home » Children » How to weave from wire: schemes and ideas for crafts. Soft colored wire products

How to weave from wire: schemes and ideas for crafts. Soft colored wire products

Wire is the material that is often used to create crafts. It is worth saying that from such material interesting crafts even students can do. And all because this material is flexible. Wire today has several varieties. And each type of wire is suitable for creating certain things. Therefore, in this article we will tell you about which wire crafts are suitable for beginners. Also, these ideas can be suitable for schoolchildren.

Chenille wire and crafts from it

The most successful option for creating crafts is chenille or fluffy wire. This wire bends well and does not break, so it can easily take on absolutely any shape. In addition, in order to cut off a piece chenille wire only scissors should be used.

Chenille wire has another quality. It turns out that crafts from it will turn out unusually beautiful for you. Primary school students today make a variety of animal figurines from this material. And if you also want to make crafts from this material, then you should study a simple master class.

Progress:

First, cut a small piece of wire from which it is worth forming a loop.
Then, on one side, form a small ball, as in the photo.
Wrap the part of the wire that remains on a felt-tip pen or pencil.
Then, we remove the craft and form a tail on it.
From the wire, cut a couple more pieces that should be formed, as shown in the photo.
From these pieces you now have to make paws for the little animal. At the same time, the paws should be folded so that the chameleon can stand steadily on them.
At the end of the craft - the chameleon should be attached with large eyes and a long tongue.

Pay attention to the scheme with which you can make funny little men or interesting little animals.

What crafts to make from copper wire

Copper wire is often used to create crafts. Basically, from this material, the guys make a frame, which is highly durable. And it is on this frame that it is mounted various material, for example, it can be beads, some beads and other elements for decoration.

Below in this article you will find diagrams that will help you see how to fold the wire in order to make interesting crafts with your own hands.

Wire flower craft

If you have patience and have at least a little experience in creating wire crafts, then you should try to take on more complex crafts, the manufacture of which should also bring you maximum positive. Such a flower can be made by older students of the lower grades. To create this craft, you must prepare:

gouache,
cotton pads themselves
glass of water,
starch, PVA glue,
brush,
wire,
teip tape.

This craft is best done at home. And first the paste is cooked. And to cook this composition, you need to dilute one tablespoon in a small amount of water. Then pour this solution in a thin stream into a glass of boiling water. In this case, it is necessary to constantly stir everything. As soon as a homogeneous mass is obtained, it is worth taking cotton pads and moistening them well in this composition.

Progress:

After such a procedure, the discs should definitely be dried, and then painted with paints, that is, with gouache.
Once the paint is dry, cut out the flower petals from the disks. Together it is worth gluing 5 parts. After that, the middle is highlighted with orange paint.
The core should be made from a small piece of cotton wool. The core is usually painted with white paint.
A piece of wire for the stem should be wrapped with green tape. From the same tape it is worth making a couple of sheets. The stalk that turned out is worth attaching to the flower.

Finally

Now you know what DIY wire crafts you can make at home. And here we have collected the best for beginners who decide to do this kind of creativity.

A beautiful ballpoint pen can be woven from ordinary single-core wires in multi-colored insulation or copper wire. Such a craft will appeal to any student and will be beautiful and useful, because wire weaving develops world motor skills, which certainly has a positive effect on the development of the child.

For a braided pen, we need one ballpoint and at least two insulated wires. different colors. Such wires can be taken from a telephone cable or from a cable for a computer network.

First you need to fold two wires crosswise and bend the ends so that they lie on the adjacent ones. The wires should be bent in one direction: either clockwise or counterclockwise. Then gently pull on the ends so that the wire is tightened evenly. The figure shows in detail how to weave a handle from wires or wire.

Insert the rod from the handle into the center and continue to weave to the very end. At the end, tie a knot and cut off excess pieces of wire. Our wicker handle is ready!

If you want to diversify weaving, you can use not two pieces of wire, but more, which will allow you to use more colors and diversify crafts. By the way, this craft will be a good gift, made by hand.

What needlewomen do not make original crafts from, any improvised materials are used, as a result interesting toys, cute decorations and useful accessories for home and garden.

Due to its qualities and ease of handling, wire is one of the favorite materials for adults and children. Wire crafts are made using one of the following techniques:

Filigree. Openwork lace is woven from wire.
Hanutel. The wire is combined with decorative threads.
Torsion. The pattern is formed by twisting the wire.
Beading. Compositions with 2D and 3D effects are created, the wire serves as the basis for beads.

The resulting wire products are polished or “aged”, achieving the desired effect.

