Creating a holiday atmosphere is facilitated by decorating the room with various New Year's crafts from simple and affordable materials. Christmas tree from corrugated paper do-it-yourself - a great activity for children, as well as an original new year gift. Today, with the help of our master classes, we will learn how to make Christmas tree crafts from corrugated paper. It is better to create with the whole family. So let's get started!

Corrugated paper Christmas tree: a master class with a photo

Let's do Christmas tree"traditional" Green colour. To start, let's prepare necessary materials and tools.

Necessary materials:

• green paper
• cardboard sheet - A4 format
• beads, rhinestones and tulle
• needle with thin line
• PVA glue
• scissors
• scotch
• pencil

Step-by-step instruction

How else can you make needles? Corrugated paper is tightly wound around a pencil, which is then removed. At one end of such a "roll" we glue the "twig" to the cone. It turns out a very fluffy Christmas tree.

To complete the composition, you can decorate the Christmas tree with beads, stars, paper snowflakes, pieces of tulle and bows. At the same time, it is important to adhere to the measure - after all, our green tree is already beautiful in itself.

How to make a Christmas tree from corrugated paper: a master class with a photo

Options for creating paper New Year's crafts there are many. At this point, fantasy will tell you - just choose! Let's make a pale lilac Christmas tree, and use beads and sequins as decorations.

In the photo - a finished Christmas tree made of corrugated paper:

We stock up on materials and tools:

• corrugated paper
• cardboard
• scissors
• thread with a needle
• thermal gun
• decorative elements - beads and sequins

Step by step guide to action

Corrugated paper Christmas tree: a master class with a photo

A fluffy volumetric Christmas tree made of corrugated paper is obtained using a completely simple technology. This tree is perfect for decorating your home or workplace in the office. And if you add a bright scarlet bow and gold or silver strings of beads to the composition, then a real exclusive jewelry will come out.

Consumables and necessary tools:

• cardboard - A4 format
• green corrugated paper
• scissors
• pencil
• beads and bow

Step-by-step instruction:

In the photo - different options for wonderful paper Christmas trees:

Do-it-yourself Christmas tree craft made of corrugated paper, video

Unusual handmade jewelry always attracts attention. Here you can dream up from the heart - the Christmas tree can be of any color and design. This video shows in detail the process of creating a Christmas tree from corrugated paper. Good luck with your crafts!

New Year- a special holiday that gives vivid impressions and positive emotions. To make this New Year memorable for many years, you should prepare well. In this article we will look at: how to make New Year's crafts from corrugated paper with your own hands.

Candy and crepe paper snowman

You will need: white, golden and red corrugated paper, chocolate lollipop with a surprise and a round candy, wire, glue, synthetic winterizer, red braid, beads, scissors, ruler.
Master Class
Make from crepe paper white color blank size 15x17 cm.
Wrap the chocolate Chupa Chups into the bottom of the workpiece and fix with glue.
Insert a round candy into the top of the blank, squeeze at the top and fix with glue.

Wrap the braid around the snowman's neck as a scarf.
Cut off the excess paper from the bottom and mask it by gluing a circle of white corrugation.
Glue a cone out of golden paper, roll up a ball and a padding polyester edging, then collect a hat.
Prepare a piece of wire 30 cm long, fold it in half and wrap it with a strip of white corrugation.
Cut out 4 mittens from golden corrugated paper, then glue them in pairs to the ends of the wire and decorate with padding polyester.

Glue the handles on the back of the snowman under the scarf.
Make a nose and mouth for the snowman, then glue them on.
Glue beads for eyes and buttons.
A snowman made of sweets and corrugated paper is ready!

original cone

You will need: corrugated paper in dark brown and light brown, foam egg 17 cm high, scissors, ruler, simple pencil, toothpicks, sweets, foam plastic, glue.
Master Class
Cover the styrofoam egg with dark brown paper.
Prepare pieces of corrugated paper of two colors measuring 5x2.5cm.


Glue the squares of two colors, then cut out the scales (in the shape of a petal).
Glue the scales to the toothpicks, then give a curved shape.
Make 70 blanks in this way.

Glue the candy to the toothpicks.
Insert scaled toothpicks filling the top of the candy-free styrofoam egg.
Lay out the rows of scales along with the sweets, guided by the photo scheme. Place each next row in a checkerboard pattern.


Make scales without toothpicks, as indicated in paragraphs 2 and 3.
Glue the bottom of the egg with scales without toothpicks.
Crumble the styrofoam and stick it on the bottom scales as snow.
The original corrugated paper cone is ready!

Corrugated paper Christmas tree

You will need: green crepe paper fluffy wire yellow color, scissors, skewer, double-sided tape, a simple pencil, thread, ruler, glue stick, a piece of foam, sequins.


