home » School » How to make a textile brooch with your own hands. Master classes

How to make a textile brooch with your own hands. Master classes

A strip of fabric at least 40-50 cm long and not 7-10 cm wide (2-3 strips can be used in one flower for splendor);
Beautiful beads or buttons, you can also use beads;
Threads and needles for sewing;
Basis for a brooch;
Tailor's scissors ()

Recommended fabrics: natural fine fabrics such as silk, chiffon, cambric, yolk, muslin and even dress wool.

How to make a fabric flower with your own hands

Step 1

Fold a strip of fabric with an accordion (the size of the petals depends on the width of the fold);

Step 2

So that the "accordion" does not crumble in your hands, you can smooth out each fold.

Step 3

Secure the resulting "accordion" with a tailor's pin.

Step 4

Step back from one short cut 1.5-2 cm and cut out the shape of the petal.

Step 5

Cut the strip, iron and shape the petals if necessary.

Step 6

Gather the strip along the edge of the cut with small stitches by hand. Or sew a stitch with the maximum stitch length on a sewing machine.

Step 7

Pull off the strip

Twisting it in a spiral to get the shape of a flower.

Step 8

Fasten the thread.

Step 9

From the front side of the flower, sew to the center beautiful bead or a button.

Step 10

From the wrong side, sew the base for the brooch.

This is how you can easily and quickly make a flower out of fabric.

Petals and open sections of the strip do not need to be processed.

Wear this beautiful accessory as a brooch or hair clip, use it as a decoration for a bag or belt. If you want to get the petals of the same, even shape, you can first draw a template and cut out the base for the flower using it.

What woman does not love new interesting jewelry! And if you imagine that the original jewelry will go to its owner almost for nothing? Is that possible?

Yes, if you choose textile brooch.

Make fashionable do-it-yourself textile brooch quite simple - pick up fabric, buttons and rhinestones, ribbons and lace, fasteners and everything that your imagination and your own taste will tell you. No need to buy new textiles: rummage through scraps, in mom's stocks and in grandmother's bins. Surely something beautiful has been languishing in your handmade treasures for a long time and is asking for light.

You can take the shreds left over from sewing the dress, then the do-it-yourself brooch will be perfect for your outfit. Feel free to use embroidery, knitting and lace, and the decoration will become a vivid reflection of your personality.

Be sure to check out master classes on making textile brooches with your own hands, which you will find on the links below the photo.

And also look and see the materials of our site by tag. Well, now that the theory has been studied, it's time to start practicing and make a beautiful textile brooch with your own hands!

How to make a textile brooch with your own hands. Master classes

1. DIY textile brooch, master class from "The decorated house".

2. How to make a textile brooch with your own hands, master class from "All Your Hobbies".

3. DIY textile brooch from lace and linen from Galina.

Some people think that it is impossible to look fashionable and bright without big financial investments. It's not like that at all. Create a modern and stylish look possible without any extra cost or effort. For example, at home, make do-it-yourself brooches from fabric, leather and other most affordable materials that are likely to be at hand.

Handmade fashion accessory

A stylish brooch is a universal accessory, the main function of which is to decorate and attract attention. He will add to female image touch of charm and romance.

With it, you can easily emphasize the advantages: a thin waist, a magnificent bust or beautiful hairstyle. It all depends on where the woman prefers to fix it. The decoration will look even more spectacular if it is correctly combined with a dress, bag, shoes or any other accessory.

That is why an exclusive brooch should be present in every girl's wardrobe. Jewelry looks especially advantageous this season. self made. Making them yourself is quite easy. Even beginner craftswomen will be able to make an exclusive fabric brooch with their own hands. Master class on creating jewelry help to avoid mistakes in the process.

Making decorations from pieces of fabric

From ordinary little things that are always at hand, you can make a very unusual and elegant decoration. At the same time, you do not need to have special skills and abilities at all. All you need to purchase in the store is only special fasteners-pins.

The principle of operation is very simple: all the necessary details are fixed on a dense base with the help of threads or glue. The final step decoration is decorated with beads, wood, lace, rhinestones and other little things. The main thing is to correctly combine textures, colors and sizes.

A clasp is attached to the back of the accessory on a dense base. Unnecessary pieces of natural fabrics, for example, knitwear or cotton, can act as decor details. Since they hold their shape well, it will be very convenient to fold various origami figures from them, and fasten the edges so that they do not unfold. Fabric details also look no less impressive., the edges of which are crocheted.

