home » diaries » Do-it-yourself topiary for beginners: simple and unusual crafts. Do-it-yourself topiary from plastic bottles Topiary from a bottle with flowers

Do-it-yourself topiary for beginners: simple and unusual crafts. Do-it-yourself topiary from plastic bottles Topiary from a bottle with flowers

If you have plastic bottles, do not rush to throw them away! Such bottles can make a very unusual, spectacular tree ... Such a craft will become an unusual and pretty decoration for the interior of a house or cottage!

IN this master class the process of creating a tree from a plastic bottle is described in detail.

To make wood from plastic bottles with your own hands you will need such materials and tools:

- plastic bottle 1l.;
- acrylic paints;
- wire (thin and larger);
- napkins;
- a candle or a lighter;
- scissors;
- tweezers;
- brush;
- PVA glue;
- flowerpot or decorative vase;
- decorative small stones;
- you can have several elements for decorating crafts.

The manufacturing process begins with the creation of a strong frame of a tree trunk from large wire.

After, the container for planting a tree is filled with small pebbles. And the resulting frame is fixed in it.

The plastic bottle must be covered with green acrylic paint, on several layers and only on one side. You can experiment with the color of the leaves, it can be an autumn tree in yellow and orange tones.

The resulting strips are cut into small pieces of arbitrary shape.

Using tweezers, the future leaves of the tree are held over the candles. As a result, they are slightly deformed.

They should be heated carefully, and from the non-dyed side!

After that, in each leaflet, with the help of a heated needle or pin, small holes are made for the wire.

Then the wire frame of the tree is processed with napkins.

They must be cut into small strips, apply glue to them and carefully wrap the entire frame of the tree trunk.

After the entire frame is covered with napkins, it must be left to dry completely.

And at this time, with the help of a thin wire, the crown of the tree is created. The resulting leaves are strung on the wire.

After, twisting the wire, the leaves are fixed.

The result is small branches covered with leaves.

After the frame is completely dry, it is stained with brown acrylic paint.

When the layers dry properly, the trunk is processed with several shades of brown.

Later, branches with leaves are attached to the trunk. The wire is wrapped around the barrel and fixed.

The result will be some pretty fluffy branches. They are located mainly at the tip of the trunk and the main branches.

If the tree is made to decorate the garden, then it is better to “fix” the entire painting with facade varnish!

And finally, the final stage, decorating crafts with decorative elements.

And so, the craft is ready!

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

Now you can safely decorate the interior or even the garden with this craft! The process is quite exciting and takes a little time. In addition, a tree like a frog made from plastic bottles can be a wonderful handmade gift for friends and neighbors!

There are different. They have long become an integral decor of many interiors. From plastic bottles We have done spring flowering bush. The craft turned out colorful, bright and unusually beautiful. Such a composition will surely appeal to the hostesses of those apartments where it is very problematic to grow fresh flowers. For example, there is not enough light or the working rhythm makes it difficult to take care of plants in a timely manner.

For work you will need:

colorful plastic bottles,
flame of a candle or gas burner,
Super glue,
scissors.

We start the craft by cutting a brown bottle into rings about 1-1.2 cm wide, and then gluing a strong and weightless ball out of them. This is the basis for the branches of the spring bush.

Now let's take a look at the young leaves. The light green color of the bottle resembles spring greenery. We cut the plastic into squares or rhombuses with sides of 3.5 - 4 cm, with the help of scissors we decorate the edges of geometric shapes with a fringe. At the end of the work, we will melt the thinnest strips of fringe over the flame of a gas burner. In order not to burn your hands, you can use pliers. Glue the finished leaves to the brown branches. The work is painstaking, you need to be patient.

For the barrel, we took the top of the bottle with a narrow and long neck. We will use the bottom part for the stand. We traditionally framed the plastic bowl with a curly fringe.

After gluing the trunk and completely drying it, we continue to work with the leaves (lightly cover the junction of the parts).

It's time for the flowers. We have a blue plastic bottle. The color in the photo is not quite right. In reality, plastic looks much richer and more interesting.

First, we cut the bottle into squares. Then with scissors we make deep cuts in the squares (in the center of each side). And finally, thickly cut the edges of each of the four resulting parts. We complete the work by processing the edges of the squares with a candle flame. We collect a blossoming flower into a bud.

We glue a blue miracle in the middle of each green leaf, we get a flowering bush.

