home » I am 50 » Funny key chains made of beads with your own hands. Beaded key chains: weaving patterns and a step-by-step description of the work

Funny key chains made of beads with your own hands. Beaded key chains: weaving patterns and a step-by-step description of the work

Keychains made of beads with patterns for weaving with your own hands (photo)

Once upon a time, with the help of key chains, only bundles with keys were decorated. And now this fashion accessory can be found everywhere. Key chains adorn our bags and wallets. They are hung on phones and even on trousers and jackets. In addition, it is not at all difficult to make a keychain with your own hands. They are created from fabric, felt, clay and everything that only falls into the skillful hands of a craftswoman. Indeed, in addition to being beautiful, the creation of a keychain helps to use up those materials that seem to be no longer suitable anywhere. Beaded key rings are especially popular among needlewomen, both experienced and beginners. These small products are stunningly beautiful, and a minimum of materials is used for their weaving. The schemes according to which beaded key chains are woven are simple and quite diverse.
For weaving, you can use absolutely any technique. A beaded keychain can be flat or voluminous. It may consist of one part, or it may be assembled from several elements. Such a cute product, which is easy to make with your own hands, will become a wonderful gift for friends and acquaintances.

Keychain from beads "Smart apple"

Beaded key rings, which consist of several similar parts, are absolutely simple even for beginner craftswomen. For their weaving, various schemes have been created, on almost any topic. And using such schemes is not at all difficult. Consider weaving such a beaded keychain using the example of a green apple.
To create it, the following schemes are used:

The beaded keychain "Smart Apple" is woven with brick weaving according to the scheme. At the end of the first half, you can stop. And you can weave another one using the same weaving technique. And join the two halves together.
If you want to do flat keychain from beads from one piece, then use wire to weave it. Then it will be tighter. And if you still make an apple in two parts, then it is better to make it with a fishing line.
We start weaving each half of the apple from the middle. In order to detect it, conditionally divide the scheme with a vertical line. After we have collected the required amount of beads, weave in brick technique to the end. And then attach a new piece of fishing line and weave in the same way, but in the other direction. The second half must be done the same. The scheme is simple even for beginner craftswomen.

After both parts are completed, they need to be sewn together through the beads located along the edge. Lightly stuff the apple with any filler to give it a convex shape.

Attach the ring to an apple shank or add a chain of green and pearl beads to it. And that's all. A wonderful handmade accessory is ready. Decorate your child's school backpack with it. This apple is perfect as a decoration for any things related to study or books.

Bulk beaded keychain

As mentioned earlier, beaded keychains can be not only flat, but also voluminous. Let's look at how to do it yourself voluminous heart for a keychain.
For weaving it is better to use large beads or bicones. But it can fit in principle any size. This keychain can look very interesting if you use elements different sizes. Such beaded keychains are woven very simply. At the heart of weaving is a regular cross.

In this way we weave several rows.
We get a detail resembling a heart in shape, but only angular, without rounding.

We need two such blanks.
And now these parts need to be connected to each other. That is, simply sew, but using the remaining beads or bicones. At the same time, we will, as it were, create the side surface that we lack.

Now it remains to create
. Just put the beads on the fishing line and attach this low at the top of the heart. You can attach a keychain ring to this loop. Such beaded key rings can become a memorable Valentine for a loved one.

Keychain in the shape of a sheep

Consider how do-it-yourself bead keychains, consisting of several parts, are created using the example of a lamb keychain. To weave it, prepare a monofilament, Czech beads of the tenth number. We will use mainly pink and white colors. But we still need 2 black beads, 3 light pink beads and one red bead. You also need 4 black beads. Their diameter is 3 mm. Prepare another synthetic winterizer for stuffing, a base for a keychain, five pins with caps and 4 metal rings 5 mm in size. As well as round nose pliers and wire cutters.
The work is based on the usual technique of weaving a cross.

We start with the body. We use a piece of monofilament one and a half meters long. We thread both edges of the thread into needles and start work with the cross, which is indicated in red in the diagram. It is important not to forget that the crosses in the corners do not consist of four beads, but of three. At the end, the monofilament is tied, but not cut off. You need two of these. They float the same way.
Now these halves should be connected so that crosses are obtained between them. So we connect around the entire circumference. Don't forget to leave room for stuffing. And at this moment, you need to take care of fastening the key fob and make a loop with the help of a pin. To do this, thread the pin through the hole so that its hat remains inside the lamb. And outside, wrap it in a ring using round-nose pliers. Now you can fill the sheep with padding polyester and sew up the remaining area.

