home » Groups » Decoupage of a tea house: simple and spectacular decoration options (100 photos).

Decoupage of a tea house: simple and spectacular decoration options (100 photos).

Now every craftswoman knows about the decoupage technique. And it seems that nothing can surprise you in this technique. However, having studied detailed master class, you will learn about an unusual mixed decor technique. A variety of fittings will be added to the usual materials (rice maps, soil, structural paste). Shells, chains, beads, ribbons, laces and pendants - all this will mix into a single composition in a marine style. A little time and inspiration - and you will get a wonderful tea house. Looking at it, you can feel the salty breeze, the warm sun, hear the cries of seagulls and the sound of gentle surf. A small piece of the sea right at your home!

For work we need:

19. Set decorative ribbons with "Annette" pattern

23. Beads "Zlatka", art.: GR 41/11 (№0041)

1. Prime the outer sides of the workpiece “Mr. Carving”, art.: VD-264 with a thin layer of acrylic primer “Love2Art”, art.: APW-230 using Mr.Painter sponge, art.: SPB-20. dry it for an hour or speed up the process with a hair dryer.

2. Sand the primed surfaces with the “To-Do” emery sponge, art.: 90963. Remove the dust with the soft side of the sponge.

3. Tear out from the rice decoupage card "Love2Art", art.: KPR, motifs suitable in size for decorating the walls and roof of the tea house.

4. Glue the motifs on the side walls of the house. For reliable gluing, first we apply glue-lacquer for decoupage "Love2Art", art.: DVGP-110 on the surface of the workpiece and attach the motif. Then, moving with the Kinotti brush from the center to the edges, carefully glue it.

5. Glue two small motifs on the roof slopes. Let's dry the blanks.

6. On the front and back walls of the house, draw vertical stripes with gray and white acrylic paint "Love2Art", art.: ACP-60. Flat synthetic brush "Kinotti", art.: 50112-20 - the most convenient tool for this work.

7. Paint the steering wheel on the front wall of the house with white acrylic paint.

8. Mix two close tones together acrylic paint: gray and cold blue. With the resulting color, paint over the slopes on the roof.

9. With black paint, make a stroke along the edges of the bevels of the roof. To do this, we will draw on the corner of the beveled synthetic brush "Mr.Painter", art.: SBA, a little black paint "Love2Art", art.: ACP-60. First, draw a brush over a sheet of paper, achieving a smooth distribution of paint. Then, placing the brush from the outer corner, draw along the eaves straight line. You should get a smooth gradient. Dry the workpiece with a hairdryer.

10. Repeat the contour along the curly cuts using the white acrylic contour "Love2art". Let's dry the workpiece without using a hair dryer, since the contour from hot air may blur.

11. We repeat the same technique on the walls of the house, moving along the strips. So they will become more voluminous.

12. Using the Mr.Painter foam brush, art.: SPB-20, paint on the free space on the side walls. To do this, mix the gray-blue tones of acrylic paint directly on the workpiece. Let's dry the workpiece.

13. Using a glue gun "Micron", art.: DGL, glue the chipboard "compass" "Mr.Painter", art.: CHI-9 on the back wall of the tea house.

14. Outline the helm and compass with heavily diluted black acrylic paint.

15. A separate oval blank "Mr. Carving”, art.: VD-008 we will paint with gray and white acrylic paint. Just like on the bevels of the roof, outline its edges with black acrylic paint, achieving a smooth gradient.

16. Glue the house in the center of the oval panel. This will give you extra space for decoration. glue gun"Micron", art.: DGL will provide excellent coupling.

17. Plywood blanks “Mr. Carving”, art.: VD-320 in the form of bricks, we toned with diluted black acrylic paint.

18. Glue them at the bottom along the perimeter of the house, imitating masonry.

19. With the help of the white acrylic contour "Love2art" we will draw glare on the stones.

20. Cut off a piece of mesh tape 25-30 centimeters long. Paint it with white acrylic primer using a foam brush. Dry the tape with a hair dryer.