Soft felt brooch

Felt is a very soft and pliable fabric. The material perfectly holds its shape and does not crumble. Therefore, it is very comfortable to work with him even for beginner craftswomen. A flower brooch made of felt will look very gentle and expressive on any clothes. Before you make a brooch with your own hands, you need to prepare the following materials:

Felt fabric in beige and light green.
Threads golden color and a needle.
Scissors.
Large bead or button for the center of the flower.
Special fastener for a brooch.

The first step is to transfer the pattern below to the fabric. And then carefully cut out the details along the contour, observing the difference in size, so that the flowers look more realistic.

In beige flowers, a hole with a diameter of 0.5 cm should be cut out. The petals are stitched with a golden thread. Threads can be taken in a different color, as long as they blend well with the fabric. Leaves are cut out of green felt. Fasteners will be sewn to them, with the help of which the decoration will then be fastened to the fabric of clothing.

Now the details of the petals can be connected with the help of threads or glue with the leaves. As a middle, a large bead is used to match the threads. An elegant felt flower brooch is ready.

It is worth taking note that if the brooch is made of felt, then as a decor it is very details made from natural materials will be beautifully combined: burlap, wood or leather.

Denim flowers

If a pair of old jeans is lying around in the closet, you should not rush to carry them to the trash. DIY jeans brooches are perfect for any outfit and give the look a little femininity and piquancy. Step by step master class for making brooches denim will help to understand difficult moments and make the accessory truly original. To create a craft, you will need the following tools:

The first step is to cut out a piece 90 cm long and 6 cm wide from old jeans. One edge of the workpiece is left even, and the second is cut off in a wave-like manner. Pieces of excess fabric can be torn off. No need to worry if the workpiece is not very neat. A little negligence will make the brooch even more unusual and exclusive.

The second edge, the one that remained untouched, is sewn with small stitches. It is recommended to pull the thread a little. Now you can form a flower in a circle.

The resulting workpiece must be carefully stitched from the wrong side. The next step is the middle for the brooch. To do this, a piece measuring 22 by 3 cm is cut out from a piece of chintz fabric. A small knot is tied at the end of this piece., which wraps the fabric around its axis. The free tip can be fixed with an invisibility. With small stitches, the middle is sewn from the wrong side. Finished part sewn to the very center of the flower.

The jeans brooch is almost ready, it remains to make the base. To do this, a circle is cut out of jeans, the edges of which are processed using sewing machine. A fastener-pin is sewn to the workpiece. Then this circle is very carefully glued to the denim flower.

At the final stage, you can add lace to the finished brooch or sew on a few beads for decoration, or sheathe the flower with decorative braid. It is enough to turn on the imagination and the brooch from improvised materials will turn into a masterpiece of needlework.

Unusual satin craft

A rose brooch made of satin will serve spectacular decoration in summer style. Such an accessory will look great both in hair, hinting at the Hawaiian style, and on a dress or jacket. To work you will need the following:

The first step is to process the material yellow color with a special solution to make the fabric very flexible and pliable. To do this, mix a bag of gelatin and 250 ml of water. Mix the solution thoroughly and put it in a dark and cool place for about an hour. After this time, put the container with the solution on medium heat and bring to a hot state. There is no need to boil. Now the resulting mass must be given time to cool.

In the next step, the material is lowered into the solution, thoroughly soaked with it and pulled out of the container. The fabric is carefully straightened and laid to dry. When the material is completely dry, you can begin work.

According to the pattern below, the details are cut out of the fabric. The result should be:

Parts A - 10 pcs.
Parts B - 12 pcs.
Parts C - 14 pcs.
Leaves - 2 pcs.

Ten details of leaves are cut out of lace. Now the yellow parts - the petals - can be sold in the desired shape. After that, the tip of the tweezers needs to be slightly warmed up over the flame of a match. With a heated tool, the edges of each yellow petal curl. The resulting blanks are temporarily set aside.

Now let's move on to the leaves. A thin wire divides into seven equal parts. Each piece of wire is wrapped in a strip corrugated paper and then covered with red paint. You can take any paint, however, experienced craftswomen advise using gouache. The parts are left to dry for about two hours. After that, each painted blank is covered with a thin layer of glue and left to dry again.

A piece of cotton fabric is spread on the table. The blanks of yellow petals are laid out on top, face down. A colored wire is placed on the petal in the center. The glue web is cut into equal parts six centimeters long. A cobweb is laid on top of the wire. The next layer is the lace details of the leaves. Everything is covered from above cotton fabric. With the help of an iron, the entire structure is gently heated for 40 seconds.

The leaves are removed from the fabric, and the resulting details are given beautiful shape. Now all the leaf details are assembled into twigs.

You can proceed to the manufacture of the middle. To do this, the button must be firmly wrapped with wire. Then bring the ends of the wire through the eye of the button, and then twist them together.