Now we begin to create a muzzle of pink beads. We use a piece of thread 70 cm long. We thread each edge into a needle and weave according to the pattern. Here you will need to make interweaving of colored beads, indicated on the diagram according to the colors. At the end of the work, we do not cut the thread. With its help, you need to attach the muzzle to the body. To do this, we complete the crosses of the muzzle with the help of crosses on the body. Before completely sewing on the muzzle, lightly stuff it.

We carry out the ears according to the scheme. For weaving, cut off 40 cm of thread. We bring the thread out of the edge of the eyelet and go up along the edge, adding the missing beads for a smooth edge. After that, we draw the threads at the top through three beads towards each other and add one more element in order to make a cross. Weave both ears and sew them to the body.

Now we will weave two rows of crosses with white beads over the muzzle and connect them with the muzzle. This will be an imitation of wool. In each of the two rows you need to make five crosses.
In order for our sheep to have a tail, we simply weave one cross of four elements to the beads of the body in the place where you want it to be.

In order to make a sheep's eyes, string five beads onto a thread and pull off a ring from them. Do it one more time. Now, with the help of black beads, sew these rings to the muzzle.

Attach the blank for the keychain to the loop previously made from the pin. And it remains only to make paws. Take four pins and put a black bead, three pink and two white beads on each. Now pinch the tops of the pins so that you get rings. Where, in your opinion, the paws should be attached, we pass through metal rings. We put our paws on them and clamp them with the help of round-nose pliers.

Here is our cute little thing. Most importantly, this keychain is not only cute and original, but also made by hand. And hardly anyone will be able to refuse such a gift.

Video: Master class on weaving a keychain from beads

Comments

Beaded necklace: do-it-yourself weaving lessons (photo and video)

A keychain is such a little thing that almost every person has. In this article we will tell you how to weave them from beads: diagrams, photos, detailed descriptions - everything that will help you in this matter.

So let's get started. We offer you very detailed wizard class for beginners.

Keychain made of beads with the sign of the zodiac

To make such a keychain, we need good calibrated beads, otherwise the pattern will not be clear.

Materials:

Beads (black, silver);
Synthetic thread (black and white);
Needle for beads;
Accessories: loops for a key ring with a carabiner (black, or black-silver).

Making a keychain

First you need to choose your zodiac sign or the sign of the person for whom you will weave a keychain. We will use the following patterns for weaving:

In this diagram, the signs of the zodiac are arranged in the following order:

Aries - Leo - Sagittarius;
Taurus - Virgo - Capricorn;
Gemini - Libra - Aquarius;
Cancer - Scorpio - Pisces.

Having chosen your sign, you can start weaving. The most suitable technique for making such key rings is hand weaving.

You need to start weaving from the lower right corner up. Already when weaving the first row, both colors of beads are used (according to the scheme)

If you want the charms to be more voluminous, after the last row ends, weave further. As a result, the weaving pattern will be as follows:

Red marks the place of attachment of fittings.

When weaving the wrong side, it is necessary to make an inflection on the key fob, because if the weaving is very tight, then we will not be able to bend the key fob.

It is necessary to immediately sew the wrong side and the front side along the extreme beads with the help of thread jumpers

Inside, between the front and back sides, you can insert a piece of cardboard, then the keychain will keep its shape well.

We attach accessories and a keychain.

This is how easy and fast you can weave an interesting and stylish keychain.

Key chains made of beads in the shape of hearts

A very popular theme for weaving key chains is hearts. There are many ways to weave such things.

For example, this keyring:

It can be woven not only from beads. but also from small pearl beads with a diameter of about 4-6 mm. Inside you can insert cardboard, paper, a piece of cotton wool. It looks great not only in pastel colors, but also in bright and contrasting ones.

Here is such a pink heart that a young and romantic girl will surely like:

The keychain is made using a very simple technique - a cross on 2 threads. You need to weave 2 hearts and connect them with faceted beads.

A bright rainbow heart will warm the warmth of the one to whom it is presented.

In order to make such a keychain, you need faceted bi-conical crystals, about 4 mm in size. Weaves on a fishing line with the help of technology - a cross.

What other beaded key chains can you make with your own hands?

slice of citrus

For example, the keychain "citrus slice". Everyone loves these keychains. They look so delicious and juicy that you want to definitely taste them. A slice can be orange, and lemon, and lime. The essence and scheme of weaving is the same, only the color of the beads changes.

It is better to take beads matte, plain and bright. If you need a whole slice - just weave 2 identical, round slices, sew, and if you like halves, then you need to weave one round and bend it. In order to avoid problems when bending, it is initially necessary to collect an even number of beads on the thread.