Now we grease the neck of the bottle with superglue and put it in the center of the bowl. We are waiting for the parts to be firmly fastened together.

With the melted remains of the brown bottle, fill the bowl to the top. To create such small pebbles, we process each piece of plastic (about 1x1.5 cm in size) over the fire. Now they have no sharp corners, and the volume has increased. It is better not to use a different color for pebbles so that the individual elements of the craft do not merge together, do not become one green mass.

Like the product and want to order the same from the author? Write to us.

More interesting:

What is topiary made of?

So, if you decide to make a topiary with your own hands, then you should know that the tree consists of several elements:

the basis
trunk
crown
pot or stand

Moreover, for each of these elements there are different forms and materials.

Topiary base

The base can be of different shapes. Most often, a ball is used in the manufacture of topiary.

Topiary in the form of a ball

But there are topiaries in the form of a heart, as well as in the form of various figures. Experienced needlewomen create blanks in the form of numbers (if the tree is intended as a gift for a birthday or memorable date), as well as in the form of letters.

Topiary - heart

As a basis for a ball or heart, you can use a foam blank, mounting foam Or a papier-mâché ball. Curly bases are thick wire, foam or cardboard.

Topiary base - foam ball

Topiary trunk

The barrel can be a thick wire wrapped in twine, floral tape or plastered with plastic.

You can also use an ordinary wooden branch (for reliability, it is better to clean it from the bark and cover it with stain and varnish).

A short, straight trunk is obtained from several sushi sticks or wooden skewers connected together.

Topiary crown

Topiary crown is a huge scope for imagination. You can use absolutely everything: paper ( paper napkins, cut out flowers, crepe paper, quilling paper or folded origami - kusudama), cold porcelain flowers, or polymer clay, satin and nylon tapes, felt or cotton, buttons and beads, coffee, shells, dried leaves and other natural materials, and much, much more.

Topiary in the Kanzashi technique from the remnants of fabric (author - Tatyana Babikova)

Topiary made of corrugated paper and natural materials

Corrugated paper and organza topiary (author - Tatyana Kovaleva)

Topiary from natural materials (leaves, apples, acorns)

Topiary of flowers (origami - kusudama)

Topiary stand

Depending on the idea and size of the tree, an ordinary flower pot, an iron bucket (painted or decorated using decoupage technique), a beautiful flat stone or shell. You can decorate the stand with fabric or lace. Or maybe it will be a nice cup? You decide.

Shell topiary stand

Topiary stand decorated with fabric and cinnamon sticks

Topiary stands (from left to right): flower pot, crochet jar, fabric-covered bowl

Stand for topiary from a ceramic mug

Preparation of the necessary materials

Before you start working on a topiary, carefully consider the idea and all the materials used. The idea will depend on the purpose of the tree and the hobbies of its future owner. Gather materials. Attach the elements of the crown to the workpiece. Decide what decorative items you will take.

Beads of different sizes and decorative dragonflies were used as decor for the topiary.

Beads, braid, sisal and a decorative watering can were used as decor for the topiary.

Making a trunk

The next step is to prepare the trunk. As already mentioned, depending on the material, it must be wrapped with twine or varnished.

We attach the base of the tree to one end of the trunk. The ball can be simply inserted, and it is better to fix some curly base with glue.

The other end of the barrel is inserted into the prepared vessel. Usually it is attached with foam, which is then poured with alabaster or cement.

The trunk of the topiary is glued to the foam

At first, it will be difficult to guess the consistency: if the solution is too liquid, then it will dry for a very long time. And if you make it thick, then it will not fill all the empty space between the pot and the foam.

Experienced needlewomen are advised to achieve the consistency of store-bought sour cream: not very liquid, but slipping off a spoon and easily changing shape.

Pour the solution into the prepared form, smooth the top and leave to dry completely.

We decorate the crown

While the base dries, you can make crown elements: leaves, flowers.

Let me remind you once again that they must be fixed after the base has completely dried.

Depending on the base material, the flowers can be attached with hot glue or stuck in with small skewers or wire.

You can easily update the interior of the room, bring notes of dreaminess and tenderness into it - by making a do-it-yourself topiary for beginners from natural or decorative materials. You will have to work a little on the tree of happiness, but the result is definitely worth it. The craft will perfectly decorate any room, will become a good gift for a holiday for a friend or relative. For newlyweds, you can make a Bird's Nest topiary - a real tree of happiness, symbolizing a cozy family nest. It is not necessary to act on a grand scale and make a large topiary - small topiaries look no less decorative, and will fit on any shelf or desktop.