Material for work

To make a craft with your own hands, you need to use a certain type of wire. Depending on what product is planned to be made, choose a material from different types metal:

Chenille, or fluffy wire. Brightness and ease of use made it a favorite material for kids.
Aluminum. Durable, flexible, produced up to 12 mm thick.
Copper. Universal material, suitable for all kinds of crafts. Plastic, unbreakable, but weakly holds its shape. Can be painted, coated with precious metals. Similar qualities for bronze and brass wire.
Steel. It bends with difficulty, but keeps its shape well.
From champagne, made of steel up to 1 mm thick.

There are also such types as floristic, cupronickel, jewelry and others.

When choosing a wire for crafts, it is worth considering its parameters:

cross-sectional diameter can be from 0.2 to 2 mm;
in cross section, the shape can be round, flat, square, semicircular;
pile on chenille has a length of 0.4 to 1.5 cm.

Tools for the job

Before starting the creative process, you need to prepare the following tools:

wire cutters / side cutters;
tongs with smooth and corrugated platforms;
scissors;
pliers;
ruler;
glue (silicone or Moment-crystal).

You can start work!

fluffy crafts

Chenille wire is a brush for cleaning smoking pipes. But needlewomen could not leave such a wonderful material unnoticed, especially since today manufacturers have begun to produce chenille wire of various colors and with different pile heights. It is convenient to work with a pliable fluffy wire both at home and on the road, even awkward children's hands can handle it.

Before you start crafting fluffy wire, you need to pay attention to some nuances:

the ends of the wire segments are sharp, it is better to immediately bend them into loops;
elements can be glued together with glue (PVA, silicone) or twisted;
you can shape it by winding it on a pencil.

craft ideas

Kids can make cute toys with their own hands using fluffy wire.

How to make a chenille wire bunny:

we cut the wire into 2 segments of 5 cm and 2 segments of 10 cm;
Fold 1 long piece in half - there will be a torso;
another long piece must be folded in half, each half folded in half again;
connect the ears to the body;
from short segments folded in half, paws are obtained, fix them on the body;
glue a piece of cotton wool - there will be a tail.

Bunny is ready!

A little imagination - and the house will be filled with mice, spiders, octopuses, butterflies, dolls, weirdos and others original crafts. For children, such a pastime is not only exciting, but also useful, because it develops finger dexterity.

Puppet theater characters made of fluffy wire are quickly and easily obtained. How to make Kotofey Ivanovich:

you will need wire, pompom, eyes, nose, glue;
a wire 10-15 cm long is wound around a finger - a torso is obtained;
cut off 2 wire pieces 3-4 cm long, fold in half - these are the ears;
another segment 5-7 cm - tail;
ears, tail fasten or glue, as well as eyes, nose.

From colored wire you get various crafts needed for the holiday:

elements of costumes and eye-catching jewelry;
New Year's toys for the Christmas tree;
flower bouquets and topiaries;
decor for gifts.

Copper in action!

It is good to make a variety of jewelry from copper wire, but before embarking on complex products, it is worth practicing making simple models.

To create elegant jewelry, copper wire of different diameters is required: thin is used for braiding, thick is needed for the warp.

The wire can be painted in different colors, if you combine them, you get original products.

Herringbone pendant

This pendant can be worn on the eve public holidays, hang on a Christmas tree or give. Make it elementary.

Progress:

Take green wire, beads.
Bend the wire into a serpentine shape while slipping on the beads and space them evenly.
From above, make a wire loop, skip the braid for suspension.
From below, carefully finish the work with a loop.

In the ethnic style, a variety of pendants, earrings made of soft copper wire with beads, stones, and beads are made.

Key chains in the form of keys, butterflies or musical signs look interesting. Useful in the house bookmarks, pencil boxes, supplies under mobile phone and a TV remote. All this can be done from multi-colored copper wire, with diligence and imagination.

Bulk products

Thin and medium diameter wire is used to create interior 3D sculptures. After studying the master classes and practicing, you can make real works of art. But it's worth starting with simple options, For example, decorative tree which is believed to bring happiness.

You will need:

wire;
red and green beads;
base stone.

Progress:

Trunk. 5 long strips are woven together, leaving the bottom part not braided, but dividing it into branches from above.
The stone is attached below.
The beads are strung on a small wire segment, one edge is bent, the second is attached to a branch and fixed by wrapping several times.
The branches are straightened.

Aluminum as art

Aluminum is flexible yet strong enough to be used to make souvenirs and jewelry.

From aluminum wire are obtained:

candlesticks;
framework;
hot pads;
napkin holders;
ornamental trees and flowers;
baskets.