Very bright and funny keychain "Ladybug"

To make it, you need only 20 black beads and 38 red ones. The diagram shows how to thread the thread, and at the end you need to tie a double knot.

Bee

Or such a bee. It is woven on two threads.

To weave it, you need only 12 black beads and 39 yellow ones. The thread is threaded in the same way ladybug and tied in a knot.

Any handmade keychain will bring a lot of joy to your loved ones.

How to weave a beaded keychain for beginners

There are a lot of bead weaving techniques, we will consider the “brick stitch” technique. This technique is used to weave flat and voluminous figures and create:

key rings;
- earrings -;
bracelets;
necklaces and pendants;

Here brick weaving pattern: beads fit like bricks.

Second brickwork method- this is a mosaic weave, the beads are woven vertically and not so twisted.

Flowers are especially successful in this technique: delicate or royal flower, white.

Using the “brick” weaving technique, use a fishing line or thread to match the beads. So the product will look neater.

Owl beaded charms made with brick stitch

These are patterns for weaving flat figures. They are done in the technique of "brick" weaving.

Let's look at one diagram specific example and create a beaded keychain with our own hands using the “brick” technique.

Here is the craft diagram:

To create an owl keychain we will need:

beads: white color, black and gray colors;
fishing line;

needle;
beads (various by 4 mm) - 7 pcs.

Getting Started:

Weave the second row.

From the third row we begin the expansion.

Weave the fourth row.

Let's go to the fifth row.

In the seventh row, we will reduce the number of beads.

In the eighth row Dial 2 black, 9 white and close the row with 2 white.

In the 9th row string 2 black, 8 white and end the row with 2 black.

In the 10th row cast on 2 black, 9 white and end the row with 2 black.

Starting from the 11th row, is decreasing. You draw 2 blacks, 8 whites and again 2 blacks.

in row 12 string 2 black, 7 white and close the row with 2 black.

In the 13th row dial 2 black, 6 white and again 2 black.

We wove the body of an owl, now We turn to weaving the head.

We continue the series decreasing and enter new color- grey. Dial gray, 3 white, black, again 3 white and at the end of the row gray.

In the next row (this will be the 15th row), cast on gray, 3 white, 2 black, 3 white and 1 gray.

In the 16th row string gray, 2 black, then 3 white and again 2 black, white and finally gray.

In the 17th row dial like this: gray, white, black, white, black, 2 whites, black, white, black, white and gray.

Starting from the 18th row, we will subtract. Dial: gray, white, 2 black, white, gray, white, 2 black, white and gray close the row.

In the 19th row dial: gray, 3 white and 2 gray, 3 white and gray again.

In the 20th row dial gray, 2 white, 3 gray, 2 white and finish with gray.

in row 21 dial 8 beads gray color.

In the 22nd row proceed to the design of the crown with single beads. For this:

dial a gray bead;
hook the thread between the last two beads of the 21st row with a needle, return through the bead you just dialed and tighten;
pull through the seventh bead and exit through the sixth in the 21st row;
braid 3 pcs. gray color;
go out of 2 beads of 21 rows and braid gray, as described above.

In the 23rd row weave 2 gray over three medium gray.

In the 24th row weave a gray bead in the center of two gray ones from the 23rd row.

Dial a bead, and after it a bead. Go back through the bead and hide the thread in the weave.

Ready.

Using the brick weaving technique, we will make a black cat beaded keychain.

For him we need:

black beads and contrasting with it for the eyes and mouth;

fishing line to do almost all the work;
tail wire.

Let's get to work as follows:

Start weaving from the middle of the head and from the longest row, move first up and then down.

Having made the body, proceed to the tail. To do this, pass the wire between two beads and fold it in half. Collect beads on both ends.

Fasten the wire by making a turn around the last bead, and for reliability, pass the ends of the wire through a few more tail beads and only then cut. Keychain is ready.

Here are the patterns of flat weaving with a “brick” of cats.

The schemes for weaving beaded key rings in the form of a dog are presented below.

We will weave a dog according to the following pattern:

We will need:

beads (black, white and brown) and wire.

We start weaving from the nose of the dog: between two white beads weave a black one.

To form the ears, it is necessary to insert a separate piece of wire and weave the ears without volume.

The tail is woven in one row, and it will not be rigid, it can be bent to any position.

After all the elements are ready, hide the pieces of wire by cutting off the excess. The dog is ready.

A man can be presented with a beaded keychain, woven with his own hands, based on his hobbies. If he has a car, then it can be a keychain with a car logo or number.