The desire to transform your home, creating a cozy space, arises in every hostess. The decoration for, as a rule, becomes the things necessary in the household: towels, potholders and various dishes. But what if we go a little further and make a completely unique handmade item?

Such an amazing creation may well be, which is not found in every kitchen. Unusual storage for tea bags invariably attracts the attention of guests and is admired for. Give the accessory an appropriate look will help decoupage technique. Let's consider the most interesting ideas with you together!

Decoupage technique

Decoupage is a French word meaning "cut". The technique is based on decorating various objects and consists in attaching a pattern to a surface. Usually, an ornament or a picture is cut out and applied to the object to be decorated, varnishing the pattern for durability.

Due to its simplicity, the technique is becoming more and more popular among those who are fond of needlework and love the hobby associated with creativity. as well as the smallest accessories. Decoration of kitchen utensils has long been used in different countries and every year wins more and more admirers.

In addition to the obvious advantage in the form of creating unique items, there are hidden possibilities of this decoration technique.

On a note! For example, decoupage is often used to restoring old furniture or smaller accessories.

Decoupage of a tea house is an opportunity to make an unusual and useful kitchen piece of furniture literally from nothing. as well as the ability to implement bright ideas, using available improvised means, to show design abilities, and just spend time doing an unusual activity with the help of decoupage.

This does not require special skills or high costs for materials, since even old magazines, ordinary napkins and other forgotten things can be used in the work!

Technique on different materials

If almost any element can be used as the details used to decorate the house, then what about the house itself? Does this require a special framework? As a rule, the working surface usually becomes tree, cardboard or .

Fact! It is the tree that is considered the most best material For decoupage.

Tree strong enough, perfectly combined with various paints and varnishes, durable and environmentally friendly. Therefore, in the kitchen for such a product there is always a place. Working with wood begins with surface treatment with sandpaper. After that, it can be primed and applied ornaments.

Cardboard, of course, can be called the most accessible material. If there is not a wooden house in every house, then no one will have any difficulties with cardboard. However, it is more capricious in work, as it easily wrinkles, loses its shape upon contact with paint and is not as durable as wood. Therefore, it requires additional reinforcement in the form of a layer of gypsum mixture. Otherwise, the technique for creating ornaments is similar to woodworking.

Ceramics for decoupage it is not used so often, especially when creating a tea house. In the case of this material, it will not be possible to use only the tools available in the house. If there is still a ceramic house, then it main feature– very smooth surface. When applying cut out patterns, you need to make sure that the parts do not slip off.

Wooden house

Before you start work, you need to decide on the idea: you can make an ordinary house or try to create a hut on chicken legs. Such a solution will be more interesting and unusual. You can also do it by decorating it with spikelets of wheat, or create it. In general, the plot will depend on the ornaments that can be found for application. For a tea house made of wood you will need:

preparation of a wooden box;

acrylic paints (white and colored);
brush or roller;

colored napkins with drawings;
PVA glue;
embossed acrylic paste;
acrylic contour paints.

First you need to cover the box with white paint and let dry.

Advice! If you are not using a special blank from the store for, then go over the surface with sandpaper before painting.

The sides of the house on which decoupage is carried out must be coated with acrylic varnish and dried at room temperature. Then you need to repeat all the steps: paint and varnish again.

Carefully cut out the selected patterns from napkins with nail scissors (only the top layer is used). Put the drawings on the surface of the house and apply PVA glue diluted with water to the consistency of milk with a brush.

Advice! Excess should be blotted with a napkin, removing all bumps and bubbles.

After drying, the house is covered with acrylic varnish. If necessary, you can finish some details with paints or circle the outline of the napkin pattern.

The last stage of work on the facade of the house is varnishing. Apply two or three coats, allowing each to dry. To create, you need to apply a relief paste and highlight every detail. Then apply the paint and, after drying, cover it with varnish.

Advice! To decorate the house, use three-layer napkins. They fit perfectly in their characteristics, are affordable and different. huge amount different drawings.