The button cap is wrapped with holofiber or any other soft material. Fix the result with a thread. On top of the holofiber, the workpiece is covered with satin and again fixed with a thread. The middle is optionally decorated with rhinestones and beads.

By using glue gun workpieces are assembled into a single whole. To do this, the petals are collected in pairs. After that, the resulting pairs of petals are fixed with glue in the middle. When the whole flower is collected, branches are glued to its wrong side. The brooch is ready, it remains to make the base.

A circle with a diameter of 6 cm is cut out of the atlas. The part is smeared with glue and fixed on the back of the flower. The brooch is ready.

So create stylish accessory with your own hands is quite easy. It is enough to show a little patience and diligence, and then the original brooch will certainly decorate and emphasize the image of its owner.

Attention, only TODAY!

The brooch is a great addition to beautiful dress. The history of its use goes back to antiquity, and the methods of manufacture are different. We describe popular types and tell you how to do it. beautiful brooch with your own hands.

Beaded brooch

Start with simple products using one color. It can be a leaf or another simple pattern. First, try stringing beads and identify the desired needle pitch. This is necessary for smooth laying of beads.

They work in the following steps:

Take thread, beads, felt or other materials
Transfer the picture to the base (for example, to felt)
Beaded sheathe contour
Cut off the remaining material from the base.

DIY satin ribbon brooch

Many are interested in: what you can make a beautiful brooch from. It is from this material that bright products are obtained. Ribbons for hairstyles, bows, decorations for jackets are made from satin. And the manufacturing principle, as for other types of brooches.

They not only sew from the tape, but also embroider drawings on the base, as is the case with beads.

Leather brooch

Leather products look stylish and last a long time. If genuine leather burn around the edges, it will take on an aesthetic appearance and an unusual shade, and the resulting decorations need to be connected with superglue.

The skin has good combination with many natural materials(coarse cloth, wood, burlap).

Felt brooch

The material folds well and retains its shape, not prone to shedding. Therefore, the edges can not be processed. The material has specific beautiful view. Looks good with simple elements, such as rough twine.

Instructions on how to make a felt brooch.

We are preparing a couple of shades of felt, floss threads of the same tone, a brooch mount and a vintage button
From felt material we cut out flowers with five identical petals. For example, three beige flowers and one green
Cut out small circles
With threads we make embroidery of the veins of the petals
Sew a mount to the flower on the reverse side
We fold 4 flowers and sew in a button. Get a small bush

Photos of all types of brooches discussed above can be seen in our gallery at the end of the article. Believe me, the beauty you see will inspire you to create.

DIY fabric brooch

From the scattered pieces of fabric, you can create a stylish decoration, making up textures and shades.

The principle of working with fabric is similar to beaded trim. The necessary fragments are sewn or glued onto a solid base. Can be completed with leather, wood, beads and other materials.

On the inside, a pin is attached to the base, designed for a brooch.

A fabric brooch seems more voluminous than a beaded item.

Fixing the edges and taking natural fabric, you can make figures look like origami.

Cabochon brooch

Cabochon - semiprecious stone special processing. Due to this, it has a smooth convex surface and has no edges. A brooch with a cabochon is suitable for a blouse or jacket. First, let's prepare the materials:

cabochon;
beads;
felt material;
crumb of stone;
thread;
glue;
paper;
leather pieces;
scissors;
special fastener.

Now let's give step by step description for beginners, how to make a brooch from the listed materials.

Cut out the base. Its diameter should exceed the length of the finished decoration. Glue the stone to the base.

We take beads of medium size (working with small beads requires experience). We bring the needle to the front of the product a few mm from the stone. We choose a bead. We insert the needle into the felt at a distance equal to the caliber of the beads used, and pull the thread.

The needle is brought out behind the bead, passes inside it and picks up the next one. Then the needle is again inserted at a distance of the length of the beads, withdrawn behind the first two and picks up the third piece. Further, the needle is displayed after the previous two and picks up the next bead.

Thus, we sheathe the entire stone. And we put the beads tightly and evenly.

We embroider the second row using a different shade. We bring the needle out through the felt, pick up the bead and go through the bead of the first row. Again we pass the needle through the bead, which is located under the initial bead in the second row, and bring it out through the initial bead.

Right there: leaving the previous row, we pass through the second bead, pick up another one and pull the thread inside one in the first row. Thus, we sew a circle. It is possible to add additional rows.

We decorate the base with crumbs. And for fasteners, contrasting beads are often taken. We fill the edges of the brooch closely. Lights are excluded. On the side of the crumbs we make 2 rows. The rows go one after the other. You need to work carefully. We sew the second side of the product with contrasting beads in the same way as the first.