You can easily update the interior of the room, add notes of dreaminess and tenderness to it - by making a do-it-yourself topiary

Initially, figuratively trimmed trees and green shrubs in the yards of wealthy people were called topiaries. Over time, this art has changed. Now everyone can decorate their home with such cute decor. The size of a tree often does not exceed half a meter, and the variety of its shapes, colors and materials used to make it is almost limitless - at home they are made step by step from fabric and banknotes, coins and coffee beans, autumn leaves and dried flowers, even sweets and chocolates - everything do not list. See examples of topiary in the gallery below.

To create this craft, modern needlewomen use almost everything.

Here is just a small list of the most popular items for decoration:

Artificial flowers from foamiram, satin and rapeseed ribbons, salt dough, plastic, napkins, organza and so on.
Decorative berries, twigs, leaves.
Large and small beads, beads, buttons.
Coins of various denominations.
Souvenir paper money.
Old gears, bolts, scissors and other small tools.
Thread pom-poms.
Balls for decorating Christmas trees.
Paper squares and more.

Synthetic little things, of course, allow you to make topiaries of delightful beauty that do not lose their color for a long time. appearance, retaining its attractiveness for many years. But no less interesting are products made from natural, natural materials, such as:

Cones, chestnuts, nuts, pistachio shells, acorns.
Sea pebbles, shells, sand.
Dried slices of citrus fruits, roses made from their peels.
Rowan berries, physalis inflorescences, yellow leaves of any trees.
Coffee beans, cinnamon sticks, star anise, cloves and other herbs.

The choice remains only with the needlewoman and her imagination. In each craft, no matter what it is made of, there is a special sincerity and warmth that fills the interior with harmony.

Gallery: do-it-yourself topiary (25 photos)

Classic tree of happiness: master class (video)

How to make the easiest do-it-yourself bead topiary: instructions

Of the many options, the wish tree made of beads or imitation pearls is undoubtedly the easiest to execute. Consider detailed wizard class to create it.

It turns out very nice

What you need to have:

Foam base ball.
A bunch of beads, pearls of one or more colors. In needlework stores, you can buy several low beads at once, so as not to glue them one by one.
Two pieces of strong steel wire of the desired length, to which the depth of the pot and half the diameter of the ball are added, since the stem of the tree will enter the base by half, and into the pot - to the very bottom.
Satin ribbons, preferably thin, matching the main colors.
Satin roses, a little felt to decorate the bottom of the pot.
Corrugated paper, organza, satin or rapeseed ribbon of medium thickness.
Quick dry glue or glue gun.
Stones for filling the pot, gypsum for pouring.
Paint and pebbles for decorating the ground.
Plastic pot.

Let's start making the simplest wish tree

We start by making holes in the ball for attaching steel wires, trying them on. We wrap the flight wire so that at the top it is close to the ball, and at the bottom - 5 cm below the expected ground height. Put aside.
Then we take a low bead and carefully, starting from the very top exactly above the holes for the trunk, fasten the first bead. Then we apply transparent glue in stages and immediately fix the beads without removing them from the thread. When only a couple of three turns remain before the holes, we insert the wires for the barrel, preliminarily lubricating them with plenty of glue, and finish the winding, tightly closing the entire ball.
Let's start working on the pot. We wrap it corrugated paper, cover with organza on top and grab with a ribbon. We glue the joints. At the bottom we glue a circle of felt.
Now planting a tree. First, put the stem in the pot. We fall asleep pebbles and immediately fill it with prepared gypsum. Please note that gypsum expands when it dries, so do not fill it to the very top, leave some space. It will dry out within a few minutes.
It remains only to decorate at your own discretion the ball itself, its bottom and the surface of the gypsum in the pot. It's so simple, beauty is created with your own hands.

Options may vary

Tip for a beginner: when making, it is most convenient to use a heat gun. The glue in it is always transparent, dries very quickly and holds securely.

Topiary from natural materials: a step-by-step master class

Beginning needlewomen can also easily cope with working on a tree made of cones, acorns, chestnuts, walnuts or hazelnuts. This great idea for classes with a child, allowing you to teach the baby to see the beauty even in the most ordinary and simple things. In addition, many children love to collect such things while walking on the street. For the stem, you can even take an ordinary twig, which will give even more naturalness, environmental friendliness.