Cardboard house

If you want to try to create a house from scratch, you can make it out of cardboard yourself. For this you will need:

cardboard and scissors;
a pencil with a ruler;
napkins with drawings;

acrylic paints;
PVA glue;
varnish and thick paper;
eggshell;
twine and brush.

To create a cardboard structure, you will need to cut out 2 square-shaped parts for the base and roof and 4 parts for the walls, in one of which a semi-circular hole is made to dispense tea bags. All parts are glued together with glue and paper.

On a note! It is possible to strengthen structures by gluing a few additional rectangles on the gluing seams.

Simplicity and conciseness are the characteristic features of the Primitive style, which has recently become quite common in modern home decor. To create such an interesting element of kitchen decor as tea house, we need the following:

wooden blank;
black and white printout with our chosen pattern;
artistic acrylic primer;
acrylic paints for creativity (brown, white, sky blue, burnt umber);
stationery PVA glue;
acrylic varnish for the final coating of the product;
brushes, foam sponges, sandpaper.

Before starting work with our house, it must be treated with white acrylic primer. Our workpiece was already sold primed, so we only had to carefully sand it with sandpaper to remove excess soil and level the surface. When decorating a product, we will use an interesting technique - aging the surface with a “dry brush”. To do this, you need to create a lower contrast layer: we paint our future tea house with brown paint.

After drying, we go through the fine sandpaper again. We apply blue paint, slightly diluted with water. Important point: we apply the paint with a dry brush, carefully stretching, rubbing it over the surface.

The paint dries quickly, so we additionally rub it with a hard sponge, aligning the strokes. Once again we will go through fine sandpaper, making small scuffs. We will “implant” the printed black-and-white drawings into the surface “with the face in the varnish”. The place where our drawing will be, we cover with acrylic varnish. We also varnish the front side of the printout and glue the printout.

Strongly press the pattern to the workpiece, smooth it out, expel all air bubbles, glue it. For reliability, you can roll it with a rubber roller. After drying, the pattern from the printout in a mirror image will “transfer” to the varnish. To develop the picture, it is necessary to soak the paper with water: we moisten the kitchen sponge with warm water and soak the picture with it. After soaking the paper, carefully roll up the top white layer until a black and white pattern appears. It is necessary to roll the paper in the direction from the center very gently so as not to damage the pattern.

Let dry. Do this manipulation several times: wet-roll-dry until all the remnants of the paper roll up (no whitish traces remain). We dry. For an additional “aging” effect, we will use burnt umber. In order to be able to correct possible oversights and ugly spots of umber, before applying, we cover the house with one protective layer of matte acrylic lacquer. We will very carefully go over all the faces of the house with a sponge with applied umber. After the umber has dried, we cover it with several layers (3-4) of matte varnish with intermediate drying. The final result of the work is shown in the photo.

The kitchen will become cozier if you complement the interior with cute little things made by yourself. A decoupage tea house will decorate the interior and make it convenient to store tea bags. There is a place for him on the shelf, and it’s not a shame to put it on the table for tea drinking with friends.

Materials and tools for work

Decoupage (from French découpage - cut) is a simple decoration technique that allows you to make unique and attractive things for your home from simple things. The easiest way is to decoupage a tea house with napkins: it is inexpensive and easy, the work will not take much time.

You only need to prepare:

a blank for a tea house made of plywood, cardboard;
acrylic primer;
napkins with interesting motifs;
PVA glue;

Of the tools you need scissors, brushes for glue and varnish, sandpaper (fine).

After gluing the motifs, the background can be painted with acrylic paints, then prepare the paints.

Master class: how to decoupage a tea house

First, the workpiece needs to be processed: “sand” with fine sandpaper. It is necessary to remove all irregularities, roughness, bring the surface to an even, smooth state. Remove all sawdust with a soft cloth and cover the workpiece with acrylic primer.