Decorative elements for the house, made in 2D format, look interesting. To do this, sketch in life size, then a wire is laid out on it. You can connect the parts by wrapping the ends or fastening with loops.

You can make a bracelet, earrings, pendant - such jewelry is not only pleasing to the eye, but also brings satisfaction to the owner who made it with his own hands.

Wire toys for the New Year will come in handy in any home:

star;
angel;
snowman;
bell, etc.

What to do with thick wire

In order for the cork in a champagne bottle to withstand high pressure, it is fixed with a wire bridle, which is called a muselet. Thickness - 0.08 cm, length - 52 cm.

Most sites offer decorative chairs made from champagne wire. But this does not exhaust the possibilities of this type of material.

Masters create from it real works of art - collectible figurines of little men who dance, feel sad, and do various things.

However, anyone can make original and unusual crafts from welding wire - only imagination and perseverance are required.

hearts

The straightened wire is folded in the shape of a heart. Threads (woolen, half-woolen, textured) are wrapped around the figure. The resulting crafts are strung on a strong thread - a garland to family holiday ready!

Holders

Name holders will help seat guests at the table. To make them you will need:

wire;
a few pieces of multi-colored felt or lace;
champagne corks.

Conditional figures of ballerinas are twisted from the wire, dressed up in fabric skirts. The hands of the dancers will become holders of seating cards with names.

Field for imagination and development

Wire is an excellent material that is easy and pleasant to work with, allowing you to realize the most daring ideas. Such an activity is also useful for children, because it develops imagination, perseverance, accuracy.

Wire and its varieties can be used both in the manufacture of some decorative products, and in an independent form. Due to the flexibility, crafts made from this material are accessible even to schoolchildren, and a rich variety of species allows the imagination to diverge. We will learn how to get started simple crafts from different types of wire.

Chenille Animals

To determine which wire to use for crafts, you need to start from how old the child is taking part in the creative process and what you are going to do.

To create animals, fluffy colored wire is suitable, which children like younger age It is flexible and not brittle. To begin, form a small nub at the end of the wire, then wrap the next piece around a pen or marker and continue as a squiggle tail, pulling out the stationery.

Cut off two small blanks and bend at the tips of the paws, then attach to the body. The color and shape of the figure will determine the type of animal, stick the eyes on the muzzle. From this funny wire you can make plastic men and other interesting things.

copper wire horse

Cut two pieces of wire, one longer than the other. The short one will serve as legs when we bend it at an angle, and the long one will take on the shape of the horse, including the head on the side.

We wrap the entire body of the horse with wire in a colored sheath, ring to ring, close. In places of hooves, the wire is wound repeatedly in a thick layer so that the animal is stable. By the same principle, you can make other animals by finding photos of crafts on the Internet.

Flower

This DIY wire craft is original and not as simple as the previous ones. Previously, a paste is boiled from starch, cotton pads are dipped into it.

After drying, we paint, cut out the petals and fasten several pieces together, highlighting the core with yellow and white paint, which will then be occupied by a piece of cotton wool. A stem is made of wire, wrapped with green tape or electrical tape, leaves are added and fastened with a flower.

Tree

With the help of round nose pliers, hard wire and beads, you can create amazing jewelry. Having twisted a spiral trunk from several pieces of thick wire, we bring them into graceful branches. They can intertwine with each other, and then grow apart, giving the tree sprawling.

Red bead fruits appear in the loops, oblong green bugle beads cover strong branches with dense foliage. It is important to firmly strengthen the rhizome of the tree in a pot with pebbles.

Oil burner

This instance is not the easiest, but the most functional, let's try to tell you detailed instructions for the production of useful gizmos from wire.

We bend a circle from a thick wire and solder its ends with a soldering iron. On this base we solder five equal pieces of wire of medium thickness at an equal distance and bend a little in the middle. After we bring the ends to one point and solder to the base of the floor lamp, a circle of thick wire.

From a metal plate we make a bowl and a side indented by zero as much as five tenths of a millimeter. Now for the upper part of the wire of medium thickness we make four squares different sizes, cut four identical pieces from the same wire.

At an angle, solder a short piece of wire to the largest square, a slightly smaller square on it, and so on. We make a circle from the middle wire, attach it to the legs from the same wires to the very last smallest square.

We cover all parts of the lamp with silver spray paint. Then, with a thin copper wire, we go through the entire body of the floor lamp and weave beautiful patterns into the pattern. large beads, at the same time connecting the two parts.

