontal surface (you can put a cardboard box under the bottom) In the center, for convenience, place a small coffee saucer to withstand the inner circumference, and expose the cylinders until the wreath acquires the desired form..
Then glue the sides of adjacent cylinders with PVA glue and let dry.
Attach the tape with which the wreath will be attached to the wall.

Decorate a wreath Christmas balls, which are also attached to PVA glue, or other New Year's decorations.

I think very original idea it is wise to use these cardboard cylinders, and not throw them immediately in the trash :o)

Today wreaths with flowers are again at the peak of popularity and adorn the hair of children and adult girls. A beautiful wreath will perfectly complement the summer look, emphasize the natural naturalness and beauty. Since fresh flowers have the ability to fade quickly, modern needlewomen have learned to use artificial flowers made from different materials. In this article, you will learn how to make a beautiful crepe paper flower wreath.

Materials:
- corrugated paper of different colors;
- scissors;
- glue;
- wire.

Master class headband with corrugated paper flowers

Take the wire and start wrapping it with corrugated paper Green colour to make stems for future flowers.

Glue must be applied to the strips of paper so that they do not unwind.

After that, take a square of green corrugated paper, make cuts on one side. This will be the sepal. From yellow or orange paper, you need to cut a strip and wrap it around the stem.
Now you can start making a flower with your own hands.

To do this, you need a small rectangle of paper, which must be folded with an accordion. On one side, you need to cut the paper in a semicircle, and on the other, in triangles. Unfold the accordion and start winding the blank for the petals. Do not forget to grease the bottom with a little glue. Carefully unfold the petals and twist them lightly on a pencil. One flower is ready.

Using a similar method, cut a flower out of paper, but in a different color and shape. You can also change the shape of the stamens. Even bells will look original in a wreath, which will turn out from a regular rectangle glued on one side. The leaves can be made sharp and elongated.

Flowers can also be made from blanks that are easy to glue glue gun. Give the petals different shapes and straighten them to make them look like real ones. Collect ready-made flowers from small bunches.
After that, make a frame for a wreath out of wire, glue it over with corrugated paper too.

Then fasten the flowers in any order and the rim is ready!

A wreath of flowers will be the perfect complement to the outfit, it will be combined with a light summer dress and natural make-up.

Although floral headbands are considered primarily a summer or spring accessory, modern fashionistas beautifully combine them even with autumn-winter things.

A wreath will favorably emphasize your image at a noisy party or a masquerade. It will be a great addition to the hairstyle and costume. But finished products are expensive ... The site "ZnayKak.ru" knows how to save money on hair ornaments- make it with your own hands, using colored parchment instead of fabric.

You will need the following materials and tools:

corrugated paper of different shades;
chenille (fluffy) wire;
narrow satin ribbon;
base for the hoop;
watercolor paints and brush;
scissors and glue.

Advice. For flowers, it is best to use colored parchment, as it is thin and pliable to work with. If not, then take plain corrugated paper.

Instructions for creating a rim:

Step 1. Cut paper into squares. The volume of the bud will depend on their size. For one flower, you will need 6 paper blanks.

Step 2 Put the squares together. Carefully roll an accordion out of them. First, fold one strip of paper, then turn the blanks over, and fold the parchment again. In this way, fold the base along the entire length.

Step 3 Now you need to make a stem for the flower. Fold the strip in half, so you designate central part on the workpiece. wrap around it chenille wire while pulling it tight on the paper. Cut the edges on the workpiece in the shape of a semicircle with scissors.

Step 4 With one hand, hold the future bud by the stem, with the other, begin to gradually wrap the paper towards the middle. With your hands, spread the petals into the desired shape.

Step 5 On light parchment, paint the edges of the flower watercolor paints. Then let them dry well before using them again.

Prepare flowers this way different sizes and hue.

Step 6 To secure the buds to the headband, place the base of the bud against the mold and wrap the wire tightly around it.

Install all prepared flowers on the workpiece. Alternate colors and sizes of buds to create volume.

Step 7 cut into satin ribbon into long strips, be sure to burn the edges. Apply glue on one side and fix on the rim.

This is the kind of decoration you should get from plain paper and ribbon.

There is such a tradition - to decorate the house for Christmas with Christmas fir wreaths with candles. Although the tradition is not entirely Russian, it is very beautiful, so we will support and make such a paper wreath with our own hands. Decorate it with confetti, ribbons and a paper candle.

Master class on how to make a paper wreath

To make a craft, we need: paper disposable plate, colored paper light and dark green, red, white, yellow, scissors, glue.

Let's start by cutting out and removing the bottom of the plate, we only need the edges. We cut the paper of two shades of green into strips of 1 cm thick. Then glue the strips on the plate, connect the edges.

We glue around the entire perimeter, alternating light and dark stripes. Then we cut the ends.

Let's make a candle. Cut out 2 strips of white paper. We lay on each other perpendicularly, glue the ends. We first bend one tape to another, then the second to the first, and so alternate until we get a candle of the desired length. glue the ends.