Beginning needlewomen can also easily cope with working on a tree of cones, acorns, chestnuts, walnuts or hazelnuts.

What you need:

Styrofoam ball for the base.
Cones, chestnuts or other nuts.
Wire or strong twig for the trunk.
A container in which we will plant a tree.
Stones and plaster.
Glue gun or dragon type glue.
Acrylic colorless varnish, available in hardware stores.
Decorations on request.

How to make a topiary from cones

As in the previous MK, first of all we pierce a hole under the barrel, try it on and decorate it. If you took a simple branch, then you can leave it unchanged.

We take the base and glue the selected nuts or cones on it, tightly attaching them next to each other.
Shortly before the end of the work, we insert the barrel into the hole and finish the ball. If you cover pine cones with artificial snow, then a wonderful New Year's option will come out.
Chestnuts and acorns complement perfectly autumn leaves. And walnuts and hazelnuts look better if they are combined together and decorated with bright rowan berries.
The last step is planting a tree in a prepared container, for example, a brown flower pot would be very appropriate here.

Newbie Tip: Finished walnut craft should be coated for durability acrylic varnish or paint. Best suited gold and silver colors.

Memories of the sea or what to do with shells brought from vacation

A craft made of shells and burlap with elements of twine looks very aesthetically pleasing. She will embody the dreams of a new trip to the endless sea. Reminds me of a good time. And the collected gifts of the deep sea will not lie idle.

For marine topiary you need:

Foam base: balloon or heart.
Porcelain white or transparent cup, vase, glass.
Steel wire.
Thermal gun.
Shells, sea pebbles.
Pearls are artificial.
Burlap, twine.
Gypsum or pebbles to fill the container.

A craft made of shells and burlap with twine elements looks very aesthetically pleasing.

Detailed instructions for creating a simple and straightforward:

We determine the center of the base and make the usual hole for the trunk. We try on the wire, decorate it with twine, put it aside for a while.
We carefully and accurately glue the foam base with shells, pebbles and pearls in random order. We make flowers, simple or lush bows from twine. We cling them between the main details. We insert the finished trunk into place and draw up the bottom of the base.
We place the craft in a cup or a vase, fill it with plaster. We sprinkle the gypsum that has not yet hardened with sea or decorative sand. We decorate the container with several turns of twine. Another option is to wrap it completely with burlap and fasten it satin ribbon pastel, light colors.
If there is no desire to use gypsum, and the topiary itself is small in size and weight, it is preferable to plant it in a transparent glass or cup, filling it with the remaining pebbles and shells. Thus, a delicate decorative element is obtained, which at any time will remind you of summer holiday, charged with positive and energy.

Topiary is a hearth decoration loved by many needlewomen. A decorative tree is made out of coffee beans, napkins, fabrics and other materials. I will show an example of creating a topiary from plastic bottles and pine cones.

For Cooking:
- glue for plastic
- the actual bottles (mandatory green and brown)
- small cones (up to 10 pieces)
- a candle (gas burner).

First we need to make a circle - a trunk to which green branches will be glued. From a transparent white bottle, cut out several rings of the same width and, using glue, make a circle out of them.

Now we will cut out stars, rhombuses and flowers of different configurations and sizes from green plastic. We cut the edges of the blanks into narrow strips (1 mm), and then carefully melt them over the fire. The strips will acquire the effect of crystal. We just have to bend the individual leaves at the base up, that is, collect the blossoming flower into a bud.

If necessary, we break off the tails of pine cones, otherwise it will be problematic to attach them to smooth plastic. By the way, to facilitate the process of gluing parts, you can use pieces of foam rubber. First, we glue the porous material to the base of the cone, and then the cone to the trunk of the topiary.
Here is our wealth - the result of painstaking half-hour employment. The colors harmonize very well with each other.

Let's start at the top of the tree. It will be decorated with the biggest cone. Further in a circle we start a row of emerald greens, and next to it we begin to dilute the leaves with brown cones.

After pasting half of the circle, work is suspended. Set the piece aside and let it dry. At the same time, we take up the design of the lower part of the trunk.

We took a green neck and a rectangle (10x5 cm) cut off from the middle part of the bottle. They rolled the rectangle into a tube and put it in the neck. The tube from below was cut into centimeter strips. The inside of the barrel was treated with glue. In order not to hold the plastic with our fingers (for the period of gluing), we simply tied it with a strong thread.