It is better to apply not one, but two or three layers: this way the picture will be brighter. After the primer dries, sand the workpiece again to a perfectly smooth state.

Now prepare the material with which you will decorate the workpiece. It is better to choose pictures for decoupage of a tea house according to the style and colors of the kitchen design.

For decoration, you can take:

decoupage cards;
special rice paper, from which the necessary motives break out;
ordinary paper napkins with an attractive and theme-appropriate pattern.

You can print the desired pattern on a color printer, only in this case the paper will have to be subjected to special processing - remove the extra layers, leaving the topmost one with the pattern.

From a napkin, a decoupage card, the necessary motives break out (not cut out!) At the same time, the bottom layers must be removed from the napkin, leaving only the top one. It will be very thin, so work must be done carefully.

Decoupage of a tea house for beginners is more convenient to do with the so-called "file" method. To do this, prepare PVA glue, a stationery file, or a medium-density plastic bag. Apply a thin layer of glue to the surface of the workpiece, apply the torn fragments, composing the desired composition from them.

The tea house has right angles, so decorate the sides in turn. After applying a napkin, cover it with polyethylene on top and gently, from the middle of the fragment to the corners, smooth it out to expel all the air. If necessary, you can go over the top of the napkin again with a brush with glue to glue all the edges.

When all the fragments are glued and dry, you can finish the background, and lightly tint the corners by passing over them with a stamp pad or acrylic paint applied to a sponge. So they will look more impressive.

Then you need to varnish the surface. You need to apply not one, but several layers, waiting for the complete drying of the previous layer. The more layers, the better. The varnish will keep the surface from fading, mechanical damage and give your work a spectacular look.

How to decorate a tea house

On sale you can find a lot of different blanks for decoupage. They can have a simple look, imitate birdhouses, houses, huts in old Russian or modern style, castles or oriental dwellings.

Depending on the style of interior design, you can choose decor. In art stores, you can find a variety of voluminous decor that will help you decorate your tea house in an unusual way.

For example, a classic house can be supplemented with voluminous flowers, make an imitation of roof tiles, install shutters on the window, “settle” a small cat figurine on the window.

Complement your favorite white and blue set with a house with Gzhel patterns, and in a Provence-style kitchen, it’s better to create a composition in the same style. Looking at a variety of tea house decoupage photos on the Internet, you can turn on your imagination and create your own masterpiece.

Photo dekupa tea house

Tea drinking is considered a ritual in many countries. For example, in England they gather for tea at a strictly defined time, in Japan they brew special herbal infusions, in Russia tea has long been considered one of the favorite drinks. How to make tea drinking not only tasty, but also beautiful process? Of course, these are not only sweets and sweets, but also the corresponding surroundings. Please yourself and your guests with a pleasant home accessory - a tea house. You can make an accessory with your own hands, while not spending a penny, but only attracting household members to an exciting activity.

Of course, a ready-made tea house can be bought at any store or at a crafts fair, but if you want to please your loved ones with an exclusive gift and take advantage of your free evening, do it yourself. With our instructions, the process will be simple and fun for you.

Ideas for creating a useful accessory can come unexpectedly: craftswomen use any waste material- boxes, plastic or wooden forms, clay, plywood and even ... a cardboard form from eggs. You will be surprised how simply ordinary material turns into a real work of art. In the photo, options for tea houses from different materials.

How to make a cardboard tea house with your own hands - diagram and description

For work, it is better to use not a traditional one - it is too thin, but a shoe box. The first stage is markup. Usually, such a scheme is taken as a template.

And to decorate a tea house, it is better to prepare stencils or chipboards in advance.

Stencils can be useful for such elements, which are shown by an arrow. There can be thousands of variations.

What do you need to work

To create our first masterpiece, we need the following set of tools.

thick cardboard (in this master class the cardboard of the mail box is used);
glue gun;
scissors;
simple pencil;
ruler;
twine;
napkins of two types (for the house and for the base);
acrylic white paint;
tassel;
a piece of cloth;
stationery knife;
acrylic lacquer;
PVA glue.