Vase

Take not too thick and elastic wire and a deep plate. Attach one end of the wire to the bottom of the container and start wrapping around the plate from the outside. You can do this both randomly and pursuing a special pattern.

After the entire plate is covered with wire on the outside, fasten the other end to the first by twisting them together several times and masking the knot between adjacent lines. Remove the plate and level the resulting vase for fruits and sweets.

Figures and decorations

By twisting a thick wire with round-nose pliers, you can create a mysterious frame for unusual bottles, jugs or vases. Also fascinate jewelry made of copper wire, which, as it were, are held in their paws. gems, wrapping around, like a snake, a hand in the wrist, finger or ear.

Such handmade jewelry is filled with pleasant energy and will always be an exclusive addition to the image.

Trees, animals, mythical creatures, abstract figures can become holders for jewelry and jewelry, keys, business cards, tools and gadgets, and making wire crafts will become a favorite pastime for children and adults, if you do not limit your imagination and use your favorite images.

Photo of wire crafts

Wire weaving was especially popular in Soviet times: then people, bracelets, rings, caskets, baskets, key chains, flowers were made from multi-colored flexible twigs. Today, any decoration and useful thing in everyday life can be bought, but it is much more pleasant. do it yourself and, for example, to give mom. Or surprise your peers with an original bauble made of beads and wire. Beginning needlewomen and needlewomen will benefit from an article from the old magazine "Family and School" about how how to weave wire. Here you will find schemes and methods of weaving from wire, draw interesting ideas for creativity.

Material: pieces of telephone cable with insulation of various colors, and thicker wire that will be needed to make frames.

Tools: wire cutters, pliers, hammer and awl.

To make templates you will need: cardboard, paper (thick), ruler and compass.

Schemes and methods of weaving from wire

The first and second figures show different ways of weaving two, three or more pieces of wire. Weaving in the form of a braid (Figure 1, I a, b, c, d, e) . They take a piece of wire, bend it, fasten the second wire to the first one at the bend. For convenience, the upper part is fixed with a nail to the board and weaved, as indicated in the figure. You can make a rope out of two wires. Having connected two pieces, twist them to the right or to left side. Two "strings", twisted in different directions and put together, form a Christmas tree.

Wicker "path" (Figure 1, II a, b) . Taking a wire 1.5 mm thick, bend one end of it, and weave it with thinner wires at the bend until the width necessary for your track is formed. Having finished the first row, the end of the first piece of wire is bent, passing it between the ends of the entire braid, like the movement of a shuttle in a loom, and weaving of the second row begins. Having finished the second row, the end of the first piece is again bent and passed between the ends of the braid, but from the opposite side. In this order, weave the track to the desired size.

Braided round belt (Figure 1, III a, b, c, d, e, f, g, i, j) . The figure shows in sequential order the weaving of a girdle from the four ends of the wire.

When weaving, you need to remember that each row ends with threading the last end into the loop formed when the initial one is bent. A new row can be started from either end, but the last one must be threaded into the loop of the first, thus completing the weaving of the row.

The belt is woven from any number of wires. Figure 2 shows the weaving of two belts around the rod (front view and side view). The rod is made up of several wires laid in a row close to each other.

The first end of the wire is wound behind the rod and forms a loop on the side of the rod, and the second end of this wire, encircling the rod from the front side, is threaded into the loop formed and wound up behind the rod. Then the rod is encircled with the first end of the wire from the front side and threaded into the loop of the second end, and so, performing row after row, you can get a belt of any length.

The second exercise is slightly different from the first, the sequence of its implementation is shown in the figure.

Ideas: what interesting things can be woven from wire

Round wire stand:

On a board of small thickness, carnations without hats are driven in in a circle at the same distance. Then, with two pieces of wire 1.5 mm thick, the studs are braided around in opposite directions. The third piece of wire is placed radially between the nails, fastening the outer braid. The center is tied with a thin wire. The resulting frame is braided with a fourth, thinner piece of wire. Weaving on the frame starts from the center. Having fixed the end of the wire, weaving is carried out in a circle, alternately bending around from one side, then from the other, radially located threads.

Wire basket:

The frame is assembled from an even number of pieces of wire - 6, 8, 10 or more, depending on the size of the basket. First, a ring of the correct shape is bent, and then two risers, a bottom and a handle are made from one piece and fastened to the ring. Further, the rest of the risers and the base for the bottom are bent out of four pieces. Having bent the upper ends, they are hung on the ring, tightly secured with pliers.

First of all, weave the bottom. Having fixed the end of the wire in the center, several weaves are made in a circle, similar to the weaving of the stand, and then they switch to the weaving of the radial threads that form the bottom. In the same way, the risers of the sides are braided.