Master Class
Prepare 7 tiers (corrugated paper rectangles) for a Christmas tree of this size: 40:20 cm; 35:18 cm; 30:16 cm; 25:14 cm; 20:12cm; 15:10 cm; 10:8 cm. It is worth noting that the strips must be cut off from the side of the wide part of the corrugated paper so that the tips of the tree do not curl.


Take the largest strip and fold it like an accordion.
Cut the edges of the accordion diagonally to make sharp corners.
Tie the accordion in the middle with a thread.
Glue the sides of the accordion with double-sided tape to make a skirt.

Repeat steps 2-5 with the rest of the blanks.
Fold in a zigzag soft wire to form 5 vertices.
Connect the lower parts to make an asterisk.
Attach the star to the blunt end of the skewer with double-sided tape.


Slide all the layers of the Christmas tree through the sharp tip of a skewer, then secure in the Styrofoam.
Glue the patches.
Corrugated paper Christmas tree is ready!

Garland for a photo shoot

You will need: corrugated paper rolls different colors, scissors, adhesive tape or fishing line.
Master Class
Cut the crepe paper roll in half.
Stretch the roll with a second person to straighten the paper.


Fold the paper several times.
Cut the fringe on one side, then on the other. It is worth noting that the middle should remain intact.
Also be careful not to cut the paper along the fold.

Prepare all paper in the same way.
Attach the garlands to the ceiling with adhesive tape, or hang them on a fishing line.
A festive garland for a photo shoot is ready!

Christmas ball

You will need: corrugated paper blue color, foam ball, blue satin ribbon, blue threads, glue gun, tweezers, beads, ruler, scissors.
Master Class
Cut the paper into small strips measuring 1x3 cm. Attach the ribbon to the ball.


Twist the rosette as shown in the image, then secure with a thread. Make the desired number of roses in the same way.
Glue the roses on the ball, placing them close to each other. Glue the beads.
Corrugated paper Christmas ball is ready!

Corrugated paper snowflake

You will need: cardboard, corrugated paper, wooden skewer or pencil, scissors, glue.
Master Class
Cut out a regular hexagonal snowflake from cardboard.
Cut crepe paper into squares.
Twist the squares using a skewer. Glue the snowflake over, placing the blanks tightly to each other.
Fluffy snowflake is ready!

:). Master Class Evgenia Kaidalova.

Christmas tree made of corrugated paper "Green beauty"

Tools:
Scissors,
A glass of yogurt
Thermal gun,
glue sticks,
stapler.

Materials:
Corrugated (crepe) paper green,
Copper wire 2.5 mm long 12-15 cm,
Paper (whatman),
A branch of a tree about 19 cm long,
Substrate 5 mm thick,
stones,
Alabaster,
Textile,
Decorative composition(2 pcs),
green sisal,
Thin satin ribbon 3mm,
Christmas ball 2 cm in diameter,
red beads,
Pine cones,
Red beads with a diameter of 5 mm,
Artificial snow (spray),
Satin white ribbon 5 mm.

Progress:

1. Cut out a semicircle from whatman paper and roll a cone out of it. We fix the seam with a stapler.

2. We cut strips 3-4 cm wide from the substrate.

3. We coat the tree branch with glue and glue the first strip of the substrate to it.

4. We wrap the stick in this way until the width of the resulting circle is equal to the diameter of the cone.

5. Lubricate the cone on the reverse side with glue and insert the resulting circle from the substrate there. Most likely, he will not climb completely, as the rows will begin to shift. In this case, we put in as much as it turns out, and cut off the excess at the level of the cone.

6. Coat the tip of the cone with thick glue from the inside, insert the wire, and wait until the glue hardens.

7. Glue the resulting blank with corrugated paper to hide possible white spots on the future one.

8. We make roses from corrugated paper, it is difficult to specify the required quantity. Since it all depends on the size of the cone, but I took all 2.5 m of the package!

8.1. We cut strips about 6 cm wide, 25 cm long.

8.2. We make a bend on the strip in the upper right corner.

8.3. We make the second bend. We fix it thumb right hand, and with the left hand we turn the bend back, as if twisting the candy wrapper.

8.4. We continue to make similar bends-bends along the entire length of the cut. Don't be afraid to fold the paper a second time to form a fold. The quality of the bend depends on a good bend!!!

8.5. We twist the resulting strip quite tightly, cut off the extra tail, leaving about 5-7 mm of paper.

9. We glue the resulting roses onto the workpiece, starting from the trunk. If necessary, the size of the roses can be made different!

10. When the Christmas tree is almost all pasted over with roses, glue the tape and twist it around the wire pasted over with corrugated paper, fix it at the end and cut it 5 cm longer.

11. Since I did not have enough paper, I wrapped the tip of the Christmas tree with beads.

12. We bend the tip and glue the ball to the end of the satin ribbon.

13. We make a bow from the same satin ribbon, glue it to the ball.

14. We paste over the glass with a cloth.

15. We put the pebbles inside and fill it with a solution of alabaster.

16. We insert the Christmas tree into the unhardened solution, align it.

17. When the alabaster is almost frozen, insert a decorative rosette and close the solution with sisal, cut off the excess.

18. We sprinkle a few small cones with artificial snow, decorate free sisal with them, and glue a few beads for decoration.

19. We decorate the base of the Christmas tree with a white ribbon, make a bow, decorate with a bead.

20. Glue the second decorative rosette onto the cone of the Christmas tree.

21. Complement it satin ribbons and red beads.

New Year's toys made of corrugated paper will give each product its own special look. For some reason, this material is not very common for creating New Year's crafts, but in vain. Paper of this type pleases the eye with bright positive colors, it is inexpensive and, in the presence of understandable master classes, allows you to create excellent masterpieces with your own hands.

The important advantages of corrugated paper for creating Christmas decorations are noted above, but one and extremely important point- easy to make and beautiful appearance by the end.

DIY Christmas decorations from corrugated paper

Herringbone No. 1

Depending on whether you put the Christmas tree on the table or hang it on the Christmas tree itself, the size of the craft is different. But the main stages of work here are clear and simple, it doesn’t matter what the size of the Christmas tree will be in the end.

Important! Corrugated cardboard among professionals is also called crepe paper. This material differs in texture and thickness. The material has a characteristic waviness, due to which toys made of corrugated cardboard keep their shape well and can be used for New Year's decor for several years in a row.

IN this master class we offer to make a small Christmas tree with our own hands from the material in question, which will become an effective and stylish toy for a large New Year's tree.

What you need for work:
* Corrugated paper of any color.
* Paper disposable (not used) plates or just cardboard.
* Double sided tape.
* Glue (you can use a stapler instead of glue).
* Tinsel and other decorative elements for a mini Christmas tree.

Initially, the basis of the future Christmas tree is made - this is a cone. To make it, you need a clean paper plate or just a sheet of cardboard, connect the cone with tape (stapler). After that, make the bottom of the product even with scissors so that the tree can stand stably if necessary.

Next, you need to prepare fir branches, but they do not have to be green for this toy, choose a specific color at your discretion and remember that the New Year's time is magical and unusual, so the tree can be at least orange, at least some other. It will be necessary to roll several strips into thin tubes, cover them with a cone using glue or double-sided tape. Now the Christmas tree needs to be decorated using tinsel, sparkles or other decor.

Herringbone No. 2

In the manufacture of this toy, the initial composition of materials and tools is almost the same. But the method of attaching corrugated paper to the cone is different. However, first things first.

What you need for work:
* A sheet of cardboard from which to make the initial cone.
* Corrugated paper in herringbone color.
* Glue, needle and thread.
* Scissors, sequins and other decor.

Make a cone using the same technology that is described in this material. Corrugated paper needs to be twisted. To do this, stitch strips four centimeters wide along one edge with a thread and leave tips of ten centimeters on both sides. After that, pull off the paper by the threads so that it becomes an accordion.

Next, glue the wavy strip of paper in a cone in a circle, evenly applying glue. You can decorate the tree with sparkles, ribbons and beads, and be sure to attach a star to its top. You can also make a themed one for the New Year.

Snowflake

Will be beautiful and stylish Christmas decorations from corrugated paper in the shape of a snowflake. To work, in addition to the paper itself, you need scissors and glue, cardboard, and a pencil. Initially, the base is being prepared, for this, according to a pre-prepared and self-selected template, cut out a beautiful snowflake from cardboard.

Now make a lot of small squares from corrugated paper. Apply glue to the snowflake and glue the paper squares tightly, pressing them one to one. You need to glue in the center of each square, and at the same time try to bend the edges up as much as possible. Here are the options for crafts for the New Year.

Corrugated paper balls look incredibly elegant. For work, you will also need threads and scissors. First, cut out four squares from A4 paper, choose the size yourself, given that the diameter of the ball is ultimately equal to the length of the side of the square. Now lay the leaves in an even pile and fold the accordion. The ends of the accordion can be further trimmed, but you can not do this.

To get out of this pile christmas balls you need to tie the ball with a thread in the center and unfold the sheets of paper, giving the crafts the shape of a ball. The more sheets of corrugated paper are initially folded, the more magnificent the ball will turn out.

As you can see in the photo and video in this material, corrugated paper toys for the New Year and Christmas turn out to be exquisite, stylish and beautiful. You just need to show a little patience and accuracy, so that later you can enjoy amazing crafts.