If he plays musical instruments, then it may be like this:

If you are interested in football or basketball, here are the key rings:

Well, this can be a hobby:

Watch how to weave an owl using the brick weaving technique and do it along with the video.

Weave a flat beaded dog for beginners. See the video for step by step instructions.

Don't know what to give a man - a beaded heart keychain original gift. Learn to weave with this video.

We talked in detail about one of the beading techniques, you just need to stock up on material and start weaving. What did you get, write.

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Beading is an art that has won the hearts of many needlewomen. Having studied the craft, you can make all kinds of beautiful products. It is striking to see an accessory made with my own hands especially as an exclusive gift. Even a beaded keychain can become memorable for your loved one if it is made with soul.

How to make a keychain with your own hands

Having everything you need at hand, you can make jewelry of any complexity. On the Internet you can find countless descriptions of any technique for making flat or voluminous key rings. Before starting work, the mistresses need to arm themselves with all the tools and material. You will need:

Beads of various shapes, colors, sizes, materials. Due to their diversity, you can make picturesque beaded key rings that will amaze with their originality.
Fishing line, strong thread, flexible wire, rubber. In addition, you will need clasps, snakes, buttons, chains, cufflinks, a carabiner.
A set of thin needles, scissors, tweezers, special pliers, a saucer, a ruler, a piece of cloth on which the beads will not slip.

Bead figurines for beginners

It will be fun to weave beaded key rings for the smallest dreamers. True, initially you will have to use simple schemes. Having got the hang of it, artisans will be able to independently invent their own patterns and beading techniques. The main thing is not to beat the hunt! To do this, it is necessary that, if possible, a ready-made craft and a multi-colored diagram with a step-by-step description already lie on the table. Then it will be interesting for the child to do everything from the beginning and show his parents his master class. The simplest figures will be:

looped flat butterflies;
snakes;
flowers;
Sun;
physiognomy of animals.

How to weave a keychain

Learning how to make beaded accessories is not too difficult. The main thing is patience and care. After a while, everyone will be able to make key rings with their own hands. Crafts will not only decorate the handbag, but also become an unforgettable souvenir for your friend. When deciding on a scheme, be confident in your abilities, but be sure to prepare your workspace. With good lighting, a clear schematic image and a great mood, you will definitely succeed.

For keys

How to make a keychain from beads? It's easy if you already know what will decorate your keychain. For example, it can be a flower, a voluminous handbag, a beaded bow, an orange slice, a ball, a snake. Help you make a choice detailed instructions weaving starfish from beads of two colors:

We string 5 beads on the fishing line and close the ring.
We add beads through one, and at the end we pass the needle through 2 beads. You should visually get a star.
We make the third row according to the same principle, but we already string two beads each.
Let's make stars! We attach two beads in turn, then one, and so on, until the circle closes.
In the fifth row, where the rays are, there will be 2 beads each, and between them - one through one.
We repeat everything according to the scheme, lengthening the rays (up to 6 pairs of beads) and adding peas between them according to the same principle.
In the last row, add one bead in a circle, making the rays pointed.
We put the accessory on a metal chain with a ring.

For mobile phone

To transform things that you always have at hand, it is better to make key rings from colored material. It can be zodiac signs, different animals, berries, spiders. For novice craftsmen, it will be easier to stop their eyes on accessories made in one row. For example, you can take as a basis the instructions for weaving the keychain "Orange Slice":

We put 7 white beads on the fishing line. We make a loop, connecting the threads through the last piece of glass.
We do the 2nd orange and 3rd white row like this: one more ball is woven through one.
Then, in a circle, 2 peas are strung through each glass of the previous row.
The next level is created again by one ball.
Then two orange pieces of glass and one white piece alternate. The latter should coincide with the line of separation of the slices.
Then we do everything according to the same principle, focusing on the previous two steps.
After 3 levels, 4 orange beads are woven between the white beads. If desired, you can lengthen each slice in the same way.
We add white beads around the circle in two rows, and then, we complete the manufacture of the keychain with orange beads.

Heart

Heart keychains are easier to make than you think! Such a delicate souvenir can be presented to your boyfriend or girlfriend, who will be delighted with a handmade gift. If you want to add volume to the figure, then the beadwork can be sewn to the padding polyester. Instructions for creating a keychain:

We put 3 red balls on the fishing line. We make a loop, once again threading the thread through the first two beads. This straight brick technique is simple, so it will be easy for you to weave a heart.
We will braid 2 more balls, threading the fishing line through the previous two beads. We fix the workpiece by passing the needle through the last piece of glass.
We take the next ball, and thread the thread under the same loop. Then again we pass through the beads.
Next, we interweave 2 glass pieces at once into one loop of the previous level, and two alternately into the other. It turns out only 4 elements of this series.
By the same principle, we make subsequent levels, each time increasing the next loop by one bead. Subsequently, you should get 6 balls on one line.
We string 5 beads and, skipping one loop of the row, insert the thread into 3 pieces of glass from the edge.
Again we do the same procedure, only from the opposite side.
So that the key rings are without holes, we string one bead on the thread and close the gaps.
At the end, we go through the fishing line around the entire perimeter of the heart. We make a decorative loop of balls and attach a carabiner.