First you need to make blanks for the walls, roof and base of the house; We do everything according to the scheme chosen by us initially. We have noted these dimensions for ourselves.

We cut out a conditional door and our window. The door can be cut with ordinary scissors, but the window is better with a clerical knife on a wooden board, very carefully so as not to damage the “frames”.

Manufacturing instructions

When all the details are ready, they can be processed with white acrylic paint. This is especially true if you plan to decorate the house in decoupage style. We will talk about decoration options towards the end of our review.

Advice! Sometimes, instead of acrylic paint, a special fine-grained putty is used to give the house the effect of a stone coating.

After the paint dries, you can connect ours. You can watch the full tutorial in this video:

You can use as an example and non-standard design options for a house made of cardboard.

Related article:

This material presents master classes and step by step with photo decoupage for beginners with their own hands using various materials. Do not worry that something will not work out, in fact, everything is very simple.

Master class on making a plywood tea house with your own hands

A plywood house is one of the simplest and most durable tea house options. In some stores you can find blanks that will help us in our work.

What do you need to work

The cost of our project will be minimal: all that is required is glue and paintwork materials, plywood blank.

Advice! In construction stores, plywood is sold, as a rule, in sheets of 1525 × 1525 or 2500 × 1250 mm in size. It is better to look from old stocks, for sure someone has left parcel boxes or other plywood containers.

The optimal plywood thickness for work is 6 mm for the walls and roof, 10 mm for the base. However, if you have 4 or 12 mm thick trimmings at your disposal, there is nothing wrong with that.

Manufacturing instructions

As we already mentioned, a plywood house is usually held together with a special polyvinyl acetate adhesive. It is important to apply it to the joints carefully, then it is important to press all the elements evenly at a right angle to prevent distortions. You can fix all the elements with masking tape. Usually, the entire drying process takes 3-4 hours; an ordinary rubber band will help to press the tape around the perimeter.

For convenience, we have arranged all the stages of work in a convenient table.

Illustration	Action Description
	We cut out the details along the contour. or disk when cutting complex surfaces will have to be used as a choice of recesses at right angles to the edge of the part.
	We process the part with a file, then we finish the corners with a file. The ends of the parts must be strictly perpendicular to their plane.
	We process the details with varnish.
	The elements should dry out within a few hours.
	After gluing all the elements, we got such a tea house.

Advice! The drawing is easy to make embossed. To do this, after fixing a template on the surface of the wall or roof of the house, apply one or two layers of putty; after it dries, paint is applied through the same stencil.

If you want to decorate your tea house, you can try to repeat the following ideas, which are quite interesting, in our opinion.

Workshop on weaving a tea house from newspaper tubes

If you love to weave, then this master class is just for you. A wonderful gift can be made literally in one evening.

Below we will offer a detailed master class for making an exclusive tea house.

What do you need to work

Any work begins with high-quality preparation, in this type of creativity, the foundation of the foundations is. To do this, you will have to study the technology of their creation. Enter in the search engine "how to twist newsprint tubes" and find a master class. The length of the tubes is different - 45 and 55 cm long. In our case, we will cut strips 7 cm wide; if you want a larger weave, then 10 cm.

For those who have no time to look for instructions, we offer a short master class in this video:

Manufacturing instructions

After the material is prepared, it is important to choose the base for braiding. We start from the bottom.

Illustration	Action Description
	We twist the tubes around the base
	We glue the joints with PVA. After that, insert the tube one into one.
	Do not forget to choose the correct shape of the tea house, around which the braiding will be carried out.
	When you decide that the base for your house is sufficient, you need to raise the side racks.
	You can not raise all the racks, but leave a part for braiding the base, in order, for example, to create an additional platform.
	Finishing can be done in a different color combination
	We turn to braiding the base. Please note that at this stage it is important to leave windows for placing tea bags.
	The closer to the neck, the narrower our “top” becomes.
	Once again, pay attention to the technology of weaving!