With this method of weaving, gaps remain between horizontally running threads. The base of the handle is braided with a thin wire, tightly fitting the spiral rings to each other.

Wire shopping bag:

For work, you will need a thick cardboard, equal in size to the intended bag. Points for the holes for attaching the handles and the frame of the bag are marked on it with a pencil. Holes are pierced in the designated places with an awl and two metal or wooden rings for handles are made. The finished handles are placed on the cardboard (at the attachment points on both sides) and fastened to the cardboard with a thin cord or wire, as shown in the figure.

In the manufacture of the frame, the wire threads are passed through the holes and thrown onto the rings of the handles. Then, in one of the ways, they start weaving from the bottom up. After the sides of the bag are ready, the cardboard is removed. For winding handles use a thin wire.

DIY colored wire flowers:

Figure 6 shows how to make flowers from spirals.

The flowers are collected in a bouquet and the "stems" are wrapped with thin wire, the ends are divided into separate bundles (8 - 10), which serve as a frame for weaving the base of the vase. The weaving method is the same as for the sides of the basket (see Figure 4).

Dog and deer:

The body and head of a deer are woven in the form of a round belt (see Figure 1).

The front legs are woven into the body and pass into the neck, made by the method of spiral winding. The doggy consists of a frame braided with a coil.

How to bend and join wire

Many different items can be made from wire - from the simplest hook to the most complex patterns. Suitable copper, iron, steel, aluminum wire and telephone cable with a different color coating. The wire is stored wound in circles. Of the tools you need: a hammer, a small vise, a file, pliers, wire cutters, pliers, pliers, round nose pliers, metalwork scissors, a soldering iron.

The wire is straightened by pulling it between two wooden blocks or by pulling it tightly around a round metal rod (door handle). Steel wire or thin bar metal is best straightened on a hard surface with a hammer or mallet. Small parts are bent with pliers or round nose pliers. Large and hard - bend in a vice.

Iron and copper thin wire is cut with wire cutters and pliers. Steel - in the place of the cut, it is preheated over a fire. Strip or sheet metal is first marked out, and then slightly incised at the marking points and chopped with strong blows.
Separate pieces of wire and other metal parts are connected by bending or soldering. In the first case, several turns are made, pulling the wire onto the rod. Before soldering, the surface of the parts is thoroughly cleaned with a file or sandpaper from dirt and rust. The wire is soldered by folding the two ends together, after twisting them for strength. A thin wire can be soldered using a paste - tinol, which is applied in a thin layer to the place of soldering and heated over a fire.

To learn how to do things from wire well and cleanly, you must first make some simple details:

Spiral spring. A wire 1-1.5 mm thick is wound on a round wooden dagger of a cylindrical or conical shape (Figure 1, a).
Rings and half rings. The spiral-spring is cut lengthwise (Figure 1, b).
Flower. Six half rings are soldered to the ring (Figure 1, c).
Gear. Six half rings are soldered together [Figure 1, d).
Spiral. They take the end of the wire with round-nose pliers and twist it around by rotating the hand in a circle (Figure 1, e).
Openwork of three spirals (Figure 1, f).
Openwork leaf. On a blank of a conical shape, 4 - 5 rings are made (wire thickness - 0.5 - 1 mm). The resulting rings are shaped as shown in Figure 1, g, and soldered at the base.
The shamrock is bent from one wire with pliers (Figure 1, h).
Wave (Figure 1, i).

Star and ornamental stripe. On a board of small thickness, mark out the drawing and drive in nails without hats:

net:

Flower girl. A bracket with a spiral termination is bent from a two-millimeter wire. Separately, the ring is rolled up and fastened by intercepting the sides. At the top, the spirals are connected by three turns of wire (Figure 4).

Furniture. It is made from one and a half to two millimeter wire. Its parts are fastened together with coils. Thin-layer plywood or cardboard can serve as a seat and table top. For fastening in plywood, small holes are made with an awl (Figure 5).

Puzzle. It is necessary to separate its parts so as not to bend the wire anywhere and not to compress it (Figure 6).

Horse. From two pieces of wire 2.5 - 3 mm thick, the legs and two lower spirals are bent. From the third piece make the head, neck and upper spiral. From the fourth - a mane, turning on the back into coils fastening pieces of wire. The mane is soldered in several places (Figure 8).

Heron. It is made from one piece of wire (section - 3 mm) with spiral rings for a decorative vase (Figure 9).

I. Lyamin, Family and School magazine, 1971