For men

If you want to impress young people, then make beaded key chains. This spectacular accessory will look solid both on a mobile phone and with car keys. As a basis, you can take a pattern of weaving from guitar beads, a keychain with a car emblem, a cube, a dollar, a tire. As an example, you can find a brief instruction on how to create a very simple Horseshoe keychain:

We make a square of 4 beads. We string them on the middle of the wire and close the ring.
We put on both sides of the thread 1 and 2 beads. Again we make a vicious circle, fixing the chain through the last ball.
We do this until the flagellum is the desired length. We fasten the ends of the wire with pliers.
We give the product the shape of a horseshoe.

New Year's key rings

What else can decorate Christmas tree, no matter how handicrafts of dear people? This could be the talisman of the coming year, Christmas decorations from beads, voluminous snowmen, Snow Maiden. You can make a bright Christmas tree and be touched by it in your office:

We bend the edge of the wire into a small ring, using pliers.
Instead of a star, 3 red elements will be visible at the top of the tree.
Next, we string multi-colored beads of any diameter on the thread.
When everything is ready, repeat the procedure as in the first step. So the tree will not crumble.
We twist a spiral on a flat surface from one row of balls and, pulling the top, give the tree a shape.

Find out more ideas on how to create

Beads are a great material for all kinds of jewelry, baubles and many more creations. And if you show your imagination, you can create an exclusive that will not only please the eye, but also warm the soul, because this beauty was created with your own hands. Many of us like to decorate not only ourselves, but also household items, such as keys or mobile phones. There are many models of these trinkets on sale. But such beauty sometimes costs a lot for a trinket, and there is a high probability that you will meet the same one from someone, and all the joy of buying will disappear. Therefore, it is better to make your own beaded keychain, schemes, fortunately, you will find in this article.

How to make a beaded keychain "Orange slice"

Below is detailed master class about how to make a beaded keychain with your own hands on the example of the product "Orange Slice". Detailed description and photos allow even a beginner to cope with this task. First, prepare the materials for work.

Keychain material

Beads of three colors: dark orange, light orange and white.
Monofilament. It is very similar to a thin fishing line, as thick as an ordinary thread, but it is quite strong. Sold at any craft store.
Needle for beads. It is much thinner than usual, and easily passes through the beads.
A cotton pad, you will need it to fill the keychain.
Ring and cord for hanging.

Beginning of weaving from 1 to 3 row

Cut a monofilament 1 m long and string 7 white beads on it, then pass the needle and thread through the first bead, as shown in the figure b.

Now take the light orange beads. It needs to be braided between white beads, as in the picture. V. Beads should be 7.

Take 7 more white beads and pass them between the light orange ones in the same way as in the previous version.

Weaving subsequent rows

After the third row for weaving, you need to take two light orange beads, that is, there should now be 14 of them in a row. The weaving technique is the same.

For the next row, take one orange bead and weave them between two beads of the same color, and weave the white beads over the white ones.

This row must be weaved in the same way as the previous one. But take only orange beads and weave them over the same color.

In this row, weave white beads over white again, and take orange beads in a pair and weave between beads of the same shade.

After that, take white beads and make 2 rows without increments.

Take dark orange beads and start weaving the 1st row in the following sequence: 1-1-2, then weave two more rows, but without additives.

Fold the orange slice in half and knit the final row on one side only. When this is done, put a cotton pad inside the product, after cutting it so that it is slightly smaller than the slice.

Now sew the edges of the slice together as shown in the figure with a brick stitch.

Now, in the corner of the keychain, in which you finished sewing the slice, make a loop of beads, and before fixing it, thread it through the keychain accessories, then fasten it. That's all, the lesson on how to make a beaded keychain for a beginner is over. Orange slice is ready.

Such a keychain can be made not only in the form of an orange, but also in the form of other fruits, for example like this:

And here are examples of key chains made of beads of a different type:

Key chains can be hung not only on keys, they can decorate a wallet if it is locked, mobile phone, backpack or bag, and even such a product can be hung in the car , For example, here is a cube: